Replace the color of the black icon

Hello

I am a photoshop newbster and I'm faced with a pretty easy problem: I would like to replace the icon below color with another color (say green).

I tried both methods I found on the web:

1. Replace Color tool-> does not work with black

2. use the magic wand to make a selection, then the paint bucket to fill the new color. Yes, it looked like a 2-year-old called on the phone.

Can you provide me with a few steps to replace the color on this icon, so it looks decent?

Thank you!

Phone.png

You have luck with this image, because it's on a transparent background. At the top of the layers palette (next to the word Lock) click the grid icon. This locks the transparency. Then just choose your color and paint on the entire Web. Only the pixels that already had the color will pick up the new color, and they will retain the same level of transparency they had in the dark.

Tags: Photoshop

Similar Questions

  • CS4, color replacement, the black to blue

    Am unable to replace the black color to blue.  Help appreciated.

    I have a business in format logo have (Adobe Illustrator), which has

    colors black, white and transparent.  But it contains gray to tones

    the border of the black area.

    Now, in CS4, I want to change from black to blue.  The gray tone should

    be proportional brightness in blue.

    Will have a difficult time to do.  Help, please.

    Tak

    It is easier to make the changes you want to in Illustrator. If the value of Photoshop, you'll have to mess around with different colors to choose and use something like to colorize Hue/Saturation Adjustment Layer (you will also need to increase the lightness to be able to change to another color black)

  • Will not print black after replacing the black ink tank

    After replacing the black ink tank, the printer does not print black data (text or graphic).  I ran printing HP and scan doctor utility and printed assessment page.  The text is printed in a pale blue color. Gray scale apperas block (far right) to have no black content and has a hint of cyan.

    Printer:

    HP Officejet 6000 E609n

    Thanks in advance for any help

    OK because that is a thing of warranty which may be worth dip the printhead as described below...

    (1) get a pan and put 1/2 "of very hot (not boiling) water in the bottom.
    (2) remove all ink cartridges, then remove the print head Assembly.
    (3) gently put the printhead nozzles down in water and soak for 5 minutes.
    (4) remove the print head and gently dry the electrical contacts.
    (5) replace the print head in the printer and then reinstall the ink cartridges.

    http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead-issues/HP-6500-Office-Jet-E709a-black-printer-cartridge-HP-920-not/m-p/447545#M36315

  • How to replace the LabVIEW icon in the upper left corner of the panels?

    Hey Gang,

    We will create an application that will go to customers.  We want to replace the LabVIEW icon in the upper left of the panels with the company logo.  How can I replace that?

    All responses will be appreciated.

    Thanks in advance,

    Roger

    Create the icon you want to there are several editors of ico on the market (I usually use one of the freebies) and save it in your project.

    In the Application build spec select the icon section, clear the default checkbox and choose your .ico in the pop-up.

  • replace the black ink cartridge, but I cannot print anything. Could not load the publication SmartWeb w/o say

    After replacing the black ink cartridge, I cannot print and the printer does not recognize my action. I had a printer who worked three days ago and now with the diagnoses, I wonder to load Smartweb print disc which I did not.

    Can I get a support phone number to get this problem resolved?

    Here's how to contact HP technical support: www.hp.com/go/totalcare (click on printers & monitors, there is a phone number on the resulting page).

  • Can I replace the social icons in the social widget Muse CC 2014?

    I would like to replace the social icons embedded in the Muse Social Widget with a few flat png icons that I have. I can?

    It is not possible to replace the images as widgets are based on the default site API, which generate the side graphics server.

  • DeskJet 932C, you can print with just replace the black ink cartridge?

    My question is basically simple.  The printer DeskJet 932C can operate with only black ink?  Color ink was empty for a while now, but the printer kept working, printing in black and white.  Due to the cost of the ink and the absence of any income available, we just changed the black ink cartridge.  The problem now is that the printer will not print not even black and white.  Do I have to scrape some funds to replace the color ink cartridge, or y at - it another way to get the printer working with just the new black cartridge?

    Thank you in advance!

    Michael Sponable

    Hello

    Your printer can print in black only, but up to a certain point , you need tri-cartouche color otherwise it will not print. It's a little late now, otherwise if you only need to print B & W, a monochrome laser printer is very good and much cheaper to run (in terms of cost per page).

    Kind regards.

  • LabVIEW2009: How to replace the new Icon Editor with old?

    Ladies and gentlemen,

    I really don't like the new icon introduced in LabVIEW 2009 Editor:

    It was tried to "Photoshop shipped" with a lot of features:

    But I don't like it really, because:

    -It has opened EVERY time on the RIGHT monitor (I have three monitors and main monitor in the middle)

    -It takes a lot of time to launch (former editor of icon start momentally)

    d ' usability point of view - it was wrong to place tools on the right side. Often, they are on the left side (and only in the old icons, but also in imageprocessing Editor software like Adobe Photoshop). Also front of interface design user Panel... hmmm... This can be better...

    -some bugs or modified features (for example - KING to select, then press the button - nothing happened)

    etc...

    Is it possible to replace it with an old man:

    Ideal solution will be - switch just between two editors (some features introduced are not so bad).

    Thanks in advance,

    Andrey.

    Go to \Resource\Plugins and rename lv_icon.vi. It is a plugin that is called when you call icon editor, and if it isn't there, LV is the Editor (at least for now. I don't know how many versions to come, they will keep the code).

    Note that the editor is open source, so you can enter and change what you want (or save you time and use the changes others did, as the thread of PJM here. You can also watch other discussions in this group).

  • DeskJet 3070 ceased to print a few days after replacing the black print cartridge

    Please help me, I have HP Deskjet 3070. There works well since then, but I replaced just the black cartridge with original ink and he confirmed that it was a real ink, I printed a few documents and everything was fine and it's just less amonth ago.

    But unfortunately I turned on the printer a week later, but it prints, it only passes through the paper as if it is printing but instead he brings her on a white sheet.

    The task of mentenance using I could see the State of health, says the good. Show full of ink cartridge ink level. Device report - derniŠre indications affixed some pink, blue, yellow rectangles and the printed report print 4 holders.

    I noticed someone has posted a simlar here question one obtained help same day via private message that he has fixed his problem, I commented here a week ago and had asked for help, but have had no response to date.

    Today, I installed a new black ink, thinking that he could be in ink, but she does not always print anothere.

    Please help me.

    New replacement printer arrived today with the new inks, installed game machine with the new inks and everything works as it should. Old machine is to immerse for recycling as advised.

    I'm relieved and I appreciate the after sale HP just rendered services. Although I am a little worried and now fear that it could happen again "after the guarantee" since no clear explanation is given in what concerns what could have caused the failure. And judge with an option of replacement is the best solution, it seems like the cost of the den could be greater than the value.

    Finger is crossed, I hope that it will serve this time or at least give reseonable service before getting on my nerves.

    Thank you HP.

  • C7520 replacing the black ink cartridge

    I have a photosmart printer.  The black original ink cartridge is marked the installation program and is soon exhausted.  Replace with a 564 black cartridge or the configuration of term refers to something else?

    Hello

    Please report the problem. Let me tell you the easiest way to find what slot will be what cartridge.

    The symbol on the location of the cartridges must match the symbols on the cartridges. Therefore a symbol as Pentagon/home in on the photo cartridge black which is bigger compared to the other cartridge and right most end, where as the symbol of the black cartridge ink is like a bow tie left most end. hopefully this will help.

    To help an employee of HP.

    * Say thank you by clicking on the "Bravo!" Star"located on the left *.

    * Make it easier for others to find solutions, marking my answer to "Accept as Solution" if it solves your issue.*

  • Dynamically replace the spark icon button when you click on

    I'm looking to turn 'play' and the button icons 'pause' button in a video player, I developed.  It is a packaged application IOS so "ToggleButton" use is not recommended by Adobe. It is not mobile optimized.

    When you click on the button of the current icon should be replaced by another dynamically.

    How to do that generically - in essence, with traces hard coding to the assets inside the skin?

    I see a lot of examples where you can move an icon to a skin - like this http://blog.flexwiz.net/tip-easy-spark-icon-button/instance.

    But how did you then fail over to another icon on the fly when the user clicks on the button?

    Think I see how.  The value of the element of style "icon" in the AS button click handler.

    btnPlyPause.setStyle ("icon", "path_to_asset");

    Now just the logic of maintaining awareness of the State in which I am currently in - play or pause so I can choose the icon on the right.

    Cool.

  • HP Envy 5530: I replaced the black cartridge in my printer. She refuses to print in black only now.

    I ran all the standard tests. Black printing will produce only on cartridge color if used singularly. Print heads have been cleaned. Printer has updated its auto preset and no analysis of a printed item will be printed nor will be a printed document or the other. All prints have tried so far were in black ink. All worked perfectly until the change of the ink cartridge. Replacement cartridge used was a standard 301 HP black cartridge.

    Try here.

    http://support.HP.com/us-en/product/HP-envy-5530-e-all-in-one-printer-series/5304881/model/5304882/document/c03765731/

    Let us know.

  • Replace the microphone icon with the icon of appeal on the lockscreen - Marshmallow 6.0.1

    When I was on LP, I found the call of the lockscreen very useful shortcut. Now, after the 6.0.1 update, the icon seems to be replaced by the abbreviation 'OK Google'. Is there a way to get the shortened rear callls?

    Go to settings - applications, press the machine and select applications by default. There, under assistance and voice input, set help app votes to zero.

  • What is the black icon by a dashed line on the top "do follow" on my browser?

    It is also on top of the AVG toolbar. Although it has an 'X' in the upper right corner he died not. the white dotted line model is similar to the ramparts of a wall. He has appeared recently. I uninstalled the download free Mozilla and reinstalled but no change.

    I use a suite of different software, so I'm not familiar with the functions of the AVG toolbar. Sometimes pointing your mouse on the icon will reveal its function, or there could be some help pages on the site of AVG with the details.

  • I just replaced the black cartridge on my HP Officejet 6310 printer and get a message that I need to replace the cartridge. What is the problem?

    Officejet 6310 printer will not print.

    Again - the cartridge and DATED?  Did you remove all plastic covering the nozzle before insert?  Have you read in the Quick Installation Guide that you have when you first set up the printer?

    If still no joy and it's a genuine HP cartridge, contact HP and get them to replace it.

Maybe you are looking for

  • Need to register an account

    I am just posting this because I need to register so I can respond to an existing question, and it looks like "confirm registration" is the step after that. I couldn't find a stand-alone registration page anywhere.

  • unlock Bios password hp pavilion dv7-1128ez

    Can you please help me to unlock the Bios password hp pavilion dv7-1128ez. The unlock key is: 54708837. Thank you

  • USB 6008 DAQ scaling

    Hello I use a USB-6008 to read signals from analog voltage to a device I built. The task is configured with a single reading finished with a range of + -10 volts. There is no scaling in the task or in the block diagram, but when I acquire data in a P

  • Windows is not genuine

    Original title: product key problemI restored my laptop again because of virus issues, and when I give my product key massage pop ups when I start my laptop in my window saying: it's not true resolve he be kind enough to help me with this.

  • Control chart SPC not showing CL UCL or LCL

    Hi people, I have a spc control chart in my application.  However for some reason any of the UCL, CL and LCL are not displayed on my chart. A brief review of the facts: This is an application for people who enter the measurement data in several numbe