Replace the DVD drive with lightscribe on Satellite M60

Similar Questions

• To replace the DVD drive with the second HARD drive on the Probook 6570 b as for the BIOS setting

  After you replace CD/DVD player with HARD drive in the Bay of correspondence, I had a problem with the BIOS. After starting, I received a message 'there is not a boot manager' and CTRL + ALT + DELETE. So is that posible F9 and start to use Option manually hard. Please tell me what I should do to fix this problem.

  Thanks for your advice. I remember what I had to do in the BIOS. I had to choose the Boot Option and excludes "Boot from Bay upgrade". That's all. Of course subsequently followed "save all".

  in respect

  Military

• To replace the DVD drive with the second HARD disk on the pavilion DM4-2000

  Hello

  I would like to remove my laptop DVD drive and replace it with an SSD. It seems that the DVD player does not use the standard format of pins SATA for hard drives, rather than use a slightly smaller connection. Is it possible to connect a laptop SATA drive this in any case and if so, how?

  Any help appreciated,

  Tim

  You need a car adapter. Your laptop uses 12.7 mm optical readers and you need this card:

  https://www.jacobsparts.com/items/HDDBAY-01/

  Here is the Service Manual:

  Manual

  See Page 45 for replacement instructions.

  You place the additional hard drive inside the adapter, then swap the front to make look it good.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• I have a hp 500-164, can I replace the dvd multi with lightscribe disc drive

  I would like to install a cd/dvd lightscribe burner will of lite - was this computer?

  Hello

  Must correspond to your drive lightscribe internal perspective of CD/DVD.  Review of thisarticle How to HP.

  The issue that you might encounter is the Lightscribe software.  You can download the software from this site or this site. HP's Lightscribe software on this link.

  In addition, you will need a support Lightscribe application. Check with Roxio or Cyberlink to support the application.

• How to replace the DVD drive on a series of Satellite?

  Could someone give me instructions how to replace the DVD drive?
  I unscrewed a few screws in back and two under keyboard and I still can't get out.
  Any suggestions?

  Thank you
  Select this option.

  I found it!

  It's the single screw! It is under the flap of the memory.

• Is it possible to replace the hard drive with an SSD? or would it be too expensive?

  Is it possible to replace the hard drive with an SSD?

  or would it be too expensive?

  Yes.  There are several alternatives.  I found a way relatively inexpensive, using a map of mSATA (very small SSD) and an adapter to connect it to the connector IDE 44 pin internal of my PowerBook.  It works very well.  Rather than repeat what I posted previously, you can watch these two topics (which also has good info, other users)

  Re: This win to install a SSD drive in a PowerBook G4?

  Re: SSDS  (my post is halfway - "this is how I did with my trusty Pismo...) »)

  FYI - I have used the adapter is even cheaper now

  https://www.Amazon.com/GP/product/B009BA8V4M

• Re: Tecra A9 - 11M - replace the HARD drive with a larger

  I have a Tecra A9 - 11 M with Windows XP Professional installed. I would like to replace the hard drive with a larger drive and install Windows 7 Professional.

  Any suggestions on recommended records say 500 MB?

  Difficulties to install Windows 7 on this model?

  Hey,.

  > Any suggestions on recommended records say 500 MB?
  I assume you mean 500 GB and not 500MB, right? ;)

  Well, the Tecra A9 already supports SATA interface and there is no limit of capacity on SATA interface, so you can install a 500 GB HARD drive or more (750 GB, etc.). Just make sure that it s 2.5 SATA HDD.

  You can choose each brand of HARD drive because each model will not work. You can buy a Toshiba HDD, Western Digital HARD drive or another. No problem ;)

• Qosmio X 500 - 10W - can I replace the HARD drive with another?

  Hello

  I have a Qosmio X 500 - 10W with two drive HARD Toshiba MK5055GSX 500 GB 5400 RPM 8 MB? SATA II but is one of the hs so I'm wondering if I can be replaced by a more powerful style, drive HARD 750 GB 7200 RPM / min 16 MB Toshiba courses?

  Thank you

  Hey,.

  Your question is a bit hard to understand, but I think you want to replace the HARD drive with another (faster) model, right?

  Well, that s no problem. 7200 RPM hard drives works, they are a little stronger, but they're faster so if you need more performance without problem.
  750 GB or more are also no problem because the SATA interface is not the limited capacity. Theoretically 1 TB or more should also work.

  Anyway, you can buy the 750Go you mentioned that it will work. :)
  ?

• replace the dvd drive omni 200

  I found the info for a 200 MS, but need instructions to replace the dvd drive in my HP Omni 200 5480.  or where to find it.

  Please, I beg you!

  Hello

  There is a HP guide (including a video preview) to replace the optical drive on the following link.

  http://support.HP.com/us-en/document/c02162108

  Kind regards

  DP - K

• ThinkPad Edge S430 - is possible to replace the hard drive with an ssd?

  Hey, Lenovo,.

  I bought a Thinkpad Edge S430 and wonder if it is possible to replace the hard drive with an ssd?

  Kind regards

  Mikael

  
  

• Satellite M30 - error message after replacing the DVD drive

  Virgin, excused my English ;)
  I have a satellite m30 and I replaced the DVD-cd-rw drive in series with a SLIM NEC ND-6650 DOUBLE LAYER, DVD time bios gives me error
  0203: failure IDE #2
  Is it possible to remove this message?

  Hello

  As far as I know that this message can not be eliminated and it happens every time if you want to use the drive is not compatible. Always is it that all readers may not work with all models of laptops.

  In this case, fundamental problem is the pin assignment. It is not the same in all players.

  Good bye

• I need to replace the dvd drive in my touchsmart iq505. where can I buy the part?

  I have trouble finding the spare part for my touchsmart iq505 dvd player.  the original no longer works. This part yet or can I replace it with something more recent?    Thank you!

  Hello clevermom,

  I understand that you are looking to replace the optical drive of your desktop HP TouchSmart IQ504. The optical drive you are looking for is no longer provided by HP, but I don't have any information that will allow you to get elsewhere. The optical drive is '8 X SuperMulti Slimslot SATA interface DVD-ROM optical drive - 12.7 mm height form factor, read all medai CD-ROM and DVD-RAM discs,' and I fouhd several available on internet by searching by part 467613-ZH1 number.

  I hope that I have answered your question to your satisfaction. Thanks for posting this question on the Forums of HP. Enjoy your weekend!

• replace the dvd drive pavillion 1157

  The DVD in my HP Pavilion p7 player - 1157c is having a problem reading the CD/DVD, once they are placed in the drawer.  That's what I've done so far:

  • I reinstalled the cables although they were not cowards.
  • Uninstalled the DVD driver and restarted the computer and Windows 7 64 b reinstalled the driver.

  The drawer will always open and close and makes normal sounds when you first insert a CD, but it stops after a few seconds.

  After that these things did not work, I decided to buy a replacement for the CD/DVD drive last night and went to install it this morning but it seems that the power supply works in the way and I can't get the DVD player.   Y at - it something for the old DVD out without removing the power supply?   I'm usually not mechanically challenged but this has me confused.

  Thank you very much

  Hello

  The optical drive can be removed at the front of the PC - see the guide on the following link.

  http://support.HP.com/us-en/document/c02905554

  Best regards

  DP - K

• How to replace the hard drive with an SSD on a model of end 2011 MacBook Pro 15 inch, A1286

  Hello

  I would like to replace the hard drive on my model of end 2011 MacBook Pro 15 inch, A1286 with a disk solid state drive (SSD). First of all, I would like to know if this is possible. Second, what is the best way to do it? I'm under the Yosemite OS if that makes a difference.

  Here are some technical details of my current system:

  -MacBook Pro 15 inch, late 2011 model A1286

  -OS yosemite

  -16 GB of memory/RAM

  -Currently using stock HD

  All instructions step by step would be helpful with what software should I use to make backups of my current operating system (e.g., SuperDuper). I would also like to know what tools or material I need like type of screwdriver, cables to transfer data to the SSD, etc.. My goal is to not have to reinstall each app one by one on the SSD, but if that's the only way to do it then it's okay.

  Thanks in advance for any help.

  You can see instructions OWC here. Tools are mentioned in the discussion (I used a plastic knife picnic with the stronger edge somewhat blunt for nylon pry tool). I suggest you invest in one of these external fences. Install the SSD in who and clone internally externally with CarbonCopyCloner or SuperDuper. Then move the external drive of the internal drive after the start of the SSD in the external to confirm the operation.

• Replaced the optical drive with an SSD, but how do we install Lenovo Windows 8.1 on it?

  Hey guys,.

  Ive recently replaced my optical drive with an SSD, but the problem is now how to clean install a lenovo legit 8.1 on windows?

  Thanks in advance!

  RedKoi wrote:

  Hey guys,.

  Ive recently replaced my optical drive with an SSD, but the problem is now how to clean install a lenovo legit 8.1 on windows?

  Thanks in advance!

  For clean installation try to download Microsoft Media creation tool first. Using the tool, you can download a copy of the Win 8.1 installer. Save 8.1 only and not the PRO. During installation, the installation program does not the product key but it detect automatically your bios.

  You will need to place the ssd instead of the original location of the hard drive to boot successfully.