Replace the UCS - b2xx HARD drive

We have a UCS with blades B200.

One of the HARD drive led STATIC amber, (it is a HARD drive failure according to the documentation), but UCS Manager did no show any alert.

My first question is... I see not awake in the UCS Manager? I have to turn on any kind of follow-up to the HARD drive?

The HARD drive was reflected with RAID 1, then why has decided to install a replacement.

We extracted the defective HARD drive and inserted a new (because they are Hot Swap we did with the server on).

But now the UCS Manager is showing the HARD drive as a disc UNKNOWN, so he did not recognize it

We rebooted the server with no luck.

What should I do any kind of procedure of the UCS to recognize the new drive and rebuild the RAID 1 mirror?

Thank you

Hello

Which firmware version are you running?

In versions prior to 2.0, we had has very little followed HDD and reports. The status UNKNOWN to the driver after installing a new is also due to a bug known in versions 1.4 or previous.

If you see the normal LEDs on the disc, then you know that the re - build is finished, you can also restart the blade and enter the optional ROM of LSI, and check the status of the drivers.

. / Afonso

Tags: Cisco DataCenter

Similar Questions

  • I can't recover my system (DV6000) using recovery discs after replacing the card mother/HARD drive

    I have a DV6408nr (windows vista Home premium) I had to replace the motherboard and hard drive. When installing the new motherboard (same part No.: 443775-001) and insert the recovery (bought from HP) discs that I have, I received an error message stating that the PC could not be recovered using my disks. The serial numbers on the label service and in my bios do not match. When I entered the serial number of my bios in HPpartsurfer, he said that the system is a DV6449us. I already checked my RAM and HARD drive is brand new/not formatted. I used these recovery discs (manufacturer: 483905-003/483906-003) successfully before on other flags of DV series. Is there a reason why these discs should not work on two motherboards in the same system with these similar specs? What should I do to get my system recovered?

    The number of the motherboard and other show information in the bios of the new Commission?

    The numbers do not match the recovery disks or information is missing in the bios.

    If it's really a mismatch, then you will need to find the good recovery disks or use a Dell installation disk operating system and use the product key from the sticker on the laptop to get activated, and then manually install the drivers.

    If the bios tattoo is damaged or missing information only a used HP Center can then fix the tattoo.

    check your private messages

  • NB550D - replace the RAM or HARD drive without voiding warranty?

    Hello!

    I noticed, that generally, Toshiba users replace their HARD drives and RAM memory without voiding the warranty.

    But I'd be happy to get official confirmation if NB550D netbook.
    Can I pass without problem, my material in this model?
    If it is relevant, I'm of the Poland.

    Thank you in advance!

    Hi dude

    Since it is only a user to user forum you will get no official confirmation here
    But you're right. The RAM and HDD Upgrade or replacement will not void the warranty.
    These pieces are extensible, and as much as I know that is mentioned in the user manual.

    Greetings

  • a1140n flag replacing the SATA II HARD drive?

    SATA II disks can be used to replace a SATA drive failed in the above desktop machine?

    The specifications for the machine indicates SATA, but I'm not sure the new II will work in the system.

    Thanks in advance.

    Yes that correct, there is no reason why technical SATA-300 (SATA II) will not work in the system SATA-150. Like most BUSES and protocols, the specifications call for SATA-300 to be backward compatible with SATA-150.

    I read this somewhere a bit backwards: the HD is not reach anywhere near the 300 MB/s transfer speed which can be able to SATA-300 interface, test to see the

    up to 35 MB/s - 135 MB/s for non-RAID drives and up to 225 MB/s for readers RAID0 configuration. 150 / 300 MB/s is SATA ports

    maximum transfer rate, not the maximum hard disk transfer rate. This means that the port can handle up to this number transmittions,

    but this does not mean that the hard drive can achieve this goal.

    If the faster hard drives can only max to 135 Mbit/s it makes you wonder why SATA-600 is developed. I would get a HARD drive with the largest affordable cache on this subject.

  • Satellite L70-A-139 - guaranteed zero when removing the cover for the RAM and HARD drive

    Hi all

    I have a Satellite L70-A-139 youcef.
    And at the back of the laptop, there is a cover that is fixed with a screw.

    Wil I void the warranty when I unscrew and take a look?
    I want to upgrade my HDD to SSD.
    The motherboard supports Sata III: D.

    Thank you!

    No, the mandate must still be valid.
    There is a removable cover at the bottom of the unit as shown here:
    [Toshiba Satellite C70 / C75 / C70D / C75D / L70 / L70t / S70 / HARD S70t drive replacement procedure | http://aps2.toshiba-tro.de/kb0/CRU3703HG0000R01.htm]

    Then you should be able to upgrade the RAM and HARD drive.
    I think this info should be mentioned in the user manual too.

  • Satellite C650D-112 - reinstall Win 7 after the failure of HARD drive

    The 320 HDD on my C650D-112 18 months, failed last week.
    I replaced it with a 128 GB SSD and it now boots into Windows 8 preview in about 10 seconds!

    I have a copy of the disk HARD original including the recovery of HARD drive Partition, but no recovery disk.
    I can't reinstall drive would work I had been a responsible adult and created the disk when the laptop is new because the disk is smaller.

    Is it possible to reinstall the original Windows 7 Home Premium operating system of the copy of the HARD drive recovery Partition?

    > Is it possible to reinstall the original Windows 7 Home Premium operating system of the copy of the HARD drive recovery Partition?

    No, to my knowledge, this is not possible, even if you copy the contents of the recovery of HARD drive on the new partition on the new HARD drive, HARD drive recovery option does not appear in the advanced boot menu.
    So, it seems you need to order a new drive to get here:
    http://backupmedia.Toshiba.EU/landing.aspx

  • Satellite P850 - replacement of 1 TB HARD drive

    Hi all

    my laptop is 1 month out of warranty and keep Windows telling me my HARD drive is about to fail and I'm not sure on what disk HARD I need to buy to replace, I'm not in the best financial situation at the moment and I'm looking for the most cost-effective way of backing up my computer and install a new HARD drive.

    I looked into buying a drive enclosure HARD 2.5 "and that he was going to create a clone of the original HARD disk, but if anyone who knows better if they could let me know. I have a 2 to external HARD disk, I was able to use to backup everything, but I don't know how to do and the cloning machine just seams easier as after his clone new HARD drive I just replace it in the laptop, I found a cloning case that comes with the son and the software for about $50 and a 1 TB drive HARD Hitachi for $80 , but I do not know which fits into HARD drive my laptop.

    Any help is much appreciated as I am a little upset my laptop $1400 a too serious a problem 1 month out of warranty, cheers Jon.

    > I looked into buying a disk enclosure 2.5 "HARD and he's going to create a clone of the original HARD disk, but if anyone who knows better if they could let me know

    It was sounds good to me.
    In the past, I went from the HARD drive to SSD drive and I also clone HARD drive partitions and moved to SSD drive.
    After that, you'll need mark the system partition active (on the external HARD disk)

    Regarding the 1 TB HARD drive:
    I think the HARD drive needs to be supported, because the controller SATA isn't limited to one size specific. This is why it is not a big problem to make it work.

  • Low beginning on Satellite M40-145 after changing the 160 GB HARD drive

    Hello

    I own a Satellite M40-145 since 2005. After more than two years without any problem, two weeks ago the 80 GB hard drive to the original address has been damaged. So I had to replace it with a new, 160 GB (this replacement was made in a store because it's out of warranty).

    I used successfully on the new HARD drive recovery CD to install Windows XP and all the drivers (just as when it was new).
    I used Partition Magic to create a partition of D for data. Also, I installed Office 2003, Norton 360 and connected to the Internet.
    It worked quickly with only small problems than perhaps with little patience I could fix: as this Bluetooth hardware is not detected and the wireless switch began with the lights off even being in the position we (it worked with new just switching out-lit again). But suddenly, after only one day of use, Windows starts became very slow. It takes about 4-5 minutes until it is possible to use the laptop.

    Now, I tried many possibilities to solve the problem, but always ending on the same problem: I used the recovery CD again and try to use the computer with or without updates (I thought that maybe the problem was due to a bad update), with and without Internet access, etc.
    I also tried in vain the program Microsoft Bootvis to try to speed up the startup, etc.

    I even created an image with Acronis to only with XP and Office running fast, so that I could install it again and try new things.
    I also tried to clean the registry with various programs like CCleaner, TuneUp 2008
    Also the defrag JKDefrag and PageDefrag. But always returning to the same problem after a few days of good conduct.

    I don't know what else I could do. I wonder if maybe the new HD is damaged (although I test and no error or no damage was detected) or if the update BIOS might resolve this problem (I'm not and that's a big risk).

    Please, could someone help me?
    Thank you very much for your attention.
    Pablo

    In my view, that there is nothing wrong with the software or all drivers on you laptop.
    I think the key is the enormous size of the HARD drive.

    The difference between 80 and 160 GB is huge.

    To my knowledge, the BIOS supports a limit on the size of HARD drive and I really wonder why the 160 GB HARD drive has been recognized by the BIOS.

    However, I think you should test a 100 GB, 120 GB HDD if the same question perhaps if poster using a HDD a size smaller.

    Best regards

  • laptop Compaq CQ58: id of failure to the dst short hard drive RGF0R0

    my notebook Compaq CQ58 3 year, husbands, froze and wouldn't respond, after a few hours I force it down by pressing the power button, when I tried to start it up again once he went int automaticic repair, it took more than 24 hours.

    but the computer continues to freeze and go into the auto repair each time and was unusable.

    I don't have a recovery disk, none came with the computer and stupidley has not created a when the computer was new. being the only other computer that I have a windows vista I could not create one on this machine.

    As their was anything important stored on the computer I decided to reset the computer hoping that would solve the problem.

    I followed the instructions and the computer seems to be going through the motions to reinstall when he got stuck in a loop of

    the HP points logo swirling

    a popup with the date and time and please wait

    a white screen with the top of the window cmd at the bottom left of the screen

    back to points logo and swirling HP

    a popup with the date and time and please wait

    a white screen with the top of the window cmd at the bottom left of the screen

    After 48 hours I force crashed computer

    I ran the race test that everything happened except the short DST hard drive

    Falure ID: RGF0R0 - 69781:-MFKT1F-60WU03

    This means that the hard drive needs to be replaced and if so should I also a recovery disc, the laptop is out of warranty

    Thanks in advance for any help

    Fiona-s wrote:

    I ran the race test that everything happened except the short DST hard drive

    Falure ID: RGF0R0 - 69781:-MFKT1F-60WU03

    This means that the hard drive needs to be replaced and if so should I also a recovery disc, the laptop is out of warranty

    Thanks in advance for any help

    Hello Fiona-s,

    Thanks for posting in the Forum of Support HP!

    I'm afraid that the HARD drive has failed - the question is material one and all simply restore/reinstall will not solve it. Yes, you need to replace the HARD disk new or better with the SSD. SSDS are up to 10 times faster than hard drives:

    > http://ocz.com/consumer/ssd-guide/ssd-vs-hdd

    > https://en.wikipedia.org/wiki/Solid-state_drive

    There are more than 100 manufacturers and sellers SSD, but personally, I would choose Samsung, Intel, Toshiba, or OCZ ones.

    Microsoft Windows 7, 8.1, and 10 have supported for SSDS. Vista and XP - no

    You will need a recovery media to restore the windows once you have installed the new SSD or HARD disk.

    You can get possible by contacting HP Support. Here's how:

    > http://support.hp.com/us-en/document/bph07143

    > http://www8.hp.com/us/en/contact-hp/contact.html

    > http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html

    Feel free to post if you have any other questions.

  • Windows 7 will not activate with the OEM key, after the failure of HARD drive.

    Hello

    I was recently asked to repair my brother DELL laptop.  The HARD drive failed and the system unusable.  I replaced the HARD drive and installed Windows 7 Home Premium x 64 (earlier version of windows) from my own installation media.  The recovery partition had survived the failure of HARD drive, I would have just cloned that and used, but this was not an option in this case.

    The problem that I am experiencing, is that windows don't will not activate, saying that the key is not valid.  I was told that installing Windows 7 media would work with a retail or an OEM key, but that doesn't seem to be the case.  The key OEM I use, is from the computer it came from originally, and the only material change is the new HARD disk.

    I try to avoid ordering an OEM Dell installation CD, as which costs money (I already have my own installation CD) and takes time (why do they have them available for download?).

    Any help would be greatly appreciated!

    Thank you

    Brian o '

    Here is the information that the Microsoft Genuine Advantage Diagnostic Tool spits out:

    Diagnostic report (1.9.0027.0):
    -----------------------------------------
    Validation of Windows data-->

    Validation code: 0
    Code of Validation caching online: 0x0
    Windows product key: *-* - QCPVQ - KHRB8-RMV82
    Windows product key hash: + Rj3N34NLM2JqoBO/OzgzTZXgbY =
    Windows product ID: 00359-OEM-8992687-00095
    Windows product ID type: 2
    Windows license Type: OEM SLP
    The Windows OS version: 6.1.7601.2.00010300.1.0.003
    ID: {AC8177E3-D2B0-45ED-B79B-E129894262D3} (1)
    Admin: Yes
    TestCab: 0x0
    LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Product name: Windows 7 Home Premium
    Architecture: 0 x 00000009
    Build lab: 7601.win7sp1_gdr.130104 - 1431
    TTS error:
    Validation of diagnosis:
    Resolution state: n/a

    Given Vista WgaER-->
    ThreatID (s): n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002

    Windows XP Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    File: No.
    Version: N/a, hr = 0 x 80070002
    WgaTray.exe signed by: n/a, hr = 0 x 80070002
    WgaLogon.dll signed by: n/a, hr = 0 x 80070002

    OGA Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002
    OGAExec.exe signed by: n/a, hr = 0 x 80070002
    OGAAddin.dll signed by: n/a, hr = 0 x 80070002

    OGA data-->
    Office status: 109 n/a
    OGA Version: N/a, 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

    Data browser-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
    Default browser: C:\Program may Explorer\iexplore.exe
    Download signed ActiveX controls: fast
    Download unsigned ActiveX controls: disabled
    Run ActiveX controls and plug-ins: allowed
    Initialize and script ActiveX controls not marked as safe: disabled
    Allow the Internet Explorer Webbrowser control scripts: disabled
    Active scripting: allowed
    Recognized ActiveX controls safe for scripting: allowed

    Analysis of file data-->

    Other data-->
    Office details: {AC8177E3-D2B0-45ED-B79B-E129894262D3}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-RMV8200359-OEM-8992687-000952S-1-5-21-1225630707-1574482703-4192685535Dell Inc.. Inspiron N5030 Dell Inc.. A02 20100913000000.000000 + 00032933F07018400F804090409Time(GMT-05:00) Standard is03DELL WN09 109

    Content Spsys.log: 0 x 80070002

    License data-->
    The software licensing service version: 6.1.7601.17514

    Name: Windows 7 HomePremium edition
    Description: operating system Windows - Windows (r) 7, channel OEM_SLP
    Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
    ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
    Extended PID: 00359-00178-926-800095-02-1033-7601.0000-0892013
    Installation ID: 004806170012218410865063155553272544088463952332351022
    Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
    Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
    Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
    Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
    Partial product key: RMV82
    License status: initial grace period
    Time remaining: 43080 minute (s) on (29 day (s))
    Remaining Windows rearm count: 3
    Trust time: 31/03/2013-02:23:35

    Windows Activation Technologies-->
    HrOffline: 0x00000000
    HrOnline: n/a
    Beyond: 0 x 0000000000000000
    Event time stamp: n/a
    ActiveX: Registered, Version: 7.1.7600.16395
    The admin service: recorded, Version: 7.1.7600.16395
    Output beyond bitmask:

    --> HWID data
    Current HWID of Hash: MAAAAAEAAgABAAIAAAABAAAAAgABAAEAeqgI7yp8en9YkLIC/j7Shg44gAGAPUbK

    Activation 1.0 data OEM-->
    N/A

    Activation 2.0 data OEM-->
    BIOS valid for OA 2.0: Yes
    Windows marker version: 0 x 20001
    OEMID and OEMTableID consistent: Yes
    BIOS information:
    ACPI Table name OEMID value OEMTableID value
    APIC DELL WN09
    FACP DELL WN09
    HPET DELL WN09
    MCFG DELL WN09
    WN09 DELL SLIC
    OSFR DELL WN09
    SSDT PmRef CpuPm

    you use an OEM SLP key that only works with the manufacturers recovery media.

    change the product key to that on computers of COA
    Click Start, type slui3, press ENTER.

    Additional information:

    Computers, which are built by large manufacturers provided with pre-installed Windows are supplied with 2 two product keys:

    OEM SLP: This key comes pre-installed in Windows, when it comes to the factory. This key is designed to work with the special instructions isn't on the hardware of this manufacturer. Then, when Windows was installed using the OEM SLP (in factory) Windows 7 key leans on the motherboard and he sees special instructions and activates. (that's why you had no need to turn on your computer after you brought it home)

    COA SLP: it's the product key that you see on the sticker on the side (or at the bottom, [or in the battery compartment]) of your computer. It is a valid product key, but must be used only in certain situations (for example, if the OEM SLP key stops automatic activation for a reason any). The key must be activated by phone. (Note: all manufacturers that use the SLP OEM system are bound by contract to include a certificate of Authenticity sticker (COA), which has a COA SLP key, on the computer)

  • Satellite P100-354: how many rpm has the 160 GB hard drive

    How many rpm has the 160 GB hard drive?
    And. It is a SATA?

    Hello

    to answer your questions:

    The disc has a speed of 4200 RPM and YES it s a SATA drive.

    Hope I could clear your mind. :)

    See you soon

  • Satellite M40X-112: can I use the 160 GB HARD drive

    I have a Satellite M40X-112 lapptop and I want to upgrade my 80 GB to 160 GB internal drive.
    How is know possible? (Toshiba hotline cannot give me an answer only that a 80 GB drive has been tried with these lapptop!). Anyone have experience with that?

    I read several statements here in the forum about HDD upgrade on the M40X and it seems that there is a limitation in the BIOS.
    The BISO will not recognize the 160 GB HARD drive and that is why you will be not possible to install an OS or you will not be able to boot from this device.

    Please use the "advanced search" from this forum to find discussions on upgrading the HARD drive.

  • How to set the password for HARD drive?

    Hello

    Could someone help me please by setting the password for TOSHIBA STOR. E ART 3 (1 TB 2.5 ") HARD DRIVE?

    Hello

    I n t have this external HARD disk, but Toshiba pre-installed some additional software on this subject for the creation of HARD drive password?

  • Available to add the second internal hard drive to 17-e117dx

    Hello

    Can you let me know, if there is provision to add the second internal hard drive for HP Pavilion e117dx 17.

    If so, one) is there requirments or the specifications of the hard disk (any make or model); (b) what equipment will be needed and where I can get to and c) Finally will be doing so make sure the warranty of my laptop HP Sub

    HP Pavilion

    Product: F9J38UA #ABA

    Model: 17-e117dx

    Thank you

    Not in the way you probably do. Here is the Service Manual:

    Manual

    See Page 50. Unlike the Envy 17 and Pavilion dv7, Pavilion 17 has that a single hard drive Bay. The only way to add a second hard drive is to remove the DVD (optical drive) and insert a DVD to the hard drive bay adapter. The manual shows how to remove the DVD player and you can buy the adapter at amazon.com or jacobsparts.com. Note that this is a 9.5 mm thick disc, not a 12.7 mm. Both types are available. I do not recommend the adapter DVD player solution because you lose the use of the optical drive, and also because the interface of optical drive is usually not as fast as the main hard drive interface. Always fast enough for simple storage and you can run a video of her, but you do not want to edit the video of this disc, for example.

    https://www.jacobsparts.com/items/HDDBAY-02/

    If you decide to go the route of adapter DVD I would buy a large capacity 5400 RPM SATA 2.5 inches wide and drive hard thickness 9.5 mm. No sense in buying a reader more expensive high-performance.

    http://www.Newegg.com/product/product.aspx?item=N82E16822178006

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Qosmio F10 - cannot change the type of HARD drive in the BIOS

    I want to change my hard drive, but the category in the BIOS is not editable.

    I can not change the type of hard drive in the BIOS on my desktop PC.

    Hello

    And you want to change in the BIOS now?
    I put t know which option you mean exactly

    The drive in the BIOS, you can change t. That's why you should buy a new

Maybe you are looking for

  • Headset is not recognized

    Headset is not recognized

  • heat re 7.1 issue 24 "with new SSD

    Hi, I just had someone swap on stock Mac HD with a Samsung SSD in an iMac 7.1 - maybe I just never paid attention but the case of aluminum around the upper part of the flanks and back it the feeling, it feels very warm to hot... I have iStat widget a

  • Computer laptop Windows XP do not hibernate / hold

    Recently, I restored my computer to a previous checkpoint because he was very slow and I knew it was an easy way to solve the problem.  However, several problems have emerged from this system restore.  One, when my computer restarted, it went for the

  • WRT54GS cannot connect after reset of the router

    Hi guys, so I use this modem that my friend gave me, works very well in its place. I wanted to reset the modem for reasons that I can't remember. (I am connected via a modem cable btw). The internet was working fine when I paste like a leech wireless

  • Someone told oauth2 Microsoft working on BB10?

    My application doesn't oauth2 to Bitly and Google accounts and now I try to do the same with a Microsoft account (OneNote in this case, but intend to in the future: OneDrive). The problem is that when I try to add my app on Microsoft development port