replacement drive to install vista 64.

I am a real novice here but I need to do an inplace upgrade apparently. to do this, I need vista service pack 2 cd/dvd installation which I unfortunately.  I went to the hp download page but I didn't know he wrote for me, make some links for software, hardware and drivers I need a driver download or recovery one? can someone please?

Hello

You can order a set of replacement recovery disks using the link below.

http://support.HP.com/us-en/document/c00810334

If you have a problem with this link, order them directly from HP.

If you live in the United States, contact HP here.

If you are in another part of the world, begin here.

Kind regards

DP - K



Tags: HP HP Desktops

Similar Questions

  • Compatibility problem XP Dell Wireless 1395 mini-map WLAN driver currently installed Vista Home Edition 32 bit Service Pack II

    Hi, my OS is Windows Vista Home Edition 32 bit Service Pack 2 - installed on XP by the owner without first unintalling XP.  Although my Device Manager lists the mini-map Dell Wireless WLAN 1395 as working properly, what Windows says that it has stopped working correctly because the driver installed is not compatible with my current operating system (just one of the many questions).  Although I can get online wireless most of the time, IE and Google Chrome often freeze and there are a few minutes, I got a blue screen - not for the first time - that shut down Windows.  I note the other error message information that a fatal error has occurred that required Windows stops, so am not sure that the two problems are related or not.  I tried to find a compatible driver for what I assume is a WLAN Mini card for the original XP OS on the compatibility of Vista site, but there is no driver is listed for the Dell Wireless WLAN mini-map 1395.

    I have the Vista installation CD, but not the verification code necessary to reinstall.  It will appear somewhere on this computer under the program or the ancillary system (information) available to administrators?

    Just out of curiosity, there is a feature of rectangular white USB printed with the name "Biogear" attached to one of my ports, although he is not listed among devices on my computer since the computer laptop original owner died and I can not ask what is its purpose or what program it was meant to facilitate. I tried to remove it and it came out (the envelope detached the part inserted into the USB port) without affecting my ability to access the Internet wireless.  An internet search has a line of golf apparel and a few articles in German... Any ideas?  Thanks, Lara

    If the original owner installed Vista on XP, you need to reformat and do a fresh install of Vista or you will continually have problems multipling. If the original owner is an update from XP to Vista it is OK. However, the problems that you're seen suggest the original owner installed Vista on XP. Verification code (if found on the computer) will not be for Vista but for XP. As long as your operating system is installed, you can retrieve the key with Free Key finder software, do a search and you will find them on the internet. Also if you have the CD and ask for a new key to Microsoft you will get it at a very low price, I don't know no current tax, was $ $10,00. Since you are not the original owner (and the first owner died) both of these options may not be totally legal, unless you can provide proof of purchase or the person deseased was a member of the family.

  • need to change my old hard drive and install vista, a new moved it to the new hard drive

    change from my old hard drive with a new one.  Vista installs in the new hard drive

    How to clean install Vista:

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    See you soon.

    Mick Murphy - Microsoft partner

  • I want to format my hard drive and install vista dvd. What should I do?

    Never done this before any help appreciated.

    I ran format c:\ and attempted then just install windows vista. I had a lot of problems starting etc. Can someone tell me exactly what I need to do? I have format it then create partitions or just intall windows after formatting?

    Help?

    Boot from the Vista CD and follow the prompts to install the operating system. It will be
    guide you with formatting and partitioning (unless you have a desire for a
    specific partitioning strategy, let the software guide to default values your
    choice.
     
    Go here:
    http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall
     
    for orientation
     
    "jeff_polton" wrote in message news: ec0512a7-c1c4-4aa7-b394-be4e19aaf761...
    > Never did this before any help appreciated.
    >
    > Format c:\ ran and attempted then just install windows vista. I have
    > had a lot of problems starting etc. Can someone tell me exactly what I have
    > do? I have format it then create partitions or windows just intall
    > after formatting?
    >
    >
    >
    > Help?
    >
     
     
  • I installed Vista in a Virtualbox VM and the product key does not work, how to fix this? I use the same product key supplied with the computer originally.

    I bought a Dell Precision T3400 of Dell Financial Services and it came with Vista Business installed.  I installed a new hard drive and installed Vista in a Virtualbox VM by using the recovery disk that came with the computer, and the product key does not work for activation.  I get a message that says I need to activate Windows, but he says that the product key is not valid.  How can I fix it?

    Thank you

    If you have reinstalled the OEM of Vista Business copy on the new hard drive, as Bill says you can't also use it in a virtual machine.

    You can only reuse your OEM of Vista professional copy if it is no longer used on the computer. Do you have what operating system installed on the new hard drive? It was an upgrade copy or complete the license?

    If you used a license to upgrade to another edition of Windows to replace your copy of company then Vista Business license is still in use (for upgrade) and you cannot reuse it in your virtual machine.

    However if you replaced Vista business with a copy of the full license of another edition then you are able to use the OEM copy in a virtual machine, but only on the same computer. You must use the product key from COA to the label on the computer. The product key is put in the copy OEM cannot find the SLIC table on the host motherboard. You must use the phone activation from within the virtual machine. Click on start in Vista Business and typing "slui 4. Do not meet the audio guests until it asks you if you want to speak to an agent. Explain that you have completely replaced the OEM copy with a copy of the full license of the new windows and now want to use the OEM copy in a virtual machine on the same computer. Agent will then give you the activation string. Remember that the virtual machine is not transferable to any other computer.

    This information is offered by Darin Smith (MSFT) and the team of Windows licenses, November 18, 2011.

  • Install Vista 32 bit Home Premium L300D - 11K

    Hi all,

    I ve you have a problem my toshiba L300D girlfriends - 11K crashed.
    If I ve formatted the hard drive to install vista Home premium 32-bit.
    but installation hangs on the last step to complete the installation.
    The OS is not recovery, but a new brand of origin
    with a different key. Am, I used to install any third-party-drivers
    installation for installation work? If Yes, how?

    The hard drive seems to be okay, after the third attempt on the vista installation,
    I ve installed Ubuntu which worked very well.

    After Ubuntu worked fine, I tried to install XP which chrashes in a blue screen.

    I need help :), I hope my girlfriend finds his toshiba recovery cd...

    Thanks in advance for your help...
    3rd...

    Hello

    > I tried to install XP which chrashes in a blue screen.

    It crashes because you need sata drivers or install in compatibility mode, (change in Bios)

    > but the installation hangs on the final step to complete installation.

    Do you use the original disc of Windows or Windows Internet assembly?

  • Replacing my hard drive and the need to re - install Windows 7 upgrade. I need to install Vista first?

    I have Windows Vist and I'll upgrade Windows 7 make on my hard drive crashed.

    My question is can I install windows 7 fist or should I install vista first then windows 7.

    My question is can I install windows 7 fist or should I install vista first then windows 7.

    You should be able to properly install Windows 7.

  • Can I install Vista on the new hard disk drive recovery?

    Hello

    I'll have to replace the hard drive of my laptop Satellite A 200 and have only a drive with her recovery. I'll be able to install Vista on a new hard drive for him?

    Thank you

    Post edited by: xaver

    Of course, you will be able to do.

  • Satellite L40: Can I use Toshiba DVD to install Vista on a new HARD drive

    Hi people,

    I'm new to this forum... I don't know that there, can someone advise me.
    I replace my Satellite L40 HDD with a bigger drive, the current is only 80Gig.

    And my question is, can I use my Toshiba recovery Disc to reinstall Vista on the new HARD drive, or is it a hidden partition on the original HARD drive?
    If someone has done this, would appreciate an idiots guide to doing the same thing.

    Cheerzzzzzzzzzzz...

    Dave

    Of course you can do it.
    The DVD of Vista recovery Toshiba help you install Vista, all the drivers Toshiba and tools, and it automatically creates all the partitions.

    So what you have to do is to boot from the recovery DVD and follow the instructions on-screen ;)

    Check it out!

  • Install Vista on a new hard drive without a Setup disk

    I have a compaq cq71. The HARD drive is faulty (as told by checking the hard drive) and must be replaced. I'm going to buy a new HARD drive but don't know how I can install Vista on it. I have no Vista disk, only the recovery on the old damaged hard disk partition. Can I access the recovery partition is if possible I can create a floppy disk to install from here? Alternatively, if I could borrow a disk from someone else? I still have the product key of Vista on the bottom of my machine.

    Any help much appreciated.

    I have a compaq cq71. The HARD drive is faulty (as told by checking the hard drive) and must be replaced. I'm going to buy a new HARD drive but don't know how I can install Vista on it. I have no Vista disk, only the recovery on the old damaged hard disk partition. Can I access the recovery partition is if possible I can create a floppy disk to install from here? Alternatively, if I could borrow a disk from someone else? I still have the product key of Vista on the bottom of my machine.

    Any help much appreciated.

    Hey Paul_Dunbar

     
    You can try to make records of the damaged hard drive recovery
    ask hp how
    or buy a set of vista home recovery disks
    they normally sell them for a nominal cost
    or see if you can borrow a vista microsoft dvd and use your product to install your version of vista it

    Walter, the time zone traveller

  • Install Vista on a Partition on a hard drive recovery nine

    I'm working on HP Pavilion dv6500 laptop from a friend who was in Vista.  She never made the recovery disc and, apparently, the hard drive crashed while I install a new.  (Tries to recover, rescue / reformat all failed.)  Chkdsk, etc. failed too.)  I was able to copy the recovery on an external hard drive partition, but don't know how to install Vista from the BASE.wim (6.5gig) and other files that I recovered.

    Thanks in advance for the entry and if I have left out important info, please let me know.  Thank you.

    Drew

    Thanks for your reply.  HP wants $45.  And you say that it you can buy a HP burner too?  Also order at HP or buy a similar OEM from the same manufacturer?

    Hey DrewFDQ

    I only mentioned that question on the hard drive that some posters have had problems with hp after having replaced with non hp hard drives

    before doing anything on the hard drive to get the recovery disks and see if they work on your new hard drive

    they should

    It's only a couple of posters who brought her here and I thought I would mention it you

    You can replace a hard drive under oem license

    This isn't a problem

    good luck with the resettlement

    Walter, the time zone traveller

  • Problem with drive HARD and Vista install

    Hi all

    A few weeks ago, my Dell Inspiron laptop computer started to freeze. I could boot ok and my desktop wallpaper and icons were all there, but I couldn't run or open anything. I did the Bios tests and my Vista installation disc and told me there was a problem with my hard drive. I wiped it and tried to reinstall vista and that I could see it wasn't working because it took hours and then seems to have stopped again during installation. So I bought a new one and tried to install Vista. everything was going well until it is restarts a second time and I got a black screen with a mouse pointer icon. I had to reinstall it running for about 4 hours, at least an hour of that time which was all that was going on and the hard disk wasn't spinning.

    How long on avg would take to install Vista, if it is running normally?

    is there anything else that might be a problem that would not appear in the repair of Vista or Bios diagnostics?

    Any advice would help a lot.

    If the new hard drive does not work, then the problem is on the motherboard. Your description of symptoms indicates a power supply or motherboard failure. Contact Dell technical support for repair or replacement. MS - MVP - Elephant Boy computers - don't panic!

  • HP Pavilion m7667c, try to install Vista 32 bit. No OS - the charge not assigned drive letter.

    My HP Pavilion PC m7667c console was at the origin of many blue screens. After several diags that does not solve the problem, I replaced the power supply because the block is dead.  Then replaced the motherboard.  The XP PC operating system will not recover because the BONE had already improved Multimedia Pro XP to VISTA. I can get the VISTA OS to run from my CD to upgrade to VISTA, but the operating system is not found, because there is no drive letter assigned to the drive.  I tried a replacement for the HD signal cable but no help.  I can't on a screen so windows help.  At this point, I'm ready to reformat the hard drive then maybe I could partition and assign a drive.  Any suggestions?

    Hello

    How many drives are installed on your PC?  RAID mode running on your PC?

    Boot into the bios and look under the Advanced menu.  What is the setting for the SATA mode?

  • Accidentally, I installed the upgrade to Windows 7 without the first installation of Vista on a new hard drive. How can I remove the upgrade and install Vista?

    I replaced the failed hard drive and then inadvertently loaded upgraded Windows 7 before I reinstalled Vista.  Now I can't understand how to remove the upgrade to Windows 7, so I can install Vista.

    Boot from the Windows Vista DVD
    Click Install now
    Accept the license agreement
    When the option is displayed to select a type of installation, click (Custom advanced)
    Click on drive Options
    Select the disc/s click on Delete
    Click new
    Click on apply
    Click OK
    Click Format, and then click next to proceed with the installation

    or you can try this for Windows 7:

    Skip entering your product key Windows 7 and complete the installation.

    When you reach the desktop, click Start, right-click on computer

    Click on properties

    Scroll down to the Windows Activation

    Click the link x days before activation.

    Click on the link that says: "show me other ways to activate.

    Enter the product key

    Click next

    Select the Activation of the phone

    Click Next when you enter your key page

    Select your country

    Click Next, call the number listed

    Be sure to explain your situation to the Appeals Officer.

    They will give a confirmation ID, enter it

    Click next to complete the activation.

  • New HARD drive installed Vista 32 bit, but need drivers for Satellite Pro A300-1MC

    "Because my recovery disks that I made 3 years ago does not, I just installed Vista 32 bit and then on the Toshiba site, where I have downloaded all the drivers available for my laptop (a Satellite Pro A300-1MC) on a USB key (that I don't have a driver to connect to broadband on my laptop) and when I tried to open on my laptop a message comes up saying" Please insert the last disk of all selfextracting and click OK to continue. "

    So what I do now?
    Thank you

    Sounds like you have enabled autoplay
    Whenever you insert the memory key USB flash it will try and read the contents of the files on it.
    You can disable this by holding SHIFT when you insert the USB key.
    This should disable the AutoPlay option.
    Then you can go to MY computer in order to access the USB key.

    Note: pilots are zipped so you will need to decompress the content first, I installed a 3rd third party tool called WinRAR to unpack the packages unique.

Maybe you are looking for

  • How can I print on legal paper on MX922?

    I can't understand how to print on legal size paper... How this is done? The paper tray has only 8 1/2 x 11.

  • E5-571-5552 Webcam does not

    Well, I'll have is just as the topic says. For some reason any, even after installing the driver for the webcam to my computer E5-571-5552, no flash webcam Viewer and even a Windows 7/8 application for testing the webcam I found can use my webcam. It

  • How to upgrade sony xperia Go u rooted to ICS

    Hello guyz I have sony xperia rooted u ginger bread now I want to update to ics, but it gives an error of the updated software the Please help me in this matter and also let me know that if ics root is available or not? Best regards Fadi

  • Set of AP as a customer

    Hi all, Can I put an AP (series 1200 1300 o) as a customer? My problem is that I need to connect a camera video network to a WLAN but I can't set it up as a bridge. So I request then I associate as a customer of WLAN access point and then connect to

  • OutputStream problems on the device

    Hi all I try to open an OutputStream on a connection HTTP however, the code has never been this line: OutputStream out = con.openOutputStream (); When I test the same via the simulator using the MDS Simulator as my tunnel to the outside, everything w