Replacement for advanced key mini dock 2504?

Similar Questions

• Where can I buy a replacement for Optiplex 9020 Mini-Tower power?

  Where can I buy a replacement for Optiplex 9020 Mini-Tower power?

  I don't see anywhere on the Dell website to buy it.

  jayfie

  The OptiPlex 9020 MT supports / requires Dell exclusive 290w, a standard ATX power supply with connectors main motherboard 20/24 pin for power are not compatible, there is no details compatible power supplies available.

  You will need to contact Dell spare parts @ 1-800-357-3355 sales team, to a replacement unit.

  Bev.

• T500 compatibility with Advanced Mini Dock 2504

  Help please!

  I have a mini advanced docking station 2504 I used with my R61 successfully for a few years.

  I recently bought a T500 and was informed by the sales department that my existing 2504 advanced mini dock would be compatible with the T500.

  When I use the mini dock with the T500 no USB port works not at all?

  All the solutions or do I need a different mini dock.

  they are definitely compatible.

• 2504 advanced Mini Dock

  Hello, I think I have an advanced Mini Dock for use with T60 my family Christmas. I would use it to connect the laptop to our TV for watching movies.

  My TV has these ports:

  Composite

  Component

  S video

  HDMI

  There are port VGA No.. If there was, it would have been great. :/

  It supports resolutions up to 1080i. I would be able to establish a connection? If so, how?

  I don't want to buy what it does not work...

  For a better quality of film get a dvi to hdmi adapter, but you'd need a race a separate line for audio, as the dvi to hdmi adapter are not audio.

• T500 GMA DVI Boot - Advanced Mini Dock: works with a monitor, but not another

  Hello

  I have a type of T500 2242 with GMA X4500MHD graphics in Advanced Mini Dock. BIOS 1.20, startup display set to the DVI connector. Cable DVI - D single-link of the dock-> DVI - D input on external TFT monitor. I get different results according to the attached monitor:

  (1) PX191 19 "1280 x 1024 native plane: splash screen appears on the external monitor.

  (2) "Topaz" Soyo DYLM24D6 24 "native 1920 x 1200 S: external monitor stays off, the splash screen appears on the screen of T500.

  I also have a T42 with Mini DVI - D Dock, -- this one shows the start screen on the 24 "monitor without problem, using the same cable dvi - d single-link I tried with the T500.

  In the case that this can help, EDID info here is for the 24 "monitor, of log file xorg running Linux on the T42:

  (II) RADEON (0): EDID data from the display connector: DVI - D -.
  (II) RADEON (0): manufacturer: XXX model: 76th serial No.: 16843009
  (II) RADEON (0): year: 2007 week: 30
  (II) RADEON (0): EDID Version: 1.3
  (II) RADEON (0): Display Digital Input
  (II) RADEON (0): Max H-Image size [cm]: horiz. : 52 green. : 33
  (II) RADEON (0): Gamma: 2.20
  (II) RADEON (0): doctors of Podiatric Medicine capabilities: standby Suspend Off; Display/color RGB
  (II) RADEON (0): first timer detailed is the preferred mode
  (II) RADEON (0): redX: 0.640 redY: 0.340 greenX: 0,295 greenY: 0.610
  (II) RADEON (0): blueX: 0,145 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
  (II) RADEON (0): VESA graphics Modes supported:
  (II) RADEON (0): 640x480@60Hz
  (II) RADEON (0): 800x600@60Hz
  (II) RADEON (0): 1024x768@60Hz
  (II) RADEON (0): mask of the manufacturer: 0
  (II) RADEON (0): future video Modes supported:
  (II) RADEON (0): #0: hsize: 1280 1024 refreshment vsize: 60 vid: 32897
  (II) RADEON (0): #1: hsize: 1920 vsize 1200 refresh: 60 vid: 209
  (II) RADEON (0): #2: hsize: 1152 vsize 864 refresh: 60 vid: 16497
  (II) RADEON (0): #3: hsize: 1280 720 refreshment vsize: 60 vid: 49281
  (II) RADEON (0): #4: hsize: 1680 1050 refreshment vsize: 60 vid: 179
  (II) RADEON (0): #5: hsize: 1360 vsize 765 refresh: 60 vid: 49291
  (II) RADEON (0): #6: hsize: 1440 vsize 900 refresh: 60 vid: 149
  (II) RADEON (0): #7: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
  (II) RADEON (0): Mode supported additional video:
  (II) RADEON (0): clock: 154.0 MHz Image size: 519 x 324 mm
  (II) RADEON (0): h_active: h_sync 1920: 1968 2000 2080 h_border h_blank_end h_sync_end: 0
  (II) RADEON (0): v_active: 1200 v_sync: 1203 1209 v_blanking v_sync_end: 1235 v_border: 0
  (II) RADEON (0): serial number: U7301D2180063
  (II) RADEON (0): ranges: V min: 56 V max: 61 Hz, H min: max 30 H: 83 kHz, PixClock 154 MHz max
  (II) RADEON (0): name of the monitor: M24EI5
  (II) RADEON (0): EDID (in hexadecimal):
  (II) RADEON (0): 00ffffffffffff0063186e0701010101
  (II) RADEON (0): 1e11010380342178eac905a3574b9c25
  (II) RADEON (0): 1250542108008180d100714081c0b300
  (II) RADEON (0): 8bc09500a940283c80a070b023403020
  (II) RADEON (0): 360007442100001e000000ff00553733
  (II) RADEON (0): 30314432313830303633000000fd0038
  (II) RADEON (0): 3d1e530e000a202020202020000000fc
  (II) RADEON (0): 004d32344549350a20202020202000e0
  (II) RADEON (0): DVI-0 output activated by the configuration file
  in RADEONProbeOutputModes
  (II) RADEON (0): I2C device "DVI_DDC:ddc2" recorded at address 0xA0.
  (WW) EDID favorite synchronization clock 154.00 MHz exceeds claimed max 140 MHz, setting

  Maybe there is something wrong with the Soyo is EDID? Or a bad interaction with the T500 BIOS?

  I would be grateful for clues on how to get the start screen to display on the monitor 24 ".

  Thank you

  Frank

  Good news! I sent my T500 in-service, and Lenovo replaced the motherboard. Now, the startup screen is correctly displayed via the dock to my monitor's DVI port external 24 ". After what Linux / X sees the external monitor and it puts in place and it displays correctly. So: problem solved! Thanks, Lenovo

  Before the swap of the Board of Directors system, I was able to use a cable DVI DisplayPort / talk to the 24 "monitor. This requires an extra cable to plug/unplug, so it's nice to finally have the DVI dock work.

  It seems that this problem only arises with some ThinkPad + external monitor combinations. My original system card worked fine with a 19 "monitor. And another Member pointed out that a single version of a 19 "works fine with its T500 Belinea monitor, even if a previous version does not. (See this thread for more details.)

• Battery ThinkPad Advanced Mini Dock (250410U) display will not extend

  I have a T400 (2764 CTO with a Radeon HD 3400), an Acer 23 "monitor and an advanced Mini Dock (part 250410U, model 2504). I am trying to expand the display of the T400 to the Acer monitor via a VGA cable. When I plug the monitor directly into the laptop, the screen extends. However, when I dock the T400 and connect the monitor to the Mini Dock, I can't get a signal on the screen. Any thoughts? Thank you.

  the same behavior occurs with the Intel GPU mode is?

• T400 and Advanced Mini Dock - does not detect DVI monitor

  I have a T400 with integrated graphics and Windows 7 Professional 64-bit, and I recently bought an Advanced Mini Dock for it.  I have a Dell 1800FP monitor connected to the dock via the DVI output.  When I anchor the T400, the system does not detect the external monitor.  If I go to the resolution of the screen and click on detect, it does not appear.  The weird part is that if I reboot then than in the dock, when the system comes back he * is * detect and use the external monitor.

  Any ideas what's happening?  Other equipment connected by the base (USB, Ethernet cable devices) all work very well.

  I think I solved this problem.  I uninstalled my video driver and installed the latest version from the Lenovo Web site (which was more recent than the one found by Lenovo System Update).  Now my system properly detects the external monitor when I attach to the docking station.

• T400 and Advanced mini dock

  Hi - I have a T400 with integrated graphics card and I'm looking into getting a mini dock advanced to run an external monitor.

  What output resolution has done with success through the advanced mini dock VGA port? -This will help me understand which monitor to get, I read that many had bad signal of the dock when using the VGA port.

  As my T400's only integrated graphics, I won't be able to use the port DVI - is this still true or something changed?

  Your comments would be much appreciated,

  Thank you

  Cosmin

  Hi cosma12,

  Your T400 with integrated graphics can digital video output through integrated DisplayPort or DVI connector on the advanced Mini dock. It is only the switchable T400 graph that cannot use DVI with integrated graphics card, they must use the ATI chip instead.

  Graphics from Intel in the T400 can drive 1920 x 1200 on DVI or DisplayPort - which I think is the highest resolution, supported by the single-link DVI. If you are shopping for monitors, I highly recommend to make one with a digital input: DVI / HDMI / DisplayPort. the video quality is theoretically (and practically) better than when using analog (VGA).

  EDIT: Oops, the T400 (and R400) do NOT have the DisplayPort, while the largest do T500/R500. My bad.

• Replacement for a T500 keys

  Hi, I bought the t500 in late 2009 in Australia and am currently traveling across canada. my 'p' button broke and dissect every time I press it (as here), what are my options to replay it and others, as my laptop is out of warranty

  Thank you

  z

  I don't know, but I think the T60 keys are the same. I do not have a keyboard with a T500 FRU about it, but the keys alike and keyboards are interchangeable. I have replace the keys of all time and once you have done a lot, it can be done quickly. The first time, it took a lot of time. This element of eBay shows the 3 styles of keys. In addition, there are 3 sizes. Your 'P' will be a regular. First, see what is broken. If just the CAP is broken, it is easy to break on. The hinge is difficult to replace unless you have little practice. The cut must be glued. If the metal strips are damaged on the basis of the keyboard, you probably can't fix it...

  http://CGI.eBay.com/IBM-T500-replacement-laptop-keyboard-key-hinges-clips-/290386965903?PT=PCA_Mice _...

• Is that what the AC adapter compatible 40Y7663 for Advanced Minidock 42W4630?

  Hello!

  I bought a 42W4630 Advanced Minidock used (P/N 42W4631, FRU P/N 42W4630, Type 2504) for my Thinkpad T400 (6474 Type) but there is no 90-W adapter with it. Due to the http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T400-advanced-mini-dock-250410U-POWER-ADAPT... I also ordered a 90W AC adapter 40Y7663.

  But I don't know if the ACadapter is compatible with the docking station. I have not found a suitable compatibility list.

  You have an idea if the power adapter is compatible for my docking station? What would happen in the worst case?

  This adapter works because it's the type of adapter supplied with the advanced mini dock.

• New mini dock and the W520

  Look at the specifications for the new cradle of 433835:

  433835U mini dock

  Did someone tried this dock with the W520? I would like to know 2 things before "redevelopment":

  This shows that the W520 will have access to the USB 3.0 port on the dock. T it?

  He also stated:

  "Mini Dock Plus (90W & 170W): 2 x DVI, 1 x VGA, 2 x DP.

  Many systems allow for two of these video ports to use simultaneously. Some systems, including those with NVIDIA Optimus technology, allow up to three video ports on the dock to be used simultaneously. »

  Is that means the W520 can drive three monitors of this docking station?

  Thank you.

  The USB 3.0 replaces on the previous docking station eSata port and is accessible when the W520 is docked in the station's docking port (there is only 1 USB 3.0). The number of monitors that can be operated by the W520 does not change with the new dock. This limitation is in particular use of the chipset NVIDIA on the W520. The W530 can drive 4 monitors.

• Replacement for hp omni 2220-1080qd drive

  Need replacement for hp omni 220 drive. Measures 5.25. can't find. HDD SATA 2 to 7200 RPM / min. thanks!

  @Redsz are you sure that the hard drive is not 3.5 "?  Optical drives are normally 5.25 ".

• Replacement for the Working Group to el Capitan Manager?

  I recently built new servers, intending using open directory.

  The equipment I use are the new mac mini servers, with two 1 TB drives and 16 GB of memory.

  Historically I have used Workgroup Manager for direct starting, deployment of the printer files, user groups and others.

  Is there a replacement for the Working Group Manager who no longer works with el capitan (10.11.3)?

  The replacement is the Manager of service profile. See the built-in help of server for instructions begin. This is beta-quality software, at best.

• replacement for HP pavilion dm4-2180 bezel

  I need to find replacement for my front frame and perhaps thus revolves. Situation similar to the one found here (http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Frame-and-hinge-replacement-HP-...

  Where can I buy it? Thanks in advance

  All you have to do is search for part number HP 636938-001 in line find a seller. Do it yourself if you can find an online seller in your area of the world.

  The following link is a search I did for the part.

  https://www.Google.nl/search?q=636938-001 & OQ = 636938-001 & AQS = chrome... 69i57.364688j0j4 & sourceid = chrome & es_sm = 93 & ie = UTF-8

• Replacement for HPE-210y graphics card

  Hello

  I posted a question earlier about a possible replacement for a card mother 'death', but it turns out that the motherboard works fine.  Good thing I had checked it by another technician, and it turns out that the problem is the dedicated Radeon HD5450 card.  Now I use my computer via the integrated graphics card.

  I searched the Forum but can't find anything specific on the model of my computer.  I don't plan to upgrade the power supply at the present time (300w).  My question is, what is a better alternative for the Radeon HD5450 without upgrading PSU?  In addition, the included graphics card is 512 MB.  Can I use the HD5450 1 GB?  Any brand will be allowed until the GPU is the HD5450?

  Sorry, I'm a little rusty on this thing so I ask your indulgence.

  Thanks in advance.

  I want to just update just in case anyone else needs help.

  Went to BestBuy and scout autour for graphics card.  I saw a VisionTek Radeon HD 5670 with 2 GB of DDR3 memory and check his power.  He said the area "300 Watt or higher recommended power" so I picked up and tried to install it on my machine.  Now my PC runs great!  My performance index Windows have increased from 5.0 to 5.9.  My old WEI is based on the rating that was the lowest graphics.  Now, it is based on the main hard drive. The rated current graphics and graphical games of my system is two 6,7.  So, I guess they will do for most games.

  Hope this helps others who face the same problem I did.  I just hope that the power supply is really enough.