replacement for the shift register chart

Hi, I have a problem with my program. When I want to compare graphic legend with my present graphic it just overwirite with my graph.when this I add new data and then run my program it does not work. I tried to use shift regoster but my program eror. where should I put the register shift in my program? Thank you

The shift register is on the outer loop. There is no need for inside while loops. The shift register should contain a table of two parcels of xy. Replace one of the accrding of two plots to the key using "replace the subset of the table".

You don't need to a simple shift register, you have far too much code.

(Please attach the screws with a suitable name. My Downloads folder already contains dozends of files "x.vi no title")

Tags: NI Software

Similar Questions

  • Increment of the counter without using the shift register

    Is there a way to count = count + 1, with using a node registry or feedback shift?  I have a structure of the event within a while loop (see table).  When the button is touched (kickoff event), a test is carried out.  Based on the test in the case of a string is passed outside of the event to a case statement of success/failure.  The user can run one of these 'events' as many times as he or she wishes.  And in an order any... Test1 (fails)... test 1 (fails)... again... test1 (go) again... test 2 (pass) then test 1 (pass).  When the stop button is reached, I would like to know how many times each pass/fail is produced for each test.  Try to stay away from shift registers, as I have 18 w key so a possible failure for each, so I would need 36 shift registers.

    In my example, the printed final statement would be:

    TEST PASS/fail # x test was performed

    test1 failure 1

    2 in case of failure test1

    Test1 pass 3

    Test2 pass 1

    4 passes test1

    etc.

    Do not see an attachment.

    You can use a shift register to store a table.

    Each button would be mapped to an array index. For each button pushed you the value of the index table, + 1, replace the array element and pass out back for the shift register.

  • problem with the shift register

    for purposes of simplicity, I remove code without problems

    Description:
    1. my state machines, for some reason, a lot of cases.
    2. the order of each case may not change.
    3. the main prupose is to get the difference as on the front panel
    4. prior to entry difference, I first is measured in the case where 2 and TRY using shift register to pass data, ideally at least 5
    5. However, the "previous" value is updated too soon, unlike 'get' is always ZERO.

    for example
    You can see the shift register on the left side has two components, ideally, the 'get' difference should display 2-0 = 2.
    However, given that the second element of the registry team updates too early, my objective cannot reach and meet up with ALWAYS 0

    I think it's my misuse of the shift register for the computer to several cases.

    I pasted this problem for 4 hours... kind of stupid, but could not understand

    in a mulit-case state machine, how to properly passes data to the case (5 in this example) INSTRUCTION to ensure that I get the correct calculation

    GOLD: because I am only looking to the current value and the previous value, are there other ways to get this problem is?

    Thank you

    It is a case where execution highlighting can be helpful. Turn on execution highlighting by clicking the light bulb on the block diagram toolbar. Then, run the VI.  You will see the left side of the team to register the change as the state machine goes through States 3 and 4.  At the time where what happens to 5, all data in the change record is identical.

    One of them might be to use two registers to offset, one for the current value and the other for the previous value.

    Lynn

  • How to program the shift register to play only when a new user is detected user?

    Hello

    I'm currently developing a program of position control in labview. The program is quite simple, in which case the user will enter the distance on which he wants the table in the labview program and labview will send the signal to move a motor that will turn a ball screw to move a table horizontally to the targeted position. The criterion is that the profile of the engine depends on the distance to move, if a biphase (acceleration and deceleration) or three phase (acceleration, steady speed, deceleration) to reach the position of the target.

    The problem occurs when the user wants to enter a new entry second position) for the table, as the input by the user is the position that the table should be, but the necessary input to determine what profile the engine follows depends on the distance that the table moves to the target position. Therefore, I need a function to save the entry by the user temporarily and reminds that when a new user input is detected. Hereby, I would be able to use the difference of the input (input [n + 1] [n] input) and animal feed to determine what profile the engine follows and the entry by the user can be kept in the position he wants to the table to get (to compare with encoder).

    I thought to use for shift registers do, but I am not able to perform the deduction ([n + 1] - [n]) only when it detects a new entry. When I try to use registry to offset, it moves to the target location, and we only reached it will go to the original position. For example, when a user entry 90, this means that the table must be moved to the point 90. The shift register is initialized to 0, it will move to the point 90 (90-0 = 90), but arriving at 90, the shift register sends a signal of 90 (90-90 = 0) and the table back to its original position.

    Is it possible that I can delay the reading of the shift register only when a new entry is detected or there at - it another way for me to achieve what I want?

    I tried searching the forum site and neither discussion but could not find similar problems. Thank you for your help in advance.

    As I understand it, the use of shift registers with a structure of the event (to detect a user event when the user enters a new value) should solve the problem. Do not forget to post your request (or a version of it that isolates the issue) when you arrive at the lab, if we can get a clear visual of the issue you are facing.

  • Change the shift register

    I hope someone can direct me on that. I'm stuck.

    The NTC, I want that it start at zero, enter the nested loop

    and when the case statement is equal to one, add 3000,

    so I have a lag on "undesirable" elements in the 1 d

    table I'm parsing...

    TIA!

    the nested loop shift register is not initialized, it is best to initialize it with a constant 0

    Then, the index entry Array subset function is connected after or before the function incriment? I can't decide...

    in any case, if it is connected before the incremint function then the nested loop iteration 1 will send a 0 at the entrance to the function of the subset of the Array index.

    EWW! , a lot of entries, words of functions in the above paragraph lol , can u get me here?

    now I can just understand the problem what exactly you're talking about. the sequence of events for your code will be like this:

    After the nested loop is complete, the output will be available (1 d the function add array element table) to the structure of the case where you want to add 3000 to the value of the shift register and start the loop nested with initialized again records with value = 3000? Am I wrong?

    If I'm right, you must reset the shift by using a control register, create a local variable to him and place it in the business structure then her manipulate it as shown below:

    Since the default data of "N" type digital command value is 0, then initially the shift registers will be initialized with 0 as the guy above

    Thank you

  • initialize the shift register

    Hello

    How to initialize the shift register (inside the second loop for) so that it starts from 0 whenever the program runs. I tried to attach a constant 0 in left shift register, but which resets the registry whenever it passes through the inner loop.

    Thank you

    If you only want to reset once at the beginning and not for each iteration of the loop for external, you must add another register to lag on the outer for loop and wire lag 0 to that registry.

  • Replacement for the Working Group to el Capitan Manager?

    I recently built new servers, intending using open directory.

    The equipment I use are the new mac mini servers, with two 1 TB drives and 16 GB of memory.

    Historically I have used Workgroup Manager for direct starting, deployment of the printer files, user groups and others.

    Is there a replacement for the Working Group Manager who no longer works with el capitan (10.11.3)?

    The replacement is the Manager of service profile. See the built-in help of server for instructions begin. This is beta-quality software, at best.

  • Adapter replacement for the W510 Iconia

    Where can I get a replacement for the W510 Iconia adapter?

    Try this one, or simply search for the part number NP. ADT11.00D.

    http://store.Acer.com/DRHM/store?action=search&siteid=aceremea&locale=en_GB&ThemeID=26339800&calling...

  • Is a Wireless Optical Mouse 5000 a plug-in replacement for the supplied mouse as part an integral of the Wireless optical Desktop Pro?

    Hello

    Question title:

    Is a Wireless Optical Mouse 5000 a plug-in replacement for the supplied mouse as part an integral of the Wireless optical Desktop Pro?

    I have spoecifically need to know if it has exactly the same features of the IntelliPoint and know if it will work with the transmitter/receiver provided with the Optical Desktop Pro wireless.  I know that the OM 5000 is provided with its own transmitter/receiver, but I don't want to have more than one on my desk.

    Thank you

    Boo

    Hope this information is useful.


    Well it is obviously not useful to say that you do not know!

    Let me know if it worked.

    For someone else who has a problem with the IntelliMouse provided as part of the Wireless Optical Desktop Pro (which is a Wireless Intellimouse Ex plorer 2.0 is told by the way), then they may be interested to know that the Wireless Optical Mouse 5000 works very well with the dongle WODP although the pointer speed necessary to decline slightly with one I had.

    Mike

  • Replacement for the preview handler host has stopped working

    When creating a shortcut which connect to the network share. It can connect to get the file and it will have the following error message:

    Replacement for the preview handler host has stopped working

    Signature of the problem:
    Problem event name: APPCRASH
    Application name: prevhost.exe
    Application version: 6.1.7600.16385
    Application timestamp: 4a5bc5ca
    Fault Module name: hooknt.dll
    Fault Module Version: 1.52.0.0
    Timestamp of Module error: 49a 20833
    Exception code: c0000005
    Exception offset: 0000b 951
    OS version: 6.1.7600.2.0.0.256.48
    Locale ID: 3081
    Additional information 1: 0a9e
    More information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional information 3: 0a9e
    Additional information 4: 0a9e372d3b4ad19135b953a78882e789

    Does anyone know how to avoid it?

    Hi Ivan 2008,

    You can try the network drive mapping & check if it helps.

    Create a shortcut to (map) a network drive

    Hope the helps of information. Please post back and we do know.

    Concerning
    Joel S
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Replacement for the J6400

    We currently have a HP OfficeJet J6400 all-in - One Printer.  It works very well and we are happy with it.  However, our platforms are changing.  We have two iPads, iPhones and iPods.  We need to migrate a printer of Air in order to make best use of our technology.  It's a pain to have to send something to another platform (laptop computer) and print it.

    My question is, which HP with Air Print would be a good replacement for the J6400.  We always want all the features of an all-in-One.

    Thank you

    Jim

    Hello jghannah

    To get a list of AirPrint printers check the right side of the this page.

    Personally, I think that's the Officejet 6500 has more or the Officejet Pro 8600 would be perfect for your upgrade. They share a similar design to that of the 6400 Officejet series. They get all Airprint. For a good comparison between them, see the following link: Officejets with Airprint comparison

  • I am not able to access the ranking for the last registered course. I could access it earlier and can verify the points of my colleagues. Please solve this problem.

    I am not able to access the ranking for the last registered course. I could access it earlier and can verify the points of my colleagues. Please solve this problem.

    Hello

    It seems that the "Gamification" has not been activated because learners can win and compare points with their colleagues based on rules defined by the 'administrator ' in the Gamification.

    You can check with the administrator of your side on the Gamification has been activated or not.

    Kind regards

    Ajit

  • Question about replacement for the P100 broadcast Pro motherboard

    I bought a satellite Pro P100 August 1, 2007 in the United Kingdom.
    Thursday, August 21, went to the turning on and nothing.
    I'm in Malta and took the laptop for the dealer to be informed the next day motherboad was interrupted and must be replaced.
    The laptop is only 3 weeks old, how many others have found the motherboard to go so fast?
    Should I trust this laptop or can I request a replacement?
    If the motherboard is replaced, the operating system must be reinstalled and all of the following software?
    We are in the business of yacht charter and need Windows XP Professional installed to be compatible with our navigation and weather software.
    Any comments welcome.
    Sue Clarke

    If the machine is only 3 weeks and then bring/send it to the next service partner available because you still have a warranty on this machine. And why it s going down so fast - we will be able to answer that. The machine you have is very reliable, so maybe just a "Sunday" - machine if you know what I mean.
    In this case, you have a guarantee, and you should use it and require replacement.

    After the replacement of Don t you need to reinstall anything since only a part is exchanged and nothing significant on your system will be changed.

    Welcome and good luck

  • Why do I only a part of the graph of the wave even if I added the whole wave using the shift register?

    It seems only to read 200 samples and then stop. Shouldn't get a chart to continuous wave after using the shift over a time register loop?

    You must remove VI begin to break out of the loop...
    You can not 'start' a task that is already running...

    You also remove the VI start completely from your code... If you do not use start VI, a measurement task starts automatically when executing the DAQmx reading VI.

    Find the attached VI.

  • Reset the shift register according to value

    Hey there ' All, I've been thrown in Labview to work, so I made a few minis and other programs on my own. The last one I wrote is a system of notification by e-mail, because it's something I plan use a lot. The idea is, I have a random number generator that collects a number every 100ms using a timed loop. When a number is greater than a certain threshold, say 0.5, an email is sent and a flag is hoisted. From there on, I don't want to send any other emails until the number is BELOW a certain level, say, 0.3. With what I wrote, I get emails to send no problem and I can't stop them sending (using a combination of Boolean indicator and a shift register), but I can't understand how to to reset the indicator to allow emails as soon as I "roll" a number under my lower threshold.

    Is there a way I can achieve this? I would be deeply obliged for any help. I have attached the VI I did below, apologies, if it is messy and so on.

    Use a Select statement after the structure of the case.  If the reset condition is True, then thread a real constant through the register shift.  If the reset condition is False, then just wire the existing through the register shift.

Maybe you are looking for

  • Problem of numbers

    Hi, I'm fairly new numbers and began a worksheet.  In column A, I want to date, with each increment by one.  When I try to enter it, I get the triangle of reading with ' the operator '+' expects a number, date or duration, but the cell A4 contains a

  • HDD SMART Check: FAILURE

    I have a HP Envy 15 JL - 073 cL (Win8.1) and I had not used for a few days, and when I turn it on it says hard drive failure and I should back up. Here's what he said:"Processor Check: PAST.HDD SMART Check: FAILUREFAILURE ID: GK5L3D-74E767-RXGJWK-609

  • V Cast Media Manager to load in the browser when connected usb

    When I connect my Droid 3 to my computer via usb, it automatically opens a tab in my browser, V Cast Media Manager from Verizon. How to disable this option? Thanks in advance for your help.

  • Tab control + Vi script problem

    Hello I have a tab control in my sub vi, which in turn has a secondary (let say sp) now I have an another vi which must be loaded in the secondary of the tab. But I get an error message saying invalid reference vi in insert vi. Opening a vi reference

  • The sound is very low and Panel beating is not displayed

    Hello I reinstalled windows on my Hp envy 15-J028tx 8.1, but the volume is very low, more beat audio Panel does not appear. Thanks in advance for the help.