Replacement hard drive after the failure of the HD, restore disc problem
The replacement hard drive should be the same capacity as the original hard drive.
If your goal is to use a SSD, then you will need to migrate the operating system with a working operating system software cloning.
Samsung, Corsair and other manufacturers sell kits of migration with usb connectors SATA that allow the cloning process work perfectly from a hard disk inherited a smaller SSD.
I made a mistake and has paid for major .
This error pouring a drink sweet on my laptop. I know, I know, my keyboard can and protect against damage caused by the spill, but it was a drink together. In any case, I panicked and shut down the system and it has upset and removed the keyboard. And be the impatient person that I am, I made what was probably the ultimate error. I do not give everything save a sufficient amount of time to dry and I tried to boot the system. There is my computer. Or at least I think.
Symptoms: It began at the start, kept a beep, sometime just close and will start.
In any case, I guess that my laptop went kaput. Now to the point of this thread. I had not been a recent backup and can't remember when the last backup was actually made. Assuming that my hard drive is ok, I want to get all my data, so I saw several options:
-Send the system to a data recovery service where I will not pay less than $300, but probably 2 to 3 times what
-buy an equivalent model laptop and put the HARD drive in there
-by an external SATA hard drive enclosure and mount it via USB on another computer
I bought a box external and assembled this evening. I had read about the data access of difficulty with a system non-Lenovo because of encryption of the data. I proved that by linking it to my work (a Dell) laptop and I couldn't access my data directories. If I have access to an another Lenovo Thinkpad, I'll be able to access the data if connected via USB? I had read that I can access the contents of disc hard if it is connected to an another Thinkpad, but I knew not that if it means that I have it connected via SATA connection or if there is work through the USB port.
I'll appreciate any suggestions for accessing my data.
Thanks for the suggestions.
I was able to recover my computer and all data on it.
Just to describe what I have done, here are the details.
Because of my concern about a failure of the motherboard, I bought a used/given new keyboard and an external SATA drive enclosure. I was not able to properly take possession of the car from my other laptop, but I was able to access the data in Mode without failure. With my data, I plugged the hard drive and the new keyboard in and started without problem.
My mac does not detect my hard drive after upgrading to Mac OS Sierra. How to solve this problem?
Please provide more detailed information. You can read write an effective communities of Apple support question. Maybe you could open disk utility and take a screen snap so that we can see what you see.
To post a screenshot
- Press command + shift + 4, that will change the cursor to the line of sight.
- Hold down the mouse button and the collimator allows you to select the part of the screen you want to capture.
- Release the mouse button and the image will be saved on your desktop.
- Click on the camera icon in the toolbar of the message forum Editor.
- Drag the image on the button select a file and click the Insert button.
Hello, I have a Latitude E5520, who was clinging to the srartup with a Startup Repair going on forever.
I have run the diagnostics ePSA and got the error Code 2000 - 0142 with validation 14116, which means that the disk hard is not working properly and should be replaced. This part is covered by my warranty and eligible for automated transmission. So all I have to do is to fill my delivery info.
BUT I do not have a CD of the OS. I see that you provide online all the drivers etc, but I'm worried how I could restore the system with windows 7 OS without a CD or a restore CD. This is the replacement hard drive equipped with restoring the OS option? Or did he just totally blank?
You also need to restore the media since you are still under warranty.
I can't hear any sound when you play a HDMI video uploaded to youtube, plays very well while on youtube but will not play sound from my hard drive after using the lplayer rea download
We will try to download different video using different downloader (other than RealPlayer) and see if the problem still persists.
Toshiba Satellite A135-s7403 HARD drive failed, I have replaced the 80 GB with a WD Scorpio blue 250 GB hitachi. When I try to restore with recovery disk came with the laptop, it passes through two discs 1 and 2 and starts with the start-up of windows for the first time and then runs to the greenish with the spinner blue screen please wait... thne black screens for a second or 2 and then back to spinner, please wait and then it appears the box "installation of windows could not configure windows to run on hardware. This computer' only option is to click OK.
Where to click ok, you get an another msg that says "windows could not complete the installation, install reinstall windows. I tried like 50 times now. Startup Repair indicates the root = failure cause while the installation program is underway. I know that my drive are good, as I adjusted used then about a month when I upgraded the memory because the original memory 512 MB was not enough o well running vista.
To be honest I n don't know what the problem is there but can you get the original installation disc of Microsoft and try to install the OS, just to see if the OS installation will complete successfully?
I had to replace the hard drive in my HP Pavillion DV6911OM. Everything works except Windows update. I tried all the recommended fixes I could find on any site without success. Any ideas anyone?
(1) you get an error message?
(2) what exactly happens when you try to update Windows?
See the methods mentioned below and check if that helps
Problems with installing updates
Updates: frequently asked questions
I had a hard drive fail on my Mac and got a new. The operating system before and after were OS 10.10 (Yosemite). I reinstalled CS3 and entered my serial number. It does not accept as a correct serial number. I sent support of Adobe. They said: Yes, it is the correct serial number. I asked what I could do, they said "Try the Forums." So here I am.
The problem is probably that CS3 is not really supported in Yosemite.
What others have experienced, is that If CS3 is already on the computer, you can continue to function, even if you have updated to Yosemite. But many have had problems installing CS3.
Because CS3 is old and is not officially supported you unfortunately are on your own.
I want to replace the drive hard toshiba with another. Can I use the product recovery cd to install windows vista? What are the special installation procedures apply for those upgrading their hard drive?
Yes, you can replace the hard drive with another. Make sure the hard drive fits into the machine and is a SATA drive. Otherwise it shouldn´t be a problem.
With regard to recovery: Yes, you can install Vista just by using the recovery CD. And NO, there are no special procedures that apply after replacing the hard drive.
That's it, I want to install nice... ;)
grateful for the help on the situation of the Hard disk on the Satellite A60-159 and advice on removal and replacement of the HARD disk.
Well, I put t found any blankets or slots at the bottom of the unit. In this case, I think that he must remove the keyboard and some other covers.
But if the warranty is valid you must contact the ASP for replacement because if you open the Notepad or if you remove the covers you lose the warranty.
Hi, I bought a laptop Lenovo, which came with Windows Vista SP2. Recently, my hard drive crashed and I got a new hard drive. In this case, can I re - install Vista with product key provided on my laptop? If it is possible, how can I get the operating system to install. Appreciate any kind of answers to my question. Thanks in advance.
This is your vista license to reinstall on the same machine
Contact Lenovo and ask them to send you recovery disks vista to reinstall the operating system as it was when you bought it
they do it for a nominal cost of $
or borrow a microsoft dvd vista
Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer
they contain all versions of vista
This is the product key that determines which version of vista is installed
Then go to the lenovo Web site and download the latest drivers vista of your particular computer
I just bought a WD external hard drive. I plugged in the USB port and automatically loaded everthing. I even registered the product. Then I was told that there was an update to the external hard drive. I went ahead and put to day and when my computer restarted to him alone is no longer recognizes WD external hard drive. I had another hard drive that I used where Windows 7 does not recognize it either? Is it some sort of security setting, I need to adjust on Windows 7 64 bit? Please notify.
Check if the hard drive is assigned to a drive letter in disk management.
Click Start, right click on computer
Click on management of
Expand disk management
Select your external hard drive if its posted here
Make a right click paths and change drive letter
Restart your computer, open the computer in the start menu and see if it shows then.
I got an old macbook pro and I stored all my pictures in a drive hard samsung, and it worked very well.
Now I have the new macbook and try to put all the photos in the same hard disk, it does not work. It does not seem to be locked, but why it is happening
In the Finder, please press the combination of keys shift + command + C, or select
▹ go computer
in the menu bar. A window opens showing all mounted volumes. Select the one in question and open the Info window. Which is shown as the Format in the General section?
I had to restore my pc due to losing windows applications.
during the procc SSE, I have been instructed to download all my file and an external source for the recovery thereafter.
Did Noah on external Bank.
Now top PC and works very well.
When you try to retrieve files he asked me why I want to open it with. As I'm not brilliant with computers that don't mean anything to me.
I have a lot of files on my drive external hard thatI can't recover
If you have saved your files using the Recovery Manager you can restore using this site:
If you remove the panels only then the warranty is considered lame bot.
Maybe you are looking for
Hello my laptop has been infected with a Mallware virous doctor and I don't think that it is completely clean. I want to reformat, I just finished my other XP disktop and not, it's the turn of laptop. How can I do since I have not a windows 7 CD into
does anyone know how to change the width of the graph? I want to make smaller or larger lines.
USB key does not start
After a number of updates have been installed, by computer could not restart automatically. When he did re - start, windows mail: could not be started.initialize junk filtering. Your computer may be in memory or the disk is full (0 x 80070002). When
Hello We have ASA 5510 with module installed CSC, capable Module IPS on the same device Can? Thanks in advance Sirjacobs