replacement hard drive and using recovery discs made by myself.

Similar Questions

• After installing the new hard drive and using recovery discs, I get this message could not start because the following file is m issing or damaged system32\drivers\pci.sys

  I just replaced my hard drive with a new because the other HD said imminent failure or something like that! Basically the hard drive was about to fail and I so now the new one installed and I used my recovery disks and all seemed well until the recovery disks have been completed and the computer says to get out them. Then the computer restarted several times and then I get this message:
  Windows cannot start because missing or corrupt the system 32\drivers\pci.sys
  Then he said: "you can try to repair this file by starting windows setup using the original configuration of the CD-ROM.
  Select 'R' in the first screen to start repair.
  one of the many questions I have is that CD-ROMs are talking? It is the recovery disk, they want me to or what? also if you know a CV or another page which includes help on this specific topic would also help! Thank you
  also, I can still use the old drive hard when it is installed on my laptop!
  HP pavilion dv5220us running windows xp
  I had advanced care system that had a top registry Fixer and I got ccleaner as well on the computer
  internet security Norton 2011

  Hello panjok2,

  Sometimes recovery CD are dependent on the architecture of a hard drive.  If it is different from the original disc, then we have problems.

  In this case, the best thing you could do is contact HP and see if this is the case.  If it is not why this happens, they should be able to help you as well because they are the ultimate authority on their recovery process.

  Let us know if you have any questions.

  Best regards

  Matthew_Ha

• Re: Satellite P300 - replacement HARD drive with no recovery discs

  Hi all

  I came to the conclusion that my HARD drive has failed. (PXE-E61error) now seeks to replace.

  Unfortunately I didn't create a recovery CD, and even if I did, my windows (label) key is unreadable.

  He comes, if I replace the HARD drive, to buy a new copy of windows, can I simply start from the CD, install windows on the new HARD disk, and then install the drivers from the Web from Toshiba site or what I need to buy recovery CD?

  Model - PSPCCA-05Y01Y

  I had to spend an hour or so scouring Google and the forum, but to no avail.

  Thanking you in advance for your help.

  Yes, you can do it. Install the version of Windows. All the drivers, tools and utilities that you can download from the Toshiba support page - http://www.mytoshiba.com.au/support/download

  This machine has been delivered with Vista, but I recommend you to install Win7. It works perfectly and very stable on this machine.

• Install windows 7 on a new hard drive by using recovery discs. (Pavilion all-in-One MS215UK)

  Hard drive crashed and HP sent a new with recovery discs that say they will reinstall windows 7. Discs and installed hard drive run for 'restore factory settings' by following the instructions. Takes about an hour and all 4 disks are asking but then becomes at the end and left with white screen saying "no operating system installed."  Left on for a period simply show this message in case something happening in the background, but nothing happens.

  2 extra drives came with set, but they simply refer to the instructions that make no mention of them.

  Please help I am a novice total things withthese

  Hello

  Download and create the bootable CD as described at the link below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=PV-80183-1&cc=us&LC=en&DLC=en

  When you created this CD, insert it into the system that fails to start, restart, and wait until you see a window with a green check mark.  Next, remove the CD and insert your first recovery DVDs.  Reboot the PC and go through the process of installing the operating system again.  If all goes well, it should install properly this time.

  Best wishes

  DP - K

• After replacing hard drive and reinstall Windows, DVD Player cannot play a Blu - ray disc.

  Original title: dvd player

  recently replaced HDD and reintegrated windows 7.  Now my dvd player cannot play a bluray disc.  Any ideas how to solve this problem?

  Duplicate the content of the thread:

  After replacing hard drive and reinstall Windows, DVD Player cannot play a Blu - ray disc

  My hard drive recently broken and we replaced and reinstalled windows7.  Now I'm watching a Bluray DVD and the drive will not read it.  I tried the fix auto and that said they detected a problem but can not fix this.  Any ideas?

  Hello

  You can check these links and try...

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  http://support.Microsoft.com/kb/982116

• href="file://f://myfile.ext would not specify the hard drive and use the same directory as my html file.

  When you use href="file://f://myfile.ext' it will open fine in Firefox 3.6.8. However, I wish NOT hard code hard drive and use the location of the same player if my html file that calls this href link.
  I tried to use href="file:///myfile.ext" and it does not work. I get an error message saying file not found.
  For ie browser I can just specify href = "" / myfile.ext "and it works very well."
  This is a simple html file that refers to several local files and I have everything on a usb key (IE my F drive). The memory stick will be sent to several people and their USB can be another letter.

  I found a solution to my problem. Found I could just specify
  href = "MyFile.ext" and he will see when he's in the same directory as the html code containing the reference. " No need for extra slashes!

• Recently replaced hard drive and ram, when I tried to activate Windows Vista Home Premium says the code has been used, how to fix this?

  I've recently updated my hard drive and ram, and when I tried to activate Windows Vista Home Premium, but got an error that says that he was already in use. I had used the code until I replaced the hardware, how to activate it on my new equipment?

  You can reactivate your Windows Vista installation by doing the following:

  1. click on the Start button and in the box, type search: slui.exe 4

  2. press the Enter key on your keyboard.

  3 select your country.

  4 follow the instructions for the activation of the telephone (toll-free).

• MacBook Pro A1260 replacement HARD drive and reinstall OS

  Hello

  After more than 8 years my Macbook Pro has "finally" stopped working. I discovered the problem is the HARD drive and I wanted to replace it with an SSD, but I don't know if I can? Also to reinstall everything with a new hard drive do I need I know that I need the original DVD with the operating system but my superdrive drive obviously does more centuries ago (bad quality on the right?) and I left the DVD at home (Italy), now I live in the United Kingdom. As I do not think that my Mac has a Mode to retrieve Internet, can I just make a usb bootable with El Capitan (the one I was currently using) or I need a previous operating system? I think the native Mac with Leopard.

  Hope someone can help me.

  Thank you very much

  John

  You can install an SSD in your MBP as long as the form factor SSD 2.5 ".  OWC and Crucial get my nod as the best for Mac compatibility.

  You can get the installation disks in double for your MBP of Service model Apple customer.  Or you can order this Snow Leopard disc:

  http://www.Apple.com/shop/product/MC573Z/A/Mac-OS-x-106-Snow-Leopard

  You can use an external DVD drive or the DVD drive, another Mac connected to yours.

  Ciao.

• How to install a new hard drive and create recovery disks before installing the new drive?

  HP Pavilion Dv5 - 2077 cl/entertainment laptop
  Product #: WQ799UA #ABA
  Windows 7 64 bit

  Hello-

  So for a while now, I get a blue screen randomly, popping up all the time and some time, who is going to "clear my physical memory" or something and then restart after like 30 seconds. I posted in the forums, once it all started and support told me to run tests and finally told me that my hard drive has been the reason for these constant errors. Then I backed up everything, in anticipation of a real accident.

  I'm about to order a new hard drive from Newegg.com, and I would like to know if it is difficult to replace a hard drive in a laptop, or if I should have Geek Squad do it for $50. In addition, I don't think I have the disk for the operating system that came with my computer, how do I order that HP and how much is it?

  And, last but not least, is there a message or a video with instructions on how to install a hard drive and operating system?

  Here is the hard drive Im currently looking, if could let me also know if this would be my laptop and if it's a good idea that would be great:

  Thank you very much.

  Hello

  Yes, that's exactly what you do

  Kind regards

  DP - K

• Can I install a new HARD drive and use an old backup

  Just, I got my new Dell's HARD drive and need to install it in my Dim 9200. Can I use the old hard drive as a backup drive or secondary without deleting anything or reformatting? I have too many things on the old drive and am not crazy about cloning, I prefer to do a clean install of XP and be able to do things more when I feel the need. Is this possible or am I dreaming.

  Has never done this before so I need help. Thank you.

  Dimension 9200 E6600 2.4 GHz 4 GB DDR2 sdram @ 533 MHZ 4x1Go
  250 GB SATA II Samsung spinpoint drive HARD 8 MB cache 7200 RPM
  Win XP Pro 32 bit OEM Dell

  jgarcia

  After installing the new drive hard SATA and windows installation, etc. and when it works to your satisfaction, put the 'old' drive as the secondary, transfer all the files and folders you need in the new C: / volume, using the option "send to."  Providing the old hard drive has no problems, then the format and partition the drive for additional storage.

  Note. Only files and folders can be transferred, all programs and applications must be reinstalled from their records, or downloaded from the site of the publishers.

  Bev.

• This copy of windows is not genuine after the replacement hard drive and recovery system

  I was running factory installed windows 7 Home premium in my laptop hp pavilion dv6 6119tx. Due to hard drive crash I replaced with new HARD drive.  Previously, I did system image backup using easeus todo backup and recovery softeware. After system recovery with the same software, this massage flasehes "this copy of windows is not genuine". I tried to enter the key of product at the back of the laptop but it says invalid.
  I ran diagnstic windows validation tool. him as a result is below.

  Diagnostic report (1.9.0019.0):
  -----------------------------------------
  Given WGA-->
  Validation status: invalid license
  Validation code: 50

  Code of Validation caching: 0xc004c4ab
  Windows product key: *-* - 73CQT - WMF7J-3Q6C9
  Windows product key hash: RmurcM3ZxzWyfEP9WtPUJw = + KaFG
  Windows product ID: 00359-OEM-8992687-00010
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {CA180260-1211-48DB-834C-4805A4594053} (1)
  Admin: Yes
  TestCab: 0x0
  WGA Version: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.111118 - 2330
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  WgaER data-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  WGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Enterprise 2007 - 100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {CA180260-1211-48DB-834C-4805A4594053}1.9.0019.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-3Q6C900359-OEM-8992687-000102S-1-5-21-1883088055-1570218021-1659234768Hewlett-PackardHP Pavilion dv6 Notebook PCHewlett-PackardF.1B20111005000000.000000 + 0002BFD3F07018400FE40090409India Standard Time(GMT+05:30)03DELL QA09 100100Microsoft Office Enterprise 2007126DF6616C522F5867l28mQpHyGN4/v7tLnJzLV + ZnKQ = 89388-707-5082974-6591914

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00178-926-800010-02-16393-7601.0000-0552012
  Installation ID: 010735456091822376148725581093255175938323439855115461
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 3Q6C9
  License status: Notification
  Reason for the notification: 0xC004F200 (non-genuine).
  Remaining Windows rearm count: 1
  Trust time: 10/07/2012 10:49:07

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0xC004C4AB
  Beyond: PASS
  Event timestamp: 10:7:2012 10:46
  WAT Activex: registered
  WAT administration service: registered

  --> HWID data
  Current HWID of Hash: OAAAAAEAAQABAAIAAAAGAAAAAgABAAEA6GGaTIaqGKMieFCbUkhwn9QjphiojRKp0gzcQQzDLnM =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  HP APIC INSYDE
  HPQOEM FACP SLIC-MPC
  HPET HP INSYDE
  START HP INSYDE
  MCFG HP INSYDE
  ASF!            HP INSYDE
  QA09 DELL SLIC
  SSDT HP INSYDE
  ASPT HP INSYDE
  SSDT HP INSYDE
  SSDT HP INSYDE
  SSDT HP INSYDE
  SSDT HP INSYDE
  SSDT HP INSYDE

  Help, please

  Code of Validation caching: 0xc004c4ab

  
  
  Windows has detected the presence of a feat of activation as evidenced by the presence of a table of slic of Dell on a HP computer.
  You need to install windows genuine.

• HP Pavilion 23-g013w: recovery of operating system, replace hard drive and memory now what?

  My hard drive stop working on my HP Pavilion 23-g013w all in one computer. I replaced it with a new 1 TB hard drive. I also installed new memory Crucial upgrade to 16 GB.   All new "hardware" is installed on the computer. When he came she said "Please install operating system on your pc" I ran to the verification of memory and the hard disk check and they both passed.

  I had this all in one at Wal-Mart 2 years ago and it did not come with the recovery disk or they were lost.

  Is there a way to connect with ethernet and download the software, I need?

  Otherwise, what is my next best option... .or not?

  Thank you.

  Thank you very much for the help.  I will continue to "hold" on the line...  Good day.

  Aaron

• Get the HP G62 with empty HARD drive with a recovery disc

  I currently have a HP g62-a46se model.

  Due to some problems that I met, I removed the BONES together with the HP recovery Partition (I think because I don't know what happened) and everything else on the HARD drive so now the drive is completely empty. I made the backup drives but when I run them they say "this recovery media cannot be used on this PC.

  Pls Help. as I have no idea on how to restore the computer as long as the plant...

  If your number was referring to this warranty, then you have three ways to resolve this.

  Buy a HP recovery media or HP partner. This is the inexpensive way.

  The expensive is to buy a supported Microsoft Windows operating system installation disc.

  Install a free Linux distribution. He gets not any cheaper than this. Download and use for free.

• Broken HARD drive and no recovery disk

  Hello, everyone!

  My husband bought a new laptop a few months before and the fact that US aircraft not only any what rescue DVD, we na not create a restore disc, understand us, that we had a lot of time... Except that yesterday one of the dogs was caught in the power cord, and the laptop fell on the floor. Of course it wouldn't restart and the BIOS would not recognize the HARD drive.

  Using an adapter, I was able to connect it to my own laptop and all data and files are displayed. My question is, being able to access my own computer HARD drive, I can create a disc of recovery there and how? Cause when I select this function on my computer, it does not give me the ability to choose which drive I want to create the disk, it assumes I want to do it from my C: drive.

  Thanks in advance.

  > My question is, being able to access my own computer HARD drive, I can create a disc of recovery there and how?
  As far as I know that something like this will not work. For recovery, multimedia creation, you need to use preinstalled Toshiba recovery media creator tool. Saved on the HARD drive recovery image is marked with so-called markers and this tool can find the exact position of the image stored on the HARD drive. Please note that it works under normal circumstances. When your HARD drive is connected as external, this tool can not find it and recovery media is not possible.

  In my opinion, you have a problem with your machine. You know if the HARD drive is not properly recognized that I'm afraid that your laptop has a serious hardware problem and it must be checked by the Toshiba service provider.

  I mean, you can have a recovery media, but it is useless if the HARD drive is not recognized by the system.

• Replacing hard drive and a RAM and more HPE 475uk

  Hello

  I was wondering if you could give me some advice at all?

  My hard drive of 4 years HPE-475uk PC deskt starts to become noisy and slow and had errors. Rebooting/resetting the computer and reinstall Windows 7 did not help so I think it's time to present a new. While I'm here, I would like to replace my RAM too.

  My computer is a HPE-475uk, Intel i5 Dual Core, Windows 7 64 bit and I have 8 GB or Ram (2x2x2x2). Here is a link to the complete specification / card mother etc. If this can help, or I do not have any sense! http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c02622053&DocLang=en&docLocale=en_US&...

  Prevented, I'm not that technical and I was out of the loop for so long that I'm not sure what is now compatible with my PC and I was wondering if someone could point me in the right direction to correct products!

  I would like to replace my current drive HARD SATA 2 1 TB 7200 RPM with the same size (or larger and faster if it is compatible?) but with a large cache. (I am a musician and use a lot of sampled instruments). Can I put a disc of 2 TB SATA 3 right? If I do anything other that install it because it's a more recent material on an old motherboard? (IONA-GL8E)

  Also I would get out of my yard MB of RAM PC3-10600 DDR3-1333 (240 pin) and replace it with 16 GB max that my motherboard (4x4x4x4), but not sure what memory is good for my computer. Whenever I go to buy, anyone says it is not compatible or too fast! I'm looking Technology Kingston 4 GB KVR13N9S8/4 1333 MHz DDR3 Non - ECC DIMM Memory Module. Can you tell me if it's ok or point me to one that will not work if?

  Thanks a lot for your help! It's much appreciated!

  Kat

  Yes. These modules that you linked to on Amazon should work.

  With a single hard drive, you can reduce the C: \ partition and create a separate partition for your work.