Replacement memory

Similar Questions

• UCS hot add/replace memory/CPU

  Hello. I know on cisco UCS C460 we can expand the amount of memory using memory riser cards. Memory riser cards are hot-swappable. This means that when I run Win2008R2 Datacenter Server c460 I can hot add and replace the memory riser card memory?

  Can I hot replace memory on the motherboard slots?

  What UCS server models are supported CPU hot add/replace?

  Dmitry,

  Yes the risers of memory are hot-swappable, so assuming that the bare metal OS can support memory added to hot it will work.

  There is no DIMM slots on the motherboard directly on the C460.  Memory riser is only motherboard for memory interfaces.

  There is no such a thing to my knowledge as an addition to hot CPU on all Cisco platforms.

  See the Installation Guide HW for more information:

  http://www.Cisco.com/en/us/docs/unified_computing/UCS/c/HW/C460/install/replace.html#wp1160169

  Kind regards

  Robert

• HP 15-G020DX: replace memory 15-G020dx

  I am wanting to upgrade the memory on my laptop, but cannot yet understand how down once I get out all the screws.

  A. what I'm missing?

  Can b. I upgrade the memory?

  Hello:

  This won't be an easy thing to DIY. Direction as a whole must be purchased for the upgrade. It will void the warranty, then I suggest that contact you HP service center for her.

  Through the 69 page in the Manual.

  4 GB of RAM can be replaced with 8 GB stick of exactly the SAME configuration as shown in the manual.

  Concerning

  Visruth

• Pavilion DV 6700: replace memory laptop

  I want to improve 2 GB of memory (2 X 1 GB) memory 4 GB (2 X 2 GB) on Pavillion DV6700.  I see how to do it, but my question is: when you replace the memory by putting in two new boards that erases all the files or passwords or any information from my computer?  If I put in 2 new boards of 2 GB, I'll be able to start with all my computer systems and files works as before the upgrade?

  @fanhp

  Upgrading the memory has no effect on any of your files.

  REO

• How can I check replacement memory is correct for the following laptop:

  I'm considering a purchase in the next 2 months of this device: HP ProBook 4530 s (XU016UT #ABA).  Is there a list indicating the memory that is compatible with this unit of the brand and model?  I'm looking at this particular unit: Corsair Memory - 8 GB (2 x 4 GB) DDR3 SODIMM Memory (CMSO8GX3M2A1333C9 The 4530 comes with Win 7 Pro 32 bit OS, so it will use more than 4 GB of memory.)  Thanks for any help you can offer.  Jim.

  Hi, Jim:

  This memory should work, but only 4 GB will be usable with a 32-bit operating system. You need a 64-bit operating system to take advantage of more than 4 GB of memory.

  When you receive your laptop, call HP at this number below and see if they will send you a W7 Pro 64 bit game of fast laptop restore disks and if you decide to install 8 GB of memory, you can install the 64-bit operating system.  You will need the model number and serial number handy.

  1-800-334-5144

  You can use almost no portable PC3-1333 ECC memory.

  This memory will work:

  http://www.Newegg.com/product/ProductList.aspx?submit=Ene&N=100007609%20600000414&IsNodeId=1&name=DDR3%201333%20%28PC3%2010600%29

  Paul

• Pavilion 7g replace memory

  You want to upgrade RAM on Pavilion G7.  Unable to get coverage of the.  Water-cooling appears to be locked in place and turns, unravel, but never released.  Am I missing something?

  Nevermind - I figured it. The cover slip (away from the battery), it is not pop up and the screw remains in place.

• 3 beeps, 5 seconds silence, 3 beeps, etc change the memory did not help...

  Mac Mini end of 2012 running El Capitan

  With 3 beeps, 5 seconds silence, 3 beeps, etc, it's "no good bank."  I was using crucial memory, works fine until about a week ago when he is awakened from his sleep gave the order to 3 beeps.  Changed to original memory of apple, same, got crucial replacement memory, same 3 beeps...  I doubt that all the 3 series were / are bad.  What else could be?  Any hardware problem would give sequence 3 beeps?

  Probably the logic board is having some problems caused by the bad memory or another problem. I would certainly get extract in an Apple Store or service provider.

• NB100 black screen after memory upgrade

  My NB100 works well with the Samsung 1 GB of memory which was included when I bought it, but when I replaced the screen with a new Kingston 2 GB 667 MHz (2 G/VR667D2S5) doesn't show anything when I turn on the laptop back, even if the LED indicators seem normal and fans inside its normal.

  I tried a replacement memory (same type of Kingston) - still no luck. I put the old Samsung back and the laptop starts fine.

  Any ideas?

  Hey Buddy,

  What NB100 you have exactly? What is the number of exact part of it?

  AFAIK NB100 supports only 2 GB of RAM. This means that you can install the module of 1 GB in each slot, but not a 2 GB RAM module will not work.

  So, if you want only 2 GB of RAM, you will need to purchase an additional 1 GB module because the NB has two memory slots.

• Update memory

  Hello

  I have a HP Pavilion g6 Notebook PC 2221 EV X64bit, Intel (r) Core i3 - 3110 M CPU @ 2.40 GHz, with an A-DATA 4 GB DDR3 1600 Mhz, module in the connector 1. I want to move from a factory setting of 4 GB RAM to 8 GB RAM memory.

  I did some research on the web for example (analysis tool essential) but I'am still uncertain on which module of memory should I buy like noone Specifies whether it is a

  DIMM or SODIMM?

  Voltage?

  Double or Single Channel module?

  I would also like to know what replacement memory (brand names that are compatible HP) choice I have? Can anyone help?

  Hi Fotzou,
  
  
  
  I don't have a lot of the information you are looking for, what I found in the Maintenance and Service Guide is a reference to the reference numbers that is known to work in your notebook memory HP. You can find this information on page 47. I have also included the document 'upgrade memory (RAM)'. This will guide you through the steps of verification of the amount of memory can be installed, the maximum memory supported and how to install it.
  
  
  
  An option that you always check the HP Shopping web page, to see if there is memory available for your laptop modules there.
  
  
  
  Thank you.

• HP Pavilion dm4-1024tx Enterta: upgrade to 8 GB of memory and is blue screen problem

  Product: HP Pavilion dm4-1024tx Entertainment Notebook PC
  Product number: XC651PA
   
  I have corsair Vengeance ram 8 GB (CMSX8GX3M1A1600C10) that as a result of the configurations as mentioned below:
   
  SPD 9-9-9-24 latency
  SPD speed 1333 Mhz
  SPD voltage 1.5V
  PC3-12800 (1600 MHz) memo speed
  Tested latency 10-10-10-27
  Tested 1600 Mhz speed
  Tested voltage 1.5V
   
  It passes the test of memory BIOS.
   
  BIOS VERSION: Hewlett-Packard F.27, 21/12/2011
   
   
  But when I boot windows 7, it shows the windows symbol and then it shows the blue screen with the error
   
  STOP: 0X0000007E
   
  If I replace memory corsair with the memory that has been delivered with the laptop the system only works very well.
   
  Corsair memory is not compatible with the system?
   
  I have a dual boot and installed ubuntu on this subject. Ubuntu loads perfectly fine, but after a while the system restarts automatically (IE open application).
   
  I tried memorytest86 to test the memory, but the application continue to crash and reboot and does not provide any results.
   
  Help, please.

  The RAM is not compatible. The system allows a maximum total memory of 8 GB and uses DDR3-1333 which downclocks at 1066 speed. You cannot use a single module of 8 GB. 4 gigs is the large single module supports the system. I suspect the memory that you have will work fine if you had modules of 2 x 4 GB instead of a single module of 8 GB. That's why memtest is not finished. The controller memory motherboard is not able to take up 8 GB of RAM by a single channel.

• HP laptop - 15-r131nx: memory upgrade

  Hello

  My laptop

  HP laptop - 15-r131nx (ENERGY STAR)

  a 4 GB of Ram

  I searched and google on the Ram upgrade and found that only one video on youtube who see the how to say while HP offer only the PDF manual on how to upgrade your RAM even his average dissamble the whole of your laptop just to get back the memory, you should

  Anyway my qustions is:

  (1) how can I improve my ram?

  (2) what is the maximum capacity of ram I could achieve is (8 GB) or (16 GB)?

  (3) the most important qustion is how much my laptop has locations of memory is 1 or 2?

  as I read the Intel version has 2 slots while the AMD version has 1 location is true?

  I have version intel

  and can you give my the specific manual for my product computer notebook

  They do not write a specific manual for each single model. The manuals cover a variety of styles. Don't know what you are looking for or what information is still missing for you. You have an i5 processor, so you have 2 memory slots. Maximum memory is 16 gigs... 2 x 8 gig memory DDR3L-1600.

  From the Manual:

  housing for module customer accessible/upgradable memory 1 or 2 (depending on model) 2 slots: DDR3L - 1600 MHz Dual Channel Support (Core processors)

  Supports up to 16 GB of RAM in the following configurations: 16384 MB total system memory ● (8192 × 2)

  Replacement memory is on p. 76. You need to remove the motherboard. It is not easy and requires a very detailed membership of the procedure described in the manual. It will compromise security.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• memory supported + speed of memory in DV6-1330ej model VL060EA

  Hello

  I have this laptop for allredy of 4.5 years and its only 2 GB of ram I would like to extend his memory from what I tried to find in the web, support up to 8 GB of ram, but I don't know how fast and what type of memory I need...

  HP DV6-1330ej model VL060EA

  and all that I could find is: G.Skill 1x4Go DDR3 1066 Mhz SODIMM

  and I wonder if its any good

  Ty for the help

  Alex

  Hi @Alexkv1984

  Thank you for your request, I will do my best to be of assistance.

  Here is a link to HP Pavilion dv6 Entertainment PC Maintenance and Service of Guide. Please note Chapter 4 on page 11 for a list of replacement memory modules and how to replace them.   You will notice your takes system PC2-6400, 800 MHz, DDR2.  Two 4 GB cards would give you your maximum memory of 8 GB.

  Here is a link to,HP Parts Store order web ordering tool for your convenience. You can most likely purchase the ram to a computer supply store if you prefer.

  I hope this helps.

• Compac Presario CQ57-229WM: failure of Compac Presario CQ57-229WM Memory Module

  Compac Presario CQ57-229WM w / Windows 7

  I get the following text "Windows has recovered from an unexpected shutdown. A problem caused Windows to stop working correctly. Windows will notify you if a solution is available. »

  Followed by a crash dump

  Verification of results in the readers:

  Drive hard test Passed

  HDD SMART Passed

  Module memory failed

  1 732 608 bytes of memory tested system OK

  Fault memory test

  Any help would be greatly appreciated.

  One or maybe two sticks of memory failed. If it's not very common to have two fail - it wouldn't be a bad idea to replace both if you can afford it. You could also spend 4 GB of the 2 GB, you have now.

  Crucial is always a reliable source of memory and they have single sticks or a set. Click on 'Show memory more compatible upgrades' under the memory listed to see the simple sticks and sets:

  http://www.crucial.com/USA/en/compatible-upgrade-for/HP-Compaq/Presario-cq57-229wm

  You can remove a memory stick at a time and run the test to determine if one or both is a failure. Your interview Guide & shows how remove and replace memory:

  http://support.HP.com/us-en/product/Compaq-Presario-CQ57-200-notebook-PC-series/5091489/model/5111956/manuals?lang=en&cc=us

• New memory: spontaneous reboots & Blue Screen of Death

  I have an office of a1610n with 1 GB of hard drive Hitachi DeskStar memory, XP SP3.

  I chose to be upgraded to 4Gig memory, went to Fry and based on the number of model the whiteshirt gave me 4 sticks, with these specifications:

  FP6 DDR2

  DDR2 PC6400 DUAL LLK

  SPEEED 800 MHz

  CASE 4-4-4-12

  After the replacement, the computer will work only for a few minutes before restarting. Or bluescreening. I tried to take two of the DIMM, moving them to different locations, try 2 DIMM at a time in different locations, etc.. No joy.

  And, it seems not much faster than elsewhere.

  Replacement memory with DIMMs original restored the computer to normal operation.

  So I wonder if Fry gave me a non-compliant memory. I hope so.

  Thanks in advance for any response.

  Don.

  Don.
  Pavilion Media Center a1610n
  128 MB nVidia onboard graphics card
  Windows XP SP3
  1 GB of memory (about to extend to 4 GB)
  Hitachi 250 GB HD sister
  • Four connectors DIMM DDR2 240-pin
  • Supports PC-4200 (533 MHz) and PC2-5300 (667 MHz) DDR2 DIMM
  • memory non - ECC, unbuffered
  • HP/Compaq approved maximum memory is 4 GB *.

  The above is the type of memory supported by the motherboard you.

• POWEREDGE 2800 memory/battery problem

  Hello

  The server DELL POWEREDGE 2800 our company with windows sbs 2003 suddeenly server has restarted yesterday and stuck in the POST gives the error"

  Memory/battery problems were detected.

  The adapter has recovered, but cached data have been lost.

  Press a key to continue. "

  I have three times restarted the server by pressing a button to continue. All three time loading of bones preserved for a long time and restarted the same screen of the error.

  ATLAST I turned off the server and checked for any loose contacts according to the suggestion of dell. I removed the disk 0, 2 HHD, HDD3 in channel one o and replugged in and started the server. Same system has occurred. 1 HARD disc is already failed in RAID 5 and the place so that the disc is empty, I suspected may be another disk HARD in the same row is a failure and so I removed HDD 0 and rebooted the server. the same symptom (2003 loaded and stuck). turned off the server ' reconnected HDD0 and removed HDD2 and restarted the server, but the same symptom.

  Reconnected the HDD 2 and disconnected HDD3 after restarting the server, it gives error loading operating system.

  There are disk HARD 4 and 5 two more hard drive HARD drive in another channel 1

  How to recover from this problem and our secure server data?

  Please help me with this because I'm helpless and the server must be brought im production tomorrow

  Thank you & best regards

  Margot

  If your LCD is blue and you get the error of memory/battery on each startup, then you need to replace memory RAID (99% chance that it is rarely a defective battery or the riser).  The operating system will not usually start in this scenario.

  If your LCD is amber and a message about the scrolling ROMB battery voltage, you should replace the RAID battery (sometimes it's because of riser).  The operating system will usually start and work very well in this scenario.

  First of all, stop playing with readers and replace the memory RAID (and battery and lift to be 100% sure).  Once it is replaced, due to all mixture player you have done, you might have a few steps very careful to recover your data and make your table online.  When you're ready to do this (again, it is useless before repairing the message memory/battery), call Dell technical support - it's always free on servers, regardless of the status of the guarantee.