Replacement of colors with symbols

Hello

I have converted a photomosaic image to create a pixelated look

on a picture of 725 x 725 pixels. The mosaic is 100 x 100 grid.

I would now replace each color in the tile with a symbol

It is possible, if so how?

Thanks in advance

Welcome to the forum.

alby2014 wrote:

-J' converted a photomosaic image to create a pixelated look

-Mosaic is 100 x 100 grid

-replace each color in the tile with a symbol

Have you used "object > create object mosaic" to achieve this goal, or if you are speaking of something else?

Tags: Illustrator

Similar Questions

  • How can I replace a color with a pattern fill?

    Hi everyone, thanks for all the answers in advance!

    I've created quite a detailed design that works with 4 pixels per cm and 16 colors, canvas size 120x170cm. I'm wanting to replace all one color with a pattern, is there a way to do this?

    Can I replace a color with another flat color using the settings etc. but I want to meet all of an area of color with a pattern instead. The only way I can think to do would be to use the magic wand tool to select each pixel of the same color, then create a new layer and overlay with a filling of the desired design, however the design is so detailed, it would take me a terrible long to select each color!

    Can someone suggest a faster way of efficiant more to do?

    Thank you!

    Select--> color range

    Mylenium

  • How to replace one color with each other?

    Hello

    I use Photoshop Version: 2015.1.1 to change a single image.  (I use the color Mode indexed with a color table custom that I created with only 8 basic colors.)

    My bitmap has a black background and a border of a pixel wide red around its perimeter.  I want to erase that border (replacing the Red pixels with black).  I can do this with the Eraser tool, but I have to drag them all around.

    I was wondering if there is a faster way to do it.  If there is a tool that would allow me to click on the red border, they are automatically the Red pixels that form this border change to black, it would be great.  If someone can tell me that if such a tool exists, I would really appreciate it.

    I should mention that the inner part of my bitmap has red pixels I don't want to change, so I don't have to replace all the Red pixels across in your drawing.  I just replace the consecutive red pixels that form the border.

    Thanks in advance,
    Paul

    Set your foreground to black color. Select >, then edit > Stroke, 1 pixel inside, then uncheck the box.

  • Replace a color with another specific RGB value

    I'm pulling out my hair.

    I have a piece of clip art that is red, but has a reflective effect of pretty glass on it. I want to target the entire image and replace it with a very particular purple color, namely HTML code #8874fe.

    I can't just work on how do it. Could someone guide me through it please?

    Thank you.

    This is my friend, try these two videos. The two go through a simple step by step, and although there are different color replacement techniques, these two deal specifically with the color replacement tool

    Photoshop color replacement tool. Tutorial Photoshop CC - YouTube

    How to use the color replacement tool in Photoshop - YouTube

  • Replace a color on all or several layers

    I have 240 layers which are the images of the animation.  The animation is a model of CAD rendering on a white background. I want to change the background color of a specific (or transparent) RGB color to match the bg site.

    Is it possible that I can replace one color with each other on multiple layers (or all) in a single operation?  I use Photoshop CC.

    I can't make a new rendering of the CAD - too expensive.  I also can't change the bg site - it's the company style guide.

    Thanks in advance.

    Salvation for anyone who is interested, I found a solution.

    1. generate gif animated in photoshop (see http://www.briandalessandro.com/blog/create-an-animated-gif-in-photoshop-cs5/ for help)
    2. Open the gif in Fireworks CS6 (like I have a CC license that I download - never used before)
    3. Save under...
    4. Choose the animated gif type and select Options in the dialog box.  An image preview windows opens.
    5. under options tab, in the color palette, there is transparency dropper selection buttons.  Click on "Select transparent color" dropper (on the left of the three).
    6. On the image preview on the right, select the background and it will turn transparent checkerbox.
    7. OK, save.  Fact.

    It does not replace the color that I decided to do, but be transparent does the job for me.

    See you soon.

  • HP Envy 5530: HP Envy 5530 told to replace the color cartridge, even after replacing with a new one.

    HP Envy 5530 said to replace the color cartridge, even after replacing with a new one.  Printer is 1 year old and I replaced the cartridges several times over the past year.  I am enrolled in the program of HP ink.  I can run the printer mode single cartridge using a black ink only and it works with my pc XP, Ipad, Chrome pc and mobile phone.  My pc win 8.1 will not print anything other than a test page.  Printer on the pc file lists always attention required when you try to print from the pc win 8.1.  I believe that the problem may be related to surface of cartridge for printing inside the HP envy heads 5530.  This part is available for purchase, and if so, where?

    I found a work around.  On the pc win 8.1, it seems that the print request must see a reset of the HP envy 5530 to print mode single cartridge.  I just start the pc and then reset the printer by lifting the hatch for the print heads.  That's all.  Once this is done, the 'attention required' message goes to the loan and it is able to print.  It will open a window, which suggests you add the color cartridge, but it will disappear when printing.  Simply open the door once and you can print until you turn off the pc.

  • Black ink (symbol of bow tie) lack of replacement of color package

    I recently ordered a replacement of color which included CMYK (364 for C309a printer code). However the K (black) was not the version of the bowtie symbol. It was the symbol of the black Pentagon for printing of daily.

    Is it possible that this can be used for photo printing or am I resigned to try to find a single cartridge black knot Butterfly? Currently, I am unable to find the cartridge of the Pentagon symbol (code: 2011/07) online.

    Thanks in advance.

    Paul

    The bow tie, one is the Photo black cartridge, you can buy online at SureSupply

    http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead/cartridge-compatibility-how-to-find-out-which-cartridges-are/TD-p/740561

    More details on the Photo black cartridges in the link below...

    http://support.HP.com/us-en/document/c01839024

  • A jpg still print with white lines spaced, but I replaced the color cart.

    A jpg still print with white lines spaced, but I replaced the color cart. Please notify. Thanks in advance.

    Hello

    That's what I feared. This kind of banding appears in images when using normal paper for use with low quality settings. You can try to increase the quality of the prints or try using photo paper.

    A good document to make booklets with photos is the HP brochure and flyer. (C6818A)

  • I need to replace a color on my image with a specific part of the image color.  How do I?

    I spent over 2 hours trying to figure out how to replace a color on a part of my image with a specific color indicated on another part of the image.  So far, I was able to go to "Replace color" on my version of Adobe Photoshop, but it seems that I can only change the hue and brightness of the color that it is currently.  I need to use a specific color, so this didn't help me.  Does anyone know how to complete the task that I refer to?

    In addition, please keep in mind that I use Adobe Photoshop 6.0, not a fancy cs version or whatever it is.  So it's fairly old school...

    Any help/comments are greatly appreciated!  Thank you.

    Hello

    In fact, you can choose a specific color using the replace color function!

    Go to Image > adjustments >, replace color

    Select the color you want to replace. Then, click on the 'Result' box in the section of replacement (see below)

    A color picker dialog box opens, where you can use the eyedropper tool to select a specific color in your image, or you can enter the specific RGB/CMYK values.

    Please post again if you have any other questions - I use CS6, but as far as I know, this process works the same for PS 6.0.

    Good luck!

  • HP 3050 printer prints not clearly even after replacing the color and black cartridges...

    I have a problem on a HP 3050 printer all-in-one that is just a year old.  The printer is not used for several months and it was working properly before.  I tried to print a page and had missing horizontal print, I tried to clean the print heads and it did not help.  I replaced the cartridges with new ones and noticed that the ink levels showed that had the old cartridges.  Black was half full and the color was full.  It wasn't new purchased in-store cartridges refills.

    I tried to force an alignment page on the maintenance of the printer screen and this failed repeatedly, undetected alignment page.  I did some research and even tried to clean links them / connectors than cartridges fits.  Looks like that leaving the cartridges for several months in the printer was bad and that I'll need to ge a new printer.

    Thanks for the tips,

    plarr

    document here can help to solve the problems of print quality in your Deskjet 3050 has. I also suggest to clean the cartridge and printer electrical contacts as described in this document (for another series of cartridges, but same principle).

  • Replace the color of Rusty object

    Hello

    I have a rusty object I need green replaced with red, but without interfering or color.

    I found the color replace did a pretty bad job, creating a solid color layer and masking work, but he "painted" on the rust, the Replace Color tool is pretty good, but there is no way to adjust the color. I used a dark red-brown and it seems enough rose (see attachment).

    It would be ideal if I could exit the replacement as an adjustment layer brush, not sure it's possible...?

    Rusty.jpg

    Replace-colour.jpg

    Colouor-overlay.jpg

    If anyone has any tips or advice it would be greatly appreciated.

    See you soon.

    Create green color with the Magic Wand selection, click Hue/Saturation in the Panel settings then check the colorize and play with hue, Saturation, and brightness sliders. You can change the mask later using the Brush tool, for example. In this way, you will have non-destructive adjustment layer and mask layer you can change at any time. You can use and other adjustments like curves but according to me, is easier with the Hue/Saturation, if you want to visually work without matching the exact values.

    On the screenshot below, I've done exactly in front of the thing by mistake, but the principle remains the same.

  • Why the Replace Color tool does not replace my color?

    I have the following situation:

    White in the image.

    Choose the color replacement tool

    Choose a red color

    Apply the white color tool

    Nothing happens

    Change color to light mode

    Receive a brownish band where the tool is applied

    Change the color mode and apply the tool to brownish band

    Receive a red strip, where was formerly the brownish one.

    See the three States of the image in the attachment.

    Why was not applied in the first and replaced color replacement tool white with red?

    stripes.jpg

    White is not one any colour change, because there is nothing to change.  Try to place a filled layer of red, above a layer filled with white and setting the blending mode of the layer of the red color to the color.  It just goes to white.  Now fill in the color of white background with grey wire (any value will do.  The darker the gray, the more saturated the Red will become.  Less of the tracks until you get 50% gray.  From there in complete darkness, it becomes darker. When you reach the full black, once more, there is nothing for the color work on, and it appears black.

    It is a useful exercise of understanding how to mix work modes.

  • Replace Document colors Bug

    All known bugs to replace the colors in the document?  I am running windows 7 with new Acrobat Reader DC.

    For example, if by default my document is black text with a white background and I change the white text and black background (Edition > Preferences > accessibility), I now have with black background and white text pages and other pages unreadable with black text on a black background.  Again, I have change the green on a black background and yet my entire document has a black background, but now some pages contain the green text, others have white text, and others have black text and cannot be read.

    What is the fix for this problem of accessibility?

    This does not solve the problem.

    The problem seems to be that Acrobat Reader only changes the color of the text for a single page in the document.  I found a work around by going to Edit > Preferences > accessibility.  There's a box of "change the color of the art online as well as text.  If this box is checked, then uncheck the box; If it is not checked, then check that it and the color of the text for all of the document should now be correctly formatted.  This procedure seems to ignore any bugs in the code it keeps updating the color of the text on each page, but these steps should be done whenever you need to change the color of a word processor based PDF.

  • replace black color

    8669c8ccea987661a1dd9252eb84240e_1.jpgI need to replace black in the present with other options of color for my friend who is the designer and wants to see how other color combinations work and I tried replacing bothe color and hue saturation methods but they allows firstly the bizarre neony results and works at all. Any ideas? Thank you! :))

    Hi Carmel,

    Its black never easy evolution how be it in Photoshop. A girl with black hair generally turn a blonde is closing impossible to do convincingly. As soon as you lift the luminance of the lack of detail information appears immediately. However, it may be false. Do not expect to be able easily to bright yellow or orange intense and keep it looking real.

    If this level of quality is high enough to you how you do it. I'm afraid that this is not a topic to beginners but if all goes well

    You can experiment

    First take the original image and reproduce them. We are working on the layer duplicate or higher.

    (1) with the tool lasso around all black areas draw. Here is a very rough selection

    (2) in a store the selection in quick mask mode.

    (3) go to the color range. What we were doing before was only to give color range, a good starting point, do not make a good choice.

    In the drop-down list select shadows and if you set the blur, but its not required. This will give a reasonable

    selection of black areas. Create a layer mask so only the black areas are visible. You will always have the original image in the stack of layers provides the background.

    (4) now how the color is changed. Create a gradient above the hidden layer map. Set the layer mode to color. You may need to pick up the cards degraded, but essentially, you have a simple gradient and color at one end of the gradient is mapped on the darks of a picture

    and the color at the other end is mapped to the light of an image. Gross over simplification, but it is the principal. So, if you start with a simple

    black-white gradient and change the black to tell red he maps the color red to dark areas of the image. The white end of the gradient can be left in the

    White as the image is largely black. You need to cut the card of the hidden layer gradient - that is important. You will find black in the object will be replaced by the red, but the bottom layer is not affected.

    (5) now, create a hue saturation adjustment layer and clip that to the gradient map. You will find you can now move the hue and change saturation

    and even the luminance.

    (6) Finally, use a curves layer to fine-tune the contrast.

    I've only used a red on white gradient here, but you could experiment with several layers of the gradient map and this will probably give you a better range of colors

    Hope that helps

    Terri

  • How to replace the color of a schema (cs5)

    Work on a raster of the logo image. I want to change to more moderate yellow bright yellow lines.

    new logo.jpg

    I tried to Image > adjustments > replace color.  But it doesn't seem to be the right tool. Do you know the right tool?

    The selection of the color seems too nit picky for the small fine lines. Or is that what you HAVE to do, selection at real close up.

    Feels like you should be able to say, see this yellow? Replace it with this color: #ccd84b.

    Thank you for advice or suggestions,

    Julie

    http://www.color-hex.com/color/ccd84b is where I found a lot of info but not the hue, saturation, numbers of light Photoshop wanted when I did

    Given that this logo is very simple, I think you could best chance ave to isolate the color that you want to edit and add a new fill layer of solid color with a mask of the color you want and remove completely the old color on the other layer. for example:

    Make a copy of the green channel and use level to make the black bg and the color you want to replace white - don't worry about the text.

    Then add a new layer of solid color fill the same color as the background color. Add a mask to display all the text.

    Add another layer of solid color fill, then use your new color. CTRL-click on the channel that has isolated the ground and invert selection ctrl-shift-i. Then fill the new black solid color adjustment layer mask. You will then need to hide the type. The advantage of this way, it is that you do not have questions to try to match the color in the pixels of the anti-alias, which rarely works well.

Maybe you are looking for

  • I have problems with gmail with firefox. Refreshing page is slow; Drag and drop files in email sometimes do not work.

    My problem is mainly associated with gmail. When I click on return to the Inbox after reading a mail, it takes a good few seconds while in the past, it was always instant. My other problem is drag them / move the files as an attachment in gmail. Some

  • DesignJet 5500: firmware update error

    The firmware on my printer is: S.03.12D I went to this URL: http://h20566.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=82219 & swLangOid = 8 & swEnvOid = 181 and downloaded the firmware under Windows 2000, even if I have Windows 7 64 bit on my com

  • Part number AC JACK FRU T530 help

    I need to order a few PLUG AC spare for T530. Unable to find the correct part number.

  • Photosmart C6380: You print envelopes

    The printer will feed into an envelope, but before you start to print it stops with the message "loading the paper in the main tray. There is paper in the main tray and the envelope is not blocked because it feeds on when I turned off the printer off

  • Camera front with A1 problem

    When you use Skype video call mode, my picture is upside down! It is also upside down at the end of the receivers although their image for me is OK. No idea why this is and if there is a solution. The other way to the top by turning the tablet makes