Replacement of HDD on R61E - need help!

Similar Questions

• need help to change my macbook pro hdd

  Hello. need help to change my macbook pro 13 "mid 2012 hdd. witch HDD I buy 1 TB 7200 RPM 2.5 witch should I choose sata2? or sata3? If you know any suggestions, it would be really appreciated. And when I add the new hard disk can you restore with lion at el capitan?

  Thanks for the help.

  A 2012 MBP has SATA 3 connectivity.

  If you want to install a new HARD drive, the best approach is to clone the new from the old HARD drive.  It will duplicate the original HARD drive which has likely El Capitan installed.  I suggest to use Carbon Copy Cloner to the process.  It is not free, but worth it because you can use it to create a backup disc drag.

  Here's the Setup instructions for your MBP:

  http://eShop.MacSales.com/installvideos/macbookpro_13_unibody_mid12_hd/

  Ciao.

• I need help with a problem of file softdub.dll any answers or how to replace it?

  I need help with a problem of file softdub.dll all the answers, or how to replace it?  Yes, it's a problem of Vista vs itunes and apparently I lost? This file somehow.  I have no idea how blessed remedy.  I tried all the normal fixes / easy I know, but I am a novice at best.  so please, be gentle and try to guide me through a response.  Please, I beg you!

  Hello

  Did you download and save iTunes on the desktop > then right-click > select run as administrator to install?

  If you don't have anything done, see if this information helps you.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  «Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»

  http://support.Apple.com/kb/HT1923

  If the advice already given does not, please contact Apple for assistance.

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  See you soon.

• Support stand not provided my replacement WRT-ngn350 - need help with Cisco contact

  Hello!

  I'm starting to feel like Michael Douglas in the movie Falling Down and need help.

  History:
  Finally, I sent to my bad WRT-ngn350 router and when I got the replacement of all but the plastic leg support has been included. I want to have my router stand up to save desktop space, but now I have no foot.

  "OK, should not be difficult to get Linksys to send me the missing foot stand" was my thought. Now, I called the online RMA and also emailed them and I get a similar response as Michael Douglas took with a smile

  I hear that I can't get the part because it is not on the list the content of the product. As this is * my * problem. I want the part and do not care if it's on a list or not. It is the part on the router in the image. I even asked the representative of Linksys to Google a little bit WRT-ngn350 and there are foot stands on almost all of the images and it is certainly included in the box. I was told that I could go nowhere elsewhere to help with that. I really some doubt but fail to find a channel of Linksys, which may be able to help.

  

  If some representative of Linksys sees this please help me!

  Thanks, Niklas

  RMA XXXXX - lack of router support/foot

  (Mod Note: under the guidance of the compliance of the directive.) E-mail deleted conversation.)

  SOLVED!

  The representative of Linksys has managed to dig a booth for me to a warehouse. It is mentioned that it is a unique thing because some parts should be sent. Don't forget to remove the stand and send only: router, power and eventually cable NW.

  Thanks to Linksys representative.

• Need help to understand why my downloaded PDF doc displays "Please wait...". If this message is not finally replaced with the appropriate content... "after that I have already downloaded the version update for windows 10

  Need help to understand why my downloaded PDF doc displays "Please wait...". If this message is not finally replaced with the appropriate content... "after that I have already downloaded the version update for windows 10

  This is because the PDF file is not be open in Acrobat or Reader, but by the browser which is unable to handle the specific PDF content.

  If you use Firefox or Chrome, follow these steps: https://helpx.adobe.com/livecycle/kb/xfa-forms-firefox-chrome.html

• Guide: replace the HDD with SSD, Lenovo Y480

  Lenovo
  That's how I replaced my HDD with a SSD in my Lenovo Y480. I did it immediately, so there is no user file to consider. I used a key from Lenovo recovery. Read this guide in its entirety before starting.

  Execution time: about an hour.

  Items, you will need:

  -Y480 Lenovo

  -New SSD (I chose a Mushkin Chronos Deluxe because my research lead me to conclude that it is the best available from June 2012)

  -Small Phillips screwdriver

  -Butter knife or similar to remove the HARD drive. There is not much space for your fingers in there.

  -DVD-r blank

  Step 1

  Turn on the computer.

  Step 2

  Write the number '1' on a blank DVD-R and insert into the optical drive.

  Step 3

  Press the small button just to the right of the power button. This launches a recovery key.

  Step 4

  Follow the instructions on the screen to make restore disks. I chose the factory restore option, which required three DVD - Rs. label each disc with numbers to let you know in what order to use them later. Once it is finished, place back #1 DVD into the optical drive.

  Step 5

  Physically remove the hard drive and insert the SSD drive by following the instructions below.

  1. turn off and unplug your computer, flip upside down.
  2. remove the battery.
  3. remove the access panel by removing the two screws and slide.
  4. remove the two screws that hold the hard drive carrier.
  5 remove the hard drive by lifting upward. There is a right angle SATA adapter plugged into the hard drive. This card just came out with the hard drive.
  6 disconnect the hard drive adapter and plug it on the SSD.
  7 unscrew the hard drive bracket and screw it on the SSD.
  8 put the SSD drive in the Bay, screw the support down and replace the access panel. Be sure to screw it up.
  9. replace the battery, lock.

  Step 6

  If you did not already the first recovery DVD in the optical drive, use a paper clip to open the optical drive and insert the diskette. Close the drawer, then turn on the computer to start the restoration.

  Step 7

  Select the boot drive by pressing F12 when you see the Lenovo logo during startup, and then select the optical/DVD drive in the list.

  Step 8

  Follow the instructions on the screen. The first time that I did, restoration impossible immediately, probably because of a missing partition. However, after restarting the computer by performing a battery pull, then continue to step 6 restore completed successfully.

  I have not compared this drive, but I can tell you that the Windows experience index is 7.9 and startup time is 24 seconds now. The base index is 6.8 for this system now.

  You will find that Windows has already helped TRIM. However, regular defragmentattion was still on. I think that the system restore has been disabled automatically.

  Good luck

  Matt

  I saw no option for this, and I was quite surprised, that he didn't do it automatically. I'm not an expert on everything, so what follows is a guess.

  Perhaps that if you create a partition on the SSD first, recovery will recognize and use it.

• HP Pavilion p6510t won't start, need help!

  Hello, we have your desktop HP Pavilion p6510t with the following specifications:

  HP Pavilion p6510t PC

  • Genuine Windows 7 Home Premium 64-bit
  • Intel (r) CPU Pentium (r) Dual-Core E5400 (2.7 GHz, 2 MB L2, 800 MHz FSB)
  • SDRAM DDR3 800 MHz 4 GB [2 DIMMS]
  • 320 GB HDD at 7200 RPM SATA 3 Gb/s
  • Microsoft Office Starter 2010
  • No additional security software
  • Integrated graphics - Intel(r) Graphics Media Accelerator X 4500 [VGA]
  • No speakers
  • LightScribe 16 X MAX drive DVD +/-R/RW SuperMulti
  • Built-in Ethernet port, wireless
  • Audio Reader, 2 USB, 15-in-1 memory card
  • No TV Tuner
  • Integrated sound
  • HP USB keyboard and optical mouse

  We also bought this monitor to her (though I doubt it's important in this case):

  HP S1931a 18.5 "diagonal LCD screen

  The problem started about two months ago when the computer turns off without reason then that slowed down (before sleep should have started). After the computer restarts, he gave the beep codes that there was a problem with memory (1 short beep, 1 beep, long pause, repeat) long. After power back off and remove all devices and the power cable, the RAM has been removed (2 x 2 GB), checked for dust, bad seats, pins bent, etc...  The 2 RAM sticks have been resettled and the problem seems to be resolved.

  Fast forward two months (a bit more under warranty), the same problem occurs. This time, replace the RAM has not fixed the problem. Sometimes the computer should boot properly and then randomly cut regardless of what the processor was doing (idle or under load of 25% or more). In addition, beep codes would perhaps only half the time where it would not start. The output has been verified for feeding and another (proven) outlet has also been tried. No change. At this point, the computer won't be enough for any start screen at all, not even a blue screen.

  What he do to power on:

  • All powered fans (power supply, fan CPU cooler, case) and a spin at full speed.
  • Hard drive to wind up.
  • Green light on the power supply remains stable.
  • VA CD drive open and close normally.

  What is does not power upward:

  • No display at all.
  • No beep codes.
  • No blue light on the button walk / stop (top of case).
  • CPU does NOT get hot to the touch after 5 seconds to be under tension (with the fan and the heatsink removed and unplugged).
  • With two strips of RAM not removed, no beep of any kind.

  I also tried to use an old video card, I had to hang out, thinking that maybe the onboard graphics card were no longer works. The video card gets power as his fan runs, also at full speed. Still no display.

  I already bought a pair of replacement RAM sticks, exact same specifications and brand (Crucial), no difference. I tried all combinations of each stick into each slot with the original of the RAM in the first place, so I assumed it was sticks and replaced. Now that the RAM has been replaced and no beep codes, I suspect the motherboard or the CPU.

  I also tried to reset the BIOS by removing the battery for 10 + minutes and also move jumper to 2-3 1-2 during 10 seconds and replace (with power off).

  What I want to know is which component I need to replace to get this computer working before its tax season. I'd like to think it's the processor, because it remains cold to the touch after turning on. If this is the case, can someone confirm that this is a suitable replacement? (Intel Pentium E5700 Wolfdale 3.0 GHz LGA 775 65W Dual-Core processor desktop BX80571E5700) http://www.Newegg.com/product/product.aspx?item=N82E16819116381

  If it's the motherboard (I hope not), it can be replaced without having to re - install windows? I can't find an exact replacement for the H - I41 - Μatx Foxconn (Eton). HP has one of these in stock that could be shipped out?

  I know that the computer is already out of warranty (barely) and can do the work myself, but need help to determine the problem I want to throw the money to do this work right.

  Thank you in advance for your help!

  John

  Hello jkalbin, I think a bad mother rather than the processor card. Chess with the processors don't happen often at all. You should never feed a computer with radiator/fan all not attached to the processor. Just 5 seconds without the radiator/fan could easily burn a processor.

  The fact that the processor had no hot does not mean it does not work, if the motherboard does not send power to the processor.

  Motherboard failures are many times more often than the failures of processor. I had one processor to fail in more than 25 years of working with computers.

  Just some thoughts.

• Hey, I need help☹️ my battery dies so fast and what suite 26% it's just farm off☹️

  Hey, I need help

  my battery dies so fast and when on 26% it's just... If turned off on me I need help

  Please read this article for suggestions, including turn off background App update.

  http://www.Apple.com/batteries/maximizing-performance/

  Also try to download the app battery life which is available for free on the App Store. Check the battery with it and if defective, schedule an appointment in an Apple Store for eventual replacement.

• Need help! SR1830NX

  I recently bought a new video card, e-GeForce 8800 GT from NVidia (EVGA) and he said that must be a minimum of power supply 400 watt with 26 amps on the rail + 12 v and an additional PCIe power connector (or two connectors of HDD).  My current diet is only 300, so I know that it won't work, but I just need help to choose a new power supply.  I did a little research and it seems that http://www.bestbuy.com/site/olspage.jsp?skuId=8545158 & type = product & id = 1188560188623 this product will work, it's high notes and all, but I wonder if it will work even with my computer.  Once again, I have a Compaq Presario SR1830NX and am just wanting to upgrade to a better diet.  Will be the one that I chose work w / my motherboard?  Thanks for any help!

  http://www.Newegg.com/product/product.aspx?item=N82E16817371006 I think it's the only one that I will eventually buy.  = D a person left a comment indicating that the + 12V "double rail" was in fact a single rail 30 a, and it is 430 watts, so I think it should work without a doubt!  = D thank you very much for your help!

• Tecra R840 - need help for installing the SSD

  Hello

  Sorry, again, but I really need help with that?
  My new ssd (arriving in a few days) is a Plextor M5P which is 7 mm thick! My Tecra R840-16J have a thickness 9.5 mm HDD and what I've seen is no caddy!
  I would be grateful all the tricks for installing the ssd drive in my Tecra!

  Thanks for your time,

  Paulo

  Hello Paulo

  As far as I know that some models are available with drive HARD and some with SSD these models with SSD have small SSD support. SSD is fixed by 4 screws in this medium.

  I put t really know how to help you now. Maybe you should contact the nearest Toshiba service provider and ask for help. I think they can check the part number of this door - or maybe order one for you.

• AY747AA: I need help my pc has 1 short beep, 1 long beep

  Hi there I seriously need help you guys with my model # P6310Y.

  I constantly hear 1 short beep and 1 beep long when I try to start my PC. According to hp, it's a memory problem, but I proved it wrong.

  I went to remove the RAM check if one of the modules is bad.they are all good 2 GB x 3.

  I also removed the disk hard windows 7 and I still get the beeps that I described above. I made sure that all the cables are correctly seated and I cleaned the MOBO set for dust, including the CPU.

  I get a white one on my screen nothing shown.

  When I plug the keyboard I get no power, lights (NumLock, CapsLock) etc.

  The mouse is powered.

  I replaced the power supply always get the beeps and I can remove it all cables, hd, mouse, KB and the beeps continue.

  Please help me guys that I have reached a dead end and I thank you for your time,

  Sincerely,

  tech1126

  Quote from Wikipedia:

  S/PDIF (Sony/Philips Digital Interface Format) is a type of digital audio interconnection, used in audio devices to the audio output over relatively short distances.

  In any case, it's time to "responsibly recycle" this motherboard and get a new one.

  You traded all that was possible exchange, without solving the problem.

  Pull on all small riders off the coast of the old MOBO and then save them.  They might be useful.

  Try to find a MOBO from the same manufacturer with the same type of CPU (Intel processor) or AMD in AMD.

  That increases the chances of (stored on the current hard disk) Windows being able to reconfigure itself to adapt to the new hardware configuration.  This "correspondent" also helps to position all the external (USB, Ethernet) audio connectors on the new MOBO to physically enter your current case.

• Need help... New office which does not recognize the IP address

  I need help, my father, I bought a HP for Christmas to replace its old.  Problem is that I can't the computer to recognize the INVESTIGATION period, it says all drivers are working correctly, but still cannot connect either wired or wireless.  I have only addressed dells, it's my first experience with HP on Vista.  I need help fast because I'm about to go home and I would like to have him upward and running, any help or suggestions would be greatly appreciated

  I appreciate the suggestion and assistance.  After talking with tech support, they said it was actually the computer, I returned it and got a replacement and everything works fine.  Once again thank you to all who helped.

• error 4MOT/4/40000003; HDD-1219. Any help

  error 4MOT/4/40000003; HDD-1219. Any help?

  This error code indicates usually that your iMac has detected a problem with the fan/fan, which is used to cool the hard drive. You should probably contact a service provider to have it inspected and replaced if necessary. They will also check the obstructions like the dust bunnies.

• Need help with the decision of the laptop

  I'm sorry for the length of this post, but I really need help. I am buying a laptop and what should be a very exciting perspective (my first laptop purchase) turns into a nightmare that had me pretty much in tears over the weekend.

  My budget is not big - absolute maximum of 600 pounds, but I'd rather spend a little less than that.

  I mainly work of office (Word, Excel, database and PowerPoint) and also some Photoshop work. I also play a strategy game called Caesar 3. I want to charge my copy of XP on the computer or replace Vista or as a partition.

  Looking through the available templates in my price range and rising benchmarks, I found the following:

  Most have processors such as the Intel T5250 or T5450 or AMD TL 58, which are all rated as ok, but not very well. Some have the AMD TL 60, which is a little better and one or two have the T7200 Intel which is even better.

  On most of the machines graphics cards are the ATI Radeon Xpress X 1200 or the Intel GMA X 3100. These two are calibrated as not terrible and the review says that they cannot manage strategy games. Some of the models have the ATI Mobility Radeon HD 2400 and HD 2400XT and one or two have the HD 2600.

  The problem is that the models that have the best processor have the lower rated graphics card and those who do not have XP drivers, I see.

  Don't mind a 15.4 screen "(although the 17.1" would be very nice to have) and want a pretty big hard drive (160 +). I get 2 GB of RAM.

  I'm at my wits end. I don't want to buy a computer that will eventually take a minute or more to refresh a screen when you have more than two things open, or you will have to keep rebooting to make it work. I want to be able to play my one and only (Caesar III) game which is a strategy game and I want to be able to work in Photoshop and maybe one or two other things open at the same time, as a website perhaps.

  Help me please, anyone. I asking the impossible? I can't get my hands on an email address for Toshiba try to get clarity on their part on the issue of drivers and they will be available in the future.

  Then there is of course the issue detailing as each stock only a limited number of models, and we must choose between those detailing.

  I hope someone can help me!

  Hello

  The problem is you want to buy a laptop all over the place but don t want to spend a lot of money.

  In addition, you want to change the XP operating system and have XP drivers.

  Well it's boyfriend very difficult decision ;)

  A laptop for gaming with the graphics power full card cost slightly more than £ 600
  If you need to make a decision; You want to buy a gaming laptop and to spend more than £ 600 or you will have a notebook that is ideal for everyday use, like watching DVDs, in collaboration with the office software, etc.

  The Caesar game is unknown to me, but I assume that it doesn t need a graphics card high performance and it should work on a normal phone too.

  I think that a Satellite a200 is not bad choice for you, because some A200 laptop computers were shipped with the Intel Pentium Dual-Core processor and an NVIDIA GeForce graphics card.

  And very important is that all the XP drivers were already released ;)

• List of Satellite A200 drivers... Need help...

  Ok.
  I need help with this...
  There are some things in the list that I don't know where to find them...:

  8 step by Step Interactive Training (Pro) for the ENG version
  Module 9 SLP OEMSLP2.0 (523759)
  10 Microsoft .NET Framework V1.1.4322 (SR1)
  11 Sun Java 2 Runtime Environment V1.6.0

  And this one, I guess I have to replace with the ATI driver:

  13 Intel VGA driver 6.14.10.4833 965GM

  And this one I don't know:

  22 iMSM.reg 20070512

  Of these two, I can only find the first condition in the drivers download page:

  Monitor 27 Bluetooth V3.01 (Build20070215)
  Bluetooth Stack for Windows by Toshiba V5.10.06T 28

  What about this:

  V1.0.0.1906C Fn-esse TOSHIBA 36

  In any case, there are a lot of things in the list that do not exist in the drivers download page...
  I don't know what's wrong, but it is not very useful.

  And after putting the drivers I find _can_, I always get 2 points mark in the Device Manager...

  ? -Audio device on High Definition Audio Bus
  ? -PCI memory controller

  So, any help would be useful.

  Thank you...

  I put t really know what your problem is.
  All the XP drivers are available on the Toshiba page!

  > iMSM.reg 20070512
  It's the Intel Storage Manager! Can be found on the page of Tosh too!

  > 27 Bluetooth Monitor V3.01 (Build20070215)
  > Bluetooth Stack for Windows by Toshiba V5.10.06T 28

  BT monitor can be found on the Toshiba driver page.
  The stack of BT here:
  http://APS2.toshiba-tro.de/Bluetooth/

  > 36 TOSHIBA Fn-esse V1.0.0.1906C
  You need the Hotkey Utility allows you to use the FN keys! But note; v.5.2 BIOS for XP must be updated!

  >? -Audio device on High Definition Audio Bus
  It is his driver. It can be found on the page of Tosh too!
  You can also use the audio driver from the Realtek site.
  Notes; MS (patches) KB888111 and KB835221 patches must be installed!

  >? -PCI memory controller
  Follow the Flash Media Driver and Chip Set Utility have been installed