Replacement of motherboard on the Satellite 5100-603 - BIOS update is required?

Hello
I just replaced a dead card main satellite 5100 603 with a new main Board which I could get on ebay (Toshiba card system FNZSY2 - A5A000160010 P000341750-Ref.). If I boot with an installation of XP DVD it starts but hangs with the message "unexpected error (536674392) on line 1768 in D:\xpspi\base\boot\set-up\arcdisp.c".

I realized that there are versions of different bios for various models 5100 satellite. I think I flashed the bios of 5100-603 last for this problem.
Is this correct? (start with BART-PE from CD or HDD BART-PE raises the same error msg text in another look)

Hello

to get your motherboard to work you must write about the UUID (Universal Unique Identifier).
As far as I know, you can get the UUID to a Toshiba service partner writing tool.

Good bye

Tags: Toshiba

Similar Questions

  • USB 2.0 on the Satellite 5100 603?

    Hello

    I had to reinstall my laptop with the original recovery CD
    on Windows XP Home Edition. I ran the updates.

    Because I used several USB devices, the system tells me that
    I have to connect this device to a USB 2.0 to get the fastest
    connections.

    I'm sure that I've never had these messages before.

    Does not support my 5100-603 improved USB?

    OR

    What drivers should I download and where?

    Thank you for your help in advance.

    Oliver.

    Hey Oliver

    These messages are nothing unusual if you connect USB 2.0 devices to broadband to a laptop with USB 1.1 port.
    Yes, as much as I know Satellite 5100-603 supports only USB 1.1 and not 2.0 USB ports
    This is a limitation of the phone hardware and may not be updated with all the drivers.

    I imagine that get you t has not all messages in the past because Microsoft QFE updates were not installed.
    In any case, nothing wrong in you unit.

  • Once the Satellite L350-172 BIOS update will not boot

    Satellite L350-172 Bios setting bios-20090203164614 bios-201002250 updated

    I just lie down the BIOS of my notebook to 1.60 to 2.20. Now, the laptop no longer starts.
    'He was arrested for reason not to damage the computer' - blue schreen.

    How can I downgrade the bios again? Or - that I have to change in the bios settings?

    >.. .which I change in the bios settings?
    If I understand you just can't start your laptop so enter the BIOS settings is not possible.
    Can you confirm this?

  • HARD drive failed on the Satellite 5100-603 - PXE - E61: Media test failure, check cable

    Hello

    my laptop enter to the BIOS and tell me 'Intel (R) Boot Agent Version 4.1.03 Copyright (C) 1997-2002, Intel Corporation.
    PXE - E61: Media test failure, check cable
    PXE - B0F: Exit Intel Boot Agent.
    Insert system disk in drive.
    Press any key when ready... »

    and I started to install windows, it tells me 'hard disk without work... '. »

    Help me please

    Hello

    Sorry but I don't understand what kind of help you want. If the HARD drive is faulty, you should exchange it.
    Moreover, what model of laptop do you have?

  • Satellite 5100 603: where to find a new graphics card?

    Hello

    I am currently the owner of a Toshiba Satellite 5100 603. The problem is the video card. But I can't find a new or second hand video card for this laptop anywhere.

    Anyone has suggestions where to look for this card or maybe has a replacement part or with the problem I described a few lines (lines and twinkle in your screen) back.

    Try eBay. You will find lots of laptop parts. Google a bit. For new parts is no problem to find them but second hand parts

  • NVIDIA 440go graphics update map satellite 5100 603

    Hello
    Take full advantage of my laptop to the game and seems to address most of the games, but graphical technology moves.
    I want to update the graphics card from nvidia on my satellite 5100 603. Can anyone recommend a card appropriate to upgrade with (for mobile).

    [Edited by: admin on 11 February 06 20:37]

    Hi Alison

    Many users of this forum asking for updates of graphics options. I must tell you that the upgrade is not possible. The graphics card on the laptop is different, like on the desktop pc. It is a small chip that attaches to the motherboard.
    Unfortunately, it is not possible to s.

  • Satellite 1130 Z24 BIOS update problem.

    I have download the proper file, but saves it as tw30170w.rom. How do I run it? Windows does not recognize it.

    Brian

    Hello
    I would try it with the traditional Biosupdate.

    Download bios here-> http://eu.computers.toshiba-europe.com

    Watch "Support & downloads", click on "Download Bios" a choose your model

    How to upgrade the BIOS

    Satellite 1130

    1.) extracted the zip file containing the BIOS upgrade to a temporary folder.
    2.) insert a 1.44 MB diskette formatted in the floppy drive.
    3.) Execute the file *.exe extracted to the temporary folder. Follow the instructions on the screen. A BIOS update diskette will be generated.
    4.), make sure that the laptop is plugged into the sector.
    5.) turn off the laptop.
    6.) place the floppy disk containing the BIOS upgrade in the floppy drive.
    7.) turn on the laptop with the F12 key.
    8.) the BIOS boot menu appears. Select 'Removable Device', 'USB Floppy Drive' or the diskette symbol using arrow keys. Press "enter".
    9.) the Notebook will start from the BIOS upgrade diskette.
    10.) the BIOS update will start automatically.
    11.) after a few minutes the laptop turns off automatically, remove the disk and do a restart. If it does not then remove the disk and turn off the system and return to restart the laptop.

  • Working on the Satellite 5100-201 remote control?

    Hello

    I have a Satellite 5100-201 und I bought an original toshiba remote for the 5200-801. But it Don t work in my laptop, I install a driver? or it is not compatible with my laptop?

    Sorry for the bad English, I m of the Germany and do my best.

    André

    Hello

    When you purchased your portable Satellite didn t you get a remote control? If this isn't the case, then the unit is not ready to use the remote control. You can also refer to the manuals of s.

    AFAIK all units with remote installed a small application called controls. Check in Control Panel if you can find something like that.

    Good bye

  • Replacing hard drive on the Satellite A60-S159

    grateful for the help on the situation of the Hard disk on the Satellite A60-159 and advice on removal and replacement of the HARD disk.

    Hello

    Well, I put t found any blankets or slots at the bottom of the unit. In this case, I think that he must remove the keyboard and some other covers.
    But if the warranty is valid you must contact the ASP for replacement because if you open the Notepad or if you remove the covers you lose the warranty.

    Good bye

  • Toshiba Satellite 5100 603

    Instruction for Satellite 5100 503 says max. capacity of RAM this laptop can work is 512 MB. It is strange to me. Why I can't upgrade memory in my book, it's efficency, but 512 MB is too little for me. I use Windows XP Prof. with many programs, that's why I need of more memory. Additional distributor of Toshiba laptops in my country clamis that this model can work with 1 GB of RAM. I don't know really who right. Help me, please.

    Hi emifer,

    This Machine can run up to 1024 MB of Ram (RAM-PC2100DDR)!
    For Toshiba 512 MB Ram order Code is PA3164U.

    Good bye

  • Satellite 1410-604-BIOS update > update BIOS Incorrect in the web?

    Hi there again!

    Now with a new and strange issue.

    We all know that tell old... "If it does not break, don't fix it." And if you put in more computer terms, "especially if it's a BIOS.

    Yes, we all know that the BIOS is something quite dellitate to manage. For some reason, we normally feel as if we manage something like nitroglycerine, or radioactive products. And it's because we all know who is put at risk at the moment: our (or sometimes other) computer, the whole system could end up as dead as some pieces of metal, plastic and son.

    Well. I passed through all of this, more than 10 times in my life, and only once, it went wrong. But since this old motherboard was already dead, it was not important. But I've always been EXTREMELY care. Allways cross checked everything before you do anything, allways has a backup and a way to allways and restore that backup... I did COMPAQ systems, which have been prepared in this way. A BIOS update was about about a disc, turn on the PC with the disk in the floppy drive and wait. And if you don't like the results, you just click on 'back to a previus BIOS' and that was it... very nice. And easy.

    A few days ago a friend gave me a Toshiba Satellite 1410 604 to solve some problems that have been her crazy. After you remove a Norton Internet Security has expired, install avast and scan, I found more than a hundred of files infected with a variety of viruses, malware, trojans, and everything you could imagine. Avast all removed, but the rest of the operating system was so unstable that we decide to format it and install from scratch.

    I asked for the restore disks, which obviously it failed because they were lost in one of his trips. After that we had confirmation of Toshiba representatives there is no disk recovery available for this model, because it is too old, we decided to install from scratch like any other normal PC and resigned to losing some of the utilities accompanying that CD and are not available for download on the Web site.

    I downloaded all the software available for this model, including two updates to the BIOS. (In reality an update, but in two versions: Windows and traditional) and prepared a CD with all the drivers and programs as if it were a new system installation. And everything was fine, no problems at all. Until we arrived at the wireless LAN card, but that's another problem is already solved (the mini PCI card for the WLAN does not support the encriptación WEP or WAP, and it is not possible to connect to any LAN encripted wireless).

    At this point, and when I started setting up and activation of peripheral PCMCIA and USB devices (this computer only supports USB 1.1, 2.0 not) I discovered this text from Toshiba Web site:

    "This Bios update adds functionality to your system.
    (BIOS stands for Basic Input and Output System. This program is stored in a chip memory dead on the motherboard.
    When the computer comes on, the BIOS is launched to perform various functions to start.)

    For more detailed updated information, please refer to Information update BIOS Toshiba"

    (you can find it here):

    [http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU], you need to search for:

    Archives
    Satellite
    Satellite 14xx
    Satellite 1410 604
    PS141E

    Quite specific. Isn't?)

    According to the information in this Web site, the available BIOS fits the following models:

    "Satellite 2410 414, Satellite 1410, Satellite 1410 - 654S, Satellite 1410 814, Satellite 2410-303, Satellite 2410-304 s, Satellite 1410 354, 2410-601 Satellite, Satellite 1410-401, {color: #ff0000} * Satellite 1410 604 * {color}, Satellite 2410-404, Satellite 1410-301, Satellite 1410-304, Satellite 2410 S403, Satellite Pro 2100, Satellite 1410 S203, Satellite 2410-304, Satellite 1410 554, Satellite 1410 S102, Satellite 1410 - 354F, Satellite 2410 703, Satellite 1410-303, Satellite 2410 - S203, Satellite 1410-801, Satellite 2410 603, Satellite 1410-902. ', Satellite 1410-313, Satellite 1410-802, Satellite 1410 714, Satellite 2410-354, Satellite 2410 514, Satellite 1410-614, Satellite 1410 704, Satellite 2410 515, Satellite 2410-504, 2410-702 Satellite, Satellite 1410 S103.

    Yes... it's here!

    Now when you go into the "Toshiba BIOS update information", you get:

    "Ref. FAQ: TRO0000000b07.

    A BIOS update is a {color: #ff0000} * operation is relatively simple and can be done by computer more competent users * {color}. All BIOS updates can be obtained from "BIOS update" Section download click here...

    Note: the BIOS files are specific machine the correct BIOS for your machine should be used. »

    Please note that Toshiba does not disencourage BIOS manipulation, on the contrary: they even encourage people to do. It is not badly needed, but at the same time that they encourage people to 'play' with such a delicate question, at the end of this page, in small letters, they say:

    "Toshiba provides this information"as is"{color: #ff0000} * without warranty of any kind * {color}, explicit or implied, including, but not limited to, the implied warranties of quality market or adequacy has a specific use." Toshiba shall not be liable to the topicality, accuracy, completeness or quality of the information provided. {color: #ff0000} * Toshiba is not responsible for damage caused by the use of any information provided, including incomplete or incorrect information * {color}. »

    This should trigger yellow alarms in our minds.

    + "Human error is inherent in man, and it is not possible to eradicate. It will be displayed always, sooner or later"(Prof. James Reason). +

    And finally, I made the mistake. Although I have read this warning, I remembered all these successful BIOS update with COMPAQ and relied for Toshiba. This update was available there, and Toshiba told me that it was for this computer. Great!

    So finally, I disconnected all devices (USB), removed the PCMCIA (WLAN), plugged the battery charger to avoid any possible battery problem, restarted windows, and then Windows started the update (windows version, such as recommended by Toshiba). This drug looked very nice, nothing different from what I usually see on these old COMPAQs.

    As reported by the update program, the system would restart. And in fact he did.

    Windows normally closed (a little faster than normal, but without mistakes, and since there is no other programs that most - even the antivirus not working - no), the computer turned off, all lights (normal) offshore, and then again on...

    {color: #0000ff} * BEEEEEEEEEEEEP... BEEEP... ... BEEEEP * {color}

    OMG! I never movement something SO bad. 3-1-1!

    And now... What a 3-1-1 is here? Award BIOS would mean no card graphics or video deffective card, but it is not true, because it worked 20 seconds ago. There are BIOS.

    He never came again to life. He's still 3-1-1 beep.

    But now comes the investigation on the human factors involved in this accident.

    I found I committed the following errors:

    * (1) * rely in the constructor, even if they have WRITTEN their information may be incorrect or incomplete. (BAD if I was a detective QA & QC).

    * (2) * I cross checked deep enough (until it was already too late).

    * (3) * I haven't looked above for how to make a backup of the BIOS to restore must anything deceive you.

    * (4) * let Toshiba lead me to a path that I didn't walk, just because of their supply of 'increased functionality.

    * (5) * Beleave in Toshiba when they said "relatively simple operation and can be performed by the most competent computer users"... they never said it is infallible. "."

    Then I began the most interesting part of the investigation.

    {color: #0000ff} * "what went wrong?" * {color}

    Obviously, the update of the BIOS has not somewhere, somewhere. And I wanted to know what and where.

    First thing, I discovered that there is another Toshiba search engine called "askiris" ([http://askiris.toshiba.com]) and I looked to see if, for any chance I could get the old BIOS 1.20 version which was installed at the origin of this machine.

    And I found something... VERY interesting:

    Bq. {color: #800080} * of: *------{color} {color: #800080} * ACPI BIOS Flash version 1.10 for Satellite 1410/1415/2410 *------{color} {color: #800080} * bios for these models. SHUT UP. Downloads. DL. 289838 289838 105481 ACPI BIOS Flash version 1.10 for Satellite 1410/1415/2410. 2002-10 - 04 105589... *------{color} {color: #800080} * published 04/10/02 *------{color} {color: #800080} * of: *------{color} {color: #800080} * ACPI Flash BIOS version 1.40 for Satellite 1410/1415/2410/2415 *------{color} {color: #800080} * FDD Version 1.30 shut UP. Downloads. DL. 357972 357972 105481 ACPI BIOS Flash version 1.40 for Satellite 1410/1415/2410/2415. 2003-01 - 31 105589 PUB... *------{color} {color: #800080} * published on 31/01/03 | Rating: *------{color} {color: #800080} * of: *------{color} {color: #800080} * ACPI BIOS Flash version 1.20 for Satellite 1410/2410 *------{color} {color: #800080} * error message when the BIOS TAIS. Downloads. DL. 305240 305240 105481 ACPI BIOS Flash version 1.20 for Satellite 1410/2410. 2002-11 - 01 105589 PUB... *------{color} {color: #800080} * published 01/11/02 | Rating: *------{color} {color: #800080} * of: *------{color} {color: #800080} * ACPI Flash BIOS version 1.30 for Satellite 1410/1415/2410 *------{color} {color: #800080} * 1) changed the content be QUIET. Downloads. DL. 330963 330963 105481 ACPI Flash BIOS version 1.30 for Satellite 1410/1415/2410. 2003 01 - 03 105589... *------{color} {color: #800080} * published on 03/01/03 | Note: * {color}
    These are: V140, V110, V120 and V130 for 1410/15 and 2410 series.

    GOOD! Or not?

    Let's take a look:

    First thing I did was download all four files.

    Then I took the same version that made the accident: 1.40

    I unzipped the file, which I found:

    2009-06-05 00:17 < DIR >.
    2009-06-05 00:17 < DIR >...
    31/01/2003 08:38 11410v14.iso 1 605 632
    31/01/2003 08:38 511 764 14 1370. EXE
    {color: #ff0000} * 01/08/2003 17:03 2410a9v140.exe* {color 724 480}
    01/09/2003 09:32 250 663 biofca9t.com
    10/08/2002 05:26 30 697 chgbiosa.exe
    31/01/2003 08:36 1 087 instinfo.bat
    2002-05-13 15:25 378 175 launcher.exe
    31/01/2003 08:36 433 launcher.ini
    2009-06-05 00:17 0 list.txt
    31/01/2003 08:36 14 768 readme.com
    * {color: #ff0000} 31/01/2003 08:36 12 513 readme.txt {color} *.
    11 archivos 3 530 212 bytes
    3 dirs 9,404,600,320 bytes free

    And I got my first surprise here: there is a {color: #ff0000} * README. TXT * {color} that was not present in the file that I downloaded earlier from the repository of drivers.

    So I went the readme.txt and I found this:

    'README. CDC TXT 31/01/2003
    Flash BIOS version 1.40 for Satellite 1410
    -----
    This BIOS is applicable for the following models:

    Satellite 1410-S105
    Satellite 1410-S106
    Satellite 1410-S173
    Satellite 1410-S174
    Satellite 1410-S175
    Satellite 1410-S176
    Satellite 1415-S105
    Satellite 1415-S106
    Satellite 1415-S115
    Satellite 1415-S173
    Satellite 1415-S174
    Satellite 1415-S175
    Satellite 1415-S176
    Satellite 2410-S203
    Satellite 2410-S204.

    Please note that the model 1410-604 is * NOT * listed.

    I thought ' well, there must be another archive... ". »

    But then I realized a name that seems familiar, that is, in the directory where I unzipped this file 1.40, and the name is:

    {color: #0000ff} * 2410A9V140. EXE * {color}

    So I took the other file, the update of BIOS_Win, and I discovered that the name of the file is:

    * {color: #0000ff} 2410A9V140. EXE, {color} * (Ups!)

    So I once again, uncompressed to find:

    El volumen of the D unidad no tiene etiqueta.
    El n£ series volumen del mero are: 8838-E175

    Directory of D:\Shared\diskette\2410A9v140

    2009-06-05 00:43 < DIR >.
    2009-06-05 00:43 < DIR >...
    * {color: #0000ff} 01/09/2003 09:32 _250, 663_ BIOFCA9T.COM {color} *.
    2002-07-17 03:38 biosupd2.ini 35
    13/07/2001 13:22 6 277 chgbios2.vxd
    * {color: #0000ff} 10/08/2002 04:26 697 _CHGBIOSA, 30. EXE, {color} *.
    11/09/2001 09:14 134 clean2.reg
    2002-07-17 03:35 342 064 install2.exe
    2002-07-16 06:55 241 664 nchgbios2.exe
    18/08/2001 11:41 3 435 nchgbios2.sys
    23/10/2001 18:55 11 476 nchgbios2NT.sys
    26/08/2001 09:00 49 152 nchgbios2svc.exe
    13/07/2001-17:05 49 152 tbdecode.dll
    2002-03-14 06:42 49 152 TCHGBIOSInfo.dll
    2002-06-21 11:25 1 796 tosclean2.bat
    11/09/2001 12:01 967 tosclean2.pif
    2002-06-21 11:34 toscleanAUTO2.bat 1 841
    2002-06-21 11:44 toscleanSMS2.bat 1 796
    2002-06-21 08:51 2 038 tosntclean2.bat
    2002-06-21 08:51 2 084 tosntcleanAUTO2.bat
    2002-06-21 08:52 2 038 tosntcleanSMS2.bat
    Archivos of 20 bytes, 1 046 461
    2 dirs 9,402,793,984 bytes free

    No readme file...

    Then another issue raised in my mind: what happened to the other file 1.40? What did the other 2410A9V140. EXE are inside?

    This:

    El volumen of the D unidad no tiene etiqueta.
    El n£ series volumen del mero are: 8838-E175

    Directory of D:\Shared\diskette\comparacion_toshiba\askiris\241 0a9v140

    2009-06-05 00:46 < DIR >.
    2009-06-05 00:46 < DIR >...
    * {color: #0000ff} 01/09/2003 09:32 _250, _BIOFCA9T.COM {color} * 663
    2002-07-17 03:38 biosupd2.ini 35
    13/07/2001 13:22 6 277 chgbios2.vxd
    * {color: #0000ff} 10/08/2002 04:26 697 _CHGBIOSA, 30. EXE, {color} *.
    11/09/2001 09:14 134 clean2.reg
    2002-07-17 03:35 342 064 install2.exe
    2002-07-16 06:55 241 664 nchgbios2.exe
    18/08/2001 11:41 3 435 nchgbios2.sys
    23/10/2001 18:55 11 476 nchgbios2NT.sys
    26/08/2001 09:00 49 152 nchgbios2svc.exe
    13/07/2001-17:05 49 152 tbdecode.dll
    2002-03-14 06:42 49 152 TCHGBIOSInfo.dll
    2002-06-21 11:25 1 796 tosclean2.bat
    11/09/2001 12:01 967 tosclean2.pif
    2002-06-21 11:34 toscleanAUTO2.bat 1 841
    2002-06-21 11:44 toscleanSMS2.bat 1 796
    2002-06-21 08:51 2 038 tosntclean2.bat
    2002-06-21 08:51 2 084 tosntcleanAUTO2.bat
    2002-06-21 08:52 2 038 tosntcleanSMS2.bat
    Archivos of 20 bytes, 1 046 461
    2 dirs 9,402,781,696 bytes free

    * {color: #ff0000} they have two 20 files and 1 046 461 bytes. I asumed that they are the SAME two folder {color} *.

    And the readme file does not list the model 1410-604 in its readme file, so I can't explain it except as a Toshiba error. * {color: #ff0000} they put an incorrect BIOS on their website and has proposed updating and somehow lead to such mistakes. {color} *.

    (Except in the case that one of these models is a name that is different from the model 1410-604, and if that's the case... now I don't know why this BIOS do not work with this computer).

    The worst thing is that neither the other files (V1.10, 1.20 and 1.30) lists the 1410-604, apparently so no solution possible workaround for this problem. I need an original v1.20 to the CMOS, and Toshiba seems to have. They offered me to solve the problem, leaving the laptop to an ASP, and pay only € 95 for the work and about € 280 for a motherboard replacement, I will get it resolved. But they offer no guarantees of their possibilities because is a model "too old" and "abandoned" and "unsupported"...

    In other words, they said 'you don't have to bother with it, just go and buy a new' (something of quite out of my reach in this time of crisis): P

    Thanks for reading so far.

    Now, what I need is to get ideas on a work around for this, my ideas are:

    (1) the CMOS has some startup that works (it allows a roll-back if you have the appropriate file). So I need a good BIOS to burn in the CMOS memory, the SAME SAME model (a backup BIOS) but the backup should be sufficient for the burning program (CHGBIOSA.COM).

    (2) it is always possible that the BIOS might be OK, but the CMOS data has been corrupted somehow. If so, the CMOS of compensation could solve problem. But I wasn't able to find a clear cmos from the outside button, and after disasembling I took battery, with no good result. I try to leave the MOBO without battery for a period more long (I left it about 20 seconds) just in case where 20 seconds are not all capacitors for well pass zero values. I don't have a lot of hope in this point.

    (3) try to get a REAL good update from Toshiba. I contacted technical support several times, and I was able to verify that they are only - phone operators, with a script in front of them, and when the problem is going - out of reach, they fall in the same response: "you must go to an ASP. I still have a faint hope to find someone who really knows a little and could illuminate with a good BIOS in this disc.

    (4) as far as I could find, this BIOS is not any BIOS-manufacturer known. It seems that it has been developed by Toshiba (own brand), so the Phoenix crisis recovery disk won't be of any help here. As well as any other BIOS recovery tool not designed for Toshiba BIOS. But I'm open to all ideas, which could be put to the test more or less safely. (Remember that the 'BIOS-BOOT-PART' feature still works, I don't want to lose that possibility alone of redemption).

    Wwwaaaaoooowww... what a falks long post! Sorry about that!

    Forgive me, but I wanted to be really clear.

    Someone give some tips or advice will be greatly appreciated.

    Please don't say that I shouldn't be doing... I already know that. I already did some research and found my mistakes, not to repeat them. Now, I need to spend, to move and to try to solve this problem, or at least learn to solve similar things. As much as possible.

    Thank you once again, in advance, and sorry again.

    FenixDigital

    Post edited by: Fenix_D
    Modified subject to beter reflect what the problem is (apparently erroneous file BIOS in Toshiba Download Center).

    Hi Fenix,

    Wow... He tooked a lot of time to read your post...

    Maybe I can help you.

    The Bios in the website is the right one. If you have downloaded the right version of the Bios.

    Toshiba America, which has most of the time the Askiris you used isn't accurate models for Toshiba Europe.
    This should be the reason, why does not the readme file contain the European model.

    I'll try to do an update of the fresh Bios using the update of the traditional Bios.

    Copy the files on the disk, put it in the floppy drive, press and hold power on the notebook tab.
    After that the laptop is off, press on and hold the key on the left side of space power on the laptop new bar and wait until it turns off again.

    If your laptop does not power perhaps the most, the RAM is default?

    Therefore, if the use of the traditional Bios or change memory doesn't help, and your laptop is still dead you should go to a SPA, but it will cost money.

    I now have my fourth Toshiba laptop and I had never problems with the Bios updates.

    The 1410 is very old I think, so before you go to a SPA, I'd buy a new ;)

    Best regards

    Maurice

  • Satellite 5100 501 BIOS

    How to enter the bios on a 5100 501

    Hi jm,

    the BIOS of Satellite 5100 503 could only be changed with the Toshiba HWSetup in the Panel!

    When you press the power button to launch the Notepad you can just press ESC, when the Red Toshiba logo appears, the default value of the BIOS!

    Bye Sammy23

  • How to remove the Satellite Pro 2100 BIOS password?

    Hi one of our former workers have our business sp2100 laptop and recently left, now we went to use the laptop and it has a password on it.

    We cannot get in touch with the ex-worker and now have a laptop useless?

    can anyone help?

    HEY Mac,

    Unfortunately, once a BIOS password is set, it is not a simple procedure to reset unless the original password is known. It is a simple but effective measure to protect the PC or laptop in case of theft, so obviously any widely known for the bypass procedure would make it inefficient.

    You will need to contact an authorized Toshiba Service partner who, after having completed the audit of the ownershipo re-flash of the BIOS chip to remove the current password, or replace the motherboard (including the BIOS chip) depending on the model.

    Good luck

  • Satellite A210 PSAFGC - Bios Update to get rid of the white screen problem

    I also have the white screen problem and I would like to update my bios to version 1.30, it came with.
    The problem I have is that I have a number of room A210 model PSAFGC.
    Support bulletin 98082422 for the update of the Bios does not have my room exactly number and I can not find something for my model.
    The 2 updates are at 1.70 and 1.90. I read the text of these two, and they seem quite different.
    Don't know what to do. Here is the info of the bulletin.

    Resolution:

    Update the BIOS of the computer to resolve this problem, by clicking on the link in the following list for your computer model.

    -Satellite A210 / A215, Ref. PSAFGU: BIOS version 1.70
    -Satellite A210 / A215, Ref. PSAEGU and PSAELU: BIOS version 1.90
    -Satellite Pro A210 / A215, Ref. PSAFHU: BIOS version 1.70
    -Satellite P200D / P205D, Ref. PSPBLU and PSPBQU: BIOS version 1.40

    REF. of the computer it is printed on a label on the underside of the case.

    Any help?

    Hello

    The Satellite * A210 PSAFGC * series seems to be a Toshiba * Canadian * series and I would recommend checking the Canadian driver Toshiba page if you want to download the compatible BIOS for your laptop.

    Here is the link to the page:
    http://support.Toshiba.ca/support/download/ln_bymodel.asp

    Best regards

  • Re: Satellite A300D-15B - BIOS update failed and now I get a black screen

    I've updated my laptop to run windows 7 instead of vista some time ago and my laptop was running, but the fan seems to stop working and I found that a BIOS update can fix this on this forum. The BIOS update has stopped responding partially through and I had to shut it down. I tried to run again, but he continued to come up with an error message. The laptop was working fine, but once I turned it on the next day I found that it is only responsible to a black screen. My laptop is out of warranty, but I thought I would send it out the hope for a decent price, but she came back with a cost of mounting A £400 for a replacement motherboard and price tag. Anyone know if these types of problems can be repaired without full replacement necessary?

    Thanks to advanced to someone who can help :)

    Hello

    You must contact an authorized in this case service provider. You should speak with the technicians because they try to reflash the ROM module where the BIOS is stored. This isn't expensive and it s worth a try! ;)

    You can find a list of the ASP s here:
    http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

    But in the worst case you need a new card of mother, but technicians must try to reflash the ROM module first

Maybe you are looking for

  • That means "missing product Configuration"?

    I downloaded firefox. I did the 'RUN' of the set-up file. It will not be implemented. I get "Missing product Configuration". I am running Windows 7.1.

  • The projectors are compatible with Equium P300-16 t?

    Hey, have recently bought this laptop and I am interested in buying a projector to use with the laptop. Discovered that the laptop can be connected to a TV-, but has some limitations on the type of TV. Wondered if there is no limitation on the projec

  • myRIO Servo demo does not: Servo sweeps back

    Hi all For the first time using LabVIEW and myRIO and I thought I'd run the demo of Servo. The question that it displays the following error message: If I choose to ignore the error my servo works but don't stop at a point (hold the angle) and sweeps

  • Sony CRX320EE CD - RW 16XDVDEIDE Int PC black burner DVD

    says my cd player is good, but it will still not play... there at - it something else I can do?

  • Application error 0x800106ba

    I get an error 0x800106ba once my computer opens. How can I get rid of this error and what I need to do? Error is also indicating that "to start the service, restart your computer or search help and support to find out how to start a service manually