Replacement of my memory

Similar Questions

• PowerEdge 2950 reporting & quot; E2119 Fatal SB Mem CRC & quot; before and after the replacement of the memory.

  Hello everyone, I was wondering if someone else has fallen on this.

  The server is a PowerEdge 2950 II chips running 8 X 2 GB server and recently presented the E2119 Fatal SB Mem CRC error. A reading of the article and seemed to replace the memory would be to delete it.

  I replaced the server memory with ram from another PE 2950 II who worked the night last and this morning its generators again errors.

  Someone at - it recommendations on what else to do? I thought maybe is it time to replace the motherboard, but I wasn't sure.

  Also to clarify, the server was closed and not connected during the memory swap for about 8 minutes. (I gave more time to erase everything).

  Is memory I replaced it with that which comes from another server who has worked for a few years with no problems whatsoever.

  Thanks guys and girls!

  You are fine with version 2.7. Clear the log material via the CTRL-E Drac/ESM prompt at startup then and let me know how it goes.

• Replace the RAM memory on TOSHIBA NB510

  Hello

  I just bought a Toshiba NB 510 - 10 d and I just can't find where should I change the RAM memory.

  Can someone help me?

  Thank you!

  Hello

  I found beautiful film from YouTube how to replace the RAM for Toshiba NB500, NB520, NB550D series
  http://www.YouTube.com/watch?v=6mnQQbladnA

  Select this check box.
  Remove the plastic cover at the bottom of the unit you will see the HARD disk and the memory modules. Spread the latches to lock two memory so that the module memory will appear. Pull the module from memory, and on an angle, using care not to touch the connectors. Remove the memory module.

  All that s.

• Pavilion HPE-560z: Pavilion Elite Desktop - replacement of the memory card reader

  Hello

  My memory card reader began acting after 5 years of use. It detects the media all right, I can see the list of files, but when you copy them, the LED will market and file transfer is extremely slow. I would like to replace the card reader.

  Anyone know which internal drive is insert in the case of my hpe-560z Fund? Can we all 3.5 "card reader or there are specific requirements to pay attention to the?

  Thank you.

  Hello

  Please ysé part number from the following link:

  http://PartSurfer.HP.com/search.aspx?SearchText=XX094AV

  who is 575842-001 for Memory card reader-15 IN 1, slot 4.

  You can buy through top of store or try at Amazon:

  https://www.Amazon.com/HP-575842-001-USB-15-in/DP/B004A8JIO2

  Kind regards.

• I replace 3 GB memory of 8 GB and do a 'custom' installation of Win 7 from 32 bit to 64 bit. Should I install the memory before installing Win 7 or after?

  I currently have VISTA 32 - bit OS (SP 2) on a gateway FX - 541S; Intel Core 2 Quad processor Q6600 (2.40 GHz, 1066 Hz FSB, 8 MB cache); 3072 MB 800 MHz DDR2 SDRAM and a 700 w power supply.  I have Office 2007, which is probably the 32-bit, so it seems I have to upgrade to Office 2010.

  Better do you after installing. Once installation is complete, then turn off and put in new RAM. Check the properties of the computer to see if the 8 GB is used (chances are that Windows 7 hardware reserves some of the memory). And you don't have to upgrade to 64 - bit for the Office, 32-bit applications are compatible with 64-bit Windows in most cases. Only difference is that 64-bit applications have been designed for 64-bit Windows, so performance will be better (you may not notice it however).

• Screen flashing horizontal lines after replacing the RAM

  Hello world

  Today, I replaced the original 2 2 GB RAM each with 2 other 4 GB each (Kingston) for better performance.

  I have a Macbook Pro end 2011 15 ", IOS 9.3.1.

  I opened the computer it vacuum cleaner very carefully, with the lowest power and then I removed the two RAM.

  I'm not new, the machine worked perfectly for 20 minutes, then the screen went black (electricity was running in it, I could see some lights on the bottom), I did close it with the button, turn it on and horizontal lines appeared.

  I turn again and nothing has changed. I replaced the new memory with the 'old' and I still have horizontal lines that cross the monitor (white, grey, black).

  Any idea of what is happening and how to fix it?

  Thank you in advance!

  That could be the problem:

  http://www.Apple.com/support/MacBookPro-videoissues/

• Ellitebook HP 2540p: memory upgrade

  Reclassification Elitebook 2540 P memory from 4 GB to 8 GB with (4GBx2) Kingston SODIMM DDR3 1600 MHZ 1.35v CL11 makes it unstable the laptop, it keeps restart continuously. The automatic message comes repairwill apperajust before the newspaper of the window on the screen and it will restart.

  When I replaced the previous memory it woks fine.

  Don't you think that speed (1600 MHZ) is the issue or something else? Anyone can help you.

  Hello

  Card, it supports DDR3 RAM operating at 1.5V and only 1333 MHz:

  http://WWW8.HP.com/h20195/v2/getpdf.aspx/4AA0-7783ESE.PDF?ver=1.0

  Now your new RAM does not match both. For some machines, this should be ok, but for elite machines that can be a problem

  Kind regards.

• HP xw4400 workstation memory problem

  I recently upgraded the memory on my system to 8 GB by replacing all 4 memory cards 512 MB by default with 2048MB of updates to level. However, my system properties shows only 3.25 GB of RAM. I need additional memory because the computer is running out of resources on a regular basis and I need a boost of memory. What will do for my system to use all of the 8 GB?

  Any help would be appreciated.

  Thank you

  D

  Hello navi5, if you need to use the 8GBs of memory, you must upgrade to an x 64 version of the operating system. Your processor supports the 64 x operating systems. Your video card also supports Windows 7 Aero.

  If you have decided to go with Windows 7 x 64, you must perform a new installation. You cannot upgrade directly from Windows XP. Microsoft has a way to migrate from Windows XP to Windows 7. I would say Windows 7 Pro x 64 and Windows 7 Home Premium x 64 would work as well.

  You get not only the performance of the additional memory, but Windows 7 is faster than Windows XP and Microsoft ends support for Windows XP in about a year.

  I would also check the software you use will work with any version of Windows 7 x 64.

• Upgrade memory for Portege M400

  I recently tried to upgrade my laptop Portege M400 the original 512 MB of ram to 2 GB (which seems to be possible according to the user manual.

  I tried to install the memory standard DDR2-533 (I install 2 x 1 GB). However, when I tried to reboot the computer with the new memory of the hard drive does not recognize the new memory and I had to involve someone with more expertise than me IT. After that I tried to replace the original memory in the computer the hard drive also failed to recognize that and laptop computer were to restore to factory settings before windows would load again.

  Can anyone tell me what type of memory should I install? Y at - it Toshiba specific memory that must be installed in the system? And finally, can I just pick this of any toshiba dealer?

  Thank you

  Hello

  Without much written, I can post modules compatible memory for your laptop model:
  PA3499U - 1 M 25 (Kit of memory 256 Mo DDR2-667)
  PA3511U - 1 M 51 (Kit of memory 512 MB DDR2-667)
  PA3512U-1M1G(DDR2-667 1GB Memory Kit)
  PA3513U-1M2G(DDR2-667 2GB Memory Kit)
  DDR2-533 256 MB (PA3389U - 2M 25)
  512 MB DDR2-533 PA3412U - 2 M (51)
  1 GB OF DDR2-533 (PA3411U-2M1G)

  Your laptop can handle with 4 GB RAM max. If you want to order memory simply use PAxxx part number.

  Bye and good luck!

• HP Pavilion 6653w "imminent hard drive failure! "Backup and replace. Questions.

  Hello, I have a HP Pavilion 6653w with Windows 7 Home Premium desktop computer.   It is 4 to 6 years old.  Recently, when I start it, I get a message "imminent hard disk failure!  Please save and replace as soon as possible."  I've never had to replace a hard drive before, so I have some questions:

  1 should. what type of disc do I replace - be of the same type that I have now?  (Hitachi, 1 TB).   Is there a list somewhere that shows which drives are not suitable for my computer?

  2 - is a mechanically inclined person (my husband) could do at home, or that it does not require a professional?  My husband has replaced a front memory card, we just request if it is similar to the one in trouble?

  Thank you!

  http://support.HP.com/us-en/document/c01315257

  This link will take you to a document on the withdrawal and the replacement of a hard drive on a HP or Compaq desktop computer.  If it is not identical to your case, it will be a little similar.  The point is, that it is not terribly difficult; This is something you might be able to tackle yourself, or with a friend who has some experience with computers.

  I hope this helps.

• Compaq elite 8300 sff: upgrade memory for compaq elite 8300 core i5 3570

  Hi experts,
  
  I m using compaq elite 8300 sff on win 7 x 64.
  He has already double 2 GB pc3-12800 (800 MHz). I want to spend at least 8 GB. I m thinking about buying 2 x 4 GB of the same type, is it possible to do?
  I can't find any specs for its bus speed, so what is the fastest, it can handle in case I want to replace the double memory?
  
  Thank you.

  Hello

  Yes it will work as well.

• Re: Satellite P500 - 1C7 do not wake up after adding memory

  Hello
  I replaced the original memory of 2 x 4 GB 2x2gb.

  It works fine except that the PC doesn't wake up after a break.
  I have win7 64.
  How is that possible?

  The laptop worked before adding new modules?
  If so, then the problem could be related to new modules
  In this case I recommend that you test the other modules

  I use Kingston modules has never had any problems using these memory modules.

• New memory for Satellite M105

  I have a Toshiba M105 - S3084 which has a 2G memory (2 x 1 G modules). I bought a pair of memory 2G in replacement of current memory modules. Problem (I know it sounds strange), is that I can only find a place to put 1 of the memory sticks!

  I opened the hood to memory, removed the stick 'only' present and put in its place one of the 2G modules. Could not find another module to be replaced.

  Rebooted the laptop and memory is now showing 3G of Ram and Belarc advisor shows it as:
  Slot 'M1' has 1024 MB
  Slot 'M2' has 2048 MB

  Does anyone know where the module M1 is hidding in a M105 - S3084 Toshiba Satellie laptop?

  Thank you.

  > Found the answer. A slot of memory is under the laptop as described in the user guide. The other is hidden under the keyboard.
  I think that you didn t have several portable ;) just kidding ;)

  The two s of RAM on my laptop age of 8 years were also placed under the keyboard, and as far as I know the RAM modules are placed under the keyboard on many laptops from different manufacturers.

• Bad video memory - Satellite 5200

  I have a scrambled on display problem
  a Toshiba Satellite 5200. The adapter is
  NVIDIA GeForce4 460 Go, 64 MB, integrated
  RAMDAC. A test of Micro-Scope shows a bad
  video memory. How to solve the problem
  (change the video, or only video memory card
  or is it possible to exclude a damaged part
  video memory)?

  Thank you.

  Hello

  I read about this diagnostic software and it seems that this software is operating system independent, which allows the program to directly access hardware, bypassing the DOS or Windows, for faster and more accurate troubleshooting.
  But nevertheless, I recommend you to ask for help ASP. It may also start a diagnostic test and can give you an appropriate response.

  By the way: it of not possible to replace a graphics memory or graphics card.
  The graphics card is a small chip that attaches to the motherboard. In this case, you will need to change the motherboard. Well, but before you start to replace whatever it is ask for a care service

• RAM memory

  Hello, I have the HP Pavilion dv6000 and my laptop has 3 GB of ram merory (2 GB + 1 GB), I want to replace my ram memory

  (1 GB) with memory G.skill  F2 - 5300CL5S - 2GBSK SO DIMM DDR2 667 mHz CL5... is this possible?

  Thank you

  Your model can accept 4 gigabytes of RAM. Yes the G.Skill will probably work, but you'd be 100% sure if you have tried to find another 2 gig module, like the one already in it.