Replacement of processor (Intel® Core™ i7-4510U [2.0]) of the HP Envy 15 (K002NE)

Similar Questions

• can I upgrade cpu on HP Pavilion 1052ss g6 with 2nd generation processor Intel Core i5 - 2540M?

  HelloW to all

  I own a laptop

  • PORTATIL PC HP Pavilion g6-1052ss

  Product number: LQ283EA #ABE

  It comes with the 1st generation of intel i3-M380 processor with integrated graphics HD

  I found a service manual for my pc here on hp and there are the processors listed in repair so my question is:

  can I replace my cpu with Intel Core i5 2540 M 2nd generation processor contained in the manual of maintenance on page 79

  or just I have to use other 1st generation Intel Core™ i5 - 480 M processor?

  
  Thank you

  MrrGreeN wrote:

  HelloW to all

  I own a laptop

  • PORTATIL PC HP Pavilion g6-1052ss

  Product number: LQ283EA #ABE

  It comes with the 1st generation of intel i3-M380 processor with integrated graphics HD

  I found a service manual for my pc here on hp and there are the processors listed in repair so my question is:

  can I replace my cpu with Intel Core i5 2540 M 2nd generation processor contained in the manual of maintenance on page 79

  or just I have to use other 1st generation Intel Core™ i5 - 480 M processor?

  
  Thank you

  Hello

  I'm sorry, but you cannot use the Core i5 - 2540M. You must use the processor Core i5 - 480 M. Some laptops series G6 such as ones of G6-1200 use chips from the second generation, so the manual you have is a general for all laptops to G6. The first generation Intel processors use a different socket than the second. A possible compatibility for Intel processors is when you have an Ivy Bridge chipset third generation) and you can use a Sandy Bridge CPU (2nd generation)...

• Processor Intel Core 2 Extreme QX6700 Quad - Core for dell dimension e521?

  I just ordered an Intel Core 2 Extreme QX6700 Quad-Core processor to replace my old amd athlon 64 3200 + for my dell dimension e521 BIOS (version 1.1.4).

  I just want to know if the new processor will work with dell dimension e521 system.

  my PC:

  AMD athlon 64 3200 + 2.00ghz

  6 GB of ram DDR 2

  1 to hidden

  AMD radeon HD 6450

  ...

  Thank you

  Nope.  Intel chips use different chipsets and different the SB of AMD processor sockets.  If your computer is equipped with an AMD processor you must upgrade with an AMD processor.

• How concerned I'd be on a new processor Intel Core i7 Extreme 990 X CPU to erroneous reading of sensor?

  My concern is when the CPU is idling temperature to heart #5 990 x is less than ambient temperature, i.e. 20 degrees celsius while the temperature is 25 degrees.  Also, the adjacent core #4 is at 36 degrees, which is higher than all the other four cores.

  Has anyone here with an x 990 experiences something similar, or heard about something like that?  This could be a serious flaw and I contact Intel?

  FYI, this replaces an i7 950 CPU because it is running the mid to high 90 degrees celsius when transcoding in Encore CS 5.1.

  I7 990 x transcodes: a 7 minute test clip in less than 9 minutes and not one of the cores more than 72 degrees celsius (the i7 950 has taken almost double the time).

  In the hope that you hear.

  See you soon,.

  Michael

  Michael,

  Your "low temperature" (lower than ambient) is strange. Are you by chance using a CPU cooler with Peltier technology (i.e. Cooler Master V10) who actually performs as cooling refrigerator?

  Regarding your temperature difference of 6-core core individual under OC heavy and heavy loads, I looked back to my notes from OC'ing and maximum variance temperature reached (and comparing the coolest basic playback to the hottest basic reading) varied between 8 degrees c. and as much as 13 degrees C. I can't really explain it, but it didn't really bother me either: everything seems to work very well.

  Kind regards

  Jim

• No matter what video played in my firefox always flashes. My operating system is Mac OS x 10.6.8 running on the processor intel core duo. 32-bit computer

  Whenever I watch videos on firefox, it continues to blink away. The issue is not reproducible on Safari. My MacBook works on intel core duo 32-bit with 1 GB of RAM

  Hello

  Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  1. Open the Firefox Options (Preferences on Mac or Linux) as follows:
     • In Firefox 29,0 and above, click on the menu button

       

       then select Options Preferences on Mac or Linux, or Windows.

     • In 28.0 Firefox and earlier versions, click on the Firefox orange upper-left button, then select the 'Options' button or, if there is no button up Firefox, go to tools > Options.
  2. In the window of Firefox Options (or preferences), click on the Advanced tab, and then select general.
  3. You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  4. Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  This solve your problems? Please report to us!

  Thank you.

• Windows XP 64-bit supports processors intel core i3?

  just a simple question. is there a version of windows xp 64-bit, I can download to try before you buy?  and it supports processors intel 64-bit? I am an i3 and Windows 7 4-bit, but a lot of my old games fail to run properly under him...

  Thank you

  Go to your computer manufacturer's support web site and check for Windows XP "64 Bit" drivers for your specific model number.

  If there are drivers Windows XP then download to a folder on your hard drive, burn it to a CD and then install all of them (if XP started ok), starting with the card mother/chipset, SATA, LAN, Audio, drivers, and so on.

  Impoverish suggests that you create a backup of Windows 7 Image before starting the installation of XP.

  Installing dual Boot with Windows 7 and XP
  (Read each method in this article and that fits your needs)
  http://www.SevenForums.com/tutorials/8057-dual-boot-installation-Windows-7-XP.html

  EasyBCD:
  http://NeoSmart.NET/DL.php?id=1

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Windows 7 Professional upgrade processor Intel Core i3-2330

  I have ACER / SPIRE 5749-6863 with footstool of CPU Intel Core i3-2330 WINDOWS 7 PROFESSIONAL. Operating system can be upgraded to WINDOWS 10? IF the upgrade to speed or slow my pc will be runing.

  An i3 class computer should be very able to run Windows 10 without any significant problems.

  Reported on Acer community site that this model has been upgraded successfully, but it is not on the list of the devices supported Acer. This means only that Acer themselves have not tested, given the age to be provided.

  Install a clean however known to give better results than an upgrade. If you have questions look to backup your data and completely wipe the system to reinstall Windows 10.

• Binary translation is incompatible with the long mode on this platform. Windows 7, processor intel core i5

  I install VMware Workstation 12.1.1 Player for Windows 64-bit operating systems on Lenovo intel core i5 Windows 7.

  I have a copy of VM for HP Quality Center with the VirXPSP3.vmx file and the environment.

  When I try to open the Workstation Player vmx file:

  (1) I got prompt that machine virtual seem to be an option to take possession and use

  2) after taking possession, I try to play the virtual machine, I got a prompt with "binary translation is incompatible with the long mode on this platform. Long mod will be disabled in the virtual environment and application requiring long mode does not work correctly as well. See http://vmware.com/info?id=152 for more details. »

  Link is on this page: system required to install an operating system 64-bit on a 32-bit host (1003945) client. VMware KB

  Host is definitely 64 so I'm puzzled with this is the case.

  (3) next step/guest is: "this virtual machine may have been moved or copied. I clicked on the button "I copied it".

  (4) the following message:

  Fatal error VMware Player: (mks)

  Exception 0xc0000005 (access violation) occurred.

  Log file is attached.

  Line 476 in the log file is:

  The following features of VT - x are necessary for the support of VT - x in VMware Player; However, these features are not available on this server:

  2016 06-07 T 13: 51:34.466 - 07:00 | VMX | I125: hostCpuFeatures = 0x217d

  In one of the previous installation, I did virtual Intel technology enabled in the BIOS after one of the responses of your forum. It has not removed the error.

  Just to clarify whenever I have uninstall I'm your site troubleshooting steps:

  (1) Uninstall using Add/Remove program of the program and features

  (2) run the installer with clean / change

  I do above steps as an administrator and restart after each step.

  On top I have delete the following folders:

  C:\Program Files (x 86) folder \Common Files\VMware

  File C:\ProgramData\VMware

  File C:\Users\Ivana\AppData\Local\VMware

  Files C:\Users\Ivana\AppData\Local\CrashDumps\vmware-vmx.exe.*.dmp

  File C:\Users\Ivana\AppData\Local\Temp\vmware-Ivana

  File C:\Users\Ivana\AppData\Roaming\VMware

  And delete the folder with the Virtual Machine for HP Quality Center.

  Do you know how can I fix a fatal error (mks)?

  The same installation works fine on HP with Windows 7, i.e. copy of VM for HP Quality Center is ok.

  Thanks in advance for your help.

  Usually, this is caused by outdated or incompatible graphics drivers on your host.  I expect that the latest drivers for your integrated Intel HD Graphics 4000 would be probably already delivered through Windows Update, however.  Could be interesting to see if there is an optional update in your Windows Update list to get a new graphics driver.

  Otherwise, you can try the problem by disabling 3D graphic acceleration: from the VM menu, select settings..., and then in the list of material , choose display.  Clear (uncheck) the box 3D graphic acceleration .

  I hope this helps!

  --

  Darius

• HP Compaq 8510p: is it possible to update from the Intel Core 2 Duo T8300 CPU on the HP Compaq 8510p to a T9600

  Hi all

  I want to upgrade my HP Compaq 8510p.

  I have an Intel Core 2 Duo T8300 installed. It's pretty fast, but I would need to increase the RAM memory. Unfurtunately, it only supports 3 GB. I searched the web and found the T9600. Similarly, the T9700 and the Q9100 have a the same base (P) and have been suggested here: http://www.cpu-upgrade.com/CPUs/Intel/Core_2_Duo_Mobile/T8300 _ (Socket_P) .html

  On the other hand, I've read, the Quad may not be supported by the motherboard, which im my case seems to be called 30CS KBC Version 71.36

  My BIOS version is the Ver.F.15 of 68MVD

  I would be grateful for any help regarding this issue.

  Thank you.

  Alex

  Here is the Service Manual that answers all the questions:

  Your manual

  See p. 24. Top of page processor listed is a T9500. Quad is not supported. Other processors dual-core as a T9900 might work, but you're better off to take the manual is correct.

  The laptop can support that 3 GB RAM because you are not running a 32 bit OS. It is capable of up to 8 GB, but it uses DDR2 and 8 GB of DDR2 memory is very expensive; well over US $100.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• to upgrade the bios on an hp dv4t-1400 with processor intel what file do you use in the sp48847

  I downloaded the HP website sp48847 and extract the files, but I don't know who. FD to use file.

  I have a 1400 dv4t with P7350 intel processor and bios are corrupt. It does not Flash by using the process of disconnecting the power remove the battery hold down power key B pluging and windows by pressing the power button / stop then release the keys B, button / stop and windows. It doesn't detect usb drive with any file flash bios on this subject, and I rename the file in 30F7. BIN.  At this point, I have to remove bios chip and flash with spi Flash bios I have. My only problem is that I don't know who. FD to use file.  I would be grateful if any body can help to know what file to use or a better idea altogether.

  I was told that the file 30F7F66D. FD is for 30F7F66U and AMD processor. FD is for processor intel, but I can't be sure since I have to remove and replace. I also use another computer to download these files and load on the wheel.   Dv4t-1400 does not start.

  Thanks in advance

  Dave

  Thanks again HaggisCat for more information on this problem. After a lot of research

  I found a thread that has answered my question, the 30F7F66D file. FD is for discrete graphics and the 30F7F66U.fd file for

  integrated graphics (UMA).  Just thought I would give you insight in the case where you never came across this problem.

  Thanks again for your response.

• HP Pavilion a6519fh: processor Intel Core 2 duo E6700 cpu upgrade

  Hi, I have an a6519fh Pc which came with a Pentium dual core E2180, I want to know if a Conroe E6700 is compatible with this PC, as I read that some motherboards are not that mine is an IPIBL-LB (Benicia). Thanks for any advice or help :))

  Hello:

  Here is the link to the motherboard for your PC card.

  http://support.HP.com/us-en/product/HP-Pavilion-A6000-desktop-PC-series/3733085/model/3752853/document/c01324212/

  Under the section the processor upgrade, it appears that the Conroe E6700 is supported.

  Core 2 Duo E6x00 (C) until E6700 C = Conroe.

  You can also see the other processors supported as the E8xxx Wolfdale.

• MacBook Pro 10.10.5 OSX Yosemite 2GHx processor intel core

  Tried to clean my boot drive for more space, UsingClean Genius Pro and more following the manual directions relative to the removal of unwanted files.  My hard drive now sits on my desk and I want to remove it

  Finder > Preferences > General > hard drive > deselect which

• HP g62-355dx & dell processor intel core: HELP PLEASE! Ive been hacked, I have windows 7 hp & dell laptop

  I've tried everything.  HES got in all the emails 2 computers all social media. How can I get this off of my computer? I delete stuff and he comes back, he has a code on something it redistributes and copy the password.  Im going crazy I can't even conduct my business because of this! Help, please. im running an evaluation of the ore system in the dell right now you can clearly see 2 cpu...

  @Js33

  Start in safe mode with internet connection.

  Then download and run Combofix.

  http://www.bleepingcomputer.com/download/ComboFix/

  REO

• HP ProBook 470 G2 portable PC: upgrade Windows 10 for Intel core i7 4510U, BOF 64 - bit Windows 8.1

  
  

  Katja123 wrote:
  

  Thanks Pepe999, I've already updated.

  You're welcome and congratulations!

• processor intel core of HP pavilion P6-2142: want to do recovery USB for HP Pavilion...

  trying to make a USB... says recovery space is 15.5 G... I tried a 16G and 32G USB and the * next button does not open for the task

  Understand that the factory, which is what you get when you use the HP recovery media, erase the drive, deleting all data, settings, and applications.  He returned to the PC of the State is was in when you first unboxed it.

  If that's what you want, then you need to order recovery HP media.  It is a DVD and CD set that will erase the hard drive (removing all data, applications and settings, reinstall the original OS, drivers and utilities for HP.
  
  You can look online for recovery from the paged media related: http://support.hp.com/us-en/drivers
  
  Once there, enter your product name or number. On your software page and download the drivers, select your operating system and version. Click on "Update".  If the HP recovery support is available for your computer, down near the bottom of the page, you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entty and click on order to press for more details.
  
  Or, if you prefer, you can do the same by contacting HP Customer Service:
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html