Replacement of the card network without WIRE of E430 (3254)
I use E430 (3254-B62) in South Korea and it is so beautiful product for me.
But the basic WIFI card is crap, you know. It's 1 x 1 model of Broadcom, so max connect bandwidth is too low.
So I decided to replace in Intel 6250 Wimax (60Y3195) because it is listed in the E430 system list.
And I bought it on Ebay by searching with his of FRU ID '60Y3195 '.
At first, I was sure that he will be working perfectly on E430 but I got the error message 1802 on BIOS.
(1802: unauthorized network card is installed...)
Why can I not use product mentioned the correct FRU ID that appears on the official Lenovo service document?
Let me know on this subject.
Good day and welcome to the community.
Has the card that you have installed a Lenovo FRU sticker on it? If this isn't the case, then it is probably the 6250 generic version, which will throw the error 1802 , as you describe. Many items sold on eBay will list the FRU #, but will be the generic card, rather than on the specific to OEM card.
If this is your case, I would say that ask you to return the card and shop for a genuine FRU part.
Kind regards.
Tags: ThinkPad Notebooks
Similar Questions
-
Windows 7 keeps changing home network to the public network without asking for confirmation, this prevents me to access the internet
Hi douglas wilson,.
Welcome to the Microsoft Answers site!
Since when are you facing this problem?
We need additional information to help you better.
Make sure that you save the settings after clicking on homepage or work profile in the network profiles.
Strengthen the security of your computer and your network:
Identify and resolve home network problems:
http://Windows.Microsoft.com/en-us/Windows7/identify-and-resolve-home-network-problems
Open network problem:
http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters
Kind regards
Amal-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Windows 7 continues to change network to the Public network without asking confirmation
Windows 7 keeps changing home network to the Public network without asking for confirmation. I used the troubleshooter and it has not shown "no valid ip configuration". I reinstalled the driver but it does not work. What should I do?
Hello
All computers on the network are installed with Windows 7.
You can try the steps in this article and check. -
Satellite Pro L450 - network without WIRE Realtek RTL8191SE adapter: limited access
Hello
Hoping you can help me with my problem with the wifi connection.
OS: Windows 7
Wireless adapter: Realtek RTL8191SE Wireless LAN adapter
Laptop: Toshiba Satellite Pro L450
Wireless router/modem: CiscoWhen I turn on the laptop the wifi connection can work for 10-30 minutes, but then the down network access but remains connected with limited access.
Then restart the connection will have access limited the offset.
In addition, sometimes the available wireless connections do not show in the networks available on the windows toolbar.
When you use the Ethernet cable connected to my router there is no problem.I have searched the forums for help on this and have already tried without success, the following
Updated driver: issue date may 2010
Verify that TCP/IP has been installed to automatically obtain the IP and DNS
Disabled firewall
Reset the modem
Countless reboots of the modem and the laptopWireless modem/router works perfectly as I can connect with other devices and laptops.
Is it a problem that we see on a regular basis with this combination of laptop card / without wire/operating system?
Would appreciate any guidance you can give me as it becomes very frustrating.Thank you
Kieran
Hello
I see you didn't check the BIOS!
Here you can compare the BIOS with the version update available.
If you have an older version of the BIOS on the laptop, then an update would be recommended.
Once the update to the BIOS it defined it please to the default settings (press BIOS F9 and save)!By the way:
http://APS2.toshiba-tro.de/WLAN/?page=downloads
Here you can find the latest WLan driver
It s v.2015.1.0427.2010 at the momentPS: I hope that Windows 7 is up to date...
-
Replacement of the corporate network switches how ESX and VM will react?
We replace all our switches in current network with new gear. All our ESX network connections are redundant (console, vmotion and virtual machine) with each connection associated with a different switch (for example the virtual machine NIC is connected to different switches and the same for other groups of ports). I was wondering what will happen when migrate us to the new switches. We intend to make this port a port at a time. My guess is that when we have the first virtual machine network cable and move again preconfigured port switch all the VMS on this NETWORK adapter will switch to the other NETWORK adapter as if it was a failure. The migrated Server NETWORK card will be auto-negotiation with the new port and become availble for use but VM will not request for load balancing between the two network cards. We then will at some point to move the other virtual machine from the old network card switch to a new switch and the VM are switched to the new other switch port and as the first card NETWORK occurs autonegotiation and the nic will become available. But how do I get the network traffic balancing across both connections of NIC's virtual machine? I understand that load balancing of virtual machine through the NETWORK interface only to the market and vmotions card - is this true and if so how can I force a reload balance or even manually load balance... Thank you
Failback only works when you run active / standby NIC. If you are running active-active, you can set the host mode maint, let it drain and then leave the mode maint to allow virtual machines to come back and live on some Teddy they land on.
With respect to the passage of the switch the riskier part is to make sure that you have all the VLAN defined on the 'new' switch and that there is a layer 3 path to the front door of this switch. When you migrate the first server I would put in mode now, put some DRS in manual mode and then make the transition. Then a vMotion machine virtual not essential (or 1 VM for each VIRTUAL local area network) on to this host to make sure that the installer of L2 and L3 works correctly. Make sure that the field of L2 on the old switches can talk to the L2 area on the new switches.
Ben
-
How to install card PCI-8431 in replacement of the card PCI-485/8?
I have a computer with an old card PCI-485/8 I want to replace it with a new card PCI-8431. SERIES OR in the computer is v.3.4 and v.3.5 came with the PCI-8431. Of course I should put to date OR SERIAL. However, my concern is what happens when the system detects the new card? The replacement is as simple as changing the cards or will there be a problem with the ASRL how numbers which they are currently Setup?
Please indicate the appropriate measures to update the computer.
Thank you
Dave
Thank you Sara for your answer. It will take some time before I can come back to this project. I'll let you know if I have other questions.
Thank you
Dave
-
I tried to change the speed of the network card and who does not. So I am not able to connect now by customer. It is a dell T410 server and I don't know how I can activate the card again
Hi ALPValence,
You need to change back to its original console setting. Take a look at this KB on how to do it.
It will be useful.
Concerning
Franck
-
I wish I could share the bookmarks direct (from the bookmarks toolbar) - that is, the laptop allows to select bookmarks in the toolbar PC.
the computer laptop and PC are on the same network and network share could be activated if necessary
Thank you very much
DanI thank you, trying to install them until now, have some difficulty with the 2nd unit but I'll see how I go first
-
network without wire - a unauthorized computer appears on my unsecured network
Hello I was online connection using an unsecure Linksys wireless network. I noticed in my network, I see another computer in my network named julio-pc NOW I have a laptop and have no other pc network to my laptop name is maryann, my question is can the host of the network unsecured wireless I use to open an online session discovered my files from the laptop documents, images, the host has access to view my personal files and track the sites I use when connected to the wireless network? Please answer I'm worried about my computer laptop files my safety. I do not know the host must be a neighbor and not gave everyone permission to connect to or to add any other pc on my network! Why therefore appear JULIO-PC in my network and when I click on JULIO-PC for information on windows says canoe user locate the user I was spread connections wireless secure 2 months and recently noticed this unknown user JULIO-PC in my network. ??? WHAT should I do? should I stop usin da unsecured WiFi connection? Please give me some information about my problem.
Thank you very much
Hello I was online connection using an unsecure Linksys wireless network. I noticed in my network, I see another computer in my network named julio-pc NOW I have a laptop and have no other pc network to my laptop name is maryann, my question is can the host of the network unsecured wireless I use to open an online session discovered my files from the laptop documents, images, the host has access to view my personal files and track the sites I use when connected to the wireless network? Please answer I'm worried about my computer laptop files my safety. I do not know the host must be a neighbor and not gave everyone permission to connect to or to add any other pc on my network! Why therefore appear JULIO-PC in my network and when I click on JULIO-PC for information on windows says canoe user locate the user I was spread connections wireless secure 2 months and recently noticed this unknown user JULIO-PC in my network. ??? WHAT should I do? should I stop usin da unsecured WiFi connection? Please give me some information about my problem.
Thank you very much
Hey julio-pc
in that time you ask only trouble using an unsecured network
you're giving your neighbor a free ride on the Net and you leaving open for data theft
You must configure WPA or WPA2 security for your router
read what is WPA
http://en.Wikipedia.org/wiki/Wi-Fi_Protected_Access
use WPA WEP security preference
read only one method of how to configure a linksys wireless router
http://www.ehow.com/how_2091718_set-up-Linksys-wireless-router.html
or go to the linksys website and look for information on your wireless router model list exactly how to set up a secure network
or ask in their forums
http://www.linksysbycisco.com/UK/en/support
Walter, the time zone traveller
-
How can I search for and work in the card module without losing my selection
I'm going through my old photographs which predate the geolocation and adding my best guess as to their sites via the card module, but I'm frustrated.
My biggest fear is selections. In the library module, I look at and find a set of photographs that were taken at the same place and I select them. I then go to the card module and move found, sometimes look, the place where the photographs were taken. Now I'll return to drop the selection in the map and... OH NO.... There is no selection. Double angst is I click back in the library and I scrolled to the beginning of my group of photographs.
Deselect photos is the biggest mistake of the UI that Lightroom is making in this sequence. I wonder if there is something I can do to avoid it being may have a second method of a quick temporary group of photographs.
The other related question I have, is if someone has a suggestion of how to mark these photos as the type of GPS data. for example, it could come from the camera, it could come through a trace log, or maybe it's just my best guess. Maybe it is already possible to determine.
When you find the photos you want to taken in one place, select them, then put them in a quick Collection (press B)
Select the quick Collection, then go to the card with the film Module running. You will then be able to work ONLY with this series of photos that are taken in the same place
-
Activation of the AES encryption on the network without WIRE of M30x-130 adapter
How to enable encryption of data Advanced Encryption Standard (AES) on the WLAN of my laptop Satellite M30X-130 adapter? The LOCAL (internal) network card is an Intel PRO/Wireless 2200BG driver version is 8.0.12.20000 driver date: 08/03/2004 OS: Windows XP home SP2 according to TOSHIBA Satellite M30X user manual, this should be possible. My wireless router and the wireless in my desktop PC Adapter use AES data encryption and WPA - PSK network authentication. I can activate authentication network WPA - PSK on the laptop, but I can't select (only TKIP) AES data encryption.
Kind regards
Ekim
There are new drivers available for the Intel WiFi card on the Intel Web site:
http://support.Intel.com/support/wireless/WLAN/sb/CS-010623.htm
If you install them, also install the tool Intel PROSet / Wireless, has its much better than the Wireless Zero Configuration tool Windows XP SP2 and it also has an option for AES data encryption.
-
Can't see the networks without wire in Dell Inspiron
I have just moved house (previously in the United Kingdom, in Australia) and now I can't get my Dell Inspiron 1525 to find (Vista 31 bits operating system) wireless networks. Under network and sharing Center, if I click on connect to a network or setting up a connection or network, nothing happens. Similarly, under Manage Wireless Networks if I select add nothing happens. However, if I select the Dell Wireless WLAN Card Utility I see my network wireless on the Site tab. Also, I can see and connect to the network wirelessly to other devices (for example the iTouch).
Hi dellUser_742
Please refer to the below links and check if the steps to help you resolve the issue.
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks
http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network
I hope this helps.
-
I have a new R830-1GZ Satellite with Windows 7 and a (much) older Portege M300 - all have two versions of Radar on them.
However, while the old machine display correctly anywhere wireless and signal forces - even when there are multiple places with the same SSID - I use Powerline Extenders to extend coverage, the new machine with the last RADAR doesn't seem to be able to cope with these multiple identical wireless spots and fails to show more than one at a time - and then reliably.
I should add that both machines work quite well in fact using the same SSID points connecting to the stronger.
Is there a utility round way this or another that correctly displays it available different SSID and strength.
Thank you very much
Bill
> Is there a utility round way this or another that correctly displays it available different SSID and strength?
As far as I know there is no other Toshiba utility that could manage wireless networks and display devices Bluetooth as ConfigFree don't.
I found some useful Q / A ConfigFree regarding:
[ConfigFree: answers Questions &: http://www.toshiba.eu/innovation/solution_content_article.jsp?z=42&SOLUTION_ID=Conf igFree_QandA]Look also in Toshiba's technical knowledge base and search for Configfree for useful documents.
http://www.Toshiba.EU/innovation/generic/TKB_SUPPORT/ -
Unable to connect to the network without wire stuck in airplane mode
Hello
I have a computer laptop inspiron 15r with Windows 8. My most recent problem is surface today. Suddenly my laptop kept disconnecting my wireless connection and turn on airplane mode. Finally, it is stuck in airplane mode and I am unable to connect wireless. I have a Dell 1705 Wireless card. I tried everything, including restoring the default settings. It also shows that my Ethernet connection is disconnected. It's not since I have my Tablet connect correctly. This all started when I tried to check the updates of windows. Any help is appreciated. I have never known as many problems with a computer. It seems that I'm fixing always something.
bela1950,
In addition to what Jim said...
Airplane mode - enable or disable in Windows 8
Rick
-
What key is used to put on the network without wire on the laptop?
original title: network programs network networking Internet Web site Site Web Web Site URL
WHICH KEY ON MY LAP TOP TUNS O WIRELESS NET WORK
Hello
What is the number and the model of the computer?
Many laptops have a switch wireless on the front or side of the computer. Find a switch on your computer. If you have a switch, make sure that it is enabled. Some computers also use a combination of function keys to switch on or off. Check the documentation that came with your computer for details about the location of the wireless switch.
Maybe you are looking for
-
Difficulty to access the updates and downloads with very slow wifi ("country"). Is it possible that I can download some updates and new programs using my MaBbook Pro (retina) on a public site in the city and transfer them on my iMac which is too hea
-
I can't install the mobile dongle T on Windows Vista.
Hello My problem is simple, I brought a t-moble dongle the other day, but it won't let me install the software on my computer, when I insert the dongle the box blinks for barly 1 second and then goes again and nothing is displayed on the section 'my
-
I need help regarding linksys rv042.
I have linksys rv042. I want to connect it to the netgear modem. Modem will use ppoe and the router will use the static ip address from the ISP. I try this scenario but unable to connect to the internet. When I connect the modem directly to my pc the
-
Hibernate does not work under vista
My PC won't come back into hibernation automatically. Can someone tell me how to set power options to please? Thank you
-
Lolipop 8 7840 place access to storage with exFAT file system
I plugged an external drive with USB OTG cable, the Tablet detects it but says it is empty or use the unknown file system. Is it possible to access the data on the formatted exFAT storage?