replacement profecional xp with a new xp home edition problem

Hi and thanks,

I was trying to replace a trouble profecional xp faced with a new windows home addition.i could ' t complete the installation because I couldn't connect to the internet.my at first thought that wat the modem provided by time warner was not good.after a call and a few tries, I was informed that in the prosess change XP Home addition that a driver was missing(net_adpter).how re install the missing driver? Thanks in advance.

In fact, I spent about 2 hours on the phone with a Dell Ghent and we were able to load the missing drivers on my wifes lap top and transfer them to my gx280. All is well now. Thanks for your concern. Pat Daly

Tags: Windows

Similar Questions

  • I need to replace a motherboard with a new another brand, what files or drivers that I need to delete not close up with problems starting in windows 7 pro oem

    I need to replace a motherboard with a new another brand, what files or drivers that I need to delete not close up with problems starting in windows 7 pro oem current motherboard works but is old and has problems with heat. Not worried about having to re-record software am just worried starting problems

    Friday, October 19, 2012 19:03:30 + 0000, * address email is removed from the privacy * wrote:

    I need to replace a motherboard with a new another brand, what files or drivers that I need to delete not close up with problems starting in windows 7 pro oem current motherboard works but is old and has problems with heat. Not worried about having to re-record software am just worried starting problems

    Two points:

    1. it is unlikely that your current installation would work if
    you have changed motherboards. You need to reinstall itself.

    2 but you cannot use your current copy of Windows if you change
    motherboards, not even if reinstall you it cleanly. The largest
    disadvantage of an OEM version, is that its license it binds permanently
    the first computer, it is installed on and Microsoft believes that
    If you change the motherboards, another computer. It can never
    legally be moved to another computer, sold or transferred (except with)
    the original computer). If the computer dies or is stolen, your
    license dies with him.

    Ken Blake, Microsoft MVP

  • I have a laptop OEM with a Windows XP Home Edition (English language). I need to reinstall, but disk is damage. Where can I find the product so that I can download and reinstall?

    I have a laptop OEM with a Windows XP Home Edition (English language). I need to reinstall, but disk is damage. Where can I find the product so that I can download and reinstall?

    Hello

    Contact the manufacturer of your laptop and see if they have a disc of recovery of your brand and the portable model.

    "How to replace Microsoft software or hardware, order service packs and replace product manuals.

    http://support.Microsoft.com/kb/326246

    See you soon.

  • Tecra 9000 - error message with Windows XP SP3 home edition

    Hello

    I have a Tecra 9000 in very good condition, until yesterday, I have no problem!
    After updating my Windows XP service pack 2 on the "service pack 3", everything works fine but when I press the button 'TOSHIBA controls' and 'mouse' for setting, Windows error message occure: "run a dll as an app"!

    Even if I go to "Start" and "Control Panel" and press the mouse, after setting close icon, or just simply do nothing (cancel), the same message! I did not notice any other problem with the TOSHIBA utility!
    My driver for mouse is "Logitech mouse ware, 9.40! Can you help me?

    This oldie works well with Windows XP SP2 home edition and in my opinion you should use without SP3. Try to remove the SP3, and I hope that everything will work properly again. Problem is that the old tools and utilities designed for Toshiba probably aren't tested and updated to SP3.

    I have more Satellite M70 and use sill with SP3. I don't want to risk anything and have problems.

  • Lexmark Z705 printer does not not with my Dell XP Home Edition.

    Original title: help with printer

    I have a Lexmark Z705 printer.  He worked with my Dell XP Home Edition, but now it will not print.  It seems that I need gyo8olo maxtor.  I lost my

    Restore disk.  Where I can down load this?

    Hello
    1 did you change on your computer before this problem?
    2. you receive an error message?
    Follow the suggestions and then check out.
    Method 1

    You can install the drivers from the link below. http://support.Lexmark.com/index?locale=en&ProductCode=LEXMARK_Z705&UserLocale=en_US&segment=download&OS=WINDOWS_XP&page=downloadsList&oslocale=en_US

    Method 2
    You can follow the procedure in the article.
    Resources for the resolution of the printer in Windows XP problems
    http://support.Microsoft.com/kb/308028/en-us

    Method 3
    You can follow the procedure in the article.
    Printer in Windows problems
    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  • How can I send and receive faxes via a pc with a windows XP Home Edition

    I want to know how can I use the pc-windows xp home edition to send and receive faxes? Thank you

    Please send me an email to * address email is removed from the privacy *.

    First of all you need a Fax application and then you need an analog phone line - unless you use a Web-to-Fax service... If you find my answer helpful, please click the button "Vote as helpful"! Thank you! My Blog

  • Its Windows XP Home Edition problem

    I am running Windows XP Home Edition, map mother MSI V-Class with integrated Realtek HD Audio but do not get sounds from my computer speakers only when an audio source connected to the outside is used.  All the sounds of the internal computer work fine.  All the devices work properly the Device Manager indicates. No yellow exclamation point or a red X. s all compatible devices.  What is left to do to get an external audio sound? What I'm trying to do is prepare to record LPs on CD.  I'm connecting a phono via a preamplifier and run a cable to Y of the band of the output sockets on the blue line in the port behind my computer.  No sound is emitted from the computer speakers when turned on. I have connected the speakers to the amplifier and got her so I know that the unit is working properly. Then I tried to connect a tape recorder directly in the blue line in the port. Again not sound.  I get a balloon saying that I just plugged a device.   All volume controls are located at halfway.  What could be left to do to play music outside the computer itself and to hear the sounds of computer speakers that work well in the case?

    You have me interested in another tactic on this issue.  What happens if my computer taken are not what they seem?  I went the "input jacks' for 'taken them out' and voila, the sound from an external source! They are wired exactly backward. Line is actually the line outside and vice versa!  You helped me, if inadvertently, to check something I have acquired.  And for that I am very grateful. Thank you very much!

  • updates for windows 7 Home Edition problems

    I have a HP Pavilion computer processor AMD Sempron 140 2.70 GHZ, 3.00 GB, usable 2.75 GB installed memory. Type of system 64-bit operating system. Windows 7 Home Edition, service pack 1.

    My problem began two months ago, every time that microsoft windows does an automatic update, and then restarts, my screen goes gray and I have to close it using the power button. After doing that it would hire up to my regular office, yesterday it downloaded and got the gray screen, tried to make a closed hard but when he started to log on again it wouldn't start. I had to log on in safe mode with internet connection. They suggested to do a restore, I did that 3 times, still would not start upward using normal startup. He then began using the repair tool on its own and after 45 minutes, I was able to log on and come back to my office. Now I have disabled the automatic update of windows and am afraid to install updates at all. Y at - it something I can do what I can to keep updated on my updates.

    Thanks for your help,

    Hello Jackie,.

    Thanks for posting your question on the Forums of community of Microsoft.

    According to the description, I see that after the automatic updates of Windows you computer gives the gray screen.

    To better assist you, please answer these questions:

    1. do you get an error message?

    2. What is the item number of kb of the update you have installed?

    I suggest you follow the provided methods to solve the problem:

    Method 1: run the clean boot:

    Perform a clean boot to determine if any 3rd party service is causing the issue:

    http://support.Microsoft.com/kb/929135

    Note: After performing the steps to clean boot troubleshooting, follow step 3 from the link to start the computer to Normal startup mode.

     

    Method 2:

    Temporarily disable the security software and check if it helps.

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

    Note: Try to install the updates after these two methods, restart the computer and verify if you are able to install the updates.

    Reference:

    Change how Windows installs or notifies you of updates

    http://Windows.Microsoft.com/en-in/Windows7/change-how-Windows-installs-or-notifies-you-about-updates

    For the related issue of Windows or anything related to the Windows operating system, do not hesitate to contact us and we will be happy to help you.

  • My printer HP LaserJet 1536dnf printer prints black pages after replacing the toner with a new one!

    I changed the toner cartridge for my printer HP LaserJet 1536dnf with a genuine HP toner cartridge and now it's printing the pages in black.  Any suggestions on how to fix this?

    Thank you!

    Hi @Beaglemom49779,.

    I see by your post that you have replaced the toner and now get all black pages. I can help you with this.

    Have you had the same problem with the printer before replacing the toner?

    It could be a hardware or with the printer fuser problem.

    If the problem started just after replacing the toner then most likely, the toner.

    Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector)

    Number one cause of problems with toner.

    Check if the drum unit for damage:

    1. remove the cartridge of toner product and check that the tape has been removed.
    2. check the memory chip for damage.
    3 examine the surface of the imaging drum on the bottom of the toner cartridge.
    CAUTION: Do not touch the roller (Imaging drum) on the bottom of the cartridge.

    His fingerprints on the imaging drum can cause print quality problems.
    4. If you see the scratches, fingerprints, black on the drum, or any other damage on the imaging drum, replace toner.
    5. If the imaging drum does not appear to be damaged, rock the toner cartridge gently several times and reinstall it. Print a few pages to see if the problem is resolved.

    Please call our technical support if the there is a problem with the toner and you learn about a replacement, to the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Contact HP.

    Good day!
    Thank you.

  • TDMS replace specific fields with the new string data

    Hello

    Wonder if someone could advise a more easy, more clean solution or I may end up making a big mess on my diagram!

    I use DaqmxConfigureLogging.vi to write data in the .tdms and this file everything works. Unfortunately, this vi affects physical names such as Dev1/ai0 channel names in Journal of root and group of tdms files.

    I would like to read individual fields where they are written and replace them with the names of channel. The location of these channel names is fixed on the tdms file.  However, I noticed using file i/o functions, such as file open/close/set position could not work, because these files do not seem to recognize the .tdms file. And it is not all fields tdms functions you want the value of the positions on sheets of root/channel files tdms and read fields desired as string data.

    Any suggestions? I can miss something quite simple!

    crossrulz wrote:

    k waris wrote:

    "In fact, it uses some names you give the channels and groups.

    I use Dev1 / ai0:15 connect all 16 channels. Unfortunately if using 'name to assign' entry will not do the job in my case!

    Of course, it will be.  Use a loop FOR with DAQmx channel create to create each channel and give them a name.

    Just to clarify what I meant here...

  • just replaced my key with a new one microsoft Board, and I'm unable to type (n) in Spanish! It worked on my old key board.

    I tried alt + 0241

    Most often when a device is not it's because of a driver.  Try reinstalling your.

    It works for win 7 & 8

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

    http://captaindbg.com/how-to-update-drivers-on-Windows-7/

    We are not in a position to help unless you help by providing us with as much information as possible.

    Suggestions for asking for help on a site.

    http://support.Microsoft.com/kb/555375

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/what-information-to-post-in-the-Windows-Update/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

  • Office Jet 6500 E710n-z will not print black even just replace the cartridge with a new one.

    This is the 3rd time having problems on "black" even printing ink isn't empty (but the level is low, like a quarter left).  In the previous cases, I replaced the cartridge and the problem resolved.

    The 2nd time was last week.  After I changed the cartridge, it worked (for only 1 week) and the problem is back.  As the ink is full this time and it worked fine when I just changed it, I suspect it is the problem of my printer instead of the cartridge.

    I did clean the print head and align the print heads, but the problem persists.  Please advice solution.  Thank you!

    I hope that the printhead has no need replace. I would like to look at this document on faulty production for your printer model.  I know some steps here mentioned you already make. Please just read / ignore those and try the ones you have not yet completed.  It presents various ways to clean the print head; If you have just done the cleaning of the box tools, I'd defiantly that manual. It also has a ride to make sure that the product firmware is up-to-date.  Here is the link: http://support.hp.com/us-en/document/c02455482

    I hope this helps.

  • I replaced my XP with a new Windows 8.  How we install Elements 8, I used on the old PC, please

    I bought a new PC of Windows 8 and want to get 8 elements of my old XP installed on it.  I bought online and still have the code setup but don't know how to install it.

    No harm in trying if you obtained your serial number of 8 elements.

    Download the demo version of http://prodesigntools.com/direct-download-links-for-lightroom-3-and-photoshop-elements-8.h tml

    Follow the Instructions of the very Important on this page first before you click on the download link.

    Enter your serial number to license on your computer.

  • With removal of Vista Home Premium problems

    Hi, I recently had problems with my laptop, with the result a new hard drive being mounted.  In the case the store installed an OEM Vista Home Premium package.  I would like to remove it and revert to that Microsoft works 8.5, which came with the original computer.

    I have run the program uninstall and apparently removed the Vista package (according to the list of programs); the only problem is that when I turn on the computer, it is still active.  Can someone tell me how to remove it and make works 8.5 system by default please?   Thank you.

    Your best option is to take it back to the repair shop and have them fix it as you wish.

    See you soon.

    Mick Murphy - Microsoft partner

  • Error BIOS acpi with Windows XP SP2 home edition on model Sat Pro 4310

    Hello

    I get this message in my event logs
    Is there a way (update, etc.) to come around him

    Thanks in advance

    William

    Hello

    Well, I think that it s a problem with Windows Xp. After a lengthy investigation, I found this information on the official site of Microsoft.

    http://support.Microsoft.com/kb/q283649/

    This is because the new ACPI specifications are not compatible with the BIOS.
    Please check this:
    http://www.Microsoft.com/hwdev/onnow/BIOSAML.htm

    It seems that you must update your BIOS to fix this.

    Good bye

Maybe you are looking for

  • Enter your administrator password or power on password

    Unfortunately I do not have the product serial code, or even know what OS this laptop works, because he is the child of my cousin. I was invited to take a look, but cannot go beyond a command prompt for a "password administrator or of the power on pa

  • Printing multiple pages to a TIFF file multiple using Windows Photo Viewer

    Original title: printing problem with a tiff file Hi guys How can I print 2 or 3 leaves only out of 68 pages in TIFF file when I open with 'Window Photo viewer'? When press "print", it appear just 'paper size', 'quality' and 'paper' only! Please kind

  • Download photos from my phone black berry

    How can I transfer video from my black Berry on my pc

  • How can I change the order of my email accounts in the main window?

    Hello I use windows live mail with a bunch of e-mail accounts different and for some reason that I can't understand how to display in the order I want. I tried to change their names, but it has no effect. I tried to figure this out for a while and it

  • BIOS password protected

    I'm trying to change the boot order in the BIOS (HP envy m6 with AMD A8 and Win8.1), but asks me a password.  It does not accept the passwords I've used on this computer.  After 3 attempts I get "System disabled" and a number generated from seemingly