Replacement ram DX 2200 problem.


Hello

I'm afraid that's not quite as simple. For others the memory provided by HP, you will need to use memory modules which are guaranteed to be compatible by the manufacturer of memory or the seller. The reason that I say that is because that the BIOS limited which makes if. As the owner of the PC dx2200, you cannot change the primary and timings secondary memory to accommodate other approved memory modules. If you've already seen the BIOS of the motherboard for a fan, you'll know exactly wat I mean. Purchase guaranteed compatible memory modules allows the manufacturer of memory and/or vendorrs do this work and takes the risk of $$$ out of your hands.

the following image is the part number for the kingston memory modules that are guaranteed compatible, but unfortunately is not supprted. This is because your PC is a discontinued model. If you can find the part number indicated it should work.

Tags: HP Desktops

Similar Questions

  • How to replace RAM on Tecra M9?

    Hello

    Anyone can help explain how to replace RAM on my Tecra M9L - 12K. Returning more I can see the most obvious place where the RAM would be installed but there is only 1 slot SODIMM here. The other is where and how can I access this? Sorry if this is a thread answered elsewhere, but I can't find the answer - maybe you could move me if this is the case?

    Help gratefully received

    Please download the user manuals of the Toshiba support page under http://eu.computers.toshiba-europe.com > Support and downloads and see page 59. You will find detailed how explanations do.

  • Pavilion G6t-2200: replacement for the hard drive g6t-2200 problem

    Original hard drive failed completely. Have inserted 3 different drives in this laptop and BIOS doesn't recognise it, even a brand new 500 GB drive.

    Any suggestions on how to get this pc to recognize a replacement disk would be appreciated. I buy HP recovery CD and they do not work on it because of this problem.

    PS the pc was working fine until the original disc is dead so I suspect not the motherboard.

    Hey @DaveTully,

    See if the BIOS is set on and switch to whatever that is not defined on the secure boot or inheritance.

    Here is a guide on how to do it: Computers HP - Secure Boot (Windows 8)

    Please hold me.

    By pressing the Thumbs Up button below, you can always say thank you!

    See you soon.

  • Novice replacement RAM. Can I do this?

    Hi, I've never tampered with any PC before, much less an iMac, but I want to increase the RAM in my iMac 2010 mid - I currently installed 2 x 2 GB strips, and now it is a little on the slow side. It seems pretty easy to make even for a novice like me. Would it not be better to:

    Replace the modules of 2 x 2 GB with 2 x 8 GB modules

    Replace the modules of 2 x 2 GB by 4 x 4 GB modules

    I've read about problems with iMacs does not begin after instillation so I'm a little worried to do this, it should be fine right? Can Apple if something is wrong?

    Thank you.

    Yes you can do it. Apple provides instructions: install the memory in an iMac - Apple Support

    Buy memory from a vendor who housed Macs. OWC / MacSales and Crucial are the only providers I have used and can recommend. Based on the PC vendors often sell RAM that does not meet the specifications of Apple and will not work on a Mac.

    Before you invest money you should first determine if the performance of your Mac is limited by available memory. For information about how to determine that please read use Activity Monitor system memory read and determine the amount of RAM is used (OS X Lion mountain and earlier versions). For later operating systems, please read Using Activity Monitor on your Mac.

  • How to replace RAM on Satellite 2450?

    I own a Satellite 2450-201 and want to upgrade the Ram. The only problem is to know how to access.

    Anyone know?

    Hello

    You won't find the memory locations at the bottom of the unit. As far as I know there are only places to drive HARD, battery and slim select bay.
    However, this computer has 2 sticks of memory under the keyboard.

    Please follow these steps:
    1. turn off the power to the computer
    2. remove the power adapter
    3. remove the battery
    4. open the screen and remove the small cover at the top of the keyboard
    5. you will find 3 screws. Remove it
    6. carefully remove the keyboard (please don t forget the flat cable)
    7. raise the insulating sheet covering the module memory to appear the module.

    Well, it's not very difficult to upgrde the memory and the entire statement, you will find in the user manual that must be installed on your laptop. Chapter 8

  • Ram SA60-332 problem

    I have a Satellite SA30-332 with a memory of 256 MB but the bios and the windows system information shows that the memory is only 192 MB. In addition, the computer runs very slowly especially at startup. Can someone help me solve this problem.
    Thank you.

    Hello

    your Satellite A30-332 has a video card with shared memory! either your video card has no own graphics RAM so that it shares the RAM with the memory of 'normal '!

    The A30 has an Intel 852GM chipset with integrated graphics. Intel 852GM has a dynamic RAM that passes automatically from 32 to 64 MB if more graphic strength is used!

    Don't care not so much, it's alright!

    On slow start up I need practical information to help you! What operating system and Ms are installed (recovery or own MS OS). In what order the laptop is slow, before or after this logon? How long it persists?

    Bye Bob

  • Satellite A80 129 DVD-RAM write speed problem

    Hi all!

    I have a problem. the thing is that I want to write in NERO 6 (last version purchased) a CD or DVD, but we will only write to me at slow speeds. In this laptop I MAST * a DVD-RAM UJ-830 s with DVD-R 8 x and 24 x CD - R write speed said.

    When I try to write on a CD it gives me only 16 x write speed, then where is x 24? It goes same for DVD, as I want to burn DVDs and it gives me only 2 x write speed.

    Please, do not put this fault on a CD or DVD, cause in my country there are limited suppliers of this type of media, so I won't change my media. They worked with my previous PC CD - RW fine, no speed problem.

    I want to know also if this is lack of DVD - RAM, where then find firmware for this burner?

    Thanks for your replies.

    BR, Kekec

    You should try to update nero, it might solve the problem.

    Also an update of the firmware can help, go to http://www.toshiba-europe.com/storage/index.asp?nav=HOM&page=HOM&frame=home

  • replacement screen t420 Lenovo problems

    Hey,.

    My screen cracked a few weeks ago and I decided to order this form from amazon:
    http://www.Amazon.com/Lenovo-ThinkPad-laptop-substitute-replacement/DP/B004VUO2N6/ref=sr_1_1?ie=UTF8...

    I followed a video online with instructions on how to replace the screen. Im sure that I installed it right but when I turned the laptop on only the backlight turned on and nothing else. Ive heard that it may be a problem with the display cable, but I'm not too sure. Any help would be how to fix this would be appreciated.

    There are 3 parties involved (motherboard, display, cable) and there is not much you can be sure of without some spare parts for trying. I'll say that GENERALLY, if the motherboard damaged the screen damage, the motherboard fuse jump. As your backlight lights up, it is not the fuse. I found that, if the backlight lights up, in most cases, the cable is not plugged straight into the connector on the motherboard or, more likely, behind the Panel. If you plug the connector on the Board with the new band, it may pull to one side or the other. In addition, the connector of the cable behind the Panel is fragile and easy to damage. Finally, your new Panel may be defective. Cable not connected right or damaged is probably more likely.

  • Satellite M105 - replacement hard drive capacity problem

    Hello, I recently installed a new hard drive of 320 GB (Seagate Momentus ST9320421AS) in my Toshiba Satellite M105-S3041 laptop to replace the original 80 GB drive.

    I use Windows XP Service Pack 3 and the latest firmware (v2.90).

    However, the new drive is restricted in some way to only about 130 GB.

    The size is not reported in the BIOS, just the model number of the drive. Utility disk management Windows reports the size as: go 127,81 and using a Live CD of Ubuntu Linux and Seagate Seatools reports also this drive must be about 130GB.

    So, I think that it is a BIOS or hardware problem. Can do something to allow me to use the full capacity of this disc?

    Help, please. Thank you.

    As far as I know that some specialists PC uses special tools to manipulate of the BIOS and the ability of the entire HARD disk can be used. But I really don t know what you can do.
    In my opinion, you need to use maximum supported HARD drive, but if you need more capacity for private data, you must use an external 2.5 HDD.

    Friend of mine has bought yesterday 400 GB 2.5 for 99 Euros only. It's a really good investment.

  • HP XW6600 workstation: Question to replace ram on HP XW6600 workstation

    Hello, recently my third dimm (it was 1 gb) stop working and now I have to replace it with a new one.

    My current setup on the Rams was 4 fb-DIMM 1 GB each and my question is: can I replace the non-working with a ram ddr2 single memory ram or I want only a fb-dimm?

    * Note: my mobo is Hewlett-Packard 0A9Ch (XU1 PROCESSOR).

    Thanks for your time

    These positions require the FB-DIMM (which are DDR2 as well!), standard DIMM doesn't work.

    In addition, the FBDIMM replacement must have the same rank as the original.

    BTW: FBDIMM is often quite cheap these days here (unless you want 4 GB or 8 GB modules), check your favorite online auction site. According to what you do with your workstation, it might be interesting to buy a kit 4x2GB instead of a single 1 GB module.

  • Replace ram on HP 4520 s could result in the warranty cancellation?

    I need to upgrade the ram and hard drive to a HP Probook 4520 s, and I don't want to void the warranty.

    Knowing that I'll have to remove the switchcover, the keyboard and palmrest.

    Would it be possible to take assistance material hp to do the upgrade for me, or if that is not supported under warranty?

    What are my options?

    Hello:

    According to the manual, I don't see where you need to remove the palmrest.

    You remove the battery, switchcover and drag the keyboard to the screen, carefully flip over and you should see the memory modules under there. I don't think that you need to disconnect the keyboard. Just let enclosed and modify memory. See note, DO NOT remove the tape, unless you replace the keyboard, what you're not.

    Do not void the warranty, unless physically damaged you coins that you have deleted, or physically damaged locations of memory. HP will not pay if you break the switch cover in half, for example.

    HP can do for you, but you pay a good sum of money for the service.  Upgrades are not part of the warranty coverage.

    Paul

  • HP Pavilion DV7 6b78us: Ram already, improved problem maybe?

    My computer works flawlessly can do more things without being slow and software works like a breeze, but before I had 6 GB of ram it was 90 to 95 percent, but now that I have 16GB I taught he would stay to 5 or 6 GB of ram im acually using 8 GB of ram without the software , I use, tahts 50%. I opened resourse screen to try to find out why so many used... idk if I should me worried, but I saw him gradually replace 4 GB to 8 GB. When I had 6 GB, it would remain to 4 GB which was the avarage laptop use without the software. Do you have any idea what's going on. the ram I got is perfect to unload for my laptop, everything works in harmony.

    If you have only 6 GB and the system tries to use 8 you will hit 'swap' which is used as a hard drive memory (and slows the system down much) and you can never get back 8 or 10 or whatever. Sometimes he uses very little, so the average should be less than 6... i. e 4. Now you have 16 so if she needs to 8, 10, 12, he can use it and the average will be higher. This proves that you need more than 6 GB.

  • XP Pro gives me error message < root windows > \system32\ntoskrnl.exe is damaged and must be replaced. How to replace or fix this problem?

    I tried to reinstall XP Pro, but then I get another error message the file for web printer windows cannot find so it won't let me not finished reinstalling XP.  How can I solve this problem or solve the problem with the ntoskrnl.exe that need to be replaced?

    Susan77,
    Try the items listed in this article: http://support.microsoft.com/kb/314477 
    It covers the error you see and can be useful. Typing of my new Windows 7 64 bit and love it! Soli Deo Gloria!

  • HP Pavilion x 360-11-n032nw: replacement RAM and HARD drive

    Hello

    I just want to replace

    -HDD at 7200 RPM

    -RAM for 1x8GB

    I can't find any specific info

    -If 8 GB works on this motherboard, or if she is DDR3/DDR3L (eg. L DDR3 KINGSTON 8 GB 1600 MHz CL11 SODIMM PC3-12800 is ok?)

    -where can I find HARD drive for this model adapter

    Could someone help me with this?

    See you soon

    Here is your manual that answers all your questions:

    Manual

    A single module of 8 GB of DDR3L-1600 will work and will downclock at 1333.

    Hard disk hardware Kit, number of spare 755740-001, includes support for hard disk, hard drive connection cable and screws.

    $57 HP kit

    This service model is not very easy and compromise security.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Windows 7 RAM and CPU problem

    Last week, I was playing League of legends and I was in the middle of a match, during the match, the client is crushed and restart windows because he had needed updating. After the update, I open League of legends to start my computer. And it took like 10 minutes usually, it takes about 30 seconds. Then when I've finally got back in the game you the fps went from 60 (before the update) to 12 (after the update). So I decided to look at the Task Manager, and it took up to 99% of the CPU. I reinstalled the game, the FPS was always the same, but he was faster. I tried to open my browser google chrome, it took a good 2 minutes. The CPU and ram, however, was very good. So I opened up a little more of my games and they are starting to take a lot of memory and CPU. I ran my full analysis of the 360 North, no viruses. I've done sfc/scannow, nothing wrong. I think scvhost programs might be the problem because when I analyze wait chain on my programs that take up a lot ran and CPU it is still a program scvhost in there. Help me please, this update of windows did the damage.

    Hello

    You can try to follow the following suggestions to solve the problem.

    Measures to reduce the use of CPU.

    1 - Press 'Ctrl', 'Shift', 'Esc' on your keyboard. This opens the task without any intermediate screen Manager.

    2 - Click on the "process" button in the Task Manager.

    3 - Click the "CPU" column heading up to what the arrow next to the label down points.

    4-click on a program you recognize who is using a high percentage of the CPU and click ' end process.» Click on "complete the process"reconfirm.» This facilitates upward on the load of the CPU. Use this step if you are not using a process, or the process is not responding. Do not use this procedure for windows processes.

    Reference:

    Optimize Windows 7 for better performance

    http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

    Note: Has ny data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

    I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

    Thank you

Maybe you are looking for

  • iOS 10 - only downloaded the music show

    Hi all, it seems that the music app requires us to display our iTunes purchases. I don't like it and want to only my downloaded music to appear on the device. I'm not ok with tapping the > downloaded tab every time I open the app. It must be a soluti

  • liked need update: for mac tiger 10.4.11 (have 3.030

    I have an older MAC laptop: can't afford a new. I am on Tiger 10.4.11. My firefox is 3.0.10 which will not longer work. Updates are too advanced. Where can I get a download of firefox for MY OLD computer that works? Thank you

  • How to start to use hidden on Portege Z830 SSD 20 GB partitions?

    On a Z830 about 20 GB (a little) 120 GB is exhausted by 2 hidden recovery partitions and another hidden partition whose purpose is not so clear to me. In light of 96 GB available on drive C is used quickly, I would like to be able to use actively as

  • Use the port RS-485 of CFP in mode 2 son

  • Application built with an OPC Server

    Hello everyoneI build the application on the development using wich S7 computer - connected to the OPC Server 1200and I want to build the application to run the VI on another PC without installing labview, however when I finished to build the applica