Replacing the hard drive HP G62-450SA model / recovery. Windows 7

Hello

Last week my laptop started running very slowly, and after a few tests, it seems that the hard drive is on its way.

I phoned to HP supports, however is out of warranty I wasn't able to get a real support, but advised him to watch the online support pages to back up my files, create a file recovery on a usb device and then it would be as simple as taking on the old hard drive, put in the new, and following the instructions to recover my system and files.

So after these tips, I've created:

-A recovery image USB on a Virgin USB key, using the Recovery Manager

-A backup on an external hard drive using the backup and restore

-An image of the system by using the backup and restore.

Then I replaced the hard drive.

When I turned on the laptop all I get is a black screen that says "no boot device - insert the diskette and press any key".

I have not all discs. I thought that was the point of creating the recovery image on the USB key? I insert the USB key, and it is not recognized.

If at this point, I'm stuck. I'm not all boards because HP say they have to charge me.

Please can anyone here tell me what to do next? What I need to buy recovery discs or is there a way I can install the new hard drive by using the above files?

Thanks in advance

Hello

You are welcome

Another option, you can try would be to restore the system image you created - you can do the following.

If you do not, use another PC to create a rescue CD Windows 7.  Download the ISO relevant among the links below.

Windows 7 32 bit

Windows 7 64 bit

You must use an app like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn options) to burn the ISO to a CD - a guide on the use of ImgBurn to write an ISO on a disc is here.

When creating, type following the ESC key as soon as you start the launch of the laptop Boot Menu, and then insert the rescue CD.  Select boot options (usually f9 ), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

Connect the drive that contains the system image you have created and then follow method 3 below to reload the image on the new HARD drive.

http://www.shivaranjan.com/2009/05/21/Windows-7-How-to-restore-Windows-7-partition-or-hard-disk-part...

Kind regards

DP - K

Tags: Notebooks

Similar Questions

  • I had pre installed windows vista on my laptop. now, I replaced the hard drive. so, can we recover only windows giving you the serial number?

    I had pre installed windows vista on my laptop. now, I replaced the hard drive. so, can we recover only windows giving you the serial number? I have sony laptop.

    How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

    There is no Vista free download legal available.

    http://eSupport.Sony.com/

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    Mick Murphy - Microsoft partner

  • HP Pavilion Notebook n267sa 15: replace the hard drive and restore its 8.1 windows

    the hard drive corrupt including the partion of rescue I had to replace the hard drive. This left me with a work computer, but no o/s. where and how can I get a copy of the 8.1 window without having to buy a new copy

    Hello:

    You can order this e-partner HP recovery disks from the link below for your model.

    http://www.best2serve.com/page/rcd_landing?txt_search=F9F41EA

    You can also see if you can order directly from HP to the United Kingdom by calling this number...

    0207-660-0596

    Mon - Fri 08:30 - 18:00
    (except public holidays)

  • My G62-340US, I just had to replace the hard drive. My recovery disks appear to be compromised. Help

    On my G62-340US, I just had to replace the hard drive. I did 4 recovery disks when it was new. Now restore the recovery discs 3 ran, but will not be the 4th disk. The 4th information located anywhere without having to buy a new set? Where can I buy a single disc?

    Hello:

    As far as I know, you would have to buy a whole series of new.

    But, if you can read all 25 characters of the product key of W7 on the bottom of your laptop, I have a free solution to install a simplified version of W7 using the code the product key on your laptop.

    Here's how...

    Download the ISO file from W7 Home Premium 64 bit from the Microsoft link below.

    http://MSFT.digitalrivercontent.NET/win/X17-58997.ISO 2147483647 English Windows 7 Home Premium x 64 X 17 - 58997.iso

    Make sure that you got the file from xx GB 3. integers download, in rare circumstances, you get a full notification of download, but you do not receive the entire file to download.

    After you download the ISO file, you can burn it to a DVD using the ISO file burn option on your DVD burning program, or you can use this tool to transfer the ISO to a flash USB DVD or 4 GB drive.

    The tool also performs the bootable media.

    http://www.microsoftstore.com/store/msusa/HTML/pbPage.Help_Win7_usbdvd_dwnTool

    Then go to the care of your laptop and driver page for available software and drivers that you need.

    http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&DLC=en&docName=c02497777&LC=en&product=4308554

  • Qosmio X 500 - 10W - can I replace the HARD drive with another?

    Hello

    I have a Qosmio X 500 - 10W with two drive HARD Toshiba MK5055GSX 500 GB 5400 RPM 8 MB? SATA II but is one of the hs so I'm wondering if I can be replaced by a more powerful style, drive HARD 750 GB 7200 RPM / min 16 MB Toshiba courses?

    Thank you

    Hey,.

    Your question is a bit hard to understand, but I think you want to replace the HARD drive with another (faster) model, right?

    Well, that s no problem. 7200 RPM hard drives works, they are a little stronger, but they're faster so if you need more performance without problem.
    750 GB or more are also no problem because the SATA interface is not the limited capacity. Theoretically 1 TB or more should also work.

    Anyway, you can buy the 750Go you mentioned that it will work. :)
    ?

  • Restore questions after replacing the hard drive

    I have created a backup image and restore full of my computer after getting the hard drive errors via the MS utility on a USB key.  I replaced the hard drive internal and restored Vista using recovery disks.  Now when I want to restore the backup, Windows is not recognize files of backup/recovery.  What am I supposed to do?

    Hello

     
    Since you have replaced the hard drive and you try to install Windows on the new drive. Whenever the hard drive is replaced, the operating system must be reinstalled and restore all data you have saved

    You can check out the link and check if it helps:
    Restore files from a backup
    http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup
     
    If the previous step fails, then try to restore the files by using the Windows recovery options using the link below.
    Restore your computer from a system image backup
    http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

    Also check out the link:

     
  • This copy of Windows is not genuine after replacing the hard drive

    Hello, I bought a copy of windows 7 Home. My hard drive crashed. replaced the hard drive, now it tells me that windows is authentic noty. How can I fix it?

    So that we can analyze and solve a problem of non-genuine notification you can experience, download and run it Microsoft Genuine Advantage diagnostic tool . 

    After you run the tool, click on the button continue, then click on the copy button, then paste the report into your post.  In addition, please include a brief question or relevant information that might be helpful in our efforts to help you.

    Thank you!

    Carey Frisch

  • Windows 8 license after replacing the HARD drive

    Original title: change of equipment (HARD drive)

    Good night, I have a computer laptop windows 8 and I fear that the HARD drive (malfunction) he'll need replacement.

    My question is, what will happen to my windows 8 license, once my current HARD drive stop working (because the key is encrypted in the bios)?  
    Please note that in the country where I live customer support is, at best, ineffective, so personal attention is not an option.
    Thank you before hand.
    Send you my best regards.

    Hi, Caesar,

    Activation pairs your product key in your hardware configuration and helps to verify that your copy of Windows is not been used on more computers than to allow the 3668Microsoft Software License Terms.

    If you change the hardware on your PC, you must contact support to activate Windows by phone.

    As you have decided to replace the hard drive, you could face an activation/Windows not genuine error.  You can follow these steps to make a phone activation.

    a. press Windows key + X , then click run, then type: slui.exe 4

    b. press the ENTER key

    c. Select your country from the list.

    d. choose telephone activation .

    e. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

    f. explain your problem to the support person

    See the article:
    How to activate a Microsoft product using Microsoft Product Activation Center

    http://support.Microsoft.com/kb/950929/en-us

    In addition, refer to this topic:
    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/hardware-changes-no-more-activations-available/ed283ad6-D462-478f-a1a0-8922226ce82b

    Hope this information helps.  If you have any other questions, we would be happy to help you.

  • replacing the hard drive G62

    So, I got the error hard drive 1 303 and discovered that means that my hard drive went bad. I would like to get another hard drive has the same amount of space or more. I would also like to know what type of ram is compatible with my laptop for later possible purchases. My laptop model is HP G62 Notebook Pc and the product id is XH058UA #ABA. I also can't any thaan further than the windows boot screen, so thanks in advance

    Hello

    Your laptop is considered as coming with a 320 GB drive hard, but you can install just as easily a 500 GB or 750 GB HARD drive if you want a little more space - readers at the following links are examples that would be perfect for your laptop.

    Hard drive 500 GB

    750 GB hard drive.

    The procedure to replace the hard drive begins on Page 57 of your & Maintenance Guide.

    Regarding the upgrade your Ram, the maximum is only 8 GB (IE 2 x 4 GB Modules) - an example of an upgrade appropriate can be seen on the link below.

    http://www.crucial.com/USA/en/HP-G62-339wm/CT5305514

    Kind regards

    DP - K

  • How to replace the hard drive with an SSD on a model of end 2011 MacBook Pro 15 inch, A1286

    Hello

    I would like to replace the hard drive on my model of end 2011 MacBook Pro 15 inch, A1286 with a disk solid state drive (SSD). First of all, I would like to know if this is possible. Second, what is the best way to do it? I'm under the Yosemite OS if that makes a difference.

    Here are some technical details of my current system:

    -MacBook Pro 15 inch, late 2011 model A1286

    -OS yosemite

    -16 GB of memory/RAM

    -Currently using stock HD

    All instructions step by step would be helpful with what software should I use to make backups of my current operating system (e.g., SuperDuper). I would also like to know what tools or material I need like type of screwdriver, cables to transfer data to the SSD, etc.. My goal is to not have to reinstall each app one by one on the SSD, but if that's the only way to do it then it's okay.

    Thanks in advance for any help.

    You can see instructions OWC here. Tools are mentioned in the discussion (I used a plastic knife picnic with the stronger edge somewhat blunt for nylon pry tool). I suggest you invest in one of these external fences. Install the SSD in who and clone internally externally with CarbonCopyCloner or SuperDuper. Then move the external drive of the internal drive after the start of the SSD in the external to confirm the operation.

  • Replace the HARD drive - same MODEL same vs P/N

    I intend to replace the HARD drive in my T30 with the same original title Travelstar.  There seems to be a lot of available.  It's cheaper to buy a disk without the caddy and I can transfer the caddy from the old drive.  I found the discs "naked" with the MODEL number matching (ICN25N040ATCS04-0) but the PART number is different (mine is 08K 1089).  Specs are the same.   Is a football match of MODEL number sufficient, or do the different p / n apply to different interfaces or other settings that should I worry about the?

    TIA,

    Dan

    as long as it is a form factor 2.5 inch PATA 9.5 mm disk hard drive then its okay. The travelstar disc is used in many different company machines, so the player you replace may not be a machine IBM/Lenovo, it might be just as likely a compaq machine, etc..

    But nevertheless, it should work.

  • Replacing the HARD drive

    My laptop is model: HP G62 - 361TX NB PC all THE... My HARD drive I thnk not working not properly... I'll replace it... ghoulish u help me is this drive is Compatible with my laptop...

    Internal hard drive Hitachi 500 GB portable (Travelstar 5K 1000)

    Portable Device Type 2.5 inch spin speed disk capacity 500 GB drive HARD 5400 RPM Interface SATA 3.0 Gbps Memory Cache 8 MB average latency 5.5 ms average seek time 12 ms (read) reliability 600000 (charge/discharge Cycles)

    OR

    WD 1 TB computer internal laptop hard drive (WD10JPVT/WD10JPVX)

    DRIVE CONFIGURATION Handheld Device Type 2.5 inch HDD Drive capacity 1 TB Spin speed 5400 RPM Interface SATA 3.0 Gbps Cache Memory 8 MB transfer rate 150 MB/s data transfer rate (shared with host) 3072 MB / s Non-recoverable Read Error 1 per 10 ^ 14 reliability 600000 (charge/discharge Cycles)

    OR

    Solid State Drive Hybrid 7 mm thickness portable Seagate internal hard drive 500 GB (ST500LM000)

    DISK CONFIGURATION Handheld Device Type disk drive HARD Interface SATA 6.0 GB/s 500 GB capacity

    Please help me with this...

    One of them will work, but of the three, you want the Seagate hybrid car. It will be faster, even if more expensive.

    Here is your Service Manual:

    Manual

    Replacing the hard drive begins on page 4-8.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Equium A100-338, replacing the hard drive

    Hi, the hard drive from my Toshiba Equium A100-338 just broke down on me, and now I think to replace. Because I'm not good material, I thought I have ask for advice about it here first. Is this an easy repair that can be done on your own? If so, how can I know if my computer match which new hard drive? I know that I need a 2.5 inch Sata-150 and all that, but I'm not sure of the compatibility.

    In addition, it is worth the money to make repairs like this on such an old computer? I wouldn't throw it out when everything else seems to work very well.

    Hello

    In the Toshiba forum you will find here with some nice instructions how to replace a HARD drive on the different laptop models.
    I found a movie that explains how do on Satellite A200.

    Replacing the HARD drive is not very delicate, and the process is similar for all models of laptops.
    Check it out:
    http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=120

  • Re: Tecra A9 - 11M - replace the HARD drive with a larger

    I have a Tecra A9 - 11 M with Windows XP Professional installed. I would like to replace the hard drive with a larger drive and install Windows 7 Professional.

    Any suggestions on recommended records say 500 MB?

    Difficulties to install Windows 7 on this model?

    Hey,.

    > Any suggestions on recommended records say 500 MB?
    I assume you mean 500 GB and not 500MB, right? ;)

    Well, the Tecra A9 already supports SATA interface and there is no limit of capacity on SATA interface, so you can install a 500 GB HARD drive or more (750 GB, etc.). Just make sure that it s 2.5 SATA HDD.

    You can choose each brand of HARD drive because each model will not work. You can buy a Toshiba HDD, Western Digital HARD drive or another. No problem ;)

  • Equium - how to replace the HARD drive?

    Hello

    I need to replace the hard drive on my Toshiba Equium.
    Can someone tell me the procedure? I changed it once before, and I remember having to press one of the function keys when I turned on the laptop with the new hard drive installed.
    Should I have the recovery disk when the laptop is turned on with the new hard drive installed?

    Thank you very much

    Tim.

    Hey,.

    You should take a look in your user manual. Sometimes you will find a detailed how instruction replace the HARD disk, but it according to your laptop model.

    If you swapped the HARD drive, you need to reinstall Windows. Therefore, you can take the Toshiba Recovery disk that will restore the initial setup in a few minutes with all the drivers and tools. You only have to boot from that drive and that s all! :)

Maybe you are looking for

  • Desktop HP Pavilion 550-100na: graphics card

    I want to update my graphics card, which is currently AMD Radeon R5-330.  Power supply is 180W. I would like to know where I can find recommendations for a graphics card that is compatible with windows 10.  I'm not a gamer, but use photoshop and watc

  • Corrupt recycle them bin

    How can I fix a corrupt trash on my acer aspire one netbook computer. Model number D250.

  • Starter DSLR

    I'm looking to move to a digital SLR. Keep in mind, I'm NEW... be easy on me hehe =) I am crossed between some T3, T3i and SL1. The t3 are a few years older, so I don't know if I would be wise to buy an older model of the camera. For the money, I wou

  • Add a new user administrative "local."

    Hello I have windows vista Business 64 bit. I would like to add a user LOCAL (domain = "this computer"). I when in "Control Panel"-> "Accounts"-> "Manage user accounts"-> (I can see the list of users) "Add...". » Then I enter the user name: "UserTest

  • GANYMEDE + vs RADIUS

    Hello I know this has been asked several times, but I think I'd ask myself. We have ACS at the moment and need to move to an improved version due to updates of systems and so inconsistent with our most recent operating systems. This means that we wil