Replacing the HARD drive on the satellite A110-252

Similar Questions

• Player card on the satellite A110-252 issue

  Hi - I'm in a good spot of bother with my satellite A110-252, I bought at the end of the summer 2006. He executed a lot for all this time and I have taken good care of the machine.

  However, today, I fear I might have accidentally destroyed the machine. The laptop has a card reader all-in-one, located on the front, above the hard drive and next door the status lights. Next to the drive are the symbols of the cards SD, XD and Memory Stick from Sony. I assumed the reader would be my 4 GB Sony Memory Stick Duo, but too late, I realized that my memory stick has been among the most recent, smaller, and it is now stuck in the slot.

  Restart the computer, Windows fails to start (I'm typing this from my Linux partition, which I use in case of emergency), and when trying safe mode starts it crashes on 'getio.sys '. The light on the card reader flashes and flashes constantly when Windows tries to start. This suggests that the stick stuck is to interrupt the boot - the system tries to read the map, but because he crashes against the pins it screws to the top of the boot process.

  Is there a way to get around this? I could disable the card somehow, either via the software reader or physically? Any suggestion would be appreciated because I very strongly dependent on the my laptop Windows partition.

  Hello

  Check the BIOS settings and try to change the order of boot to HDD ODD FDD LAN or something like that.

  But why you n t contact the technician of laptop (ASP in your country) and request the removal of this card is not compatible?
  You should definitely do this.

• Problems with the Windows Activation on the satellite A110-252

  Hello

  Ive recently bought a Toshiba Equium A110-252 without recovery disks. I tried to install with a Windows XP Home OEM edition discs but after installtion that he used to connect on windows without be activated everything first. I tried activatingit through my network and it has activated, but when I try and log in again, he asks to be reactivated. What can I do?

  Thank you

  The first thing we do is to contact your dealer and provide your laptop comes without recovery media. Please clarify this as soon as possible.

  With each CD facilities, there must be key activations. You try to use the activation key of the label on your laptop?

• Loss of connection Wifi in fast changing users on the satellite A110-252

  Hello

  In accordance with the subject line, but the connection seems to be disconnected when you return to the user. In other words, the connection is maintained while you're in the other user accounts, but when you return, it is disconnected and then reconnected. Hope it makes sense.

  I added the following to the record that worked on my last Toshiba (Satellite 1800-921 with PC Wifi card)

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\KeepRASConnections = 1

  But it always disconnects back to the user account.

  Any ideas how I can stop this maddening behavior?

  Thank you

  Dougie

  Hello

  tried to update the drivers of your wireless and chipset? Attention to the updates of Windows and reinstall the wireless client.
  Your problem is truly software related, then perhaps update this things I mentioned above should probably help.

  BTW. I didn t had the same problem but I solved problems with my wifi connection by updating the drivers, etc...

  Welcome them

• Replace my drive HARD satellite A110-252

  Hello.

  I read about the type of hard drive of my laptop, but my problem is WHERE IS THE HARD DRIVE LOCATED in EQUIUM A110-252? I know that it is ussually located where the battery is located but I can't see it.

  Please help me. Thank you very much.

  Hello

  I have the Satellite M70 and it's the same notebook as your Satellite A110. It is so easy to find the HARD drive. When you remove the dough on the bottom, you can see three covers fixed with screws.

  Am I right about that? For me, it makes sense that HDD is under a larger. Cover in the middle is for the RAM, and a smaller must be WLAN Card. Remove cover fixed with three screws and you will have access to the HARD disk.

  Good bye

• Replace old hard drive with an SSD.  Nowsome keys on the keyboard no longer works.  Ex 'e' and 'b' keys no longer work?  Any idea what could take place in the disc replacement?

  Replace old hard drive with an SSD.  Now some of the keys on the keyboard stopped working.  Ex 'e' and 'b' keys no longer work?  Any idea what could take place in the disc replacement?

  Probably nothing, it's probably a fluke. Try resetting the SMC and the PRAM by iMac Intel SCM and reset the PRAM. If this does not work, try a USB keyboard to test, if it works then your original keyboard has failed and must be replaced.

• Can't see the new hard drive on my Satellite Pro 6100

  I bought a new Toshiba 40 GB hard drive for my Satellite Pro 6100.
  I installed it in the Bay, but it is not recognized in the BIOS, or when I try to reinstall using the recovery disk!
  Bios recognize that there are in the car, even if it is not formatted?
  I'm missing something?

  Thanks in advance

  Neil

  It should work!

  The reader should also be recognized that even he is not formatted...

  3 things you can do:
  At the start you can go in bootmenu and check if the drive is recognized on the 1st controller.
  If this is not the case, check the configuration of the drive (master, slave, CSEL).

  If this is not enough to check the toshiba support website and download the latest version of the bios (probably you already have, check as mentioned above)

  If this does not work your new drive (or worse: your controller) could be faulty. If the reader of the Moose still work on your laptop, check the 40 GB drive to another laptop or PC with adapter ATA connection normal.

• How to replace the CPU on satellite A110-252

  I have a satellite A110-252 and need to know how to replace the cpu, hope someone can help you.

  Doug

  First of all there if the new processor would be compatible with the BIOS.
  Second, you should know that a plu CPU produce more heat and this would lead to overheating.
  Are you sure that your laptop would deal with the new CPU?
  I don t think so

  In any case, I found this page:
  http://www.irisvista.com/tech/

  There may be some useful pic and instructions for you

  But once again; If I was you, I wouldn't try it.

• How to partition the hard drive in my satellite M40X-189?

  Please can you advise the team?
  I would like to have the operating system and application programs in a partition and the data I've created in another partition.
  Please can I have advice from the team?
  Has anyone partitioned the hard drive on their satellite M40X-189 and what software did you use to do the partitioning?
  Also, I just defragged my hard drive and the card reader can be seen at: http://www.seniorvalues.org/drive%20map.jpg
  I am curious about the above provision given that free space if 52%, but white space does not reflect this and there is a piece of defragmented files and folders around the middle of the big whitespace at the end of the training I was expecting to be adjacent to the last great defragmented file.
  TIA
  Welshmike

  Hello

  I use partition magic to create and manage new partitions. In my opinion it of the best tool if you want to work with partitions.
  I have 2 partitions on my unit. C for OS and D for the 3rd of data and files. In this case if I recover my unit only the first C partition will be formatted.

  Good bye

• Replace a hard drive in dv6 but is not completed the installation phase

  I replaced my hard drive with a disks recommended by an expert from HP in this forum, and he seemed fine. After starting with my #1 recovery and loading of each disk when you are prompted, I got the final guest/message: "preparation of the recovery is complete. Remove the system recovery media. Once the computer is restarted, the installation of recovery process will begin... Support on continue restart the computer. "When I hit the"Continue"button, the screen went black as if it has been restarted. But instead, a black screen with the HP logo in the centre appeared, with the text: "Press ESC for Boot Menu" in white letters in the lower left corner. Waited about half an hour, and then you press the ESC key, but it changed nothing. Same screen HP. And that's all - nothing else has happened. I left it on all night, thinking perhaps that it takes time to get there, but in the morning, the same screen was there and my phone was hot as if in use. So I turned it off right there. What would not, and that I should try now?

  Turns out that I don't need to download the Microsoft Windows software and then struggle to find the right drivers, thank God. My recovery discs works perfectly after all.

  Having read tons and tons of forum posts about this problem, I finally found a solution that worked really - posted by another user, GoodTimes81 (thanks!). This solution is pasted below (with numbers and an additional note added by me):

  (1) put the recovery disk #1 in and

  (2) when the Recovery Manager screen loads, you will get a few options, but the one you want is the command prompt (which appears after you select "Run a computer check.")

  (3) in the command prompt, I typed bootrec.exe/fixmbr, you press on enter and waited it says the operation completed successfully.

  (4) I typed bootrec/fixboot and then you press on enter and again waited until he said the operation has completed successfully.

  (5) after having done that I left the command line, restarted my computer and waited until my recovery disk #1 loaded up again.

  (6) then, I chose the recovery system to the Recovery Manager screen and went through the process of insertion of disks 1 to 4.  When the 4th disc is complete, it says remove the recovery disc and press on continue, which I did, then it restarts, except that this time it restarted and actually started the installation and facilities it is supposed to do and has completed the recovery process.
  _________

  The other user said these steps solved the problem for her, and they could work for you. Finally, they worked for me, except after step 5, the recovery disk #1 would not load again. I received an error message (the black screen, white letters) mentioning a problem of location startup (sorry, that I did not write down exactly what he says). I pressed the button power to restart, but got the same error message.

  So I pressed the button to power again but this time, you press F11 repeatedly until I had a menu of options. The option to boot was F9, then I pressed F9 and selected "CD/DVD player" (which I had already done elsewhere earlier in the process, but maybe it had reset after entering the command request?) and then restarted again.

  This time, it worked, and I was back in step 6 above. Load the discs one at a time (note: I have 7 discs instead of the 4 mentioned by another user), and after that the disc was done and I got the prompt to "Press continued to restart", it restarted and he proceeded to load all the software, drivers, etc as it is supposed to. Yay!

• I replaced my hard drive. How can I get Windows XP loaded on my computer? I've already paid the fee.

  I replaced my hard drive.  How can I get Windows XP loaded on my computer?  I've already paid the fee

  Hello rsmith3042000

  What kind of system do you have?

  Do you have an XP installation CD?

  Here are installation tutorials

  http://www.theeldergeek.com/xp_pro_install_-_graphic.htm

  http://www.michaelstevenstech.com/cleanxpinstall.html

  If you had only a recovery partition, it's lost now so you might contact the manufacturer and ask for the CD recovery.

  .

• I had a computer repair man replace my hard drive and restore my laptop and now my orginal key does not work with the copy of vista it has installed and it won't validate.

  I had a computer repair man replace my hard drive and restore my laptop and now my orginal key does not work with the copy of vista it has installed and it won't validate how can I solve this
  I have an acer

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Validation status: invalid license
  Validation code: 50
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - XY9X3 - JDXYP-6CJ97
  The Windows Product Key hash: xFQJU8srKsovk6p1Lk1yW93in4E =
  Windows product ID: 89583-OEM-7332157-00211
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.0.6002.2.00010300.2.0.003
  ID: {F20B4B72-1308-45BE-8F90-95E91A3F0AAF} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows Vista (TM) Home Premium
  Architecture: 0 x 00000009
  Build lab: 6002.vistasp2_gdr.110617 - 0336
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {F20B4B72-1308-45BE-8F90-95E91A3F0AAF}1.9.0027.06.0.6002.2.00010300.2.0.003x 64*-*-*-*-6CJ9789583-OEM-7332157-002112S-1-5-21-923204104-223683984-168055983Acer Extensa 5630 Phoenix Technologies LTD.V1.30 20090319000000.000000 + 00070333507018400FA04090409US Mountain Standard Time(GMT-07:00)03ACRSYSACRPRDCT109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.0.6002.18005
  Name: Windows Vista, HomePremium edition
  Description: operating system Windows - Vista, channel OEM_SLP
  Activation ID: bffdc375-bbd5-499d-8ef1-4f37b61c895f
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 89583-00146-321-500211-02-1033-6002.0000-0042012
  Installation ID: 004511331255365043724851364501374781338933223323713385
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475
  Partial product key: 6CJ97
  License status: Notification
  Notification reason: 0xC004F063.

  Windows Activation Technologies-->
  N/A

  --> HWID data
  Current HWID of Hash: OgAAAAEAAgABAAIAAwACAAAAAwABAAEAeqjWy6pVxGJ6f0DXhgfkNoBBsJzy9ErM1F/eG4QdrFYqhQ is

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20000
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC APIC PTLTD
  FACP INTEL CRESTLNE
  HPET INTEL CRESTLNE
  START PTLTD $SBFTBL$
  MCFG INTEL CRESTLNE
  SLIC ACRSYS ACRPRDCT
  ASF!            OEMID OEMTBL
  SSDT BrtRef DD01BRT
  SSDT BrtRef DD01BRT

  Ah! -in this case, it is not necessary.

  I see from my records that a similar case has been solved by uninstalling and reinstalling the update WAT - KB971033

  Open the Windows Update - click the link view updates installed on the left of the page

  in the list, find the WAT update KB971033, and then uninstall it.

  Then restart and reinstall the update from here - http://support.microsoft.com/kb/971033

  redemarrer restart again, then try to change your product key to the one on the sticker - what is happening this time?

• Reinstallation of Windows 7 download needed after the replacement of hard drive and Vista restore

  I replaced a hard drive crashed and restored the original Vista 32bits.  I have the product key for the upgrade of Windows 7 that I bought a year or two ago.  I now need to find the download for my relocation (without paying again).  Where should I go for the download?

  I replaced a hard drive crashed and restored the original Vista 32bits.  I have the product key for the upgrade of Windows 7 that I bought a year or two ago.  I now need to find the download for my relocation (without paying again).  Where should I go for the download?

  If you purchased Windows from the Microsoft Store, you can log on to your account and select the correct level of bit for download, then download.

  http://store.Microsoft.com/Microsoft/Windows-Windows-7/category/102

  How to order the replacement drive:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/replacement-CD/fb8230d4-000F-4ee7-b732-c9f8fff28bfd

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• I just replaced my hard drive. Can I replace everthing that I had saved by choosing "Restore" and it points to a saved file? Also all the Windows setting will find?

  I just replaced my hard drive. Can I replace everthing that I had saved by choosing "Restore" and it points to a saved file? Also all the Windows setting will find?

  Find all programs I had installed in C:?

  See if this tutorial will help.

  http://www.SevenForums.com/tutorials/675-system-image-recovery.html

• When I replaced a hard drive, I wanted the same drive letter, but he wants me to take another. How can I assign the drive letter, I replaced?

  When I replaced a hard drive, I wanted the same drive letter, but he wants me to take another. How can I assign the drive letter, that I replaced. The letter is now used by another device?

  Open disk management, find the drive using the drive letter you want to use, change the drive letter of this to 'Z', find the new drive, change the drive letter that you want, and then change the drive letter of the drive you have labeled it 'Z' to a drive letter of your taste.

  Jim