Replacing the LCD screen

Similar Questions

• Satellite A100 - display balack after replacing the LCD screen

  Hello

  So I'm trying to fix a LCD on a Satellite A100. The girl I am set as said she accidentally hit the screen with his hand and became black.

  When you turn on the laptop I can here windows activate, nothing is on the LCD screen. It is not the backlight, because I don't see anything on the screen at all. So I bought a replacement LCD screen and that one does not work either. Same question

  I think it is the inverter, any suggestions?

  Could be the sensor cover?

  Thank you! Kyle

  Hi Kyle,.

  Did you buy this new LCD screen to a service provider authorized? I ask this question because it would be interesting to know if it s a Toshiba valid a party or 3rd party a spare.

  Did you check the connection of the LCD cable? There may be a link to lose or the cable itself is touched.
  Theoretically, it might be the FL inverter too, but I doubt that. Otherwise, you'd see something on the screen but very dark.

• Satellite 2410-303-help with replacing the LCD screen

  Hello
  My screen is dead and must be replaced. Can someone tell me where I can get a replacement and at what price? I live in Mauritius and cannot get spare here.
  Thank you mnay
  Jawa

  Hi Jawa

  In my opinion there is not a lot of options. You can order parts by authorized service partners or order it from some independent PC shop. Check if you can find a partner in your countries, or maybe someone else (they can send you everything you need to). Another way Google a little bit and I'm sure you'll find someone who can send you a new LCD screen for your laptop.

  On the price I can't tell you much because we walked free and the price is different from one country to the other.

• Satellite A300 Question on replacing the LCD screen

  I had a minor accident with my A300, which ultimately ended in me the screen cracking.
  (Yes, I know, what a fool. Believe me, it was a complete accident.)

  In any case, the after-sales service is closed until January 5, but I was wondering if anyone might know how a replacement screen would be me back?

  Will it cost me more than $80 just to have the 'thing' rated and side on, and I need to know about how I look, as I recently had my end of maternity payments, so we are a middle-income.

  Time to talk Abou...

  Change the LCD is a little tricky. You have to remove a lot of and remove the screws much.

  This is a forum user to Yes, so I think nobody with experience here's how. I think the best is you go in an ASP.

• Resolution of the different native screen after replacing the LCD screen

  I recently had my HP Pavilion DV7 laptop screen replaced after getting a crack in it. He was sent to HP for repair and she came back yesterday with a new brand, screen exactly like my old. While the screen looks the same as the old, when I started, it is a completely different resolution. On the old screen that broke the (maximum) native resolution was 1600 x 900. However, on the new, the (maximum) native resolution is 1920 x 1080. I'm still able to go back to 1600 x 900, but when I do the text becomes blurry. I suppose I could use the 1920 x 1080, but it would take a lot of time to get used to it, especially since I am using 1600 x 900 for two years. So my question is, why is there another native resolution and is it possible to fix the blur with 1600 x 900? I don't understand why all this is happening, because the screen looks exactly like my old, same size and all. I don't know of changes to software that took place or the other, all what has been messed with to my knowledge was the physical display.

  Thank you!

  Hello:

  From the sound of it, HP has replaced your original screen with better resolution by mistake.

  There is nothing you can do except to report it to the support of HP and ask to the screen to be replaced by one of the same characteristics as yours, or you will have to get used to the larger screen real estate and more small text and objects, or use a different resolution which may be more attractive to you.

• How to replace the LCD screen Flex cable for a HP Pavilion dv4-1220us

  Can someone give me a step by step procedure replacing the screen Flex cable connection without disassembling the entire computer

  Lanny1 wrote:

  Thanks for the manual, I am waiting for cable to arrive. This whole process can finish by the enemy who me to try to replace the cable. I can finish with new computer

  Hello again!

  You are the very welcome.  You need to update with the results.

  Have a great day.

• Beep codes 8 (redirect) it is time to replace the lcd

  Hi guys, I have dell vostro laptop 2520 integer October 2013, the warranty period is over recently I placed a problem where my laptop gives 8 beep codes. I did the test LCD but still healthy.  It's time for me to replace the lcd screen or all can be done without replacing. If this is not the case, how replacement cost. Thanks awaiting response.

  Handsome of Ganesh,

  (India)

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.

• Tecra M2: Can I replace laptops LCD screen SXGA +.

  Anyone know if it is possible to change the standard XGA screen, I have in my Tecra M2 with a screen SXGA +. Do I need to change anything other than the LCD?

  Thank you very much.
  D

  Hello

  As far as I know, that laptops come with a different hardware configuration. The same series of laptop computer can be delivered with the screen XGA and SXGA screen +.

  I think that you can replace your TFT screen to the other, but the display size should be the same.
  I guess the Tecra M2 needs a 14.1 screen.

  But why do you want to replace the laptop screen? First of all, you should know that the replacement of the screen isn't easy and it should be done by a technician or a person who has a good laptop experience. In addition, the new view is not cheap. You have to spend about $ 350 for a new game and I think that it s not worth.

  But it's you choice buddy

• Gigaframe L81 - after 2-3 seconds, the LCD screen turns off

  Hello!

  I think, I missconfigurated my camera... I put the automatic light (auto light) options, then the LCD is turned off. OK, its light of day here, but how can she Cook?

  And - perhaps because of the thing said? -its LCD screen turns off every time, when I push the power on button. I'm tired of using the reset switch, but she has - at least, in the LCD - no effect.

  Device is reset, then lights up the screen, I see him starting, I can touch control "buttons" on the right side (I can see the blue lights), but after only 2-3 seconds, the LCD display turns off again.

  Although I can do anything on my camera - attach PC files, copy or dele (ordered from Windows) etc. I just don't see anything in the LCD screen.

  What's wrong?

  If it still does not work after resetting it, then it may be a hardware problem.

  I think that you will need for repair/replacement.

• Re: Replace the LCD Satellite A505-S6960

  Hello

  I bought a replacement LCD screen for my satellite a505-s6960.
  I can't pull the old a.
  I unscrewed several screws on the bezel.
  However, I can't get out of the bezel.

  Any ideas?

  Take a look at irisvista.com. you will find information how to remove the LCD screen. Perhaps, you will find something useful

  See you soon

• Please help with replacing the W700 screen

  I'm at the end of my mind here, so I really hope that someone can help you. First of all, some background: I work for my part, repair and maintenance of computers, and I have a client with a Lenovo W700 requiring a new screen. The original had been broken.

  Seemed easy enough, so I ordered a so-called compatible more than a month. I installed it and it did not work. I sent a replacement. The replacement does not work either. I thought at this point, that a genuine part of Lenovo would be better than a "compatible" by someone else. I went on eBay and found the original part.

  It does not, almost - but the backlight does not come on. I can vaguely see what is on the screen, but that's all. I sent a replacement, but the replacement has the same question. But here's the kicker: the original BROKEN screen backlight works normally.

  What happens here? Y at - it a setting I missed, some rider, I need to clear, or is it possible there is something wrong with the machine? I need a definitive answer for my client, but here, I'm stumped.

  I can't really diagnose of 3000 miles away, but you can certainly damage the motherboard by breaking the screen. It is more likely with the screens LED backlight, but it is possible with a CCFL display like yours. There is usually 2 fuses (F7 and F8) that control the backlight. I don't have a motherboard of w700 to look at for more information. On most machines, they are on top of the room near the connection of the LCD screen. You can have one or two blown fuses. Most of the shops don't want to or cannot replace the fuses. You need good equipment. It is not a job for an iron solder 'Radio Shack'. Unfortunately, you can watch replacement motherboard, which is a big problem for this model.

• Tecra 9000 - no display on the LCD screen when you turn on

  I recently got a Tecra 9000 for cheap on eBay. I am experienced with the construction and repair of computers, but not so with laptops.

  The problem with this laptop, it's that do not display on the LCD screen when you turn on. It was just black, no backlight, nothing. I took the laptop all share, found no obvious problem. I had to turn it on and the screen lights up a few times trying to figure out the problem. Would it be a bad connection? Or something else?

  After getting it to start work, I'll try to start to put it back together and it stopped working again. I haven't not been able to reduce it to know if it's a bad connection or a card problem.

  Someone at - it suggestions? This is a problem for others here?

  As you describe the issue, I think it is somehow a bad connection or a damaged cable, because it does not work once you have disassembled the screen.
  Maybe you need to check all the cables, leading motherboard to the LCD and take a close look, maybe for a few scratches or strong curvature.

• Satellite M60: grey spots on the LCD screen

  It seems that I have a problem with my Satellite M60. I noticed a few more dark spots on the LCD screen. Looks like the screen is dirty (grey size spots about 5-6 pixels), but it seems to be not in the surface of the screen, but on the inside (the surface is perfectly clean) and, certainly, is not the problem of dead pixels or subpixels.

  Is it possible that there is little dust inside of screen? Is it possible to clean it somehow? Such a strange thing is covered by the standard warranty?

  Hi Fox

  Possible it s not a BIOS issue. Of course, I read the other case, but perhaps it s not the same question.

  But do not forget that you are using the good BIOS!
  A lot of users here uses a bad BIOS or bad BIOS procedure.
  In addition, the BIOS version performed from 14/09/06. That is why it s not very old updated.

• Vertical lines on the LCD screen of the Qosmio G20

  Hi all

  My Toshiba laptop shows a few vertical lines on the right side of the screen and the number of lines that appear are increasing day after day
  I have connected to an externel disply and Born no problem with that so I'm quiet sure that this is the problem with the lcd screen.

  My laptop is not so much in a guarantee period is this screnn is reapairable or not

  Please help me.

  Please see the attached images

  [http://picasaweb.google.co.in/meetabhilash/Toshiba?feat=directlink | http://picasaweb.google.co.in/meetabhilash/Toshiba?feat=directlink]

  regarding
  AERTS

  Why did you create a second thread on the same topic:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=139420

  It s easier than a single thread and, therefore, you must follow your first topic!

• Using the "back button" update for the LCD screen on the 60 d

  I used this method all the time, but now when I push on the development of the "back" button, it snaps as it is to take a picture, but no image is recorded on the SD card. When I look through the viewfinder and use the button "return" of discussion, it works perfectly.  I would like to know how to get back to the old method of development on the LCD screen, with the emphasis of the "back" button.  My Canon is a 60 d

  pixeltaker wrote:

  I used this method all the time, but now when I push on the development of the "back" button, it snaps as it is to take a picture, but no image is recorded on the SD card. When I look through the viewfinder and use the button "return" of discussion, it works perfectly.  I would like to know how to get back to the old method of development on the LCD screen, with the emphasis of the "back" button.  My Canon is a 60 d

  You must go to the menu and move the quick mode to Live Mode.  In fast mode, when you press on the "back" button, the mirror flips down (click) and the camera tries to focus.  He has not yet made the photo.  To take a photo, you must listen to the AF confirm beep, then press the shutter button.  Quick mode is in fact the "snail", in my opinion .  Read more about this on page 160-168 of this manual.