Replication with Ultra4 compatibility?
I have a ReadyNas Ultra4 (strandard not pro or something special). Looking to buy an another ReadyNas to save the exisiting Ultra4. RN31441E-100EUS looks like a nice, but both would be compatible to run replication?
Hello gazzaroo,
ReadyNAS Ultra 4 is an OS4 which does not come with free ReadyNAS Replicate. Please see http://kb.netgear.com/app/answers/detail/a_id/20841/~/readynas-replicate-faq for ReadyNAS Replicate info and license needed.
Here is a user manual that you may want to check before you buy: http://www.downloads.netgear.com/files/GDC/READYNAS-COMMON/ReadyNAS%20Replicate%20UM_10Jul2013.pdf
I hope this helps.
Kind regards
Tags: Netgear
Similar Questions
-
problem of installing active sync 6.1 64-bit with active sync. you have a known issue with the compatibility. you have a work around where the way to get these two together?
-
I'm on a mac. I have 2 different versions of mac operating systems running on 2 different hard disks, because of needs of customers with software compatibility. If I update a cc adobe programs in a single operating system hard drive system, it will affect older versions of programs cc in the other system of operating system hard drive?
If, as you say, they are completely separate installations on separate hard disks, each with there own version of PS for example, there should be no way that they could interfere with each other! I assume you are using a form any of Boot Manager to load a specific version of Mac OS x?
I did something similar at the start in a similar situation with client compatibility and not had a problem with either interfere with others!
However, you share the programs somehow between different OS, so that would be another matter.
-
replication with more of a naming context?
Hello
Well, I want to replace our very old OID with OUD installation (for database Oracle Net services) but I am facing a problem more.
I have 2 naming context dc =, dc = domain, dc = org and dc = everyone.
I created the domain controller = everyone with DOHAD (Configuration-> Create local naming context for database Oracle Net services).
I am able to query entries in each context.
So I decided to install another server for HA and using replication.
I installed on the second server with the same option and the same procedure (stand alone and for the Oracle Net database services).
I created the domain controller = everyone on the second server.
Then, I used dsconfig to create the replica server on port 8989 on two server.
I created the new domain of replication for my two contexts with dsconfig-> replication-> synchronization-> field of replication management provider menu-> create new domain of the replication.
The option list to show me the two areas.
But when I do a dsreplication-> enable replication, I don't have that cn = OracleContext or dc =, dc = domain, dc = org or cn = OracleContext, dc =, dc = domain, dc = org.
No trace of dc = world or cn = OracleContext, dc = everyone.
Is it possible to reproduce multiple naming contexts, and what is the procedure to do?
Even with the DOHAD and Topology Manager, I see that the domain controller = ma, dc = domain, dc = everyone.
Thank you
Hello
Well, I found why the replication was not working for a context.
I don't have to create an area of replication with dsconfig before.
-
Replication with multiple DBs in an environment
Hello
I wanted to confirm that replication is designed to operate in an environment of DB with multiple DBs (I want all DBs to replicate).
I want to use a DB for the storage of data and the other to maintain a State of enforcement. In this regard, I also wondered if it's possible/made sense to have a DB into memory and a DB drive in a replicated environment. I wish to use the DB in memory to store the State of the application and am ready to exchange the disc for a replication network sustainability sustainability if it makes me a performance boost.
Thank you
SanjitHi Eric,.
You can certainly use the replication of multilple databases by
environment.Have a mixture of databases in memory and on disk makes sense.
However, currently there is a bug that prevents the right
resynchronization of a client with the master in certain circumstances
When the databases in memory and on disk transactions are in use. (I
can describe this in more detail if you are interested) I am currently
working on a fix for this bug, for a future release.Have you considered the flag of the Middle DB_TXN_NOSYNC? Database
updates are generally not necessarily emptied the disk with each
transaction; rather, only the transaction log is normally empty
each time, so it is normally most of the performance. Using
replication with DB_TXN_NOSYNC allows you to "engage in the network."
and a very popular replication using Berkeley DB.This is, of course, all the work in the environment; It may not be
confined to the effects on the single database. If this is a problem,
You can of course use separate environments, but then you don't get
the advantage of having committed together as a single transaction updates.Alan Bram
Oracle -
520-1018 touchsmart PC with this compatibility issue with 64-bit Windows 8.1
Hello
I'm like the only one who, even to this Pc touchsmart 520-1018 with this problem of compatibility with 64-bit Windows 8.1
help me please I have a HP TouchSmart 520-1018 en PC since I installed 64-bit windows 8.1
I don't have a touch screen! and I can't find the driver on the web.
I have already contacted HP technical support, but without result, he makes PC and not the solution
This is the name of the driver that miss me
Touchscreen USB\VID_1926 & PID_0DBE & REV_0008 & MI_00
I have no solution for my touch screen again.
Help me please? Thank you
picsou61 wrote:
Hello
operating system itself Hp touchsmart 520-1018 or en windows 7 premiun?
I have install windows 8.1 is now 64-bit of the touch screen works more
I have already try installation Microsoft Windows Update to search for a driver for the screen tactile.mais it finds!
Oh what Hp Alor Windows 8.1 is not done for a PC Smart touch?
you work for HP and you can not even help or a good answer for this problem of compatibility with my PC
Desktop HP TouchSmart 520-1018 en serial number: (personal information)
Hewlett Packard Max resolution: screen size 1920 x 1080: 23.1 "(51 cm x 29 cm) Production date: 31/12/2001 Aspect ratio: input type 16: 9 video: digital signal DisplayPort"
Alor I leave you because you can't even answer me or help me
Windows 8.1 does not for the HP touchsmart PC.
Good bye
In fact the Touchsmart from HP computer you have is not supported for Windows 8.1. You have it backwards.
You may need to reinstall Windows 8 to regain use of the tactile function of your PC all in one.
I do not work for HP. See my signature.
-
Upgrade Vista to 7 the SafeMode problem with the compatibility report
I'm trying to upgrade my computer to Windows 7 after problems with Vista, and now I can start only my computer into safe mode now.
The update disc work until I get to the "compatibility report" in which it gives me the message: "the computer started using the Windows installation disc. Remove the installation disc and restart your computer so that windows starts normally, then restart the update."
This message appears in safe mode with networking, which was started without the installation disc inserted. I then restarted and booted from the DVD and tried to update again, and he gave me the same message (which makes sense because I boot from the disk).
This message occurs when I start in safe mode or safe mode with network.
Is there anyway to solve this problem, so I can go ahead with the update? Also, I can't start my computer in normal mode to respect the indications that gives me this message.
Hello
You can't go in safe mode- Close all running programs and open the windows if you are back on the desktop.
- Click on the Start () button.
- In the search box of the Start Menu () type msconfig and press enter on your keyboard - follow UAC prompt.
- The System Configuration utility opens
- Make sure the Normal startup is selected
- then click on the STARTUP tab at the top
- Make sure that the startup is disabled
- Apply - OK - then follow restart guests
If it does not do a startup repair
the link below is how to download and get a vista disk startup repair, which you can start from the
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below
http://www.bleepingcomputer.com/tutorials/tutorial148.html
to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start
It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu
Change boot order it do dvd drive 1st in the boot order
http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/
Windows 7 installation issues and ask in the forums of windows 7
http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=2
-
Hold of Windows 7 since Vista upgrade with Virgin compatibility report
My Windows 7 update Vista installation hangs with a blank compatibility report. In the report, the only way is to close the report/installation. Before installing, I ran the Windows 7 Upgrade Advisor report (link provided on the installation CD). This report has indicated that there is no problem of hardware compatibility. I uninstalled some software recommended by the report. I also disabled my antivirus software before you begin the installation. However, when perform the upgrade installation performs a further verification of compatibility that produces a blank report with the only option to close the facility. The report displayed on the desktop is also empty. How do I overcome this problem?
1. click on start, type msconfig in the search box and press ENTER.
User account control permission
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after the computer starts, check if the problem is resolved.
-
vSphere replication with suspension of guest OS
Hello
We are setting up vSphere 6 replication. For some VM (Windows 2012) we want to use the guest OS standby to be sure the application/database is not corrupted after a disaster. I noticed that whenever a replication begins and ends, the VM freezes for a few seconds. When I start a ping during a replication, I also see a couple (two or three) waiting times. I wonder if it is a behavior normal and if not, what can be done to improve it?
Thank you
It is the normal or expected behavior. This is caused by VSS sleep and the VM snapshot she needs.
If your application does not require the VSS suspension I would not recommend using it. Most modern operating systems and applications manage crash consistency very well (think of what happens to your application if the host the virtual computer runs on crashes or bluescreens BONES, the end of your application upwards with corrupted data?).
-
replication with different versions of vSphere vSphere
After reviewing the matrix of interoperability of products, everything "looks" good, but caring for a second opinion. See below:
Environment:
- vCenter 6 sites
- PSC external sites
- Protected site is vSphere 5.5 Update 2 or 3
- Recovery site is vSphere 6.0 U2
- vSphere 6.1 replication
- 6.1 SRM
Issues related to the:
Can anyone confirm the support in regards to the different version of vSphere protected and recovery site?
Are there related shades to have different versions of vSphere protected and recovery site?
We can successfully failover to the recovery site, reprotect VMs to protected site and be restored in a site protected without problem?
Different versions of vSphere are supported to recover protected site and as you have configured, it is recommended to have the new version on the recovering site. The reason for this and be careful about the different versions, has to do with the versions of virtual equipment. VMware ESX can run VMs with earlier versions of virtual hardware, but not later (came out after the version of vSphere). You want to make sure that your virtual machines will run on the host on the recovering site. If you are using a later version of vSphere to recovery, as long as you deploy new virtual machines when running it, or if you do this, you use a virtual hardware version that is compatible with the hosts what was your site protected, you will never come across the problem of trying to recover a virtual machine with the hardware version that is incompatible with vSphere.
Issues related to the:
Can anyone confirm the support in regards to the different version of vSphere protected and recovery site? -Yes
Are there related shades to have different versions of vSphere protected and recovery site? -See above
We can successfully failover to the recovery site, reprotect VMs to protected site and be restored in a site protected without problem? -Yes (see above)
Does make sense?
-
Veeam Backup &; Replication with VMWare
Hello everyone,
I have a question about Veeam Backup and VmWare:
Fact the license "vStorage API" (contained in the "essential package") is necessary to use Veeam Backup & Replication?
If 'Yes', I don't know why...?
We have in the ESX servers of my company 2 with 2 VM on each of them, with version 4.1.
We will buy VeeamBackup but I wonder if we should also buy essential Kit...?
Thanks to all the people who will give me some information about this,
And sorry for the possible mistakes (I am french)
Elise
Elise u useless any api for veeam to work.
Just install it as per instruction of veeam configure n you're all set
-
Windows Server 2008 R2 Service Pack 1 with esx compatibility 4?
I searched in the communities, the new vmware, the vmware knowledge base and I can't find any information about ESX 4.0 or 4.1 compatibility with Windows Server 2008 R2 Service Pack 1.
Is anyone aware of concerns or changes would be to break or otherwise affect BONE or ESX?
Hello.
HCL has the following entries.
Good luck!
-
Replication with only changed data?
We want to transfer changed data from Oracle to SQL server for Data Warehouse solution. It is one-way replication (from Oracle 10 g 2 to SQL server 2005). We are having about 100 tables that must be replicated with SQL server, but only changed(Insert,Update,Delete) data will be replicated.
Please let me know if you have any suggestions on how can I perform this replication and what tools I use.Of course, the major challenge will identify changed lines. Assuming that you don't have a way to make his already (i.e. a LAST_UPDATED_DATE column in all tables, a table of audit, changes, etc.), Oracle provides a few different technologies to do this. For heterogeneous replication, I tend to focus on Oracle Change Data Capture (CDC), which publishes the changes in a table that your replication process can subscribe to. That also tends to be more conducive to the load of nightly standard an DW. You can also use Oracle Streams either using streams and heterogeneous services or by writing your own code to apply the XML representation of a CRL to the SQL Server database. If you need real-time data, it is probably the best solution, but for most applications of data warehouse, it is probably overkill.
Once you can identify changed lines, - hand replication logic coding usually isn't too difficult. You can spawn probably most among the definitions of table on both sides (assuming these definitions to match). If you want to go out and buy an ETL tool, there are probably tools who can subscribe to CDC and push the changes to SQL Server. Oracle Data Integrator (ODI) would be the tool I'd look at first like most likely to be able to do. There are also third-party (i.e. Golden Gate) that sell software that mines redo logs and applies changes to all databases, but which tends to be quite expensive and a bit complex to install / configure / administer.
Justin
-
Problem with JavaScript compatibility effect background disco (works on IE but not FF)
This is the code:
r = 255;
g = 255;
b = 255;
flag = 0;
t = new Array;
o = new Array;
d = new Array;function hex (a, c)
{
t [a] = math. Floor(c/16)
o [a] = c % 16
switch (t [a])
{
case 10:
t [a] = « A » ;
break;
case 11:
t [a] = « B » ;
break;
case 12:
t [a] = « C » ;
break;
box 13:
[a] = t ';
break;
case No. 14:
t [a] = « E » ;
break;
box 15:
t [a] = « F » ;
break;
by default:
break;
}
switch (o [a])
{
case 10:
o [a] = « A » ;
break;
case 11:
o [a] = « B » ;
break;
case 12:
o [a] = « C » ;
break;
box 13:
o [a] = ';
break;
case No. 14:
o [a] = « E » ;
break;
box 15:
o [a] = « F » ;
break;
by default:
break;
}
}function ran (a, c)
{
If ((Math.Random () > 2/3 || c == 0) & & c < 255)
{
c ++
d [a] = 2;
}
on the other
{
If ((Math.Random () < = 1/2 || c == 255) & & c > 0)
{
c-
d [a] = 1;
}
any other [a] d = 0;
}
return of c
}
function do_it (a, c)
{
If ((d [a] == 2 & & c < 255) | c == 0)
{
c ++
d [a] = 2
}
on the other
If ((d [a] == 1 & & c > 0) | c == 255)
{
c-- ;
d [a] = 1;
}
If (a is 3)
{
If (d [1] == 0 & & d [2] == 0 & & d [3] == 0)
flag = 1
}
return of c
}
function disco()
{
If (flag == 0)
{
r = a (1, r);
g = ran (2 g);
b = ran (3, b);
hex(1,r)
hex(2,g)
hex(3,b)
document. Body.style.Background = "#" + t [1] + o [1] + t [2] + o [2] + t [3] + o [3]
flag = 50
}
on the other
{
r = do_it (1, r)
g = do_it(2,g)
b = do_it(3,b)
hex(1,r)
hex(2,g)
hex(3,b)
document. Body.style.Background = "#" + t [1] + o [1] + t [2] + o [2] + t [3] + o [3]
flag-
}setTimeout ('disco ()', 50)
}Can someone please tell me how to make it work in Firefox, too, because I'm designing a website for which I would love to put this as a background, but if I do, it must be compatible with all major browsers.
Seems to work here. Be careful when using % in c-> c 16% 16%. Otherwise %16 maybe get unescaped.
data:text/html;charset=utf-8, <html> <head> <script> var r=255,g=255,b=255,flag=0,t=new Array,o=new Array,d=new Array; function hex(a,c) { t[a]=Math.floor(c/16);o[a]=c % 16; switch (t[a]) { case 10:t[a]='A';break; case 11:t[a]='B';break; case 12:t[a]='C';break; case 13:t[a]='D';break; case 14:t[a]='E';break; case 15:t[a]='F';break; default:break; } switch (o[a]) { case 10:o[a]='A';break; case 11:o[a]='B';break; case 12:o[a]='C';break; case 13:o[a]='D';break; case 14:o[a]='E';break; case 15:o[a]='F';break; default:break; } } function ran(a,c) { if ((Math.random()> 2/3 || c==0) && c<255){c++;d[a]=2;} else{if ((Math.random() <= 1/2 || c==255) && c>0){c--;d[a]=1;}else d[a]=0;} return c } function do_it(a,c) { if ((d[a]==2 && c<255)|| c==0){c++;d[a]=2;} else if ((d[a]==1 && c>0) || c==255){c--;d[a]=1;} if (a==3) {if (d[1]==0 && d[2]==0 && d[3]==0)flag=1;} return c } function disco() { if (flag==0) { r=ran(1, r);g=ran(2, g);b=ran(3, b); hex(1,r);hex(2,g);hex(3,b); document.body.style.background="#"+t[1]+o[1]+t[2]+o[2]+t[3]+o[3]; flag=50; } else { r=do_it(1, r);g=do_it(2,g);b=do_it(3,b); hex(1,r);hex(2,g);hex(3,b); document.body.style.background="#"+t[1]+o[1]+t[2]+o[2]+t[3]+o[3]; flag--; } setTimeout('disco()',50); } </script> </head> <body style="height:100%;" onload="disco();"> </body> </html>
-
Problems with the compatibility of Lightroom 6CC and ElCapitan on older iMacs
When I upgraded to ElCapitan, Lightroom CC seems to continue to work without problem. Then I did the first update and since then, I have not been able to use development module in the program. I posted these problems on the Lightroom forums (see link below), but it is clearly an Apple problem, is not a problem of Lightroom. Lightroom people think it's the graphics processor in the older iMac which poses problem, but as I said above, it happened on the first update, not on the initial installation. There is now another update on hold, and I fear that other programs will no longer work. Apple made contact with Lightroom on those very real inconsistencies and what is their consensus? This is a serious problem for a person using an older iMac and photo editing using Adoble products. For a fuller discussion, please see the link below for the Lightroom Forum (information was also posted on the Forum from Adobe).
Information on my version of Lightroom and my computer are in posts on the forum.
Thanks to anyone who can help solve this problem.
Should I worry about several incompatibilities with the new pending upgrade to El Capitan?
FWIW, iMac 24 "early 2009 may have at least 512 KB of VRAM (typical models
only had 256 K). The specification of Lightroom CC, minimum is 1 GB of VRAM.
Operation on this machine was borderline at best and probably just lucky it worked at all.
In addition, a huge impact on the works of Lightroom is the amount of RAM installed. With
El Capitan installed, try to run Lightroom CC with anything less than 8 GB will be
issue (despite what can say Adobe).
Maybe you are looking for
-
Can I copy my profile of one copy of Firefox to another?
I have Firefox 42 perfectly configured on a computer Windows 10. Installation of others is a mess. It's on another computer Windows 10. My user name and directories are identical on each. I don't want to debug ALL the symptoms I have now. It would be
-
My iPhone 6 is disabled and I would like to save it on iTunes but it asks for my password.
My sister locked my iPhone while I was out for the weekend, I connected to iTunes (which has my backup to iCloud) hoping to save, but it asks for my code to access/Word. I have spent a lot of time watching the guides and support systems different, bu
-
Portege R830-1EE: supervisor / Bios - lack of prompt startup or login password
Hello yesterday, I put the password of the bios/supervisor. When I turn on the laptop, I can see the Toshiba - leading screen innovations and then it darkens and none is unbootable. HDD / fan / graphics etc works - but I don't see anything or do some
-
Satellite A100 - recovery does not work
Hello I own a Satellite A100 with XP that I want to format my HD and reinstall everything from the original recovery disc supplied with my pc. When I inserted the recovery disk and restart, press F12 and boot from the CD/DVD, it load ramdrive and the
-
Hello I am new on this site. My question is how can I change my printer on my OfficeJet 6700 e-mail address. Thank you