Replicator port and WQHD resolution

Similar Questions

• Tecra A10 - BSOD with Port Replicator Port and external monitor

  Hello

  I have a Tecra A10 PTSB0A 05C023 with XP SP3 on an Express Port Replicator, running to an external monitor (1280 x 1024) on VGA. Works fine for a while then seems BSOD spontaneously when not in service - possibly when screensaver or powersaver comes into play.

  BSOD is a STOP 0x0000007E in igxpmp32.sys

  I downloaded and installed the latest video drivers intel from the Web from Toshiba - 6.14.10.4953 site

  Any help or advice by eliminating the BSOD would be greatly appreciated.

  Kind regards

  Rhys.

  Hi mate,

  I asked Google to igxpmp32.sys and this file belongs to the Intel display driver. In your case, I recommend the page Intel searching for the latest display drivers.
  [www.intel.com]

  Also have a look on the Toshiba site for a BIOS update, or you have already installed the latest version of the BIOS?

  In addition, it would be interesting to know what Port Replicator you use exactly. Can you post the model number?

• Replicator port and battery charge problems

  Model name 250410U Description ThinkPad Advanced Mini Dock with U.S./Canada/LA cord

  Above is the name of the model and description of my docking station for my new T500. I recently had the T500 during his first trip of the road since the purchase. On my return, I discovered two things:

  1. the T500 will not start when I connect to the docking station and then turn it on. It does not even try to access the HD. It sits right on the Welcome screen. If I push the blue ThinkVantage button, nothing happens. However, if I leave the T500 to start so that undocked, then place it on the docking station, it works fine with one exception...

  2. my battery does not load while on the docking station, but will charge when connected via its own power supply. I tried to do the reset of battery meter, but it did not do anything.

  Have I not the wrong dock? The seller assured me it was compatible. If it is not the right one, you know that I need?

  Thanks for the help.

  Your question on reproducing the restart got me thinking to see also if the battery charge always not moored. He wouldn't. I removed the battery and clean the son with the air canned and put it back into the laptop. It started to load immediately while not anchored. When I rooted the laptop, continuous load. I then re-tested the ability to start then only docked and was able to reproduce successfully.

  Thanks for the help. Sorry, that was just some kind of anomaly that I attributed by mistake to the docking station.

• Problems with an external monitor with the Port Replicator III and M100

  Hey all.

  I just returned from a trip where I took my laptop. Plugged into the Port Replicator port, started and everything was fine. Then after an hour or two, the monitor stopped receiving a signal. I repositioned the laptop and everything was good again. He then loses signal once again, and I was not able to get a signal via the port replicator since.

  The monitor works fine through the hole at the rear of the M100.

  I checked the pins on the Port Replicator port and portable, none folded and tried to clean any dust etc. Still no signal to the monitor.

  Someone has ideas of how to do to solve this problem?

  Jamo

  Hello

  The Toshiba 3 mobile extension is responsible for the good condition of the duplicator 3 market. Try to reinstall this utility and also check the page of the Toshiba driver for updates.

• Portege R500: external monitor does not work with the Port Replicator Port 2 and DVI

  I have a Portege R500 running Vista with a slim Port Replicator II and digital monitor Viewsonic.
  I connected the monitor to the DVI port on the port replicator and got it to work OK.
  Press fn + F5 would switch between the computer screen and the external monitor.

  Then it stopped working, and I can't make it work at all. F5 recognizes just the laptop screen.

  If I connect an analog display, it is fine, and I can pass between the two screens without difficulty.

  The strangest thing is that, if I reboot when the Portege R500 is docked, the digital monitor begins by displaying the boot sequence, but then the signal is lost as soon as the screen stops the display of the progress (in low resolution) bar.

  I spent an hour on the phone to support Friday, and he made me nowhere.
  They finished by saying that he should never have worked! So what is the DVI port because then?

  Any ideas?

  David

  Connect your monitor directly to your laptop and see if it is recognized and you can go through FN + F5 between the two views.
  If it works, then connect with port replicator, and then try again.

  It's probably best if you reinstall display drivers. Maybe there are new too on the download page.

• Express Port Replicator II and Tecra A10 - 12Z - only the power and LAN

  Since my Toshiba T3600CT I received with docking station, I discovered that I have a docking station. In the meantime, I had a small Sony who had no docking station, for which I got one of the first USB docking station and since then I've seen always to get laptops with docking station.

  But this time something went really wrong, the Toshiba Express Port Replicator II PA3680E-2PRP provides only power and LAN. There is no power in the USB ports, so no serial port or the sound, and DVI and VGA are also disabled.

  All these ports work fine on the Tecra A10, but not on the docking station.

  Of course, it is nice to have the power and LAN, but not when I expected too much of everything.
  So I was wondering if anyone has had a similar problem, it is like upgrading the BIOS for me who have not installed all the necessary software, or is it a fuse or something I could fix myself or is it a faulty docking that shouldn't have left the factory?

  Hello

  What's your Tecra pre-installed with original recovery image?

  When the laptop is preinstalled with recovery image simply connect compatible laptop Toshiba docking station and all the devices connected to the docking station will be recognized correctly and all available ports should work fine.
  Is that a Port Replicator basically "replica" ports on the laptop.

  On this virtual path, we cannot say that this port is 100% OK. What can you say about it? you bought is used a?

• No Audio or USB ports with Port Replicator 3 and Portege R600

  I have a problem between my Port Replicator 3 (PA3681E-2PRP) and my Portege R600-13 X (Win7 Pro 32-bit). Everything has been working well for the past few months until a week ago. My PC has developed a problem then that plugged on the Port Replicator, it will not recognize something new that is connected to the USB (two PC & Replicator ones) ports, the Replicator audio output no longer works and the PC hangs during shutdown. Everything is OK with the PC when booted without the Replicator, but as soon as it is connected to the port replicator, in this case.

  I tried looking for information about this problem, but nothing helps... Any help to fix this would be greatly appreciated as it is to set up a business and I need it to work properly.

  A few things to try:

  Reinstall the Toshiba Value Added Package.
  Use system restore to restore Windows to a previous state.
  Check the connector for docking station for damage.
  Back up your data and perform the recovery.

  If its still does not, then I would send the laptop and the Port Replicator Port for an ASP for repair.

• USB Port Replicator II and IEEE1284 - Windows XP

  I have a replicador (Px1098e-1prp) port and it is impossible to operate LPT (IEEE1284) however in Windows 98 works perfectly. I have a M30-801 and I also proved in several computers, and it won t work with Windows XP. How can I do works?

  Thank you!

  Hello

  The only thing I can tell you is that you need to check the user's manual and it is described how you set up the printer in Windows XP Home edition. You can find it on page 24 (English).

• Portege R930 - 1 d 0 + Replicator port dual monitor supported high speed II - taken

  Hello

  Crossing a Portege R930 - 1 d 0 high speed port replicatior II.
  Is it possible to dual-display output?

  Thank you

  You hear the internal + external display by the dual display or you mean two external monitors?
  Speed Hi II port replicator supports the RGB port and display port and HDMI port but (display port and HDMI) can not be used simultaneously.

  You can use the internal s for computer laptop HDMI port and for example a the Hi speed port replicator II ports to connect an external monitor.

• Replicator port or docking station for Satellite L20

  Hello
  Can someone tell me if a Replicator port or docking station, there are satellite pro L20 model?
  I searched around, and every time I check the specifications of compatibility, it is usually a Toshiba laptop or 2 and often some of the satellites 'L' series, but no mention of the L20.

  Thanks for any help you can give.

  Hello

  I agree with Akuma.
  You may not use a dock under Satellite L20.
  If you take a glance at the bottom of the device, you will not find a necessary home slot that would be needed to connect the docking station.

  But of course you can use some sort of port connected to the USB port replicator.

  See you soon

• My HP 14 laptop is not recognizing the usb ports and wifi at startup.

  During the last few days I been dealing with the issue that my laptop does not recognize the usb ports and wifi. After several reboots, it works fine. My drivers are up to date, so I don't know why, I'll have this terrible problem.

  Welcome @hildergarn,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I understand that you have a problem with your Wi - Fi and USB ports on your laptop from HP.

  My first suggestion would be to use the wireless network troubleshooting and Internet tool. At the bottom it will ask you questions to help you diagnose the problem.

  Please take a look at this great Charter called troubleshooting wireless network and Internet. This document will help you to solve the problem of Wi - Fi.

  Have you tried to restore the BIOS?

  Have you tried to connect directly to the Modem/Router?

  You have uninstalled the driver in Device Manager?

  Please try to uninstall the driver in Device Manager by using the following steps:

  • Go to the Device Manager.
  • Expand network adapters.
  • Right-click on all NICs individually.
  • Click on uninstall.
  • Restart the laptop twice.

  How many devices you try to connect?

  What you are trying to connect via USB?

  Are - what you happened to try to use the HP Support Assistant?

  Here is a link to the HP Support Assistant, if you not him have not yet tried. Simply download and run the application and it will help with the software and drivers on your system that need updated.

  Here are other troubleshooting steps that may help too. If the USB device does not appear in Device Manager, then it might be a question of power requirement. Unplug the machine and perform the following steps until the device is detected:

  • Reboot the laptop

  • Plug in and wait five seconds.

  • If the device does not appear, try connecting to another USB port.

  • If the USB device is displayed in Device Manager after you connect the cable to a different port, then uninstall and reinstall the software of USB device driver.

  If the device is not recognized in any port, unplug it and go to the next step.

  • Open the Device Manager.

  • Double-click Bus USB controllers,

  • Double-click on a USB root hub,

  • Click the Power tab

  • Click on properties of power supply (if it is displayed).

  Devices need that are connected to the hub are shown, as well as the power they have. If the total displayed power is more than 500 mA, remove the devices and use a hub powered.

  • Continue looking at the properties of the power of each USB hub. If the total power required exceeds the total available power for the hub, then remove a device on this hub to a decrease in the number of consumption.

  • Plug in and wait five seconds. If the device is not recognized, unplug and go to the next step.

  Please note; Remove USB cables at high speed that are more than 3 m (9.8 ft) in length and use cables at high speed that are shorter than 3 m.

  Source: troubleshooting USB connections - please look at this document and follow all the steps in it.

  When we came to a resolution, please share what has worked for you with others by marking this post as an acceptable Solution. If you do not want to show your appreciation for my efforts today, please take a second to click the Thumbs Up button below.

  If please re-post and let me know the detailed results of all the troubleshooting steps in this post. Could you please provide me with your model number (How can I find my model number or product number?) also.

  Can't wait to hear from you!

  Have a great day!

• my phone has port and new battery and still will not hold a charge

  my phone has port and new battery and still will not hold a charge

  What do you mean 'there port and new battery? If someone other than Apple has opened and replaced the things, it is now unbearable.

• my macbook pro red on heart Tel port and no sound, what I can do to fix

  my macbook pro red on heart Tel port and no sound, what I can do to solve?

  The red light in the headphone when your Mac is convinced that he took an optical connection via this port.

  You need ti insert and remove the headset plug a dozen times to convince him to change the setting of metal cap and disable Optics (the red light is the optical sound).

• Help! I need to connect my iPhone5s to the stereo, but it has only one usb port and whenever I connect it, it connects? Is there a setting on my phone, I need to change? Help, please

  Help! I NEED to connect my iPhone5s to the stereo, but it has only one usb port and whenever I connect it, it connects? Is there a setting I need to change on my phone? Help, please

  You will need something like that and a micro USB to USB cable

  http://www.Apple.com/shop/product/MD820AM/A/lightning-to-micro-USB-adapter

• H8-1223: card mother HP Angélique Label of ports and diagram

  Put I upgraded my computer and I have a upgrade my card mother-M3970AM-Hp (Angelica2) in an Obsidain of Corsair 350 d case.  The problem is the case connectors are labeled, but aren't the ports on the motherboard.  I need to have the labels on the ports and connectors of my Board of Directors.  The case conectors are: Power SW, Pwer Led - and Power Led + and SW Reset.  I need information on the place where to connect or if these connectors at all.  I'll try to send some photos if I can understand how this Bluetooth to my cell phone.

  

  On the left is the cornerstone of HP mother.  I wanted you to see the ports that are on the map. PSWD HP LPC.  The line is the Corsair Obsidian Series 350 d connectors.  How can I connect these?  Or do I really need them?