Report compilation error

Similar Questions

• Compiler error. Report to Technical Support OR: err c = 0xF1 ufppushop

  Compiler error. Report to Technical Support OR: err c = 0xF1 ufppushop

  When recording / runing a vi that performs calculations in a node formula containing several if and a switch statement. (LV6.1, WinNT)

  I solved the problem: the compile error occurred because a single formula node entry was an enum.
  When you insert a cast to digital, the problem has been resolved.

• LabVIEW FPGA CLIP node compilation error

  Hello NO,.

  I work on an application for my Single-Board RIO (sbRIO-9601) and faced with a compile error when I try to compile my FPGA personality via the ELEMENT node.  I have two .vhd files that I declare in my .xml file and all at this point works great.  I add the IP-level component to my project and then drag it to the VI I created under my FPGA.

  Within the FPGA personality, I essentially have to add some constants on the indicators and entries CLIP to my CLIP out and attempt to save/compile.  With this simple configuration, I met a compilation error (ERROR: MapLib:820 - symbol LUT4... see report filling for details on which signals were cut).  If I go back to my VI and delete indicators on the output (making the output pin of the CLIP connected to nothing), compiles fine.

  I've included screenshots, VHDL and LV project files.  What could be causing an indicator of the output of my VI to force compilation errors?

  Otherwise that it is attached to the output ELEMENT, a successful compilation...

  

  After that the output indicator comes with CLIP, compilation to fail...

  

  NEITHER sbRIO-9601
  LabVIEW 8.6.0
  LabVIEW FPGA
  Windows XP (32-bit, English)
  No conflicting background process (not Google desktop, etc.).

  Usually a "trimming" error gives to think that there are a few missing IP.  Often, a CLIP source file is missing or the path specified in the XML file is incorrect.

  In your case I believe that there is an error in the XML declaration:

  
    1.0
    RandomNumberGenerator
   
      urng_n11213_w36dp_t4_p89.vhd
      fifo2.vhd
   

  This indicates LV FPGA to expect a higher level entity called "RandomNumberGenerator" defined in one of two VHDL files.  However, I couldn't see this entity in one of two files.  If urng_n11213_w36dp_t4_p89 is the top-level entity, edit the XML to instead set the HDLName tag as follows:

  urng_n11213_w36dp_t4_p89

  Also - in your XML, you set the 'oBits' music VIDEO for output as a U32, however the VHDL port is defined as a vector of bits 89:

  oBits: out std_logic_vector (89-1 downto 0)

  These definitions must match and the maximum size of the vector CLIP IO is 32, so you have to break your oBits in three exits U32 output.  I have added the ports and changed your logic of assignment as follows:

  oBits1(31 downto 0)<= srcs(31="" downto="">
  oBits2(31 downto 0)<= srcs(63="" downto="">
  oBits3(31 downto 0)<= "0000000"="" &="" srcs(88="" downto="">

  Both of these changes resulted in a successful compilation.

  Note: The only compiler errors when you add the flag because otherwise your CUTTING code is optimized design.  If the IP is instantiated in a design, but nothing is connected to its output, it consumes all logic?  Most of the time the FPGA compiler is smart enough to get it out.

• LV 2011 (and 2012 LV) compilation error. Size not valid in _InstSize: 21

  I created a Subvi in LV8.5 to manage events UI outside a main vi. The Subvi gets control references who are registered for the events, through a queue that all actions are sent to a consumer case, nothing complicated. Everything works fine in LV8.5, but now I got all LV2011SP1 on a Windows 7 64 bit and I still get the same error:

  "Compile error. Report this issue to National Instruments Tech Support. Invalid size in _InstSize 21 "

  which appears 3 times. I tried to open the same code also in LV2012, same error... When you try to isolate the problem, I discovered that by disabling the code in 3 cases of greater consumption that I can get rid of the warning, but then I can't reduce the problem to one...

  Any ideas?

  Yes, the thing to put 'problem' labview code into a Subvi its own helped me as well.

  My speculation is that it forces the choice of another compiler (without the bug) path when compiling the source of the LV.

  I think you should file a bug report using the pages of http://ni.com/support .

  In this way we will have better tools in the future.

  BR,

  / Roger

• DMA FIFO of FPGA compilation error

  Hello

  I have a cRIO 9074 with FPGA. I tried a simple piece of code to learn how to acquire the data that is generated on the FPGA at a rate of 10 KHz and transfer it to the host VI to treat later in offline mode. However, I meet this compilation error when you compile the FPGA VI base containing a node to write FIFO (photo of the VI attached below). In compiling the report, it is said that there are 256 RAM Block used (the total number is 40), so an error has occurred. The error notification of exact compilation from Xilinx report is reproduced below:

  # From the PAM program

  # o toplevel_gen_map.ncd - intstyle xflow-calendar toplevel_gen.ngd map

  toplevel_gen. FCP

  #----------------------------------------------#

  "Target part using" 3s2000fg456-4 ".

  Design of mapping in the lut...

  Guided running of packaging...

  Running based on the delay of packaging of LUT...

  ERRORack:2310 - type compositions "RAMB16" too found to adapt to this device.

  ERROR: card: 115 - the design is too large to fit the device.  Please consult the Design summary section to see what resource requirements for your design exceeds the resources available in the device. Note that the number of slices don't notice it that their packaging could not be completed accurately.

  NOTE: A file NCD will be always generated to allow you to examine the mapped design.  This file is intended for evaluation use only and will not be processed successfully by means of BY.

  Mapping performed.

  See the report of map file "toplevel_gen_map.mrp" for more details.

  Problem encountered during the packaging phase.

  Summary of design

  --------------

  Error number: 2

  Number of warnings: 125

  ERROR: Xflow - card program returned the error 2 code. Aborting the workflow execution...

  Bitstream not created

  Time history analysis

  What does that mean? How can I fix this error?

  Thank you

  Bogdan

  Hey,.

  Have you already tried to reduce the size of the FIFO memory?

  Christian

• Outside regs, reg 1239 compiler error

  I installed LV2009 and trying to open the version 8.6 vi.

  I get a message "compilation error. Report this problrm to Technical Support from National Instruments. off-regs - no release candidate has found, reg 1239! »

  32-bit client of Labview on Win 7 64 bit and Win Server 2008 64 bit give the same error.

  The attached code.

  Technical support NOR suggested installation LV 2009 service pack 1, which fixed the problem.

• compilation error

  Hello when I try to compile my code it gives me the compile error!

  I've seen this page

  http://digital.NI.com/public.nsf/allkb/311C18E2D635FA338625714700664816

  and I tried a lot to adapt to my code! reduced use of the lut of 107 to 101%, but he actually uses Interpolation spline 4times separately to move 4 motors! that it overlooked,

  I also enclose my code!

  Please take a look at reduced fpga4 and rt4reduced! N give me suggestions how can I reduce space, and if this compilation error is indeed bcz of space! This is the maximum can reduce the code! all Motors must move simaltaneously so I can't think about using a spline function unique move one, then the other engine!

  Please find the code and the report of the attachmenet1

  Sara

  
  

• Today I received a phone call from 'Human IT Solutions'. The operator said that I had reported an error and asked me to log in

  Original title: ERROR REPORT FIX - HUMAN IT SOLUTIONS.

  Today I received a phone call from 'Human IT Solutions'.  The operator said that I had reported an error and asked me to log in and follow his instructions, as it was a very simple matter to deal with.  I typed in the flag of MS, "rt" track: this opened the window "run" in which I typed in 'eventvwr' followed by 'OK '.  This opened "Event Viewer".  At this point I told him I was not willing to go far and he didn't send me the "fix."  He said that his company had no authorization to send emails and our conversation ended.  I tried to inform Microsoft, but of course all their facilities help for XP are now US only and I couldn't find any way to inform them (I think they should know, and anyway, if it is a genuine appeal, it might be good to have).  Anyone got any ideas on the question of whether I have done the right thing or how to say MS?

  ADF

  Original title: ERROR REPORT FIX - HUMAN IT SOLUTIONS.

  Today I received a phone call from 'Human IT Solutions'.  The operator said that I had reported an error and asked me to log in and follow his instructions, as it was a very simple matter to deal with.  I typed in the flag of MS, "rt" track: this opened the window "run" in which I typed in 'eventvwr' followed by 'OK '.  This opened "Event Viewer".  At this point I told him I was not willing to go far and he didn't send me the "fix."  He said that his company had no authorization to send emails and our conversation ended.  I tried to inform Microsoft, but of course all their facilities help for XP are now US only and I couldn't find any way to inform them (I think they should know, and anyway, if it is a genuine appeal, it might be good to have).  Anyone got any ideas on the question of whether I have done the right thing or how to say MS?

  ADF

  ADF, I received today a similar appeal.  When I questioned his information on the company, he was very defensive and said "I have no cold calling, I'm in East London" I asked him to give me the name of the software MS causing errors, during which he compiled a long list of file extensions and avoided the question.  When I asked her name and phone number so I can get my husband to call him back, he began to read a number on phone, but the figures '0-1', the line was cut off.

  I'm sure you made the right choice in putting an end to the conversation of what I lived today.  I have no idea how you would report to Microsoft, but wanted a response to you here to support your actions!

• Filing of report generation error

  Hello

  I get the following error message when you try to generate a report of my filing of statement:

  

  In the log file, I see these lines:

  2016-02-13 10:17:12, 995 [Thread-287] ReportsGenerationDialog - exception Reporting scheme report generation - ERROR ORA-29282: ID of person invalido

  ORA-06512: em 'SYS. UTL_FILE", line 878

  ORA-06512: em 'REST. PKG_OSDM_UTILS', line 5634

  ORA-01403: dados nao found

  ORA-06512: em line1

  This happens to be it, if I put a directory object or a normal directory in the directory path.

  I'm doing something wrong?

  Here is a screenshot of the dialog reports:

  

  Thank you

  Wolf

  Hi Wolf,

  I have re-attached package PLSQL.

  Re-compile the body again and you shouldn't get NPE more.

  As it comes to workaround, the downside is that not all PDF diagrams will be generated. In the first place, there is a problem with them, and it will be fixed in the next version.

  The yard will be also addressed.

  Concerning

• Deployment of the EJB2 to Weblogic 12 c gives a JDT compiler error

  Hi all

  I am building a business application using Java JDK 1.8 and I'm trying to deploy it to a 12 c Weblogic application server.

  During the deployment, I get a:

  JDT compiler error!

  In the newspaper all the EJB is listed with errors such as

  <>SomeEJB_a2xvpw__WebLogic_CMP_RDBMS_otherEJB_Set.java compilation error: SomeEJB_a2xvpw__WebLogic_CMP_RDBMS_otherEJB_Set type must implement the inherited abstract method Collection.parallelStream)

  and at the end:

  at weblogic.ejb.container.ejbc.CompilerForJDT.compile(CompilerForJDT.java:49)

  	at weblogic.ejb.container.ejbc.CompilerForJDT.compile(CompilerForJDT.java:49)
  	at weblogic.ejb.container.ejbc.EJBCompiler.doCompile(EJBCompiler.java:237)
  	at weblogic.ejb.container.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:346)
  	at weblogic.ejb.container.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:314)
  	at weblogic.ejb.container.deployer.EJBDeployer.compileJar(EJBDeployer.java:429)
  	at weblogic.ejb.container.deployer.EJBDeployer.compileIfNecessary(EJBDeployer.java:355)
  	at weblogic.ejb.container.deployer.EJBDeployer.prepare(EJBDeployer.java:723)
  	at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:439)
  	to weblogic.application.internal.ExtensibleModuleWrapper$ PrepareStateChange.next (ExtensibleModuleWrapper.java:295)
  	to weblogic.application.internal.ExtensibleModuleWrapper$ PrepareStateChange.next (ExtensibleModuleWrapper.java:285)
  	at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:42)
  	at weblogic.application.internal.ExtensibleModuleWrapper.prepare(ExtensibleModuleWrapper.java:109)

  I added the property-compiler-javac in the additional EJB Compiler Options, but seems to have no effect.

  WebLogic.jar is in the classpath

  Any suggestions welcome, thank you very much in advance.

  I found a known issue with JDK8

  Default methods are reported as not implemented within the JDT compiler error.

  Bug 18729264 - GA JDT JAVA8 MAY FAIL WITH JDK8 DURATION AND "-SOURCE" / "-TARGET" LESS than 1.8

  Apply the patch and let us know if the problem persists...

  Thank you

  Vijaya

• 2015.1 Media Encoder / first - can not restore unknown, compilation error

  Hello

  I do an edit very basic multicamera premiered with only a Lumerti color filter and a Multiband Compressor filter on the audio.  I can't get something to export into Media Encoder successfully.  I keep getting unknown compilation errors at different locations along the export.  I did the same type of work before the update and it worked perfectly.  I tried a lot of different codecs and formats - same problem.  I'm on a Mac Pro end of 2013 on 10.11.2 with AMD D500s.

  Is there any solution for this?  I'm not asking the program to do complicated things where should be unknown random compile errors.  I can't even help out it is because newspapers don't offer any information.

  Thank you!

  Chris

  Neil et al..,.

  I went down a long conversation with Adobe and they made me know that my Mac specific Pro with D500s driver with the Open CL Mercury GPU Rendering problems.  Reported memory is not updated quickly enough, and absence of export.  Apple was supposed to fix 10.11.2 but didn't.  They will look into the problem more.  I just had this problem on Mutli-cam since this type of rendering is more intensive than a regular calendar GPU.  The solution uses the rendering software until Apple fixes the drivers.

  Thanks for the help Neil!

• Whenever I open Firefox, I had a small window to appear and reports following error "TypeError; Components.classes['@ [' softage.ru/Skype FeExtensions; 1] is undefined

  Whenever I open Firefox, I had a small window to appear and reports following error "TypeError; Components.classes['@ ['softage.ru/Skype FeExtensions; 1] is undefined

  Remove/disable Skype add-on

  Uninstalling the modules

  • https://support.Mozilla.com/en-us/KB/uninstalling%20add-ons

  Cannot uninstall an add-on

  • https://support.Mozilla.com/en-us/KB/cannot%20uninstall%20an%20add-on

  Check and tell if its working.

• Firefox answers more frequently. I have several reports of errors but don't know what to do with them.

  I have several reports of errors, but I don't know how to reach them. I hope someone can help me with this all out.

  Have you checked this thread?
  https://support.Mozilla.com/en-us/questions/859406

  I had a similar problem, and he treated this thread.

• Toshiba 55VL963 - TV USB function reports write errors

  Hello

  I have 55vl963 TV with latest firmware 6.9.MD.1

  I'm trying to get lists of channels and other settings using the function of the cloning Hotel.

  However, it seems the TV to USB function often reports write errors (or sometimes ends successfully, but generates corrupted files).

  I tried different media USB, formatted in FAT16 or FAT32.

  Thanks for any help to solve this.

  > I'm trying to get lists of channels and other settings using the function of the cloning Hotel.
  The TV seems to support two USB 2.0 ports.
  Have you checked this Clone Mode using different USB ports?

  However, I guess that data write the problem could be related to the used USB flash memory key.
  Even if you have tested some different USB media, I guess that there are no other possibilities as to test another stick of memory.

• website valid W3C, initially no error reported by the developer toolbar. But by right clicking (giving the menu validation), the toolbar reports two errors: width and height. Despite the fact that each page is posted! The forum for the toolbar, this i

  website valid W3C, initially no error reported by the developer toolbar. But by right clicking (giving the menu validation), the toolbar reports two errors: width and height. Despite the fact that each page is posted! The forum for the toolbar, it's supposed to be a browser error. So, how can it be fixed? I use FF 3.6.6

  This has happened

  Each time Firefox opened

  is after upgrade to 3.5?

  http://chrispederick.com/forums/viewtopic.php?PID=8239#p8239

  You create a new profile and install only the extension Web Developer, as recommended Chris?