report data taking time

Similar Questions

• OfficeJet 6700 premium print date and time on the fax history report

  Running Windows 8.1 on my OfficeJet 6700 Premium AIO H711n fails to print the date and time on the historic report of the fax.  I need this information to check the box of cylinder head of the fax the documents have been sent.

  Hello dcflorida,

  I did not the 6700 but on another machine, I had to 'reset', time and date in the printers preferences.

  If you haven't done it yet, go to Settings/preferences/time and Date on the All in One printer set up (once again if necessary).

  IF your machine does not have the time / date on the history report, it includes it in the Confirmation page?

  Here is the link to the Manual too.

• OfficeJet 6700 fax reports do not date or time display

  After sending a fax using the Officejet 6700, confirmation of reports do not include the date or the time of sending.  I was unable to find this addressed in the FAQ or troubleshooting data.  Tel/fax line is not connected at all times.  Suggestions?

  Hello

  First make sure you have the latest firmware for your printer is installed:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-106542-8&cc=us&DLC=en&LC=en&OS=4158&product=5058338&sw_lang=

  So make sure that the exact time Date & are comigured by going to settings > preferences > Date and time, ensure both the date and time are set correctly, then check for the difference.

  Shlomi

• Dear all, in the follow-up to Massage exhange 2010 there is no option for selective date and time if we want to follow and check the delivery for 2 months mail report, then how, please guide

  Dear all, in the follow-up to Massage exhange 2010 there is no option for selective date and time if we want to follow and check the delivery for 2 months mail report, then how, please guide

  Hi Anandsable,

  The question you have posted is based on Exchange 2010, it is better suited in the Exchange Server forum. Please post your question in the following forum:

  http://social.technet.Microsoft.com/forums/en-us/category/ExchangeServer, exchangeserverlegacy.

  Hope the helps of information.

• is it possible to display the Date and time in the address bar or a clock window constantly

  I need to take screenshots with date stamps and time using the script of iMacros. Everything by taking screenshots iMacro don't add taskbar windows for the date and time. It takes screenshots of browser. Is it possible to display the Date and time in the address bar or a clock within the tab browser constantly to capture the screenshot with time stamp through iMacros
  I added the big clock background Add-ons, but it is visible to new tabs.

  Badly looking for help and it will be really appreciated...

  Try this extension:

  • https://addons.Mozilla.org/firefox/addon/simple-clocks/
  • https://addons.Mozilla.org/en-us/Firefox/addon/FoxClocks/

• How to set the date and time so it appear on my fax

  I sent a fax today and the report that was printed after ward did ' t have the correct date or time - how to reset the time and date on the HP officejet 6500 has more all-in-one.

  Thank you!  How simple. Here the help section on HP could help.  I must have spent over an hour tring to figure it out on my own and search on the HP website.  Now, I know. Thank you once again!

• Need to reset the date and time

  My system has decided that it is Jan.4th 2004 and everytime I turn it on, I need to reset the date and time. How can I cure this?

  Packard Bell's Web site does not recognize the 'ALT' CO2 as a model.  Despite this, however, PB seems only to provide a 'generic user guide"which is not described the replacement of the motherboard or the battery at all.  In fact, the only thing he has to say about batteries is be careful how get rid you of them.

  Your computer is a laptop or Desktop/Tower computer?

  If you have a desktop/Tower computer, you can look here--> http://www.uktsupport.co.uk/pb/mb/pbmb.htm and see if you can identify the motherboard used in your computer.

  However, if you have a desktop/Tower computer, the best thing to do is to unplug your computer from the network and, taking the precautions perfectly static electricity, open the box and inspect the motherboard yourself.

  A newish mother on the above site, http://www.uktsupport.co.uk/pb/mb/cosmos.htm, shows the battery on the center line vertical and more to the left.  It's just below the 3 PCI slots.  If you have something like that, a Visual inspection should be enough to see how to remove it.  The type of battery will be engraved on the top of the battery.  In the photo, it looks like a model CR-2032, but there are several models of battery on this size.  Battery CR-2032 (or equivalent) is available in almost every pharmacy chain in the United States as well as online and stores like Radio Shack.

  The page for an old motherboard, http://www.uktsupport.co.uk/pb/mb/450.htm, indicates that the battery is a '3.0V DC Lithium soldered to the motherboard"and if that were the case, it would probably be something that you wouldn't do yourself.  However, this thread is to think that all you have to do for this particular mobo is actually finding the right type of support plug-and - battery.

  If you have a laptop, things can get quite a bit more difficult.  If you can find a different model for your computer name, you may be able to find the manual here--> http://tim.id.au/laptops/packardbell/ , but some of these manuals can not explain clearly how to get to the CMOS battery.

• Date and time system continues to change each time the system starts.

  I noticed that the time and date of my home PC gets changed every time the system is booted. The default date is set for Jan. 2008, when in fact it should be July 2014.

  Also, my PC became slow death. I use Windows 7 on 1 GB of RAM, 250 GB PC. I used last my home PC 2 years back, but there has always been someone to use it.

  It shows the OS disk to 7 GB of free, when in fact I never installed or anything unnecessary stored on the disk of BONE; Whatever unnecessary programs were there, I uninstalled them recently, keeping just a few essential ones. After uninstalling, it shows to 7 GB of free, when in fact it should be more than that.

  I use Avast anti-virus, which I think is unnecessary, that its not to protect my PC and as other programs, too, is quite dead slow.

  The system is infected by viruses? Manually, I checked the system for viruses and clean the system of all unnecessary and, program files, but I'm still not sure whether it is a virus or a PC problem.

  I am a COMPUTER analyst, and's just done it 2 days that I use my PC at home. I could format my PC, or where applicable be buy Windows 8 with a new processor.

  Please advise.

  Thank you and best regards,

  Ralph Davidson.

  Hello

  You really need a minimum of at least 2GBs of RAM to run Windows 7 well enough.

  As you have only 1 GB of RAM, which seems to be one of the reasons why it is slow.

  Increase the physical RAM or try ReadyBoost:

  http://www.bleepingcomputer.com/tutorials/using-Windows-ReadyBoost-to-increase-performance/

  Looks like you have some problems.

  Wrong Date/time

  If after you set the Date and time, and then stop and restart your machine and the time returns to the year 2008, and she did this whenever you reset, then restart the PC you have a CMOS battery has failed in the motherboard.

  They cost about $5 and are easy to replace.

  How to replace a CMOS battery.

  http://www.computerhope.com/issues/ch000239.htm

  ________________________________

  For hard disk space:

  This free program allows you to see what is taking place.

  http://www.Jam-software.com/treesize_free/

  Also check how much space system restore uses:

  http://Windows.Microsoft.com/en-us/Windows7/how-much-disk-space-does-System-Restore-require

  _____________________________________

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  _____________________________________

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  ____________________________________

  And for general maintenance on your machine:

  You should have used Malwarebytes in previous advice here on hard drive

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware and if necessary make mode safe mode with networking: AntiMalware and if necessary do in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  'Advanced options boot (including safe mode).

  http://Windows.Microsoft.com/en-us/Windows/Advanced-startup-options-including-safe-mode#1TC=Windows-7

  _______________________________________

  And also scan with the free version of SUPERAntiSpyware

  http://www.SUPERAntiSpyware.com/download.html

  SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

  SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

  ______________________________________

  THS is a very good program to scan your system to remove adware, etc.:

  http://www.bleepingcomputer.com/download/adwcleaner/

  AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

  _____________________________________

  And just to be sure, nothing is lurking in the background:

  'TDSSKiller Rootkit Removal Utility download for free'

  http://USA.Kaspersky.com/downloads/TDSSKiller

  @@@@@@@@@@@@@@@@@@@@

  Make sure you have the latest updated drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  What are the other steps, which does not include some of the above:

  "Optimize Windows for better performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It would be a good idea also run the System File Checker tool to check that everything is correct in the system files.

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  See you soon.

• IDS 4215 date and time change after restart

  Hello

  I am facing problem with cisco IDS 4215 (version 6.0), date and time of change in the device after reboot. What is the command to save the configuration. record or write mem does not work.

  Amarjeet Singh

  Once the date and time changes are applied Cisco IPS CLI, they should have been saved. No additional step of "savings" manually is necessary.

  Also, have you thought about Configure NTP on IPS server. IPS synchronizes time with NTP server, if there is no difference.

  I suggest you contact Cisco TAC and report the problem of equipment.

  Kind regards

  Sawan Gupta

• Problem with the registration date and time: only one date is recorded

  Hello community,

  I have the following problem:

  I automatically stores the datetime values in a date column "changed_on", whenever a user saves a form.

  Unfortunately, when I show this value in a form or report, only the correct date is shown. Still, the time is 00:00. There is no time in the database value, too.

  

  Whenever a user clicks the save button in my form, the value of "changed_on" is generated by a calculation that returns "sysdate" (see image below).

  I think I tried everything now, but I can't understand how to record the date and time correctly. I already tried the format for the changed_on field mask to my preferred format, but it does nothing (jj. MM YYYY HH24).

  How can I automatically record the date and time?

  You need two things.

  1. put the mask of the P3_CHANGED_ON element to JJ. MM YYYY HH24

  2. change your source of calculation to

  TO_CHAR (sysdate, ' DD.) MM YYYY HH24 ')

  In this way, what holds the element and implicit conversion happens when recording records will match.

  Thank you

  -Jorge

• reports of conversion time

  Hello

  When we export a column counter usage report date time and time is converted to a number 13-digit

  is it possible to have the conversion algorithm to convert this value to the date and time?

  Concerning

  Daniel

  Hi Daniel,.

  The timestamp format that you see is a time timestamp (specifically a millisecond time timestamp). You can convert timestamps using something like http://www.epochconverter.com, although this is probably not accomplish what you're looking for. You are wanting the reports exported to show the timestamp as hh: mm: MM/DD/YY? If you need to present this as a feature request, but I'll do some tinkering in my lab to see if I can't export to this format.

  EDIT: a few quick searches turned a few posts on the MS forums discuss conversion Epoch timestamps in Excel. This link seems to include a formula that converts the timestamp of the time in an excel-readable format, which can then be converted to a human-readable format by setting the cell a Date/time format.

  http://www.MrExcel.com/Forum/Excel-questions/49217-converting-normal-time-epoch-time-format-using-Excel.html

  I have not tested yet, since the posters in the forum do not specify whether or not timestamps with which they deal are in seconds or milliseconds, then it may require additional conversion to make it work if they deal in seconds with the provided formula.

  EDIT again: I took the formula that they suggested in the link above and it seems to work only on the timestamps that are provided in a few seconds. As the time stamp that we provide is in milliseconds, you need to split the time value of 1000 as a result of the following formula:

  = ((A1/1000)/86400) + 25569

  Where A1 is the cell that contains the time stamp. I have provided a screenshot of this formlua in action below. Let me know if you have any questions. Sorry if all my editing is spamming your e-mail address.

  

  Final cut (I promise): I pulled a measure of consumption in excel report, to see if it was possible to convert the entire column, and so far the best solution I have found is the following:

  -Insert a new column between #Time and DNS host name (I called him 'Converted time')

  -Select the line below the title and your entry form (B11 in my case)

  -Formula ' = ((A11/1000)/86400) + 25569 "(with additional info at the top of the rerport values time started to A11)

  -Press ENTER to insert the formula

  -Select the cell containing the formula

  -Double click on the box in the lower right of the cell, it will apply the formula to all of the following lines

  -Select the column, and then right-click to open the menu "Format cell".

  -Define the colum 'Time' and select the desired format

  I hope this information was useful!

  -Chris

  Technical Support Engineer | VCP4

  VMware Support Global Services

• Recommended value for the BAM data expiration time

  Hello
  
  Can someone tell me what is the recommended value for the BAM data expiration time?
  
  Enterprise Server default is 24 hours, but I would like to be able to raise the average runtime instance after several months. Is it reasonable to the value of the time-out value a high value? Or it will have an impact on the performance of BPM/BAM?
  
  Thanks in advance.
  
  Best regards
  CA

  Normally, we keep the BAM data expiration time at halfway with 24 to 72 hours. For historical reports that you are looking for the Data Mart / Data Warehouse DB are more logical. This database stores the data forever and takes pictures at longer intervals, normally 24 hours. These data are not in time real normally then because a capture instant is only taken once per day but will give you historical reports that you are looking for. The data from this database structure is almost identical to the BAM DB.

• Date and time display problem

  Hello everyone,
  
  I'm having a little problem and I hope someone here can help me. I have a form and a report based on a table, let just say for simplicity that is the structure of the table:

  create table table1(
  id varchar2(5),
  date_added date)

  I have made a calculation, after submit, the form. If the end user has to put in the code. The code for the calculation is:

  select sysdate from dual

  Now, this is where I get my problem. I want to be able to display the date and time in the report. The code that I use for this is:

  select id, to_char(date_added,'DD-MON-YYYY HH24:MI:SS') from table1

  However, this produces the result on my APEX report:

  1 , 11-MAR-2009 00:00:00

  Really frustrating thing is that if I insert by using the command line, SQLPlus or APEX SQL commands I get the expected result.

  4 , 11-MAR-2009 10:32:35

  Anyone know what I'm doing wrong and how to fix my problem?
  
  Thanks in advance,
  -N.S.N.O.

  Hi NSNO,.

  I created a form as below and is entered a few entries to test the date column, which is not included in the form. It is filled by the trigger as follows:

  CREATE TRIGGER biud_events
  BEFORE the events of the INSERT or UPDATE or DELETE ON
  FOR EACH LINE
  BEGIN
  IF THE INSERTION
  Select nvl (max (id), 0) + 1 in: new.id of events;
  : NEW.event_date: = SYSDATE;
  END IF;
  IF THE UPDATE CAN
  : NEW.event_date: = SYSDATE;
  END IF;
  END;

  You can access the form and the report by clicking on the links below. Report gives the correct time.

  http://Apex.Oracle.com/pls/OTN/f?p=43368:63

  http://Apex.Oracle.com/pls/OTN/f?p=43368:64

  Kind regards
  Zahid

• International date and time

  Last week, I was in the United States and took a lot of pictures.  Now that I'm back in Australia, Photos has automatically adjusted the time and date of the pictures to what was the time in Australia, not the time it was when I took the pictures.  It's incredibly annoying.  Does anyone know how to fix this please? Thank you very much.

  Hello! I had the same problem. I took photos in Asia, some on them without location data. I imported on my Mac at home in France. And then, something went wrong with the date and time. As I've learned here for photos without location data, Photos uses the time zone of the place where you perform the import. If had imported the photos in the same zone where I took them, everything would have been fine.

  The solution was to select all the photos and then manually set their time zone in Malaysia where I took them. You can do this with "setting date and time" to the 'Image' (or 'Photos' menu, or however, it is called in English).

• Can I change the date and time on my account?

  Is there anywhere on this site where I can set the details of the date and time?

  When I posted a recent issue, the date and time were incorrect IE not my country date & time.

  Thank you

  Sylvia

  PS Sorry if this is the wrong place to post this question, not that the possibilities of passage are really there?

  The date and time are universally on us Pacific time zone. You can't change it.