reports on the problems and solutions has stopped working message all the time

I can't access the control panel reports of problems and solutions and constantly get one - problem reports and solutions has stopped working, message on the screen.

How can I disable or fix this problem.

Advertisement

Hi NickMeyer,

1. have you made a recent software or hardware changes to the system?

You can check if there is information in Event Viewer which may help us to solve the problem:

What are the information contained in the logs of the event (Event Viewer)?

You can also temporarily disable the security software and firewall installed on the system and check if the problem persists.

Note: Be sure to enable the security software on the computer after checking.

Hope this information is useful.

Tags: Windows

Similar Questions

  • Help and Support has stopped working

    When I try windows help, I get a box error 'help and Support has stopped working", followed by another error box"Problem Reports and Solutions has stopped working ". I get a similar error of Skype and other programs. Help, please.

    Thank you
    Vrat.

    Hello

    (1) did you of recent changes to the system?

    Method 1: Run a sfc scan.

    Follow the steps in the below link to perform a sfc scan and look for errors.

    http://support.Microsoft.com/kb/929833

    Check if an error occurs.

    Method 2: Perform a clean boot

    Follow the steps in the link below to perform the clean boot.

    http://support.Microsoft.com/kb/929135

    Note: once you are done with the boot, follow step 7 in the link to your computer in normal mode.

    It will be useful.

  • igfxext module has stopped working message is displayed at the start of Windows 7. What is c?

    igfxext module has stopped working message is displayed at the start of Windows 7.  What is this and how can I fix?

    Hi Bob Bala.


    Thanks for asking this question to Microsoft Community!

    As I understand it you receive a startup message all to connect to the computer.

    He would be grateful if you can answer these questions to help you further.

    1. have you made changes on the computer before this problem?
    2. What is the brand and model of your computer?

    I would suggest trying the following methods and check if it helps.

    Method 1:

    You can try to check if the problem occurs in safe mode and check if it helps.

    Method 2:

    If the problem does not exist in Mode without failure, then try to put your computer in a clean boot state.

    By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:

    http://support.Microsoft.com/kb/929135

    Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

    Thanks for posting the results and let us know if you need help to solve the problem and we will be happy to help you.
     
  • Desktop icons not working/Getting Internet Explorer has stopped working Message also

    I'm having a problem with my desktop icons.  The first time, I use a desktop icon to enter a site when I first you register my lap top everything works but when I close the site and try to open another icon on my desktop, icons no longer highlight or open.  This just started today.  Ran a comprehensive analysis with Norton 360, but he found nothing. Also in constant trouble with my internet explorer. Download internet explore has stopped working message.  Is there a way to fix this?

    I tried your suggestion about resetting my internet explore.  Follow the link that you provided, and it worked.  All my icons work (opened and closed several times to double check). Also my internet has regained its original speed.  Thank you very much!

  • "License for this product has stopped working" message whenever I open Acrobat Pro.

    "License for this product has stopped working" message whenever I open Acrobat Pro.  I am at a loss on how to solve the problem.  Can anyone provide some ideas?

    Thanks Bill.  After a good night's rest that I don't think I'm as big of a fight with Adobe as I was yesterday.  I could browse the search results with more patience and found these instructions:

    Error "Licensing has stopped working". Windows

    My problem was resolved after the first step.  Thank you.  Life is much more peaceful when do the things that are supposed to work.

  • "Away from the taskbar" taskbar and Explorer has stopped working

    There is a bug with the taskbar. Here's a video: www.youtube.com/watch?v=qGDVjj93oKA

    I did a disk cleanup to delete all the thumbs and other things. I also reset some things to clear the messy icons (leave a tutorial to another question on this site). Once I clicked on a program that was not in the taskbar (because I removed it some time ago) and he said "Unpin the taskbar." Although it wasn't there, I clicked and it I got a message saying that the Explorer has stopped working. Is there something else with the register or the temporary data file that I need to reset? I'm not the average user. Can you help me please?

    News of the computer: http://prntscr.com/5pqovk

    More information: http://prntscr.com/5pqp54

    I've already updated my computer completely. I have not installed the virus because I have AVG and I also use Sandboxie and Virtualbox.

    Edit:<p class="help"> <p class="reply">Hello Lucas,.</p> <p class="reply">Thank you for the update.</p> <p class="reply">I appreciate your efforts.</p> <p class="reply">It is regrettable that the problem still persists.</p> <p class="reply">I suggest you <strong>perform the upgrade on the spot</strong> and check if that helps.<br>Refer to this article:<br> <strong>How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2</strong><br> <a href="http://support2.microsoft.com/kb/2255099" rel="external nofollow noreferrer">http://Support2.Microsoft.com/kb/2255099</a></p> <p class="reply">Note: I strongly recommend to back up all your important files and folders on an external storage device before performing any type of repair operating system or upgrade.</p> <p class="reply">Please keep us informed of the status of the issue.</p> <p class="reply">Thank you</p>

  • I installed the update to CC on my PC and it has stopped working.

    The other day I installed the update for Creative cloud on my PC (Windows 8).  It has stopped working completely.  I tried to uninstall and reinstall the program several times.  Whenever I uninstall it, Windows says it can't be uninstalled correctly.  When I reinstall, the icon returns on my desktop but when I try to open anything that happens.  I need this program to download Photoshop and I'm VERY frustrated.  Any advice will be appreciated.

    Sign out of your account... Uninstall... to run vacuuming...

    -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

    -using the vacuuming after uninstalling and prior to the relocation is necessary

    -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

    -Restart your computer... Sign in to your account... Reinstall

  • HP Back up and restoration has stopped working

    Moose title: Back up and recovery

    I just got a message from WINDOWS on my screen saying WINDOWS found a problem on my computer which needs attention.

    When I clicked on the dialog box, I had another box titled "Reports on the problems and solutions" with a message saying that HP Backup and Recovery Manager has stopped working properly - an update is available that solves this problem.

    Below there is a button that says "click here to download the update from HP"

    However - when I click on this button - nothing happens. His death or frozen or something.

    Anyone got any ideas?

    http://welcome.HP.com/country/us/en/contact_us.html

    As it is a software of HP you have problems with, you will need to contact HP at the link above.

    See you soon.

    Mick Murphy - Microsoft partner

  • Satellite A200 - 23K - Excel and Word has stopped working

    Hello!

    I have a problem on my Toshiba Satellite A200 - 23 k. I installed windows 7 and office 2010. I have a problem whenever I try to run excel or word it stop working. It shows who has stopped working the window.

    Maybe someone had the same problem and knows a solution? Thank you in advance. Waiting for answer

    Hey Buddy,

    As far as I know Office 2010 isn't on the market yet and he s only available beta version.

    You must choose an official version of the office such as Office 2007 or 2003. Both versions work well and most of the problems he's already resolved.

  • Problem: Data Manager has stopped working

    "data manager has stopped working" it's the pop-up window that appears everytime I open my laptop. I always click on the solution on the net but nothing happens. How to stop or fix this problem. I use windows7.

    Hello

    1. What is the number of brand and model of the computer?

    2 have you made any changes to the computer before the show?

    3. have you installed Data Manager?

    Follow the mentioned methods:

    Method 1:

     

    Step 1: Check in safe mode

     

     

    You can also check if the problem persists in safe mode.

    Reference:

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

    If you are able to see the start icon, then executes the method 2.

     

    Step 2: Perform a clean boot and check.

     

    To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135


    Please note:  After troubleshooting, be sure to start your computer in normal mode by following step 7.

    Method 2: Uninstall and reinstall data manager if it is installed and check

    Uninstall or change a program:
    http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

     

    I hope that the above information is useful!

  • Portege R400-600 - installed some SW and everything has stopped working...

    Hello:

    I installed a few SW and:

    1. the menu that appears at the top of the screen when you press the Fn key with something arrested appear.

    2. the blue icon on the front of the machine that displays the status of the WLAN has stopped working, although the WIFI does not work always.

    3 Toshiba Flashcards started popping up with an error saying they have stopped working - are there flashcards in this machine at all?

    4 then, Control Panel / programs and features / turn Windows features on / off - whatever it is, I would like to add, it ends with an error - "an error occurred when installing the sw.

    5. in addition, tried to upgrade to the latest Toshiba Bluetooth stack. The installation is never - ending crashes

    6. access the hard disk is really slow. Do not know why. Any idea?

    In the old notebooks from Toshiba, I would setup just a package of COMMON MODULE, but I can't find something like this for Vista.

    Any help on this appreciated. Please, send them to [email protected], too.

    Hello Jiri

    As a first step, I will confirm what Robin wrote on the package of added value. Back to your problem: no one knows what kind of software you installed and t is possible that now you have some negative influence on the functionality of Flash cards. Please try to reactivate the flash cards. You can do this next start - all programs-Toshiba-Utilities-Restart Flash Cards.

    To be honest, after installation of some software there are many issues with your laptop nice Portege and maybe you need to restore the operating system to an earlier time using System Restore option. After having done that, I'm sure that everything will be OK again.

  • Satellite A300 webcam problem - CEC_MAIN.exe has stopped working

    Hello

    I have problem when I open my webcam Ii see this message:
    + Cec_main.exe has stopped working.

    http://www.assayyarat.com/MyImages/Sep08/bloool_Untitled.jpg

    Can someone help me?

    I m wondering how someone can help you if you n t post something on your laptop and installed OS?

    Just for the note; Have you tried to reinstall the webcam software?
    Maybe you should try this instead of waiting and waiting and waiting

  • MS Updates caused problems "Media Center has stopped working"

    After the MS Updates this week, we have a problem with our Media Center. We have a HP Touchsmart IQ526 running Vista Home Prem when are connected to the Internet and our local cable system. Everytyhing worked almost without problems because we have installed in January. After that MS Updates this week required a reboot, Media Center stops whenever we change the channel - errors "Media Center has stopped working".  Sometimes when changing positions both with the remote control and with the mouse. Is there anything other than a reinstallation of Vista?  Can you help us?

    Hello Cwray

    Please write to the Microsoft Forums.

    This error message can occur if there is some system files corrupted on your computer. I suggest that scan you a file system [SFC] checker on the computer that would be a search for system files corrupted on the computer and replace them.

    (A) the SFC scan enforcement procedure:
    1. click on the Start button
    2. on the Start Menu, click all programs followed by accessories
    3. in the menu accessories, right-click on command line option
    4. in the drop-down menu that appears, click the "Run as Administrator" option
    5 If you have the enabled User Account Control (UAC) you will be asked to consent to the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.
    6. in the command prompt window, type: sfc/scannow then press enter
    7. a message is displayed to indicate that "the analysis of the system will start.
    8. be patient because the analysis may take some time
    9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue
    10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.
    11 after the scan finished, close the command prompt window reboot the computer and check.
    The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista.
    For more information please visit the link below.

    How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
    http://support.Microsoft.com/kb/936212

    Check whether the problem is resolved.

    B. I also suggest you to rebuild the Media Center data store.
    To do this, follow these steps:
    1. Click Start, type run in the start search box, then click on run in the list programs.
    If you are prompted for an administrator password or for confirmation, type the password, or click on continue.
    2. in the Open box, type % systemdrive%\programdata\microsoft\ehome, and then click OK.
    3. in the details pane, right-click right mediacenterdatastore.db and then click Rename.
    4 rename the file in mediacenterdatastore.old
    5. run the file, %systemdrive%\Windows\eHome/mcUpdate.exe
    6. launch windows media center.

    Click on the link below to get more information on media center.
    http://thegreenbutton.com/forums/default.aspx

    C. I also suggest you to check the boot and if you are able to access the Windows media center.
    To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. Boot stops interference with other third-party software on the computer.
    Steps to perform the clean boot:
    1. click on start, type msconfig in the search box and press ENTER to start the System Configuration utility. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
    2. in the general tab, click Selective startup.
    3. under Selective startup, clear the check box load startup items.
    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
    5. click on OK.
    6. When you are prompted, click on restart.
    7. after the computer starts, check if the problem is resolved.

    If the problem is solved, check what is the cause of the problem, referring to the link given below:
    http://support.Microsoft.com/kb/929135

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
    Click Start, type msconfig.exe in the start search box and press ENTER.
    If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.

    When you are prompted to restart the computer, click on restart.

    It may be useful
    Thanks and greetings
    Support Microsoft-dieng
    Visit our Microsoft answers feedback Forum and let us know what you think
    http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/

  • disk clean up of maintenance and Explorer has stopped working

    My Explorer and disk cleanup has stopped working, do you know why? address email is removed from the privacy *.

    It is always sensible in this situation to achieve a malware check

    Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.

    http://www.Malwarebytes.org/

    Download and run SuperAntiSpyware (Free Edition)

    http://www.SUPERAntiSpyware.com/download.html

    Some malware is installing the entries of proxy server redirecting internet connections. If you encounter this problem step 2 see in the following link:

    http://www.myantispyware.com/2011/02/21/how-to-remove-Internet-Security-Essentials-virus/

  • MachineInformation has stopped working message after the Windows 8 start

    Whenever I start my laptop new Windows 8 I get a message pop-up window "MachineInformation has stopped working".

    Details of the problem:

    Signature of the problem:

     

    Problem event name: APPCRASH

    Application name: MachineInformation.exe

    Application version: 1.5.36.0

    Application timestamp: 519aae96

    Fault Module name: clr.dll

    Fault Module Version: 4.0.30319.18051

    Timestamp of Module error: 5173c1a1

    Exception code: c0000005

    Exception offset: 000a44dc

    OS version: 6.2.9200.2.0.0.768.101

    Locale ID: 1033

    Additional information 1: c98e

    More information 2: c98e3f5b4362ebf9eb3c8e3989c24a58

    Additional information 3: dc43

    Additional information 4: dc433c1f04784a57c043da45ead8e193

    What is the cause and how do I fix?

    Thank you

    Hi Richard,

    Glad to know that the problem has been resolved. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

Maybe you are looking for

  • I can't save and exit tabs

    in the old firefox, when I tried to close FF he asked me: you want to save your tabs? (Yes) (none) (never ask again)where is this kind of things now? : () I can't find anywhere.or y at - it an addon or something for this to happen? I want just the ol

  • Tecra R10-116 (what CPU)?

    Hello In Windows Vista 32 SystemInfo has shown me in CPU: Intel (r) Core (TM) 2 Duo CPU @2.26 SP9300But after the BIOS from 1.4 to 1.5 upgrade and download updates windowsSystemInfo status CPU: Intel (r) Core (TM) 2 Duo CPU P9300 (without "S") @2.26

  • eStudio450/etc/cups/ppd--> printer.ppd file

    Hello I would like to know how to set up dscInfo so that the connected user name appears on printing private instead of default 'CUPS user.DSSC USERLOGIN = User CUPS Printis the standard input. Someone has an idea? Thank you very much!edubidu

  • I went looking for an old discussion and all of my discussions have disappeared. Can someone tell me what is happening?

    I went looking for an old discussion and all of my discussions have disappeared. Can someone tell me what is happening?

  • Install Vista as virtual machine

    I recently bought a complete sales of Windows 7 install Microsoft. Is it possible to install this on my Toshiba and legally install Vista (currently installed in Toshiba OS system) as a virtual machine. I guess that since Vista provided with the lapt