Similar Questions

• Re: Request for help with Tecra A10-156 (Vista backup media)

  Dear members of the Forum

  I am the owner of a laptop Toshiba Tecra A10-156. As the owners of this model will be aware, the machine is supplied with Windows Vista pre-installed. Also supplied is a recovery of Windows XP Professional disc, which, once loaded on the machine, remove everything on the hard drive, including the operating system Vista and the Vista hard disk recovery partition.

  The documentation that comes with the laptop warns the user if he wants to take the Windows XP program on the computer, it must burn a DVD of backup software vista before you load the XP image because if it loads Windows XP without doing that then he loses everything to do with VISTA on the machine.
  Unfortunately, when I bought my machine, I did exactly this error and load Windows XP without backup Vista Software. Load the XP dvd, hard drive was completely wiped out, including not only the Windows Vista installation, but also the recovery partition.

  Although windows XP is a good operating system, I would like the ability to restore my machine to the factory setting. When I asked what to do with Toshiba, they said that the only way they could help would be to sell me a backup DVD of Vista recovery which would cost me a little money. (more than thirty books).
  They also mentioned that if I could find another owner of A10 - 156 using vista would be ready, they could burn a DVD using their recovery from vista machine and then I would be able to use this DVD to do the job.

  As I know personally of all other owners Tecra A10, I am writing to make a plea to ask if some A10-156 (it takes as the exact model) owner would please that nature to let me have a copy of VISTA backup medium please. Of course, I'd be more than willing to pay a total amount of the Virgin DVD (s) and shipping costs.
  If someone is willing or able to help should I very grateful indeed and hope to hear from a fellow A10-156 owner as soon as possible.

  Yours sincerely
  Ian in the United Kingdom

  I hope someone here can help and maybe you should put your e-mail address for direct contact.

• request for help with drivers

  Dear support team,

  I ask you to help you find the drivers.

  Hardware for generic Bluetooth adapter ID:

  USB\VID_03F0 & PID_311D & REV_0001
  USB\VID_03F0 & PID_311D

  Hardware ID device Base system:

  PCI\VEN_197B & DEV_2392 & SUBSYS_167E103C & REV_30
  PCI\VEN_197B & DEV_2392 & SUBSYS_167E103C
  PCI\VEN_197B & DEV_2392 & CC_088000
  PCI\VEN_197B & DEV_2392 & CC_0880

  Thank you.

  Hello:

  Go to the page of the driver and support for your laptop, download and install the following drivers:

  Generic adapter Bluetooth = Driver Atheros Bluetooth or use the one from the link below.

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?lang=en&cc=us&sp4ts.Oid=5060882&swItem=ob_94298_1

  = JMicron card reader Driver base system device, or use the one in the link below.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_115195_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Request for help with page apex a button popup.

  Apex 3.2/Solaris 10
  
  I try to open a page of the apex (report) in a pop-up window when a button is pressed after the plethora of examples in the forum.
  
  I applied what follows in "Edit Page buttons" to one of the 'attributes of button' and 'Target URL' is trying to open my report (page 14) in a pop-up window.
  
  javascript.popupURL ('f? p = & APP_ID.:14: & SESSION.) ") ;
  JavaScript.popup2 ('f? p = & APP_ID.:14: & SESSION.) ") ;
  Window.Open ('f? p = & APP_ID.:14: & SESSION.) ") ;
  
  I have also implemented the conditional branch for this button in order to mitigate the error 'page not found - restart the application.
  
  The window.open variant does not. The javascript 2. variants open the page, but in the same window (no popup).
  
  also, I read that to fill my pop-up report (it should), a Window.Close (); should be somehow associated with a close button on the popup page. Specifically, where this code is placed?
  
  Thank you!
  
  Paul

  Paul:

  Specify the URL as

  JavaScript:popupURL('f?p=&APP_ID.:14:&session.');

  Instead of

  javascript.popupURL('f?p=&APP_ID.:14:&SESSION.');

  CITY

• Request for help with the output of a script

  Hello

  I need assistance with the output of a script. I have a script that retrieves advanced config of the esx hosts in a cluster and exports to a txt file. Here is the script I use:

  $Decimals = 1

  $VCServers = @)

  $VMSummaries = @)

  $InputFile = "VCs.txt".

  1. Read the input file, loop of VCs

  Foreach ($VCname in Get-Content $InputFile) {$VCServers += $VCName}

  Foreach ($VCServer to $VCServers)

  {

  $VC = to connect-VIServer $VCServer

  $VMhosts = get-VMHost

  Foreach ($VMHost to $VMhosts)

  {

  Write-Progress "Collecting information in $VCServer" 'connecting to host $VMHost' - Id 0

  $VMSummary = "" | Select the host name, TCPIPHeapMax, TCPIPHeapSize, HeartbeatTimeout, HeartbeatFrequency, HeartbeatMaxFailures, MaxVolumes

  $VMSummary.HostName = $VMHost.Name

  $VMSummary.TCPIPHeapMax = (get-VMHostAdvancedConfiguration - VMHost ($VMhost) - name Net.TcpipHeapMax). Values

  $VMSummary.TCPIPHeapSize = (get-VMHostAdvancedConfiguration - VMHost ($VMhost) - name Net.TcpipHeapSize). Values

  $VMSummary.HeartbeatTimeout = (get-VMHostAdvancedConfiguration - VMHost ($VMhost) - name of NFS. HeartbeatTimeout). Values

  $VMSummary.HeartbeatFrequency = (get-VMHostAdvancedConfiguration - VMHost ($VMhost) - name of NFS. HeartbeatFrequency). Values

  $VMSummary.HeartbeatMaxFailures = (get-VMHostAdvancedConfiguration - VMHost ($VMhost) - name of NFS. HeartbeatMaxFailures). Values

  $VMSummary.MaxVolumes = (get-VMHostAdvancedConfiguration - VMHost ($VMhost) - name of NFS. MaxVolumes). Values

  $VMSummaries += $VMSummary

  }

  }

  $OutputFile = "AdvancedNFS.txt".

  $VMSummaries | Format-Table | Out-file $OutputFile

  This script runs without any problem and generates a text file that looks like this:

  TCPIPHeapMax TCPIPHeapSize HeartbeatTimeout HeartbeatFrequency HeartbeatMaxFailures MaxVolumes hostname

  -

  ---

  -

  ---

  -

  ---

  -

  ---

  -

  ---

  -

  ---

  -

  ---

  abcd1 abcd2 abcd3

  I am trying to output a csv file and run into a problem where each host values are not displayed correctly. I replaced the last 2 lines in the script as follows:

  $OutputFile = "AdvancedNFS.csv".

  $VMSummaries | Export-CSV $OutputFile

  My output looks like this:

  Host name	TCPIPHeapMax	TCPIPHeapSize	HeartbeatTimeout	HeartbeatFrequency	HeartbeatMaxFailures	MaxVolumes
  ABCD1	System.Collections.Hashtable + ValueCollection	System.Collections.Hashtable + ValueCollection	System.Collections.Hashtable + ValueCollection	System.Collections.Hashtable + ValueCollection	System.Collections.Hashtable + ValueCollection	System.Collections.Hashtable + ValueCollection

  What I am doing wrong?

  Thank you

  Alex

  Hello

  You can try changing your script like this:

  • -Replace "." "With values '-["'-']. "

  • -Optimize calls to Get-VMHostAdvancedConfiguration

  Your code will look like this:

  ...

  Write-Progress "Collecting information in $VCServer" 'connecting to host $VMHost' - Id 0

  $VMSummary = "" | Select the host name, TCPIPHeapMax, TCPIPHeapSize, HeartbeatTimeout, HeartbeatFrequency, HeartbeatMaxFailures, MaxVolumes

  $VMSummary.HostName = $VMHost.Name

  $VMHostAdvancedConfig = get-VMHostAdvancedConfiguration - VMHost $VMHost - name Net.TcpipHeapMax, Net.TcpipHeapSize, NFS. HeartbeatTimeout, NFS. HeartbeatFrequency, NFS. HeartbeatMaxFailures, NFS. MaxVolumes

  [$VMSummary.TCPIPHeapMax = $VMHostAdvancedConfig\["Net.TcpipHeapMax"\]

  [$VMSummary.TCPIPHeapSize = $VMHostAdvancedConfig\["Net.TcpipHeapSize"\]

  $VMSummary.HeartbeatTimeout = $VMHostAdvancedConfig\ ['NFS. HeartbeatTimeout '\] '.

  $VMSummary.HeartbeatFrequency = $VMHostAdvancedConfig\ ['NFS. HeartbeatFrequency '\] '.

  $VMSummary.HeartbeatMaxFailures = $VMHostAdvancedConfig\ ['NFS. HeartbeatMaxFailures '\] '.

  $VMSummary.MaxVolumes = $VMHostAdvancedConfig\ ['NFS. MaxVolumes '\] '.

  $VMSummaries += $VMSummary

  ...

  Kind regards

  Dimitar

• Ask for help with PHP to send an e-mail

  I have a family site. I use a PHP only access with that family members (portions glued and may not be complete)

  / * Adds a line of [] $authorization for each pair of login/password you want to add: * / (I have 30 odd)

  [$authorization] = array ('Big boy', '123456');

  $submit = $_POST ['submit'];

  $user = ";

  $password = ";

  $remember = ";

  If ($_GET ['user']) {}

  $user = $_GET ['user'];

  $password = $_GET ["password"];

  $remember = $_GET ["remember"];

  }

  If ($_POST ['user']) {}

  $user = $_POST ['user'];

  $password = $_POST ["password"];

  $remember = $_POST ["remember"];

  {foreach ($authorization as $loginpair)}

  {If (($user == $loginpair[0]) & & ($password == {$loginpair [1]}))}

  $_SESSION ['user'] = $user;

  $loginsuccessful = TRUE;

  }

  {If ($_SESSION ['user'] == {$loginpair [0]})}

  $loginsuccessful = TRUE;

  Then, on each page of my site, I

  <? PHP require('.. / Login.php ');? >

  I know that's not the best system... I'm afraid to try the mySLQ

  There is much information available to send the results of forms, but this isn't what I want to happen. As I create a session for the user, it seems to me that it should be possible for PHP to send me an email with the name of the users (the first time in the current session), a page is accessed.  By using the following code (from somewhere)

  <? php mail (' [email protected]', 'Topic of the e-mail', "The body of the email?");? >

  I get an email sent to me. But how can I get the name of the user, the time and date and... If possible, do it just send me an email once.

  I hope that my request for help is logical... I appreciate your time. Thank you

  Ralph3616 wrote:

  My 'desire' was to replace Scripture in a file which I then access through FTP to read, send the results in an e-mail message would be easier.

  If you use my code and create a $_SESSION in the login page and replace $_COOKIE for $_SESSION is exactly what he will do.

  If you are not ready to be a little more open minded and at least give it a go then I guess you're stuck with what you currently have.

• Clicking on the tab help for help with photoshop first time get in "photoshop online help could not be displayed because you are not connected to internet" but I'm connected to the internet?

  Dear all

  I need help with the following problem:

  Clicking on the tab help for help with photoshop first time get in "photoshop online help could not be displayed because you are not connected to internet" but I'm connected to the internet.

  Appreaciate help on this problem.

  MSD

  I find it easier and faster to use just this link, which goes to the same place as aid > online help for Photoshop:

  Using Photoshop | Photoshop help

  To bookmark so that you can find.

• Dialog box that says ' Creative Cloud Installer wants to make changes. Type your password for this purpose"- I type my password for Adobe ID (creative cloud), but it will not accept it. who should I go for help with this query?

  Dialog box that says ' Creative Cloud Installer wants to make changes. Type your password for this purpose"- I type my password for Adobe ID (creative cloud), but it will not accept it. who should I go for help with this query?

  It does not ask the cloud your computer admin password password!

• Request for responses with multi-Select fast

  Hello
  
  Hoping someone can help - I need to create a prompt in a request for answers to allow users to choose a customer - I need this to be similar to a multiple selection in a dashboard command prompt so that the user can type begins by and find the customer what they want. Currently, the only options of answers is to scroll through the entire list or type the value directly. The application is simply posted as a link on a page of dashboard - I'd rather not have to create another page of dashboard if possible.
  
  I would be grateful for any ideas.
  
  With our thanks,
  Patricia

  Patricia, you try to do this more difficult it must be. Of after what you say, just use value Interaction > Browse the report which lists all the names "begins with Pat. Put "is invited" on the name of the destination report cust column and it will give you the "last step" you are looking for.

  P.S. a lot of useful tips in this thread. It would be nice to price messages with points.

• Photosmart: Called tech support for help with my printer and got a sales pitch

  I called HP customer service today to get help with my wireless printer because it won't print wireless. What I got was a sales pitch to buy a value of $450 of virus protection! So very disappointed!

  Hello
  
  Thank you for using the HP forum.

  How can we help with your wireless?

  Have you tried the following:
  
  Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem
  
  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926 & h_lang = on & h_client = s-h-E016-1 & h_keyword = DG - PDU
  
  Hope that helps.

• living person to contact for help with download

  Now Adobe Team - not good to serve customers paying leaving suspended on photoshop elements for windows 13 and the first lights. All 8 pieces downloaded cannot open in windows 8.1 SAY MISSINGFILE ARCHIEVE PART of ADOBE NEED all PARTS to DOWNLOAD COMPLETELY. SO HELP WITH DIRECT RESPONSE! NUMBER OF VOICELESS!

  Friend,

  To install Photoshop or Premiere Elements for windows, you will need to download the exe and 7z files. They usually end up in the folder to download unless otherwise stated.  Just make sure you put the two files in the same folder and double-click the exe file to install. Don't forget to download the version appropriate depending on whether your machine is 32-bit or 64-bit.

  Photoshop elements 13, 12, 11, 10 | 9, 8, 7

  First items 13, 12, 11, 10 | 9

• Looking for help with the motion in still menus of EI.

  Need help to make a menu driven sequelae. can understand the import process in yet. I can't the buttons I did in AE to work. Anyone?

  Read this (but do not have your plan until you read the link at the end of the post):

  http://help.Adobe.com/en_US/Encore/CS/using/WSF49EA5DB-3743-49C2-9831-F66328B192F8.html

  The important part is:

  «The loop point is used first to disable the buttons.» Until the loop is reached, the Viewer cannot select or activate a button. The menu returns to this point on each repetition, so the buttons are disabled when the menu is displayed first. For rehearsals, the duration is shorter and the starting point for all video content in the menu is offset. »

  So in AE, you create a video (the substance of the application) which includes the image of the buttons as they fly in. Still is the addition of highlights. AE for a period of time could also create layers of button, but you will be less confused if you use Photoshop and again for the file menu itself.

  I forgot to give you this link for help, which is the help file to work with AE:

  http://help.Adobe.com/en_US/Encore/CS/using/WSA5513911-0AD1-440C-BDAD-2E0E806B425E.html

  This method begins with a menu into Encore and creates an AE composition from there. It can only work with AE CS6, since you have EN CS6. I don't remember if it is technically a form of dynamic link, which requires corresponding versions of the applications.

  There are a lot of ways to skin this cat.

• What is the correct way to ask for help with the forum, rather than product, questions?

  I can't find the right way to ask a question about the forums themselves.

  PAGulley said

  I can't find the right part of the forum to ask questions about the forum itself and its features. I wonder what the right place and the way is to get help with the forum system itself. I can find the place to ask questions about specific Mozilla products very well.

  Look up where it says contributor tools and select Contributor Forums. Make sure that you scroll to the top or you'll get a bar with different links instead,

  The forum is https://support.mozilla.org/forums where you question would be better in the SUMO community discussions.

• Windows 7 printing with the HP DesignJet 4000ps printer. PLT files

  I have a bit of an interesting problem. Our HP Designjet 4000ps is connected to the network and available via a windows print server or directly via the IP address.  To print our files .plt CAD, for years, I simply added an action to the. PLT file type association to run a batch file by default so that when I double-clicked on a .plt file, it could be copied by the script for batch processing on behalf of the plotter print queue. It worked great until upgraded to Windows 7.  Now when I copy a .plt file to the print queue, the name of the document in the queue of work just appears as a work #xy and has a date unknown and no username listed. The same thing happens if I used the FTP for the tracer to place the file, however to track down an old XP machine and verification of my batch script as well as the method of FTP, the name of the document, date and user name all appear incorrectly in the work queue.

  If anyone else has experienced this? Is this something the way that Windows 7 print spooler works? Is there a way to fix this? If I use the interface for Server Web Designjet 4000ps to send files, everything is correctly listed. This happens only when I'm attemping to copy the file directly to the queue or using FTP on Windows 7.

  David

  Hi KroBaar,

  The Designjet is a commercial product.  I you a link towards the Designjet forums try to repost your question here for better coverage.

  Designjet Forums

• Working with date and time of the request for help from acrobat JavaScript...

  This coming from

  Working with date and time in Acrobat JavaScript (part 1 of 3)

  The following code adds five days to the current date, and then prints the new date in the console window.

  Get the date and time

  var rightNow = new Date();

  Get the value of millisecond

  Article date

  var msRightNow = rightNow.getTime ();

  Calculate in milliseconds, of 5 days

  5 days x 24 hours/day x 60 min / h x 60 s / min x 1000 ms/s

  Challenge of var = 5 * 24 * 60 * 60 * 1000;

  Do the calculation of var CFAbsoluteTime = msRightNow + challenge;

  Create a new Date from the calculated value

  var theNewDate = new Date (finalTime);

  In the actual work on a form code, you'll want to place the

  the object of a field value. But since this is test code, we will

  Print the result to the Console window (great for debugging)

  Console.println ("5 days from now is:" + theNewDate.toString ());

  The foregoing is the exact code (cut and paste)

  The error I get here is;

  ReferenceError: theNewDate is not defined

  1:Console:exec

  undefined

  To get the "undefined" question a lot... it seems to me, learn to distinguish the undefined 'of type' undefined 'variable' and undefined 'value '.

  in this case 'theNewDate' seems to be defined as a variable equal to the current date plus 5 days... BUT I am now "educated" enough to 'see' Why am I getting the error...

  
  

  Any thoughts... Any who...

  You need to highlight all the text that you want to run.

  You have not set the rightNow variable before you can apply a method to the variable.

  You can just add a new variable as msRightNow name. Why not use rightNow.

  Executes the code that you provided with a new departure of Acrobat, I get the following error messages:

  rightNow.getTime is not a function

  1:Console:exec

  TypeError: rightNow.getTime is not a function

  1:Console:exec

  undefined

  What you are showing probably works because your previous attempts have left behind them a variable "rightNow" and as long as you do not have the object of time date change too much, you will not notice the error.

  Cleaning of your code:

  get the number of milliseconds of the date object.

  rightNow var = (new Date()) .getTime ();

  define 5 days in milliseconds;
  Challenge of var = 5 * 24 * 60 * 60 * 1000;

  Add 5 days to the value of this moment and assign the result to the last time;
  var CFAbsoluteTime = rightNow + challenge;

  convert finalTime value in a date object.
  var theNewDate = new Date (finalTime);

  display the result;
  Console.println ("5 days from now is:" + theNewDate.toString ());

  Have you tried the code that I provided, it is another way to add days to the date object.