Request to restart problem!

Similar Questions

• HP Pavilion dv6-3121: start/restart problem

  Hello everyone,

  Yesterday I installed the Intel PROSet/wireless software from the utility to update successfully, on my laptop computer hp laptop pavilion entertainment dv6-3121.

  After successful installation, I restarted my computer. Since then, my laptop could not start or start. It's just a black screen, saying basically "press ESC to continue."

  I tried the ESC pressed to continue, according to the statement, but nothing happened. The screen is always black.

  I contacted Intel, but they said I need to contact hp, to solve the problem. Help, please!

  I am furstrated and lost a lot of time to solve this problem.

  Thank you, adavance.

  Eze

  Hi @Ezedin,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion Entertainment Notebook dv6-3121nr and issues with start/restart problem after downloading the software.

  Here is a link to put the laptop in Safe Mode. From there, you can uninstall the software that is causing this closure.

  If that doesn't help, you could return in safe mode and then you can do a System Restore. System Restore will help if something is automatically updated and do not go well on the Notebook.You may need to consider a day before the software has been downloaded and the question that's happened.

  Please let me know how it goes.

  Thank you.

• Win7 restart problem

  During a recent update that requires a restart, the computer stopped to a white screen with power on but will not re-start. Problem persists I or a program needs to restart the computer. Using Win7

  Hello

  To help you better, please answer these questions.

  1. the updates Windows do you have installed?

  2. are you able to boot to the desktop?

  3. have you made further changes on the computer before the show?

  You can follow the provided methods to solve the problem.

  Method 1: Why is my screen black when I start Windows 7?

  http://Windows.Microsoft.com/en-in/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  System Restore warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Windows 7: back up the registry:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  How to back up and restore the registry in Windows

  Method 2: How to resolve auto restart problem when Windows 7 is a mistake (simple difficulty Article - written by MVP)

  http://support.Microsoft.com/kb/2621246

  If you need help with the Windows operating system, just tell me and we will be happy to help you.

• iPhone iOS 10 5 and restart problem

  Context: a year and a half months ago my left side of the screen (iPhone 5) began to burst, an indication of battery failure. I ran to an apple certified service in the country, I've been during the holidays. They asked 100 euros and five working days, so obviously, I changed the battery in a store not certified in 1 hour (unware of the battery, they put in). With iOS 9.3.5 all was well for the whole of this period later. No problem at all.

  Problem: last Tuesday (so after one year and), I have updated to iOS 10. Once again everything was working fine, until this weekend (3 days later), where my iPhone 5 has started to reboot frequently, i.e. Saturday and Sunday should have restarted more than 20 - 30 times without reason.

  What I tried: I reset all the settings in the settings menu, I did reset function sleep and home button, I restored my iPhone IOS 10 5. Nothing. The reboot occurs again. Last thing I noticed is that the reboot occurs less frequently (100% sure) while the iPhone is in charge.

  Question: is this a software problem on iOS 10 (do not believe now to be honest), or just the coincidence of a pile of problems that have occurred with the iOS 10 update, or something else? Here, I changed the battery (76 kilos), or give the iPhone engineering to get a new one for 198 pounds?

  Any help is welcome. Thank you very much.

  I solved it. I just changed my battery. No problem since then.

• Mac Pro 2013 randomly restart problem

  Hello

  Here's my problem: I have a Mac Pro end of 2013 (6 cores, 16 GB ram, over-pants D500, running OS X 10.10.5 with a WACOM Cintiq 21 - UX as my view only) who has, for the last month or so been randomly restart itself.

  There are some days where it might be three or four times and then days where it won't do it at all. Also there are moments where it works well for hours, but then if I turned off the Mac Pro, it will crash and restart. Sometimes it will freeze momentarily application-wise (but the cursor moves but does nothing) before it restarts but usually just the screen goes black and then it restarts without any warning. I still get the black screen with the «your computer has restarted...» Press any key' and of course, it generates a crash report that I submit to Apple every time (that I'll post more recent one below as well.) I did start secure upward, reset the PRAM, booted single-user, just that I found online to do which is recommended. But nothing seems to have done something to help.

  The Cintiq is connected through a DVI adapter to Thunderbolt. I also have Mercury Elite Dual Pro Rack hung RAID normally via Thunderbolt. There are times when I think that there is a problem with the RAID box and the Mac Pro but not sure. As there is a problem with the Thundebolt ports. I tried to pass the cables autour, but it has not seemed to have made all the difference. This also has all seems to have coincided with the last update of OS X where I've also updated the driver for WACOM Cintiq (I since past to the old driver). Is this all just a matter of software conflict?

  I found an Apple Support thread where someone has indicated that a Kernel Panic may cause this, but then it also seems similar to what I've found, that was the issue with the Macbook Pro, which had problems with graphics a bit backward.

  In any case, here's a crash report if it helps and thank you for any help that anyone can send my way!

  Thu Aug 18 02:40:39 2016

  Panic report *.

  panic (cpu 0 0xffffff7f918c0b32 appellant): "ACPI \"PWRD\ "with zero power failure: < rdar://problem/15746463 > ' @/ SourceCache/AppleGraphicsControl/AppleGraphicsContr ol-3.10.25/src/AppleMGPUPowerControl/kext/AMPCPowerManagement.cpp:512»»»

  Backtrace (CPU 0), frame: return address

  0xffffff81fe9dbda0: 0xffffff800f52ae01

  0xffffff81fe9dbe20: 0xffffff7f918c0b32

  0xffffff81fe9dbe70: 0xffffff7f918c0020

  0xffffff81fe9dbec0: 0xffffff7f918be7ad

  0xffffff81fe9dbf10: 0xffffff7f918bed14

  0xffffff81fe9dbf40: 0xffffff800fad394d

  0xffffff81fe9dbf80: 0xffffff800fad3b48

  0xffffff81fe9dbfb0: 0xffffff800f611867

  Extensions of core in backtrace:

  com.apple.driver.AppleMGPUPowerControl (3.10.25) [90 B 87953-018 b - 32E9 - AD83-0526D8E C4749]@0xffffff7f918b8000-> 0xffffff7f918c4fff]

  dependency: com.apple.driver.AppleBacklightExpert (1.1.0) [65E3187E - B-36E9-bi33-1B13ABB058 949, 1A]@0xffffff7f918b0000

  dependency: com.apple.iokit.IOPCIFamily (2.9) [CA598036-E22A-3AAE-ABB0-9407B560C5C1] @ 7f8fd24000 0xffffff

  dependency: com.apple.driver.AppleGraphicsControl (3.10.25) [3DC2F93F-5197 - 3B 16-8975 - 0142E7A0 474B]@0xffffff7f918b5000

  dependency: com.apple.iokit.IOACPIFamily (1.4) [70E2B65E-A91A-3522-A1A0-79FD63EABB4C] @0xfffff f7f905d0000

  dependency: ffff7f906b2000 @0xff com.apple.iokit.IONDRVSupport (2.4.1) [7372D580-6DDE-3457-B043-49B8447FC9D2]

  dependency: com.apple.iokit.IOGraphicsFamily (2.4.1) [8922721D-5517-3883-BD3A-57422D0244A0] @0 xffffff7f8fdfe000

  Corresponding to the current thread BSD process name: kernel_task

  Mac OS version:

  14F1909

  Kernel version:

  14.5.0 Darwin kernel version: Thu Jun 16 19:58:21 PDT 2016; root:XNU-2782.50.4~1/RELEASE_X86_64

  Kernel UUID: D11F499F-5895-3D58-9101-5671A93D526D

  Slide kernel: 0x000000000f200000

  Text of core base: 0xffffff800f400000

  Text __HIB base: 0xffffff800f300000

  Name of system model: MacPro6, 1 (Mac-F60DEB81FF30ACF6)

  Availability of the system in nanoseconds: 9763446529233

  last load kext to 4247477026004: com.apple.driver.AppleUSBCDC 4.3.3b1 (addr 0xffffff7f928a8000 size 20480)

  Finally unloaded kext to 4307635021147: com.apple.driver.AppleUSBCDC 4.3.3b1 (addr 0xffffff7f928a8000, size 16384)

  kexts responsible:

  com.kairos.driver.DuetDisplay 1

  com.apple.driver.AppleRAID 4.0.6

  com Apple.filesystems.autofs 3.0

  com.apple.iokit.SCSITaskUserClient 3.7.5

  com.apple.driver.AudioAUUC 1.70

  com.apple.driver.AGPM 110.19.6

  com.apple.driver.ApplePlatformEnabler 2.2.0d4

  com.apple.driver.X86PlatformShim 1.0.0

  com.apple.driver.AppleOSXWatchdog 1

  com.apple.iokit.IOBluetoothSerialManager 4.3.6f3

  com.apple.driver.AppleHDA 272.18.3

  com.apple.driver.AppleGraphicsDevicePolicy 3.7.7

  com.apple.driver.AppleUpstreamUserClient 3.6.1

  com.apple.driver.AppleMCCSControl 1.2.12

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.kext.AMDFramebuffer 1.3.2

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.AppleHWAccess 1

  com.apple.AMDRadeonX4000 1.3.2

  com.apple.driver.AppleHV 1

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.6f3

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  3.10.25 com.apple.driver.AppleMGPUPowerControl

  com.apple.driver.AppleLPC 1.7.3

  com.apple.kext.AMD7000Controller 1.3.2

  com.apple.driver.AppleIntelMCEReporter 107

  com.apple.driver.AppleThunderboltIP 2.0.2

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 36

  com.apple.driver.XsanFilter 404

  com.apple.driver.AppleUSBHub 705.4.2

  com.apple.iokit.IOAHCIBlockStorage 2.7.1

  com.apple.driver.AppleUSBXHCI 710.4.11

  com.apple.iokit.AppleBCM5701Ethernet 10.1.3

  com.apple.driver.AirPort.Brcm4360 930.37.3

  com.apple.driver.AppleAHCIPort 3.1.2

  com.apple.driver.AppleUSBEHCI 705.4.14

  com.apple.driver.AppleACPIButtons 3.1

  com.apple.driver.AppleACPIEC 3.1

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleAPIC 1.7

  com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0

  com Apple.NKE.applicationfirewall 161

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.driver.AppleIntelCPUPowerManagement 218.0.0

  com Apple.kext.Triggers 1.0

  com.apple.driver.AppleUSBHIDMouse 185,3

  com.apple.driver.AppleHIDMouse 185,3

  com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.5

  com.apple.iokit.IOBDStorageFamily 1.7

  com.apple.iokit.IODVDStorageFamily 1.7.1

  com.apple.iokit.IOCDStorageFamily 1.7.1

  com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.5

  com.apple.iokit.IOUSBMassStorageClass 3.7.2

  com.apple.driver.AppleUSBHIDKeyboard 176,2

  com.apple.driver.AppleHIDKeyboard 176,2

  com.apple.iokit.IOSerialFamily 11

  com.apple.driver.DspFuncLib 272.18.3

  com.apple.kext.OSvKernDSPLib 1.15

  com.apple.driver.AppleSMBusController 1.0.13d1

  com.apple.iokit.IOSurface 97.4

  com.apple.iokit.IOAcceleratorFamily2 156,17

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.6f3

  com.apple.iokit.IOBluetoothFamily 4.3.6f3

  com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

  com.apple.iokit.IOUSBUserClient 705.4.0

  com.apple.driver.AppleHDAController 272.18.3

  com.apple.iokit.IOHDAFamily 272.18.3

  com.apple.iokit.IOAudioFamily 203.3

  com.apple.vecLib.kext 1.2.0

  3.10.25 com.apple.driver.AppleGraphicsControl

  com.apple.driver.AppleBacklightExpert 1.1.0

  com.apple.iokit.IONDRVSupport 2.4.1

  com.apple.kext.AMDSupport 1.3.2

  3.10.25 com.apple.AppleGraphicsDeviceControl

  com.apple.iokit.IOGraphicsFamily 2.4.1

  com.apple.driver.X86PlatformPlugin 1.0.0

  com.apple.driver.AppleSMC 3.1.9

  com.apple.driver.IOPlatformPluginFamily 5.9.1d7

  com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.5

  com.apple.iokit.IOUSBHIDDriver 705.4.0

  com.apple.driver.AppleUSBMergeNub 705.4.0

  com.apple.driver.AppleUSBComposite 705.4.9

  com.apple.driver.AppleThunderboltPCIUpAdapter 2.0.2

  com.apple.driver.AppleThunderboltDPOutAdapter 4.0.6

  com.apple.driver.AppleThunderboltDPInAdapter 4.0.6

  com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6

  com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2

  3.1.7 com.apple.driver.AppleThunderboltNHI

  com.apple.iokit.IOThunderboltFamily 4.2.2

  com.apple.iokit.IOEthernetAVBController 1.0.3b3

  com.apple.iokit.IO80211Family 730.60

  com.apple.driver.mDNSOffloadUserClient 1.0.1b8

  com.apple.iokit.IONetworkingFamily 3.2

  com.apple.iokit.IOAHCIFamily 2.7.5

  com.apple.iokit.IOUSBFamily 720.4.4

  com.apple.driver.AppleEFINVRAM 2.0

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.iokit.IOSMBusFamily 1.1

  com.apple.driver.AppleEFIRuntime 2.0

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 398

  com.apple.iokit.IOStorageFamily 2.0

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.driver.AppleACPIPlatform 3.1

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com Apple.KEC.corecrypto 1.0

  com.apple.kec.Libm 1

  com Apple.KEC.pthread 1

  It seems that you have a hardware problem with one or two of the GPU.

  -Make an appointment at an Apple store Genius Bar.

  Shop Apple Store - Genius Bar

  https://www.Apple.com/retail/Geniusbar/

  Mac Pro graphics problems (end 2013)

  Mac pro end of 2013 freezes with the spinning wheel

• Satellite L40 - Wi - Fi connection after restart problem

  Hello

  My sister had a Toshiba Satellite L40 (PSL40E - 04501DDU) and a few days ago I installed a wireless router at home.
  Wi - Fi worked within 2 minutes, but when I restarted the laptop he couldn't find any Wi - Fi networks (whereas before I restarted, I found 4).

  It took me about an hour to make it work again
  -Turn off/on Wi - Fi
  -several reboots
  -deletion of a Wi - Fi connection - configs
  -switching between Vista Wi-Fi-tool and without configuration by Toshiba
  -updated drivers
  -etcetera...

  I don't know which of them did the trick, but after going through all these actions it seemed to work again.
  I thought I had conquered the problem, but only today (after only 1.5 days) my sister contacted me saying that the Wi - Fi 'fell down' again.

  Does anyone know what could be the problem?

  When I look in this forum I see about 1200-forum topics on the problems of Wifi on Toshiba laptops, so I guess it's a recurring problem with several models of Toshiba.
  Most of the subjects also speaks a Wifi works very well and doesn't work anymore after restart/sleep/hibernation.

  Laptop: PSL40E - 04501DDU
  OS: Windows Vista 32-bit (latest updates + latest drivers)

  (Please, no answers like: "is your DHCP on?") or "the router is compatible with the Wi - Fi device?")

  Hi crazysoul,.

  I understand that you don't know the answer to that, because you are not always there when the Wi - Fi fails, but if the laptop is not looking upwards * all * networks, the same as before?

  What WLAN driver version is installed on this laptop? The most recent is 7.6.0.164.1, it can be interesting to update. Also, forgive me if you already checked, but under network adapters Device Manager, find the device wireless and in the Properties window, if there is a power management make tab you unchecked the checkbox to turn off the device to save power.

• Restart problems, error Disk Boot error, if please install disk and press a key

  Original title: problems of Reboot

  When I restart my computer it say "Disk Boot error, if please install disk and press a key:?"

  Hello

  1. you remember to make changes to the computer before this problem?

  2. have you changed the BIOS boot device?

  3. What is the brand and model of the computer?

  This could be related to:

  · Startup options is not correctly defined in the BIOS

  · A non bootable CD is in your CD player

  · You don't have any boot device

  · You have installed a new hard drive

  · The hard drive is not properly connected

  · Your system files have been infected

  Change the boot order in the CMOS (BIOS) settings so that your disc is the first in the list.

  a. restart the computer.
  b. new computers often display a startup (or boot) menu. In the start menu, choose "Configuration of the BIOS," or "BIOS settings," or something similar.

  Procedures vary depending on the manufacturer of the BIOS. Usually, you must press a key (for example, F2, F12, DELETE, ESC) or a combination of keys immediately after you
  turn on your computer but before Windows starts. If the Windows logo appears, you must try again by waiting until the Windows logon prompt appears, and then stop and restart your computer again.

  c. the BIOS configuration screen appears. On the BIOS Setup screen, choose the option called "Boot order" or something similar. Startup command settings can also be saved
  under "Advanced settings" or something similar.
  d. Select your drive from DVD or USB drive as first boot device.
  e. restart your computer and see if the problem is resolved.

  
  BIOS WARNING: modification of the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• Drops of wireless network connection - windows Vista Restart problem

  Hello

  Recently installed Windows Vista on a new version of a recovered old PC as well as a few new purchases (memory, DVD player, NAS). Everything in place and works very well, but I'm faced with a problem of wireless network. The system works well: internet etc, but will drop the connection to the router wireless without apparent reason, he is followed by repeated reconnection automatic attempts when he will restore a decent connection for a minute or so and then drop again. This continues ad nauseam. The bulk of what a Windows restart will completely solve the problem for an hour or two until it is started.

  The research of the forums etc, I tried so far:
  -Switching of wireless channels
  -Deletion of "turbo" on the router
  -Disable IPv6
  -Checked drivers are updated
  -Check the firmware of the router

  I'm also reasonably sure of the following:
  -There is no interference (I put 'new' PC exactly in the same place as my old and uses exactly the same network card and router)
  -The work of the (PCI) wireless card (available connections always show the router as well as others in the region when connecting).
  -The router does not appear these problems with my PS3

  My details:
  -Windows Vista Home Premim - fully updated
  -Windows Firewall is the only firewall running
  Belkin router - G and complementary wireless card (a good old now a few years but run perfectly in XP)
  -P4HT 3 GHz, 2 GB system
  -Very little software installed to date (software the only thing I can think of Buffalo NAS relevent)

  Anyone with a similar experience? It's driving me crazy!

  See you soon!

  Hello DizzyEgg,

  Thank you for posting.  Transitional issues are most frustrating to resolve.  I think that this problem is with your wireless card.  If your PS3 and other devices are not the problems to give up the connection to your router this supports the hypothesis that the problem is in your wireless NIC.  We have seen that many times on this forum and I personally had the same problem with a wireless card.  The symptoms are identical, will connect for awhile, and then abandons the connection while still showing a strong wireless signal.  You can reconnect manually for a few minutes, and then the connection drops again.  Restart Windows seems to fix the problem than to have the connection after a variable duration.  Unfortunately, the only step in troubleshooting to verify this is to replace the wireless NIC card to test if the connection will be held with the new card.  Since you admit that the map is several years old that increases the likelihood of this being a transient failure on the NETWORK card wireless itself.

  Thank you

  Jack

  Jack
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Hang & restart problems after Vista updated August 11, 2010

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  You are posting in the wrong Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  Mick Murphy - Microsoft partner

• card network - need to restart problems

  Original title: adapter

  Why do I have to restart my computer to solve the problems of network card?

  Hi Robert,.

  Sorry for the late reply.

  Please provide us with the following information so that we can help you further the question:

  (1) what is the specific issue you're having with your adapter?

  (2) what is the brand and model of the computer

  I suggest you follow the steps described in the article below and see if it helps:

  http://Windows.Microsoft.com/en-us/Windows/fix-network-adapter-problems#1TC=Windows-8

  Hope this helps, get back to us if you need further assistance for Windows.

• PIX 515E failover restart problems

  Thursday, November 23, we went from the PIX cluster to version 7.1 (2) 6.2 (2) with the default memory (64 MB) in each PIX. The Active PIX then suffered what appeared to be leaking memory (attributed to process ARP Thread). This continued for a few days? with the result that we force reloaded the Active PIX every 8 hours to ensure the continuity of the service. Monday 27 after a reload? It has been noticed that the Active PIX leaked is more memory per process threads ARP? the same day, we went from the cluster PIX to 128 MB of memory. Then, we have had failovers active / standby every 2 hours? that seems to be attributed to missed? Hello? in the e-mail of failover? We decided then to configure LAN failover on the PIX cluster. In the process of activation of this secondary feature PIX (which was the current asset) crashed

  You have any explanation as to why these events took place.

  Hi Carlton,

  I can tell you that maybe the method you used to upgrade starts the chain of problems. I used for the migration of these products and I've never met before. In general I WINS configurations, program a service stop and I leave the unit of failover working alone while I do the upgrade of the unit the ex-active. After the upgrade, I had loaded the software configuration I saved before and made the customizations.

  For the PIX without restrictions, is real memory of 128 MB required. For the restricted permission, you can use the default of 64 MB.

  After that, you can place the active unit instead of the recovery. You improve the unit of failover so and connect again in active, already in production and restart the synchronization.

  For all my clients, it worked.

  It will be useful. If Yes, please rate.

  Kind regards

  Rafael Lanna

• Merge request customization Configuration problem...

  Hi Experts,

  For customizing the Application of Oracle Fusion, I try to configure the JDeveloper. I do the procedure below

  1 installation and JDeveloper update.

  2.i can able to see the request for merger two role (selected Fusion Application Developer)

  3. to configure the weblogic server built-in, I gave

  3.1) username, word password, confirm the password, address, port

  3.2) I choose user data fusion as fusion_runtime and give details of login password and the application

  3.3) I configured each patterns with their password... but for the owsm_mds schema, I created in separate database and I gave the details of database for the owsm_mds

  3.4) gave the LDAP details

  Click on 3.5) finishing

  After doing all the steps, "field of integrated treatment Weblogic completed successfully" message came in the newspaper. Then the FADevConfigure.py file is opened automatically. If I close this file

  'default domain successfully re-created and configured.' message came then in the newspaper. But the weblogic integrated watch "cannot establish a connection. I tried several times but not able to solve it please guide me...

  

  Kind regards

  Ove

  You have Python installed and in the path? The fact that its open in a text editor instead of running it seems to suggest there is a problem with the installation of Python. Take a look at:

  • JDeveloper and application of Fusion explained (part 2)
  • JDeveloper and application of Fusion explained (part 3)

  --

  Jani Rautiainen

  Relationship with the developers of Applications in fusion

  https://blogs.Oracle.com/fadevrel/

• Users randomly requested to restart when they connect

  See 5.1.2.  Non-persistent pool with active persona.  Randomly, users will be asked to restart the virtual machine when they connect.  We tried several versions of the agent, no difference.  Only happens not each time or each user.  I can keep connect power about 20 times... get 20 different VMs (clones all connected) and maybe see invites him to restart once or twice.  This * seems * was related to the persona somehow, since it is the only pool that we have with the character and the only pool with this problem.  Anyone else seeing this?

  Thank you all!

  JCkelsey,

  This may help: http://communities.vmware.com/thread/435615?start=0&tstart=0

  We have our distributed vm on 3 servers.  All with different processors.  We'll know if it worked in the morning.

• Rolling restart problem

  I have an environment with 2 servers. I did climb on server 2. When I reboot under coreapplication in EM, it fails to completely start coreapplication, but if I go to the availability tab and start it, there, I have no problem. Restarting under coreapplication don't apply to a unique environment and once the environment is put on the scale must be on the availability tab?

  Hello

  Just to cross check, haven't you set up controllers BI Cluster by specifying the primary and secondary server cluster controllers details here, EM > Capacity Management > availability > scroll down, you will see ' Primary/secondary Configuration' > Configure Cluster BI controllers

  Rgds,
  DpKa

• Tablet Toshiba AT100 restart problem

  Hi all

  This is probably not the place to ask but don't know where.

  I am currently facing a problem where the opening sequence keeps popping up every 30 seconds to 1 minute.

  Anyone know what is the problem and how to fix it?

  Have you tried to reset the AT100?
  To perform the reset of data, follow the steps below:
  Click applications > settings > privacy > data reset > Reset tablet > clear all.
  Factory data collection will be done.