Required for PeopleSoft Campus Solution firewall ports

Dear gurus,

We are using PeopleSoft Campus Solution and running on Windows Server 2008 R2. Now, we are working on the conduct of firewall does so we can allow only the required ports for the application to work. Could you please tell what are the ports required on the demand side?

Thank you.

Only two ports is required to open the firewall if you use SSL and NON SSL via internet.

Assume that your Web server uses port 80 and 443 for SSL and Non SSL respectively. Then, you need to open these 2 ports in the firewall.

Hope that helps.

P.S. Please check reply as an useful answer or appropriate so that it is useful for others who have the same issues. @

Tags: Oracle Applications

Similar Questions

  • Application for Admission online by campus Solution 9.0: download AAWS

    People,

    Hello. I have implemented PeopleSoft Campus Solution 9.0 revision 5 for a University. I finished the implementation of all application modules. Now, I will develop the application for Admission online for future student to apply for admission.

    My installations are below:

    Server machine: Oracle Linux 5.10

    Client computer: Windows XP Professional

    Database server: Oracle Database 11g

    The version of PeopleSoft: 8.53 PeopleTools and PeopleSoft Campus Solution 9.0 R5

    Because Linux doesn't have a graph feature, I also install PeopleTools 8.53 in the Windows XP client computer to run the applications and Data Mover Designer.

    To develop the application for Admission online, I need to install AAWS (Admission Application Web Service) 9.0 Solution Campus.

    According to the document, Bundle 18, 19, 20, 21 and 22 are the AAWS software.

    I checked http://eDelivery.Oracle.com , the current version of PeopleSoft Campus Solution is 9.2

    I don't see anywhere to download Bundle 18, 19, 20, 21 and 22 of AAWS.

    My question is:

    Where to download the Bundle 18, 19, 20, 21 and 22 to AAWS develop the online admission application?

    Thanks in advance.

    Your follow-up questions are all loaded with questions. You'll have to read on many subjects, and he will never be in direct response to these requirements.

    First of all, in the browser, browser Solution Campus, what elements are sent to AAWS? As constituent Transaction management?

    You must read PeopleBooks and understand it. There is no navigation to AAWS, it is a web service. There are a few configuration associated with pages you will need to refer to PeopleBooks.

    Secondly, what machine to install Oracle ADF? Oracle Linux 5 Client machine or Windows XP Server?

    ADF must be installed on your client for the development (similar to the designer of the App). Yet once, consult PeopleBooks and documentation on My Oracle Support (unfortunately without an id of support that you will most likely have trouble). If you have specific problems during the installation process of the people may be able to help.

    Some reference material on ADF:

    https://blogs.Oracle.com/Shay/entry/using_adf_with_peoplesoft_-_We

    http://www.Oracle.com/technetwork/topics/OFM-PSFT-getting-started-087159.html

    https://blogs.Oracle.com/FMW4PeopleSoft/entry/create_a_rich_ui_for_peoplesof

    Graham PeopleSoft blog: mobile applications for PeopleSoft

    In addition, you can consult the books of Jim Marion:

    http://www.Amazon.com/PeopleSoft-PeopleTools-techniques-Oracle-Press/DP/0071664939

    http://www.Amazon.com/PeopleSoft-PeopleTools-mobile-applications-development/DP/0071836527

  • Campus solution 9.0: why personal information regional Page doesn't have 5 countries?

    People,

    Hello. I'm working on 9.0 Solution on a University Campus. I'm working on the module of Community Campus. I face a problem like below:

    Campus Community > personal information > add/update a person > regional page

    According to the PeopleBook Campus Community 9.0 Basic Page 448, stating: "from the date of this publication, Canada, Netherlands and USA the functionality is available in a PeopleSoft Campus Solution."

    There are 5 regional countries: New Zealand, Australia, Canada, Netherlands and USA.

    But in my computer, there is none of the 5 countries in regional page.  I checked it by steps as below:

    Step 1:

    Set Up AWAR > install > Installation of Campus Community: activate all options.

    Step 2:

    Set Up AWAR > install > Installation Admin student: activate all options. On the features of his page, I turn on CRM, AUSTRALIA, CANADA, New Zealand, Netherlands, United Kingdom.

    Step 3:

    In the Manager of the trees, I created a tree of the AREA to provide data in the area of recruitment and admission for the different regions for the University.

    I find no error concerning regional page doesn't have the 5 countries: New Zealand, Australia, Canada, Netherlands and USA.

    My question is:

    How to solve the problem that "Community Campus > personal information > add/update a person > regional page" doesn't have the 5 countries?

    Thanks in advance.

    If you look at the regional Page in the App Designer, you will find that it has only the following subpages which vary by country:

    SCC_PERS_ANZ_SBP - New Zealand specific (there might be some similarities with the Australia as well)

    SCC_PERS_AUS_SBP - Australia

    SCC_PERS_CAN_SBP - Canada

    SCC_PERS_NLD_SBP - Netherlands

    SCC_PDE_USA_H - USA

    If there is no page void specific to the country you're looking for then it would be so not something to display.

    If you want to know the workings of this page in detail, I suggest you run a SQL and PeopleCode trace on the page and see how the page is loaded (including any country-specific logic).

    Thank you.

  • Required for NAC firewall ports manager manage/add the Cisco switch

    Hello

    I am trying to add switches cisco for the NAM, but I am not able to add the switch I get the error "unable to control switch" I tried opening ports 161-162 on the firwall; If I were to allow all traffic between the NAM and the switch, cisco NAM is able to add/manage the switch.

    Do not know what are the other ports may be required for cisco NAM for managing the switch?

    Thank you.

    Hello

    As far as I KNOW, only UDP 161 and 162 for SNMP communication ports must be open.

    Please make sure that you have configured the correct port on the switch:

    (config)# snmp-server host 172.16.1.61 traps version 2c cam_v2 udp-port 162 mac-notification snmp 

    If still does not, I would check the logs on the firewall for any traffic blocked between the cam and the switch.

    HTH,

    Tiago

    --

    If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

  • Cisco Clean Access Update website and Firewall Port required

    Hello

    I was wondering if anyone might know the site that would be to use the clean Access Manager to put as well as the required firewall port. This is due to a firewall in place. From reading, do not know if it uses another website besides as the next http://www.perfigo.com/clean_machine_1/version-se.txt on port 80.

    Thank you.

    Hello

    For CAM checks and update the rules, this is the only site required.

    HTH,

    Faisal

    --

    If you find this article useful, please note so that others can easily find the answer

  • Campus solution 9.0: Online Admission Application Web Page

    People,

    Hello. I implement Campus Solution 9.0 revision 5 for a University. I'm developing a Page for Admission online on the Web Application for prospective students to apply for admission.

    It seems that Campus Solution 9.0 Feature Pack 3 AAWS on Self Service service.

    See Oracle shows Admission Applications Web Services for PeopleSoft Enterprise Campus Solutions

    But I do not see Feature Pack 3 download on http://eDelivery.Oracle.com .

    My question is:

    People give document and guideline to develop the Page of Web Application of Admission online for prospective students to apply for admission?

    Thanks in advance.

    Try this and let us know the results:

    1. first of all, make sure that the pssqlora.dll file is correctly located under % PS_HOME%\bin\client\win86.
    2. Server Scheduler and Application process requires once 64 bit and 32 bit Oracle database Clients.to to run. Make sure it is added on ALL these servers.
    3. then, is to reconfigure the application servers and servers of process scheduler to update the psappsrv.env file.
    Select set up this domain in the domain PeopleSoft PSADMIN Administration menu.
    B. Reconfigurez the Application Server domain to add the 32 or 64-bit client for the path.
    C. recharge area of the application server configuration, and then restart the domain.
    D. Repeat for batch servers.
    4. after reloading area of Application Server & Process Scheduler configurations, verify that the path of psappsrv.env now contains references to directories of binary 32 bits and 64 bits.
    5. run the Test call PeopleTools Remote.

  • What are the network requirements for the remote server of the Panel?

    What are the network requirements for the remote server of the Panel?

    I tried for awhile now to set up a Control Board.  I can connect to my remote panel of computers from other computers on my local network but nowhere else.

    Whenever I use web publishing tool gives me a URL in this format: Http://Computer-Name.Corporate-Name.local:8086 / VI - nom.html apparently it means I have a local DNS server and this URL is meaningless to the public.

    When I try to connect with the Operate > Connect to... remote control, I get this error message:

    "Connection to Server remote panel...".
    "Connection refused by the server remote control specified: make sure that the LabVIEW Web server is enabled on the specified server.

    I got the same error when I tried to host a remote panel from my laptop at home, on my Wi - Fi.  Is there some network settings or firewall I'm not seting?  Would it be my server or the router or the private network?

    My goal is to be able to host remote panels of my laptop while I'm on the international scene, creating using 4 G internet mobile.  Is it still feasible?

    As he Turners on my router had to be put in place so that my Port is in the rage of transfer.  Also I had to disable DHCP.  Without that you cannot host behind a router.

    These are the instructions I put fallow:http://digital.ni.com/public.nsf/allkb/B1E9A3D78BAED949862573AD0065D4D2

  • Can HRMS and Campus Solution 9.0 install with PeopleTools 8.49?

    People,

    Hello. I installed FSCM 9.0 with PeopleTools 8.49 and applications work properly.

    I want to install 'HRMS and Solution Campus 9.0' in the operating system Windows Server 2003 where the FSCM 9.0 are installed and PeopleTools 8.49.

    I checked the installation guide for 'HRMS and Solution Campus 9.0'. But some Guide says that it can be installed with PeopleTools 8.48.05 or higher. A few other indications said 'in order to launch HRMS 9.0, you must use PeopleTools 8.50.03 or later version.

    Can people you tell me the correct version of PeopleTools to install 'HRMS and Campus 9.0 Solution'?

    Thank you.

    Can people you tell me the correct version of PeopleTools to install 'HRMS and Campus 9.0 Solution'?

    Initially, the HRMS9.0 was built on PT8.48. but it was recuted. Right now, Peopletools 8.50.03 are required, as explained in the doc pulled http://edelivery.oracle.com readme.
    Take a look at this:
    Re: Error after Sucesfull identify you in PIA

    Nicolas.

  • Windows failed to update for HP - Bus USB and Ports, display controllers - HP w2408 widescreen LCD

    I have a new HP M9402 desktop with monitor Hp W2408 Summit.  I get a message to update windows for HP - Bus USB and Ports, display controllers - ACL from HP w2408 widescreen, but the windows download always fails.  I tried several times to download this update.

    Any help would be greatly appreciated.

    Hi all

    The solution to my problem of not being able to make updates to the window was to spend in an HDMI instead of VGA cable.

    BR / / JJG

  • Can someone link me to some documents that NetBIOS is required for devices inherited from Windows to function properly?

    NetBIOS and Windows Legacy Machines

    Can someone link me to some documents that NetBIOS is required for devices inherited from Windows to function properly?

    Maybe even a link to a Microsoft web page that States this as well.

    I understand the security risks inherent with opening ports 135 and 139, but they are needed within the network for some devices to function correctly, just need a documentation that indicates that.

    Hello

    See the links below and check if that helps.

    http://TechNet.Microsoft.com/en-us/library/bb727013.aspx

    http://TechNet.Microsoft.com/en-us/library/cc940063.aspx

    http://TechNet.Microsoft.com/en-us/library/cc738412 (WS.10) .aspx

    Thank you

  • Error - Rome: Total War did not find DirectX 9, which is required for the game to run. Please reinstall DirectX.

    Original title: problems running Vista on Bootcamp DirectX.

    I have browsed the web for the last little while and cannot find any solution.

    I am trying to run Rome Total War on Vista, on bootcamp on my iMac 27 ". However, every time I start the game is active an error message saying "Rome: Total War has not find DirectX 9, which is required for the game to run." Please reinstall DirectX.

    I've been searching the net and have used some DirectX downloads (9) on several trusted sites, but the error message always everytime that I try to run the game.

    I have 'Run' 'dxdiag' and on the 'system' tab is says I have DirectX 11, section 'Information System '.

    I do not know where to go from here, any help would be greatly appreciated

    Have you installed this installation?

  • When you try to download iTunes I get the following error ' there is a problem with this windows package install a program required for this install complete could not be run.

    Problem Windows install

    When you try to download iTunes I get the following error ' there is a problem with this windows package install a program required for this install complete could not be run.

    I looked at several forums and tried cleaning patches, etc they suggest.  I also tried to download Windows Installer 4.5 but keep says "the update does not apply to my system" (I tried all.)

    I am running Windows Vista and have downloaded the service pack 2 (one remedy suggestions!)  Someone out there has a solution?

    Hello, Atwitsend...,

    Try to repair.
    Go into Add Remove Programs, then select Apple Software Update > change > repair.

    If this does not work, try to uninstall. .

    Remove and reinstall ITunes, Quicktime, and other software components
    http://support.Apple.com/kb/HT1923

    Download the iTunes Installer and save it on your desktop.

    http://www.Apple.com/iTunes/download/

    Try to install iTunes using the installer that you saved.

  • Upgrade Vista to Windows 7 error: "Windows cannot copy files required for installation. The files may be damaged or missing. Error Code Ox80070017.

    I am upgrading of Windows Vista Home Premium (32-bit) for Windows 7 Home Premium (32 bit) - but getting stopped everytime I try, I end up with a dialog box stating: "Windows cannot copy files required for installation. The files may be damaged or missing. Make sure all files required for installation are available, and restart the installation. Error Code Ox80070017.

    What should I do to resolve this problem and allow full of Windows 7 installation? (my computer is a Compaq Presario V6000).

    Hello

    What installation media you are using?

    Method 1:

    Error 0 x 80070017 translates "CRC error" which means that the files that are copied from the disc are not making it to the hard drive with the same structure, which means that the 'original' the disk files are modified/changed/corrupted while being copied to the location of the 'destination' on your disk during Setup.

    This usually means a bad DVD, or an error reading on the DVD player.

    I suggest you follow the link and check.

    Upgrade Windows Vista to Windows 7

    http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7?T1=tab02

    Method 2:

    Temporarily disable the antivirus on the computer running software and check if you are able to install the software.

    Disable the anti-virus software

    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

    WARNING: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Enable or disable Windows Firewall

    http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

    WARNING: There may be loss of data through an analysis using firewall to eliminate the virus as appropriate

    Method 3:

    I also suggest you to follow the link and check.

    Check your hard drive for errors

    http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

    Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  • This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

    Original title: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel

    This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in the graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel, what do I do to fix this help please.

    Jake

    Hey Jake,

    Follow these methods.

    Method 1: Follow these steps:

    (a) restart your computer if you have not already done so. There is always the possibility that the error Code 31 that you see was caused by a temporary problem with Device Manager. If so, a simple reboot can solve the Code 31.

    (b) have you install a device or a change in the Device Manager, just as the Code 31 error appeared? If so, it is very possible that the modification caused the Code 31 error.

    (c) cancel the change if you can restart the computer and then check again the error Code 31. Depending on the changes, some solutions may include:

    Remove or reconfigure newly installed unit.

    Restore a version prior to updating the driver.

    Use system restore to undo the Device Manager recent related changes.

    http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

    (d) to remove the registry values filters upper and lower. A common cause of errors in Code 31 is the corruption of two registry values in the class of the CD-ROM/DVD-ROM drive registry key.

    Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

    Method 2: Update the latest graphic drivers.

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  • Download iTunes 10.5 error: "there is a problem with this windows package install." A program required for this install to complete could not be run. »

    I tried to update my ipad to the latest version of the software, but I couldn't be updated without the latest version of iTunes. So I tried installation but then right, when I arrived at a certain point it to install it, I got this message:
    There is a problem with this Windows Installer package.
    A program required for this install to complete could not be run.
    Contact your provider to support personal or package.

    I have dealt with this problem for several hours now, without solution. I feel like I've tried everything. Please help me.
    CPU info:
    Windows Vista Edition Family Premium(32bit)
    Windows Vista (Service Pack 2)
    Windows install 4.5
    Please help, it drives me crazy!

    Try to re - download and install again. Also, make sure that your username does not contain special characters.

    If this does not help, try to contact Apple for assistance.

Maybe you are looking for