Required LIBS in the .pro using QAccelerometer, QAccelerometerReading file

Similar Questions

• What systems the Pros use for the first, After Effects and SpeedGrade?

  I bought the complete creative cloud in the hope of a career for me in editing audio/visual. The problem is my system doesn't seem to be able to manage the software, especially when changing back and forth between the three programs mentioned above. In addition, my first project cannot export correctly. In addition, throughout its development the offbeat bad system. And that's after following all of the recommendations of preferences available under tutorials Adobe and elsewhere on the Web.

  Here is my system:

  SYX-P67A-C43: Intel Core i7 2600 (a unit of 8 strands) to 3.4 GHz with 8 GB of RAM (which will be soon 16) with a NVidia GTX 550 card, 1Gig of RAM.

  As you can see, it's well beyond what Adobe claims to be the minimum requirements. It is obviously NOT the case.

  What systems the Pros use (like the guys in the tutorials) for the first, After Effects and SpeedGrade? Give me accurate machines with all the specs so I can a price upward.

  Right now X 99 with DDR4 gives best performance for media applications of particular content with GPU acceleration. I suggest an I7 5960 X, 32 GB of DDR4 2666, 980GTX video card and Asus X 99 board with storage depends on the media. Far, who will perform the 2600 is old of 2 generations at this stage, which is only a Quad core with HT. The same X 99 tips can also manage the Xeons V3 if you upgrade the processor in the future for a larger load in real-time.

  Eric

  ADK

• Error in Windows Media Player 11 "PLAYER COULD NOT SUPPORT TYPE or THE CODECS USED TO COMPRESS FILE" "

  I have been using the player above since the issue is and have had no problems so far.

  For some inexplicable reason, I was not able to play any music saved through this player. Whenever I try, I get he message sits on the screen: -.

  "PLAYER DOES NOT SUPPORT FILE TYPE OR THE CODEC USED TO COMPRESS THE FILE.

  I use Windows 7 Home Premium 64. I have not changed the parameters of the media player I've always been very happy to use it as it came.

  Can someone come up with a solution to this please?

  Thank you.

  Hi Olly,

  This problem may occur if the Windows Media Player settings are corrupt.

  If you were able to play the same songs earlier by the player, run the troubleshooting of Windows Media Player settings to solve the problem:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  If it is a different set of media files, you can check if the required codec is already installed or present to play. Here is an article that provides all required information related codecs:

  http://Windows.Microsoft.com/en-us/Windows/codecs-frequently-asked-questions#codecs-frequently-asked-questions=Windows-8

  In addition, you can find the media list of the types of files supported in Windows Media Player:

  http://support.Microsoft.com/kb/316992/en-us

  Please let us know if the problem still persists.

• How to get the path (using < input type = "file" / >)

  Hello world

  I create a HTML form that has an entry of type = "file".  This will give you a dialog box browse for your user to search for a file on the operating system.

  And my code:

  function handleFileSelectForMyShop (evt)
  {
  var blnFileReaderSupported = false;

  Try
  {

  Debug.log ("handleFileSelect", "start handleFileSelect");
  reader of var = new FileReader();
  blnFileReaderSupported = true;
  var files = evt.target.files;
  var size = files.length;

  Debug.log ("handleFileSelect", "handleFileSelect # selected files:" + size, debug.info);

  for (var i = 0; i)< size;="">
  {
  Debug.log ("handleFileSelect", "in the handleFileSelect analysis the index file" + i, debug.info ");
  var f = files [i];
  Reader.OnLoad = (function (theFile)
  {
  Debug.log ("handleFileSelect", "start reader.onload", debug.info);
  return Function
  {
  Debug.log ("handleFileSelect", "start Function", debug.info);

  Debug.log ("handleFileSelect", "reading file" + theFile.name + "(" + theFile.size + "") "" + theFile.type, debug.info);

  If (theFile.type.match ('image.*')) {}
  var path = e.target.result;
  alert (path);
  create the path

  } else {}
  jAlert ("Please select photo!', 'Error'");
  }
  };
  })(f);

  If ((f.type.match ('image.*')) |) (f.type.match ('audio.*')) | (f.type.match ('video.*')))
  {
  Debug.log ("handleFileSelect", "in handleFileSelect call reader.readAsDataURL for type" + f.type, debug.info);
  Read in the media file in the form of a data URL.
  reader.readAsDataURL (f);
  }
  }

  Debug.log ("handleFileSelect", "Complete", debug.info);
  }
  {} catch (e)
  Debug.log ("handleFileSelect", e, debug.exception);
  If (! blnFileReaderSupported)
  {
  Alert('Error.) The FileReader API is not supported. ") ;
  }
  }
  }

  function doPageLoad()
  {
  Try
  {
  ELE var = document.getElementById ('txtFile_staffInfo');
  If (ele)
  {
  ele.addEventListener ('change', handleFileSelectForMyShop, false);
  }
  imgSelectPictureClick = 0;
  }
  {} catch (e)
  Debug.log ("doPageLoad", e, debug.exception);
  }
  }

  window.addEventListener ("load", doPageLoad, false);

  Note: And alert (path) leads to a Base64 string! It is not a path of the image that I browse a Spain file on the operating system.

  I want to have a full path of the file. For example: file:///accounts/1000/appdata/WebWorksAppTemplate.testa3NBcHBUZW1wbGF0ZSAgICA/shared/camera/image01.jpg

  I hope to see your reply soon!

  Thank you and best regards,

  A Pham

  A Pham

  I think that you can not get the absolute path of a file due to browser security, when you use the

  It's something that you need probably a PlayBook extension for.

• Trying to find the font used in an file under license

  I bought a license, but the text is not editable, but in the paths.

  How to find the police for this file, I can not also know how to contact the artist directly.

  https://stock.Adobe.com/search?k=109336435

  File # 109336435

  You can't contact contributors. The best way to find the police or narrow fonts is in Photoshop using the new font matching tool. In the screenshot below, the font used for the text "Summer picnic" is, or is very close to 'DIN Condensed Bold'...

  

• Adjust overall color of the process used in multiple files open at the same time?

  I often draw series of illustrations (maps) using the same overall color of the process and later to adjust the value of the color in all the files.

  In previous versions of Illustrator I just all the open files and adjust the color values in a single file and all other files automatically got the same values and could still be saved.

  This does not work in Illustrator CC 19.1.

  How to do this in a way effort now?

  Please tell the history of the ease of sharing 'lost in versions '.

  I asked at the start of the best technical sharing and setting/editing of uniform colors between multiple documents.

  We cannot link to a shared color palette and just edit this palette because the colour palettes apply only to the actual document when used.

  I tried a work-around, which probably works for my needs, is the attached illustration.

  I work with a set of four-color CMYK defined as Global colors, so I only need to adjust the CMYK values in the color chart to affect all the colors used in the document.

  But this only applies to the actual document and does not, when objects are copied/pasted between similar files.

  Instead, if I name the Global CMYK color chart (e.g.Pink) definition instead of simply use process values (0-70-20-0), give me a change to update a definition when copying objects between similar documents. If I choose "Merge swatches" in the dialog box "Swatch Conflict", the old 'Rose' (original) color will be updated to the new definition of the "Rose".

  This could be useful for others?

  

• Make changes to the source using ANT (ojdeploy) files

  Hello
  
  Assume that you have an application that uses a Web Service data control. The URL of the WSDL file will be hard coded in the connections.xml (indicated by DataControls.dcx). But of course, during the deployment in a different environment (from dev, in tst, in ACC, in production), this hard-coded URL will be replaced by the corresponding environmental WSDL document. My idea was to solve this problem using Ant.
  
  I have already created a build.xml Ant file that uses ojdeploy to build the project as an EAR file. This is the code in build.xml generated to make the deployment:
  

  <target name="deploy" description="Deploy JDeveloper profiles" depends="init">
     <taskdef name="ojdeploy"
                   classname="oracle.jdeveloper.deploy.ant.OJDeployAntTask"
                   uri="oraclelib:OJDeployAntTask"
                   classpath="${oracle.jdeveloper.ant.library}"/>
     <ora:ojdeploy xmlns:ora="oraclelib:OJDeployAntTask"
                    executable="${oracle.jdeveloper.ojdeploy.path}"
                    ora:buildscript="${oracle.jdeveloper.deploy.dir}/ojdeploy-build.xml"
                    ora:statuslog="${oracle.jdeveloper.deploy.dir}/ojdeploy-statuslog.xml">
        <ora:deploy>
           <ora:parameter name="workspace"
                                    value="${oracle.jdeveloper.workspace.path}"/>
           <ora:parameter name="project"
                                   value="${oracle.jdeveloper.project.name}"/>
           <ora:parameter name="profile"
                                    value="${oracle.jdeveloper.deploy.profile.name}"/>
           <ora:parameter name="nocompile" value="false"/>
           <ora:parameter name="outputfile"
                                    value="${oracle.jdeveloper.deploy.outputfile}"/>
        </ora:deploy>
     </ora:ojdeploy>
  </target>

  How can I edit the build.xml file to adjust the URL to the WSDL for the Web Service (for example in DataControls.dcx) before you deploy the code on an EAR file?
  
  For example, if the DataControls.dcx has the following entry after having created the control data:
  

  <definition xmlns="http://xmlns.oracle.com/adfm/adapter/webservice"
                    name="MyWebServiceDC" version="1.0"
                    provider="oracle.adfinternal.model.adapter.webservice.provider.soap.SOAPProvider"
                    wsdl="http://dev_server:7001/soa-infra/services/default/MyWebService/Dummy_ep?WSDL">
     <service name="Dummy_ep"
                   namespace="http://xmlns.oracle.com/MyWebServiceOutput/MyWebService/Dummy"
                   connection="MyWebServiceDC">
        <port name="execute_pt">
           <operation name="execute"/>
        </port>
     </service>
  </definition>

  Then I would be able to edit this file for:
  

  <definition xmlns="http://xmlns.oracle.com/adfm/adapter/webservice"
                    name="MyWebServiceDC" version="1.0"
                    provider="oracle.adfinternal.model.adapter.webservice.provider.soap.SOAPProvider"
                    wsdl="http://dev_server:7001/soa-infra/services/default/MyWebService/Dummy_ep?WSDL">
     <service name="Dummy_ep"
                   namespace="http://xmlns.oracle.com/MyWebServiceOutput/MyWebService/Dummy"
                   connection="@connection@">
        <port name="execute_pt">
           <operation name="execute"/>
        </port>
     </service>
  </definition>

  where @connection @ is an Ant token, which can be replaced by the Ant in the relevant environment. For example, MyWebServiceDC_dev, MyWebServiceDC_tst, MyWebServiceDC_prd etc.
  
  The same issue if you use a Web Service Proxy: the URL of the Web Service is hard coded into the generated Java files, so I would like to change the location of this URL using ANT instead of having to do it by hand.
  
  Is this possible?
  
  Thanks in advance!

  Chris,

  Yes, there is no real way to do this automatically. Usually, what I do is to keep a copy of the shadow of these files in a separate Directory. Any time one of the files changes, I have a copy in the shadow directory and either do one of two things:

  (1) replace all values specific to the environment with chips
  (2) create specific versions to the environment of the files with the appropriate values.

  Then, in the ANT script, you can do this:

  (a) copy the original files somewhere safe (temp directory).
  (b) copy the tokenised files or specific to the environment to the correct location
  (c) use on the tokenised file if it was your approach
  (d).
  (e) deliver the original files.

  This is a hack, but that's life.

  John

• Extension of merger and mailing 4.1.0 says «no recipients specified...» "has {{Email}} in the line using a CSV file

  Attempt to send email from MASS of Thunderbird. I have the address of a CSV file in a column named Email. I {{Email}} in the TO: field of the email - and go through file-Mail Merge and have the CSV file in the dialog box. When I click on OK - I get the message 'no recipients were determined... ". »

  Wile, we do not support the add-on here.
  As a convenience.
  Most of the problems of this nature with the add-on will focus on how the email header is defined in the CSV file. Make sure it is defined as the domain name, you think it is and that it is surrounded by double quotes. Also make sure that none of your "data" contains quotes like send the CSV into a spin, introducing this amount on a Cape randomly in the middle of data.

  Failure to comply with this e-mail from the author of the add-on. His email address is on the page of download add-on.

• Unable to fill the label for the accessor using xliff/properties file

  Hi all

  I have a requirement where I want to fill the label for a resource group accessor, but its not filled with the value of the key provided in the label.

  The portal bundle has after the entry:

  CUST_ADD = address of the customer

  and I'm on the underside of the piece of code in the pagedef.xml to make the address of the client on the user interface

  < accessors >

  < item Value = "custAddList".

  Label = "#{adfBundle ['PortalBundle'] ['CUST_ADD']}" / >

  < / accessors >

  But it gives following error on the user interface:

  STRINGMANAGER: Key: "#{adfBundle ['PortalBundle'] ['CUST_ADD']} ' is not in the whole"oracle.javatools.resourcebundle.ResourceBundleRT ".

  Can someone tell me how fill us this resource group label.

  Thank you

  Garima

  Hello

  I managed to solve the problem by providing the full qualified path of all the resource as shown below:

  Label = "#{adfBundle [' portal.]}" "{[PortalBundle'] ['CUST_ADD']}" / >

  Thanks for all the help!

• Create the Excel using Indesign javascript file

  Hi all

  We can create csv file using indesign javascript. Is there a way to create excel file using indesign javascript?

  Thanks in advance

  Hi all

  It is a way to generate an Excel from an InDesign table by using a combination of jsx, vbs and applescript.

  Quite a long discussion on that Open with below is a better application of the suggestions here.

  // Exports SIMPLE tables to proper excel file single and double quotes in the table would have to be escaped on the Mac version
  // Does not take Unicode file names
  // with a bit of brain racking can be developed to deal with merged cells and nested tables
  // Pieced together by Trevor (wwww.creative-scripts.com coming soonish) based on the referenced sources
  // Sold AS IS https://forums.adobe.com/thread/1718021
  
  var doc = app.properties.activeDocument && app.activeDocument,
         myTable = myTable || getTable (doc);
  if (!myTable) {alert ("Take a break, needs a document with a table in it!"); exit();};
  var filePath = new File (Folder.temp + "/" + +new Date + ".xlsx"),
      osFilePath = filePath.fsName;
  if ($.os[0] === "M")  osFilePath =  osFilePath.replace(/(.)(\/)/g,"$1:").replace(/\//, "");
  
  exportTable (myTable, osFilePath);
  if (confirm ("Open new excel file")) filePath.execute(false);
   exit()
  function exportTable (myTable, filePath)
      {
          var  numberOfRows = myTable.rows.length,
                 rowNumber, columnNumber,
                 isMac = $.os[0] === "M",
                 rowContents = [],
                 setRange, openMark, closeMark;
  
          if (isMac)
              {
                  setRange = 'set value of range "A';
                  openMark = '" to {';
                  closeMark = '}';
              }
          else
              {
                  setRange = 'app.Range("A';
                  openMark = '") = Array(';
                  closeMark = ')';
              }
  
  for (var z = 0, rowNumber = 0; rowNumber < numberOfRows; rowNumber++) {
      var  numberOfColumns = myTable.rows[rowNumber].columns.length,
              toRange = GetExcelColumnName (numberOfColumns - 1),
              columnContents = [];
       for (columnNumber = 0; columnNumber < numberOfColumns; columnNumber++) {
           var cellContents = myTable.rows[rowNumber].cells.everyItem().contents;
           columnContents  = '"' + cellContents.join('", "') + '"';
       }
      rowContents[rowNumber] = setRange + ++z  + ":"  + toRange+ z + openMark  + columnContents + closeMark;
  }
  
  var tableData = rowContents.join("\n") + "\n";
  
                 if (isMac)
                      {
                          // Thanks Hans https://forums.adobe.com/message/5607799#5607799
                         var myAppleScript =
                          '''set excelRunning to isRunning("Microsoft Excel")
                             tell application "Microsoft Excel"
                             set theWorkbook to make new workbook
                             tell sheet (1) of theWorkbook'''
                             + tableData + '''
                             end tell
                             save workbook as theWorkbook filename "''' + filePath + '''"
                             close active workbook
                             if not excelRunning then tell application "Microsoft Excel" to quit
                             end tell
                             on isRunning(appName)
                                  tell application "System Events" to (name of processes) contains appName
                             end isRunning
                          ''';
                        app.doScript (myAppleScript, ScriptLanguage.APPLESCRIPT_LANGUAGE);
                      }
  
                  else
                      {
                          // Thanks Calos https://forums.adobe.com/message/5607799#5607799
                          // changed by me :-)
                           var vbscript =
                           '''Dim app
                              Set app = CreateObject("Excel.Application")
                              'take away the ' from the line below if you want to see excel do it's stuff
                              'app.visible = true
                              Dim newDoc, sheet
                              Set newDoc = app.Workbooks.Add()
                              Set sheet = newDoc.Worksheets(1)
                              '''
                              + tableData
                              + 'newDoc.SaveAs "' + filePath + '''"
                              app.Quit
                              Set newDoc = nothing
                              Set app = nothing
                            ''';
                          app.doScript (vbscript, ScriptLanguage.VISUAL_BASIC);
                      }
  
              }
  
  function GetExcelColumnName (columnNumber) {// 0 is A 25 is Z 26 is AA etc.
      // parsed from http://stackoverflow.com/questions/181596/how-to-convert-a-column-number-eg-127-into-an-excel-column-eg-aa
       var dividend = columnNumber + 1,
              columnName = "",
              modulo;
  
      while (dividend > 0)  {
          modulo = (dividend - 1) % 26;
          columnName = String.fromCharCode (65 + modulo) + columnName;
          dividend = Math.floor((dividend - modulo) / 26);
      }
      return columnName;
  }
  
  function getTable (doc) { // thanks Marc http://forums.adobe.com/message/6087322#6087322
      if (!doc) return false;
      app.findTextPreferences = null;
      app.findTextPreferences.findWhat = "\x16";
      var tables = doc.findText();
      if (tables.length) return tables[0].parentStory.tables[0];
      return false;
  };
  

• Class not found in the applet using 2 jar files

  I have an applet that worked for many years as a stand alone or connecting directly to a database of derby on my home server. I just changed it to connect to MySQL on my ISP via AJAX and PHP server.
  
  I am now getting a class not found error in my browser, probably because I'm stuffing by the class path.
  
  The HTML code that I use to call the cmdlet is:
  

  <applet code="AMJApp.class" 
  codebase="http://www.interactived.com/JMTalpha" 
  archive="AMJ014.jar,plugin.jar" 
  width="500"height="500" 
  MAYSCRIPT style="border-width:0;" 
  name="jsap" id="jsap"></applet>

  The AMJ014.jar contains the applet and the support of class files.
  
  The error message is strange for me because it refers to a class, I noticed on another web page, but that has nothing to do with my applet. In any case, the message in its entirety is:
  

  load: class NervousText.class not found.
  java.lang.ClassNotFoundException: NervousText.class
       at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
       at sun.plugin2.applet.Plugin2ClassLoader.loadClass0(Unknown Source)
       at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
       at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
       at java.lang.ClassLoader.loadClass(Unknown Source)
       at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
       at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
       at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
       at java.lang.Thread.run(Unknown Source)
  Exception: java.lang.ClassNotFoundException: NervousText.class
  java.lang.UnsupportedClassVersionError: AMJApp : Unsupported major.minor version 51.0
       at java.lang.ClassLoader.defineClass1(Native Method)
       at java.lang.ClassLoader.defineClassCond(Unknown Source)
       at java.lang.ClassLoader.defineClass(Unknown Source)
       at java.security.SecureClassLoader.defineClass(Unknown Source)
       at java.net.URLClassLoader.defineClass(Unknown Source)
       at java.net.URLClassLoader.defineClass(Unknown Source)
       at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
       at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
       at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
       at java.lang.reflect.Method.invoke(Unknown Source)
       at sun.plugin2.applet.Plugin2ClassLoader.defineClassHelper(Unknown Source)
       at sun.plugin2.applet.Plugin2ClassLoader.access$100(Unknown Source)
       at sun.plugin2.applet.Plugin2ClassLoader$2.run(Unknown Source)
       at java.security.AccessController.doPrivileged(Native Method)
       at sun.plugin2.applet.Plugin2ClassLoader.findClassHelper(Unknown Source)
       at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
       at sun.plugin2.applet.Plugin2ClassLoader.loadClass0(Unknown Source)
       at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
       at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
       at java.lang.ClassLoader.loadClass(Unknown Source)
       at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
       at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
       at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
       at java.lang.Thread.run(Unknown Source)
  Exception: java.lang.UnsupportedClassVersionError: AMJApp : Unsupported major.minor version 51.0

  886473 wrote:
  Nice reference - love these movies!

  ;-)

  I recompiled those classes with the following commands:

  javac -source 1.6 -target 1.6 -Xlint:-options -classpath "C:\Users\MJHIPP\Documents\Current\Java\CodeLocal\AMJ110920\plugin.jar";"." JSHelloWorld3.java
  javac -source 1.6 -target 1.6 -Xlint:-options -classpath "C:\Users\MJHIPP\Documents\Current\Java\CodeLocal\AMJ110920\plugin.jar";"." AMJApp.java
  

  JSHelloWorld3 always works for me and AMJApp still does not work, but the error message has changed:

  I got different results. The JSHelloWorld3 now works for me (and AMJApp still does not work).

  java.lang.UnsupportedClassVersionError: AMJApp :
      Unsupported major.minor version 51.0
  

  >

  Java Plug-in 10.0.0.147
  Using JRE version 1.7.0-b147 Java HotSpot(TM) Client VM
  User home directory = C:\Users\MJHIPP
  ..
  

  BTW - I was using a JRE 1.7 until I realized it couldn't run one of my projects for pets, DukeBoxand returned to 1.6. Previously, I had read in a forum that the current version at this time there was fundamentally flawed. For this reason I have will perform purely using JRE 1.6 for the moment. Versions available for use by applets and applications of Java web start. can be configured in the Java Control Panel.

• Delete empty rows in the CSV using Xquery/XSLT file.

  Hello
  I have a CSV output file, where in it has empty lines at the end of the file, I want to delete these empty lines, can pls help on this point, that the way to delete these empty lines using Xquery/XSLT.
  
  
  sample file:
  
  20110706, O, Q, GGG, POT, LMM
  20110708, AAA, OPP, P, MAST
  20110715, BBB, TTT, O, TIN
  
  
  empty lines
  
  
  
  
  Thank you...
  
  Published by: user12679330 on July 27, 2011 12:29 AM
  
  Published by: user12679330 on July 27, 2011 12:32 AM
  
  Published by: user12679330 on July 27, 2011 12:32 AM

  I assume you are using a Proxy Service with text messaging and transport of type file or FTP to read the file and the same configuration to write the file.
  Then, you can use a simple snippet of XQuery in OSB assign or replace to remove extra blank lines:

  The editor page here is replaceing the escape characters carriage return and linefeed real CR and LF, so I described as a sample, you can replace the values in the XQuery when you use OSB,

  if (fn:contains(xs:string($body), 'CRLF'))
     then
        fn:replace (xs:string($body), 'CRLFCRLF', '')
  else
        fn:replace(xs:string($body), 'LFLF', '')
  

  In XQuery, replace CR Ð (also remove the space between & #xD and ;))
  and LF with (also remove the space between & #xA and ;))

• Access the task using the CLI

  I created a group that has access to the work in the console of the server.

  I ran the CLI work using a user associated with this group and its launch a object remote "jobs Manager" is not allowed (Code: 7 060) exception.

  Y at - it no other access that must be granted to the group in order to allow the privilege of the user running the CLI work?

  Or is it only the dnadmin user who can perform the work in the CLI?

  You can also advice how jobs are executed in CLI using encrypted password?

  The approval of the Director job: run is also necessary.

  To summarize, the following permissions are required to run the task using the CLI:

  • The job in the Console of the server
  • Job: run to the Director
  • The system administration
  • Access to the project folder containing the task

• How to write the xml data to a file

  Hi all
  
  We have a requirement of writing, the xml data in a file in the data directory in the server. Generate xml data using the SQL below.
  
  SELECT XMLELEMENT ("LINE",
  XMLELEMENT ('CELL', xmlattributes (LIKE 'column name', ' EBIZCZMDL_01'), inventory_item_id).
  XMLELEMENT ('CELL', xmlattributes (AS 'Name of COLUMN', ' EBIZFFMT_01'), attribute29).
  XMLELEMENT ('CELL', xmlattributes ("COMMON" AS "Name of COLUMN"), inventory_item_id |) '' || attribute29 | "ITM")
  "XMLDATA" AS "PRODUCE")
  OF apps.mtl_system_items_b
  
  When we try to write this query data in a file using UTL_FILE.put_line, the script gives error
  PLS-00306: wrong number or types of arguments in the call to "PUT_LINE '.
  
  If anyone can help pls...
  
  Thanks in advance

  The call to dbms_xslprocessor.clob2file is in the cursor for the specific SQL loop.

  This is obviously the problem.
  The file is replaced with each iteration.

  Do not use a cursor at all.

  See the example below, it should be close to your needs:

  DECLARE
  
     l_file_name      VARCHAR2 (30);
     l_file_path      VARCHAR2 (200);
  
     l_xmldoc         CLOB;
  
  BEGIN
  
     l_file_path := '/usr/tmp';
     l_file_name := 'TEST_XREF4.xml';
  
     SELECT XMLElement("xref", xmlattributes('http://xmlns.oracle.com/xref' as "xmlns"),
              XMLElement("table",
                XMLElement("columns",
                  XMLElement("column", xmlattributes('EBIZFFMT_01' as "name"))
                , XMLElement("column", xmlattributes('COMMON' as "name"))
                , XMLElement("column", xmlattributes('EBIZQOT_01' as "name"))
                , XMLElement("column", xmlattributes('EBIZCZMDL_01' as "name"))
                , XMLElement("column", xmlattributes('EBIZCZGOLD_01' as "name"))
                ),
                XMLElement("rows",
                  XMLAgg(
                    XMLElement("row",
                      XMLElement("cell", xmlattributes('EBIZCZMDL_01' AS "colName"), inventory_item_id)
                    , XMLElement("cell", xmlattributes('EBIZFFMT_01' AS "colName"), attribute29)
                    , XMLElement("cell", xmlattributes('COMMON' AS "colName"), inventory_item_id || '' || attribute29 || 'ITM')
                    )
                  )
                )
              )
            ).getClobVal()
     INTO l_xmldoc
     FROM apps.mtl_system_items_b
     WHERE attribute29 IS NOT NULL
     ;
  
     dbms_xslprocessor.clob2file(l_xmldoc, l_file_path, l_file_name, nls_charset_id('UTF8'));
  
  END;
  /
  

  BTW, the directory in DBMS_XSLPROCESSOR parameter. CLOB2FILE must be an Oracle Directory object, not a literal path.

• Error message: the preset used by one or more sequences in this project requires third-party components that could not find. These sequences will be changed to use a custom sequence implementation. To continue editing using the original preset, as

  Hi all

  I can't open a project PP without this error message that appears:

  "The preset used by one or more sequences in this project requires third-party components that could not find. These sequences will be changed to use a custom sequence implementation. To continue editing using the preset original, exit the application without saving the project, reinstall all third-party components that are needed, and reopen the project'.»

  What I had been doing before that to happen was a PP project using sequences ProRes for editing and editing multicamera. Several cameras didn't work very well and after a few attempts of difficulty that I gave up and finished the work of cutting 3 layers of video instead. SOUL refused to make the finished three lasting more than 1 hr sequences so rendered video sequences PP. finals

  I tried to remove the plists for SOUL, PP and QT repair disk permissions and restarted, but there was no improvement.

  Customer is satisfied for now, but will want to return on this work to a later date so decided to uninstall and reinstall SOUL and PP in the hope that the two would be willing to work properly when needed again. SOUL works very well in conjunction with another PP project, but now I can't open the PP project in question without the above error message appears.

  After searching on the net, it seems that the problem may be caused by ProRes but I could not find a definitive solution to the problem. Does anyone know either:

  1. How do I solve this problem?

  2. If I chose the "modified by using a custom sequence parameter", can I be sure that my footage will look the same, even if they do not use ProRes? The final format of the deliverable will be mp4 so as long as the overall appearance does not change so I can afford a change in the edit codec. It's just that with three sequences of more than an hour long, I don't want working days to be ruined.

  Other older PP projects of mine open and work properly.

  First CC 8.2.0 Pro

  Media encode CC 8.2.0.54

  10.10.2 OSX

  Any help would be greatly appreciated.

  Duncan.

  Web chat Adobe find a solution.

  Open the PP. project

  Export your project or the sequence in Final Cut Pro XML form.

  Set up a new project PP.

  Import Final Cut Pro XML file.

  This will take you to the top race.

  Since getting back to this publishing project, I found that some things will be lost or change using XML:

  You will lose the position key framing, black video clips, dissolve fx, audio levels, dynamic audio fx, the possibility to open a multi camera clip and change the display of the camera.

  You keep the cut points, crop fx.

  Not perfect but only took a few hours to save 3 working days.