Required: Original EA3500 Firmware

Similar Questions

• Where to find an original driver/firmware for duosense screen (HP Tx2?)

  Well, I'm having a problem.

  Just got my tx2, and given that the computer was delivered inflated my taste with the trial software (and I really wanted to try real multi-touch capacity) I deleted the hard drive and installed the beta version of windows 7 32-bit.

  I installed the drivers for duosense ntrig (which also included a new firmware, unknown to me at the time and enjoyed improved support of touchpad compared to the firmware/drivers group, but I also lost pen holder.)

  Want to back pen holder, I reinstalled my own copy of vista, but much to my dismay, the screen no longer works properly, because of the new firmware.

  The button is very bouncy (it's very inaccurate, and if I highlight something and hold the button, the parameters of what I chose shake them.)  In addition, the pen still does not, because of the firmware.

  Anyone know where I can get a copy of the original firmware for the duosense screen?  My laptop is now paralyzed until I can find the original firmware, or a newer driver comes out for windows 7 that supports stylus.

  Thanks in advance.

  Message edited by heyman421 02/03/2009 07:55

  OK, here you go.

  1. reinstall or log in to windows 7 (I had it ona separate hard drive)

  2 install the software with firmware NTrig package

  3 here is the kicker! You must go and install this: http://www.microsoft.com/downloads/details.aspx?FamilyID=32bc1bee-a3f9-4c13-9c99-220b62a191ee&DisplayLang=en

  This is why it would not uninstall before.

  4. once who installed go for program files, ntrig, driver and click on NtrigFwRb.exe and run as an administrator. I don't know if it does nothing, but well, here are the steps that I follow! Laughing out loud

  5. run DPInst in the same folder and it say uninstall. It should tell you its remove the firmware.

  6. go into Device Manager and remove all the HID drivers.

  7. check hardware and sound and hardware options Ntrig should have disappeared.

  8 to make a full system recovery in windows vista.

  TADA! You have your back multitouch. HP told me they wanted me to pay to put in the firmware that was not allowed. Forget it.

• Sansa Fuze v1: Rockbox vs original Firmware

  ROckbok have the stable version for sansa fuze v1. But I wonder what is the best? ROckbok firmware or the Original sandisk firmware... Any idea? Thans a lot...
  SRY for my bad English!

  Hello

  I can't tell you which is better for performance, but if you install rockbox on Sansa Fuze you will lose the warranty on the product and SanDisk will provide you with no warranty or replacement if it brakes or problems arise.

• USRP RuntimeError: Please update the firmware and FPGA images for your device.

  Hello

  I have an Ettus USRP N210 with a surfboard RF WBX running FPGA firmware version 4.

  2009 LabVIEW and NOR-USRP 1.1

  When I try to run one of the USRP VI OR as devices to find it displays the following error code:-1074118627

  "niUSRP Devices.vi finda length or configuration error has occurred."
  Code: 1440
  Details: RuntimeError:
  Please update the firmware and FPGA images for your device.
  See application for USRP2/N-Series notes for instructions.
  Compatibility of the Protocol expected number [7-11], but received 12:
  The version of the firmware is not compatible with the host code generation. »

  I can communicate with unity on Linux using UHD machine and the utility Configuration NI USRP can see the device, but firmware update is not possible, probably because of my IP ending in 221. Latest firmware Ettus was recharged via Linux UHD.

  Looks like my firmware again? I am not allowed to download the old versions of the FPGA firmware.

  Can someone help me with this problem please?

  With respect,

  -Sigurd has.

  Hello Sigurd,

  The NOR-USRP driver requires a specific firmware and FPGA image to be downloaded to the USRP to exploit.

  You can use the utility of Configuration USRP download appropriate firmware and FPGA image to the usrp.

  This knowledge base article will help you: how update the Firmware and FPGAS Images for N2xx and NI 292 x USRP

• OverDrive Media Console - firmware update Fuze and can no longer download audio books

  
  

  My experience is that you can not set the clock manually.  While in line, plug the "rocket" and something of its meaning (any file random non - DRM) transfer using the * Windows Media Player *.  This seems to set the internal clock (but you must be * online * while do you - it updates the clock of the internet).

  I noticed the "rocket" is particularly sensitive to obtaining of the clock of discount for a reason any (for some reason my Clip has not been nearly as often, the clock reset the "rocket" has).  I have no "always - on" internet and I noticed pretty much everytime I open WMP with attached rocket & no internet connection, it resets the clock of the rocket, causing Overdrive "unit clock not set" message.  This is a big concern for me to get the clock reset (to find an internet connection).  What I think is happening: when you open WMP it seems looking for all connected devices, and set their internal clock at the time of the internet - and you're out of luck if you don't currently have an active internet connection (I think this is a bug in WMP, but I have not confirmed).  To make sure that I do not open with any attached Sansas WMP.  Never.  (Or more).  And the internal clock to my Fuze slept together for going on 6 months now. (It was previously reset every week or two.)

  My second thought (actually, probably the original problem) - firmware update resets a bunch of stuff to the default values.  The rocket USB mode was probably return the default (Auto-detect, not-so-affectionately nicknamed 'auto-defaut').  Go to settings | USB mode and set it back to the PSG so OverDrive can use it and then try again.

  Good luck.

• Looking for a Firmware bin file?

  I was installing rockbox, and asked that the original file, firmware or something, like a bin file? Where can I find it?

  As I said, it's a different material. The downgrade would only take the courage of your v2 and replace them with the innards of a v1.

  I don't know Rockbox is working on it among their many other projects - which they are out of the goodness of their heart, geek, with little or no help from SanDisk, so you'll need to be patient.

  You can see how they're going to www.rockbox.org.

• 4.3.6 7.0.1 downgrade firmware for a PS6010

  So I know this is probably VERY discouraged, but we try to consolidate this PS6010 with some older units as a PS4000, that all run along happily in 4.3.6.  I feel that you cannot add an Equallogic to an existing group, unless it corresponds to the revision of the firmware from the rest of the members of the group.

  Is this possible via any means? (I already know that it is not possible through the user interface)  I am sure my brick system if I try to force-load for example images on microSD cards?  OK, I already tried this but received a message like "The NVSRAM present in the system is newer than the version found on the controller" Version 16 was on the system (somewhere) and version 11 on the controller that I provided an image.  My next thought was to clear the room and the NVSRAM batteries in hopes of controllers that they will forget that they already had a newer version, but it seems not the best idea.

  Someone at - it experience with this sort of thing?  It is obviously not something that will be most of the people tried, but well, there are a lot of smart people on this forum.

  Thank you!

  Hello

  Downgrade, do not correct an option.  There is also concern with FW level according to the hard drives in the 6010.  Some readers require the latest firmware on the table.

  Don

• The EqualLogic PS6100 firmware update

  Hello

  We have EqualLogic 6100 with SAS drives and want to update the firmware of 5.2.2 to version 6.0.5. It is a simple process?

  Thank you

  Yes, you can go directly from 5.2.2 6.0.5.  It is in the document "Update Firmware for Dell EqualLogic" on the firmware download page.

  You should also take a look at the "SCSI initiator and operating system Considerations", to make sure that your settings of server (s) always match the requirements for this firmware.

  -joe

• Photosmart B110a Wifi Macbook Pro Scan fails after the most recent firmware update: CHL1FN1146AR

  Hi all

  I currently have a problem when scanning on wifi using a Macbook pro (Mac OS X 10.7.3).)

  Printer/scanner/copier is a: HP Photosmart B110a model: CN245B

  Service ID is: 20348

  The driver version is: HP ink Jet 8 pilot 3.5.2

  I used to scan directly into Evernote after completing the following steps:

  System Preferences - print & Scan - Scan - Scanner-open

  At this point the printer stops responding (just the apple turning and turning circle)

  The utility shows HP status: 'Idle '. The serialnumber Sevice ID and model are shown as well.

  Reset the system of printing and reinstalling the driver unfortunately did not solve the problem.

  Even the HP utility informs me that "an error has occurred."

  I tried to press the button 'wifi' on the printer for several seconds to make my router was able to connect to the printer.

  It seemed to work. I can print to the printer, once... grmmph... After successful printing I launched a scan...

  Too bad...

  The message:

  "The scanner reported an error.

  The scan did not complete because the operation was canceled while the analysis was underway. »

  pop up.

  Power - off at least 60 seconds does not resolve the issue.

  This behavior has started to happen right around the time that I installed an update of the firmware on the device.

  The current Firmware version is: CHL1FN1146AR

  I can reach the printer using a Web browser, the printer is showing the status of 'connection '.

  The webscan works like a charm and the self test page print works as well.

  If the printer is in my humble OPINION.

  Please let me know if this sounds familiar to anyone. Maybe a restore to the previous firmware could solve my problem?

  Best regards

  Martijn Krop.

  PS: My router is a

  TP-Link WR1043ND Original newest Firmware. The protocol used is WPA - PSK (automatic encryption)

  Hi Martin,

  First of all, try to reboot the router?

  I always suspect the router.

  Even further because it seems not to support Hello based on the above document, the manual of the router and the router configuration that I went through with no opportunity to locate any indication for its support.

  Please try temporary without going through the router and check the differences:

  1. On the product control panel, tap the Setup icon ( ).

• Which option of DELL PERC 6 / i firmware should I download?

  We simply have to upgrade one of our hosts ESX 3.5 U5 vSphere 4.0 (running on a DELL PowerEdge 2950 server).  Then we install OpenManage 6.1 on it.

  OpenManage, we see the PERC 6 / I have firmware must be updated - 6.1.1 - 0047 current version firmware is older than the 6.2.0 - 0012 version firmware required for a model 0x1F0C controller: controller 0 (PERC 6 / i integrated)

  At DELL, we find that there are a number of download options.

  (1) we would like to know which one should we use - DELL_PERC-6-I - INTEGRATED_A11_R216024.exe or RAID_FRMW_LX_R216024. BIN

  (2) require a floppy drive as we do not have on this server?

  (3) is there any requirement to install firmware - as: enter the Maintenance Mode... etc.

  Thank you

  You need the RAID_FRMW_LX_R216024. BIN file, just run in the service console, no need floppy. It is certainly a good idea to put the host in maintenance mode and to reboot the host after you apply the firmware.

• Scan PSC 2210 "warm-up."

  Hello.

  Product: PSC 2210 all-in-one

  Operating system: Windows 7 32 bit

  Error: Message "Warm up" when start scan

  Any changes to the installation program or system.

  It was not the first analysis of the day.

  When to start to do this scan, it just hooked up with this message.

  Looking around, I found an update of the firmware (HpAiOFWUpdate2_2.exe), which was supposed to solve the problem of "heat".

  It running, I get the message: "a connected and powered Hewlett-Packard all-in-one that could benefit from this update of the firmware has not detected."

  Since on Win7 drivers from WindowsUpdate, the original all-in-one software was not used, and it is one of the requirements for the firmware update utility.

  I don't have the original CD, and it is older than Win7, then, it would be probably useless anyway.

  Looking at, I found the installation wizard (hppiw.exe).

  He confirmed that the drivers were installed and asked to test the scanner. He failed.

  He also mentioned another tool, the "HP print and Scan Doctor" (HPPSdr.exe).

  It was able to detect the problem. He told me to unplug the power cord from the all-in-one device, plug it back, turn on and restart the computer.

  After the reboot, the doctor was there waiting for me to continue. He took the test again, and yet once it failed.

  End of the story.

  So, how can I update the firmware?

  Is there another way?

  Is there another solution?

  Thank you in advance.

  Rui Ferreira

  Hi again.

  Thank you for your response.

  Although connect it directly to the wall socket set to solve the problem, I don't have a party immediately, mainly because it would mean that I had a bad electrical problem.

  But the next day, the message "Warm up" come again once, even with the machine directly connected to the wall outlet.

  During this time, I tried to find other ways to work around this problem and found one that works.

  It goes like this:

  Before using the scanner through the computer, I do a direct copy of the scanner to the printer without using the computer. He's never complained and made the copy without need to warm up. After that, he does all the scans, I need because it's already hot.

  I now have to "Accept as Solution" while others may try my workaround.

  Kind regards

  Rui Ferreira

• Moving from V1 to V2 CPU Service profile

  Hi all!

  I'm looking to introduce some B200 - M3 CPU in our field V2 servers. Would it not possible to move a service profile linked to a server with a processor of V1 to a UC V2? Or profiles will move only to love for configurations?

  Thanks in advance,

  Ryan

  Hi Ryan,

  One thing to note with processors of v2 is that they require a minimum firmware to work properly with UCSM.  If you do not meet this minimum need you view question where the UCSM is not able to identify the processor type and you will see errors FRU.   I think that all of the processors v2 require a minimum firmware 2.1 (3), you can check on the release below notes table 4

  Release notes 2.1 (table 4)

  http://www.Cisco.com/c/en/us/TD/docs/unified_computing/UCS/release/notes...

  Now regarding your original question, YES it is possible to use the service of a V1 CPU profile in a V2 CPU blade.  The only thing you want to make sure is that you don't have a 'host firmware package' that degrades the firmware of the blade to an unsupported version of service profile.  If you donwgrade the firmware of a cpu v2 as the server blade will not discover until you upgrade the firmware to a supported version.

  Please let me know if it helps.

• You can use my Mac with iOS

  You can use my Mac with iOS

  Hello ifixer2,

  Thank you for using communities of Apple Support.

  No, you need two or more Mac computers that meet the following requirements to use Back to My Mac:

  What you'll need

  To configure and use Back to My Mac, you need these things:

  • Two or more Mac computers that use the same account iCloud on OS X Lion v10.7.5 or later version.
  • A Terminal supported access AirPort (AirPort Extreme, AirPort Express or AirPort Time Capsule) or other Internet router that supports UPnP or NAT - PMP protocol, with the latest firmware available. AirPort base stations require version of firmware 7.6.1 or later for Back to My Mac.
  • Utility airPort 6.3 or later.
  • For screen sharing, a 300 Kbits/s-or-more rapid, bidirectional (high-low) Internet connection between computers. You may be able to use with slower connections to share files. If file sharing doesn't work as you think, check your settings and connections.
  • A firewall that allows remote connections. Some firewalls may prevent some back to my Mac connections. For example, when you're at home, don't maybe not able to connect you to your Mac at work. But when you're at work, you might be able to connect to your Mac at home. If you are not sure if the firewall will allow the back to my Mac connections, check with the network administrator for your organization.

  If you want to use an AirPort Extreme or airport Time Capsule to access files on a hard drive external, you need a Mac OS extended (journaled) formatted USB hard drive. When you use with Back to My Mac, your hard drive is displayed as the base under shared in the sidebar station Finder.

  Set up and use Back to My Mac

  Take care.

• USB drive not recognized on the A30-151 in XP

  After a clean install of Windows XP Pro on a Satellite A30 151, a USB device remains in the category 'Other' (after installation of the graphics and audio drivers, modem) for which no driver seems to be available on the drivers CD. At this point, the category "USB" contains four entries, two standard "Universal Host Controllers" and two "OpenHost' controllers, with the default drivers.
  I suspect that the missing device can be a USB 2.0 "PCI controller host improved USB" from another manufacturer, but Toshiba does not offer a driver for XP for it then it should be supported by the OS (?).
  Any suggestions as to what can be and what drivers need?

  It turns out that XP does support USB 2.0 according to the SP1, it seems a pre - SP1 version of XP Pro leads the native Windows drivers is not available. For anyone in a similar situation, it seems as if a) upgrade to SP1 or b) install the hotfix Q312370)

  http://www.google.com/search?hl=en&q=Q312370_WXP_SP1_x86_ENU.exe

  for the English version should throw a lot of download sites) followed by the autodetection of the native Windows drivers should do the trick. However, the following SP1 problem may come into play

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?service=EU&FID=TRO0000001c0d

  in this case, the "NEC PCI to USB Enhanced Host Controller B1" driver required original can be found by searching for "USB driver" for "Windows 2000" for the Satellite A30 Toshiba driver download page.

• Toshiba 40BV801B LCD TNT HD

  I recently bought a Toshiba 40BV801B LCD TNT HD which works fine but will not show anything other than a black screen on the channels of DTT HD 101, 102, 103, etc. (BBC and ITV).

  Is this likely to be a problem with my particular model or a requirement for an update of the firmware or something else?

  If this is could a requirement of the firmware someone please post the link of the relevant firmware download.

  Hello

  To download the firmware, you can check this product TV Toshiba firmware download page:
  http://www.DL.Toshiba.com/dly/index.jsp?region=GB&lang=en

  But to be honest, I think you should check the TNT page for details on the problems of possible channels.

  This is a page for TNT:
  http://www.Freeview.co.UK/help/service-updates