Requirement of password "you have to change your unlock iPhone code access in 52 minutes.»

My father is very upset and frustrated, and so I am. I hope that we can be compensated in some way (but probably not).

My father unlocked his iPhone 5 as usual, then he got a notification on the home screen that says "password requirement you need to change your unlock iPhone code access in 52 minutes.»  We have never seen this before notifcation, and my sister and I have an iPhone more than 6/6.  I told my father to simply ignore it, but then he kept appearing whenever he has unlocked his cell phone, so I told her to choose continue.

He chose to continue, changed the password from one to 4 digits long, and then he picked up his phone.

Restarts, the phone prompts you to put in an access code to the first newspaper in attempt before it allows you to use the contact IDS.  It introduced the new password, but it didn't work.  He tried several times, and now it shows there are 60 minute wait.  At this point, it just goes to continue to put in the access code until it restores his phone.

Why did this happen first? It has a 5 under AT & T's iPhone with the latest version of iOS.

The new password longer trying to capture is correct, because when you create the password, it asks you to enter twice, and he could not continue if he does not get it right twice.  So why the code was not working?

Hello gabemstr,

Thank you for using communities of Apple Support.

I see in your message that your dad's iPhone shows an error saying: requirement of password you need to change your unlock code.  It seems that your father has a managed iPhone, with a profile that is installed on it.  When a device is managed, it can have certain requirements for password as an age of access code.  I suggest your dad gets in touch with his staff, or deletes the profile.

By default, the authentication of the user code can be defined as a six digit on taking devices PIN supported Touch ID or a PIN digit on all other devices. In iOS, you can choose from a comprehensive set of password policy to meet needs of your security. These access policies may include requirements for:

  • An access code on an iOS device

  • An alphanumeric value

  • Minimum length of password

  • Minimum number of complex characters

  • Maximum password age

Password policies

  1. Delete the configuration profile provided with the application.
    • Go to settings > general > profile, tap on the configuration of the application profile.
    • Then click on delete the profile. If requested, enter your device password, and then press DELETE.
  2. Restart your iPhone, iPad or iPod touch.

How to remove an application that has a configuration on your iPhone, iPad or iPod touch profile

Take care.

Tags: iPhone

Similar Questions

  • BlackBerry smartphones ' you have used all your available device pin changes for your My World account.

    I recently replaced my BB Tour Sprint with Sprint, and when you try to reinstall my apps world bought for BB looks like this: "you have used all your available device pin changes for your My World account.» I'm getting this error when I try to use my BB Tour with the NEW PIN {led by privacy}, the email account used is {under the direction of privacy} a way to solve this issue? I had a few exchanges with Sprint, because Tour trackball problems. I enjoy using App World, however I can't buy something again or recover my previous purchases with this error. My previous PIN is 30BE5BD9 (I got to the list because the BB tech support link listed my new PIN invalid - as well as my old pin code). Please notify.

    PS: Crackberry App World made a PIN exchange a simple question - simply plug your new PIN and you can easily recover your purchased applications. RIM's App World support really dropped the ball on this one - there are a lot of tricks of BB exchanged and this App World problem really needs to be rectified. There were already several messages on this forum about it, and the owners are not able to submit their complaint to the BB technical support because the link would not accept their new PIN! Shame on you RIM.

    Hello!

    There is actually a fix for all your questions, but the first that needs to be fixed is the answer to bad PIN code on the RIM support site. However, this hotfix cannot be displayed publicly. Therefore, please check your private Messages on this site for a PM from me with these instructions.

    BTW - if you think also that your message has been changed by the mods to delete any personal information (pines, e-mail addresses, etc.). .. as a public forum, it is generally not a good idea to post them here. In addition, these forums are a user to channel... support not a portal user-to-RIM...

    See you soon!

  • Why did you have to change the layout of Firefox?

    I would like to know why you've gone and changed the provision in the Firefox?

    I'm still on Fx 3.6.18 because frankly 5.0.1 is horrible.

    Why did you have to change everything and make a difference. Why couldn't you have given us the same layout as 3.6.18 but with these new updates.

    I will never download Fx5. 3.6 was perfect.

    Also how can I contact Fx without upgrading?

    Firefox 3.6.19 is available here.

    http://www.Mozilla.com/en-us/Firefox/all-older.html

    grumpyolman - got a message by MP, saying do not post if he has nothing constructive to post

    Regard to the caveat, you can't choose who can post in threads that you start. James offered a suggestion to customize the toolbars by linking this technical support article. Almost everyone who helps users here is volunteer, especially now in the wee hours of Sunday morning (USA), so please treat us a little more sympathetic. Separate your anger by changes in Firefox, people who are here to help. Most of us don't like the changes either, but we change what we dislike interface customization.

    Please see this - https://support.mozilla.com/en-US/kb/Forum+and+chat+rules+and+guidelines

  • Can you have vCenter and your database server on different VLAN?

    According to the title, can you have vCenter and your database server on different VLANS or must they reside on the same?

    Also if we want to change the current IP Address/Subnet Mask vCenter, are there factors that we take into account?

    Thanks in advance for any help

    Yes they can, so you must only be sure to have enough bandwidth network and speed between them will not affect the performance of VC.

    To change the IP of vCenter, keep an eye on this: http://kb.vmware.com/kb/1001493

  • 10.10.5 running.  Is there a way to check if my system has a virus?  I was surfing and a message 'the last page you have open infected your system with a virus.  ' Click on continue fixing your system.

    I am running 10.10.5 OS on a Macbook.  While surfing, I got a message "last page you have open infected your computer with a virus.  Click here to clean the virus. "It appeared to come from Apple but aware that this message could be the virus.  Is there a way to check my system for a virus, or what I do check at an Apple reseller or a store?

    The message is a scam.  There is no virus for osx.

  • My password - I have now changed 2 X and updated my account information - is rejected.  No reason.  But I can't install the new Flash application.

    My password - I have now changed 2 X and updated my account information - is rejected.  No reason.  But I can't install the new Flash application.

    https://forums.Adobe.com/thread/1619850

  • Can you have multiple packages in a source code file, or you have several files?

    Can you have multiple packages in a source code file, or you have several files?

    ExampleClass must be saved in a directory as well as your main fla.

    This directory must have a subdirectory named samples containing SampleCode.

  • You have Adobe Acrobat pro for iPhone / iPad?

    You have Adobe Acrobat pro for iPhone / iPad? t

    Hey Joe,

    We do not have Adobe Acrobat Pro, but it takes Adobe Acrobat Reader app for iPhone/iPad: Adobe Acrobat Reader on the App Store

    Kind regards
    Rahul Tyagi

  • Password requirement: you need to change your iPhone unlock access code within 60 minutes.

    Question:

    A couple of weeks, after unlocking my iPhone, I received a strange guest on my iPhone 5 (running iOS 9.3.1 not jailbroken) saying that I had to change my password within 60 minutes.

    Do not think much of it, I followed the instructions and changed the password via the guest. I didn't question the fact that it gives me options other than to choose a 4-digit password.

    After changing, I was again 2 weeks later (2 days ago from the drafting of the present) invited to change my password, except that this time I had 58 minutes to do this.

    I found this to be a bit sketchy so I did some research and there was no documentation of apple in this regard, only the forums a lot of other iPhone users who have experienced the same thing and forums have been dated as soon as 2012 (that I've seen in any case, could have been more before too).

    I rang apple support, and they were not aware of this problem because it was not a feature for iOS which made this place and recommended I reset my settings immediately (by going to settings > general > reset > reset all settings). This resets all settings, does not erase your data.

    It was my personal guess that if it was actually a malware, it can be connected to the operating system in some ways because the first time, I changed my password via the command prompt and it worked. So I made the decision to back up everything I wanted to keep manually and not through iTunes, then manually to get any return. This may have been unnecessary, but it is still I think that all these recent iTunes backups I had had this problem.

    If it was in fact malicious, I don't know what kind of access he could have had on my phone, either data or another. I may be a bit paranoid, but wanted to stay on the safe side as pretty much everything, I was put in place and connected to my phone. I went the full length and changed a lot of the settings for the accounts I have. Yet once, probably wasn't necessary, but safely.

    So if you feel yourself, just know that it is not created by apple and you at least have to reset your settings.

    I hope that it doesn't matter what lightens!

    PS Ce isn't a screenshot I took, this is one I found on another thread stackexchange (source: http://apple.stackexchange.com/questions/124771/is-the-message-you-must-change-y our-passcode-within-60-minutes-valid-non...). Although he is exactly got me

    Please, it is an old problem that you have learned you looked in the forums before proceeding with such a long and useless post. I'm sure you mean well, but one of the elements discussed in the communities of Apple - terms of use support is first search the forums about your problem before posting. Scams such as these were widespread and often identified - too often.

  • VI Analyzer "a few screws and/or essays have been added or removed from your file system because you have saved changed this configuration file."

    When I run VI analyzer and open our standard configuration file, the message "some screws and/or essays have been added or removed from your file since changed record system this file of configuration." appears. By clicking OK, choose something to analyze and move to the VI Analyzer - select the Tests, the selection of testing control dialog box is completely empty and the Analyze button is grayed out.

    I'm runing LabVIEW 2013 on Windows 7, VI Analyzer worked before and I tried repairing and uninstalling the LabVIEW program (then reinstalling) already. If I do not select a config file or try to reset all the test configurations, control of the Tests remains empty.

    Is it possible to restore the tests or difficulty just the VI Analyzer toolkit?

    The only thing I remember to change since I ran last parser is that I installed the tiara.

    Most likely someone accidentally moved the test record THROUGH by accident

    VIA installs like a Toolbox and would not repair with just a LabVIEW installation

    You could re - install Media Developer Suite if you have that in the opposite case:

    Or the other

    Change > getting started window or

    Tools > find a LabVIEW Addons

    will launch the search VIPM tool

    Search for VI Analyzer

    Download and install

  • Appworld blackBerry Smartphones saying: Enter password you have a device activated password.

    When I check in on Appworld with my playbook connected to the PC I get the following message:

    Enter the device password
    [Pin: *********]
    You have a device activated password. Enter your BlackBerry device password to continue.

    My device is not activated, I made sure of this password.

    When I enter a password that it could have been I get this:

    Unable to connect your device
    You have not entered the right password BlackBerry device. Try to enter your password on your device. You cannot access BlackBerry App World on your computer until you correctly entered your device password.

    I tried to put a password on the device and try to connect this way, but nothing helps,

    What's not?

    PC is Windows 7

    PlayBook is up-to-date

    Curve phone connects without problems

    Browsers: Opera and Chrome

    Don't know not when this started, no was not to occur the first day I got it, I got it in dev mode, but this password does not work, not in dev mode. now and NO password is defined for the device.

    Thanks for any help.

    OK, solved!

    It is not possible to download applications on the computer for the playbook, it's the browser/system telling you that it cannot be done!

    They are working on it and it will be in the future!

    Everything is good!

    Thanks for your help and suggestions Wolf359.

    And I'm sorry to be the bearer of bad news for others!

    All night.

  • How to tell you how many images you have left on your subscription package?

    I have Adobe Stock with my plan of photography and my new month started, but I am always required for my images. I'm supposed to get 10 pictures per month included in my package. What can I do?

    Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
    Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME
    Don't forget to stay signed with your Adobe ID before accessing the link below

    Creative cloud support (all creative cloud customer service problems)
    http://helpx.Adobe.com/x-productkb/global/service-CCM.html

  • Is it possible to make a required field if you have selected a "sales stage"?

    Hi all.

    We use certain stages of the sale to our opportunities.

    The higher ups would make it necessary to choose a "lost reason" when the "sales stage", "" closed / "lost" is selected.

    These fields are drop-down lists currently used by everyone. "Sales stage" is currently required.

    We cannot pull of this layout dynamic because it is an area that is not "Opportunity Type" led.

    Thanks in advance!

    Yes it is possible. In the details of the sales process where you have defined at the stage of the sale. Down on the stage of sale closed/lost. In this section, you will see a section called "of the required additional fields.
    You can specify the fields you want to make required for this stage sales

  • Windows calls home to tell you that you have problems with your computer

    I get phone calls from windows

    I get phone calls from windows

    It's a scam. How does Microsoft know that you have a problem? Hang up on them the next time they call. Bruce Hagen
    MS - MVP October 1, 2004 ~ September 30, 2010
    Imperial Beach, CA

  • You can always change your website once your Adobe Muse subscription ends?

    Only, I want to subscribe to Adobe Muse for 1 or 2 months, but what happens if I want to change my site after that? I have to re-register?

    Thanks in advance!

    Hello

    You will not be able to access Muse after the expiry of the subscription.

    However, you can recover the site in the form of HTML pages and edit using a HTML editor and load it back.

    It will be useful,

    Sonam

Maybe you are looking for

  • Burn the disc hangs at about 60%

    Hello Over time disk burn on a DVD hangs at about 68%. Could conclude that my physical drive is inoperable or is this a FCPX problem? Using FCPX on El Capitan on an iMac 2011 16 Gb Thank you

  • Strange intermittent problem with macbook pro

    Hey there ppl. So, I have a Macbook Pro (15-inch, mid-2014, retina), processor i7 2.2 GHz, 16 GB of memory. Running OS X El Capitan. My problem is a strange, because it is only intermittently. ID say like 10-15% of the time. But its very frustrating

  • programmatically set the display format minimum field width

    Hi all I am designing a user interface for a digital ASIC assessment and I wanted to programmatically set the minimum field width of a digital control that takes a binary value. Is it possible to do? Thank you Nick

  • Computer is turned off, online the page in the window is too small. Can not get it back.

    I turned computer, went online and home page is so small, I can barely read. The window itself covers my screen, but the page is in the middle of the screen of the window, 10 sizes too small. I visited all the Web sites were similarly. This page also

  • A user on 2 or more areas

    Hello I experimented with emails on an old box of Server 2003 and have hit a problem that I can not find the answer.  On the server I want to host several domains e-mail (easy - fact), but also potentially need to be able to have the same username on