Reremplie cartridge rejected by ENVY 4500

Similar Questions

• HP ENVY 4500 e-all-in-one: cartridges and country

  History:

  My father-in-law is living in Belgium, near the border.  He went to Holland for shopping sow, a promotion for a HP Envy printer and purchased.  Simple.  Then when I was visiting him, he asked me to install the printer.  I tried and it sucked!

  Following the installation guide (a double-sided with only the images page), I removed the protection, under voltage, chose my country (Belgium), discovered the heads of cartridges and insert cartridges.  But the printer screen showed a message explaining that the cartridges were not intended for this printer.  They came out of the box the printer!

  So time to seek the support of troubleshooting.  And I found this page http://support.hp.com/us-en/document/c02558798 explaining all the evils that you get if you cross a border with a HP product!

  Assuming that the problem is related to this wonderful device...

  WHY should I select a country?

  WHY is there no clear warning on the box as 'to be used only for the Netherlands?

  If the problem has some other cause...

  WHERE can I find real support of troubleshooting?

  Conclusion:

  What is the lesson?

  So far: do not buy the product HP more

  While HP regionalize some inkjet products, the Belgium and the Netherlands are in the same region and use the same cartridges HP 301 in the Envy 4500 printer.

  The question that you see is unrelated to the regionalization.  It is possible, that there is one grain of paper dust or other debris on the electrical contacts.  I would suggest the steps of troubleshooting in the paper here.  If this does not resolve the issue please contact HP.

  From a post of Sunshyn2005, contact technical support HP see the following link to create yourself a file number, then call and it can help to expedite the appeal process:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
   
  File number and phone number are displayed.  Call the phone number provided and forestry of the number of the folder that you created.

• HP Envy 4500: URGENT - HP Envy 4500 does not print with only a black cartridge

  Hello

  My HP Envy 4500 will not be black and white print with just the black cartridge. I want to use the color cartridge, which is almost empty. Result: my pages get printed in a greenish color. I can't select the option "only use black cartridge" in the print option either (it is disabled). I tried to delete the printer and re - install again but it doesn't change anything. I use a Mac with os x 10.6.

  I need to print important documents quickly, so any quick help is more than welcome!

  Thank you

  Gunther

  Use single-cartridge use the HP ENVY 4500 series with only one cartridge.

  Mode single-cartridge begins when an ink cartridge is removed from the distribution of ink cartridges.

• HP ENVY 4500: Windows "without toner /ink' 10 issues

  Hello

  Used to use my desire with my old PC to Windows Vista 4500. No problem at all. Did you buy a new laptop this Saturday and my desire with the same ink cartridge does not print at all (unless I mail to my printer or use Web services set up the tool and test a testpage using this thing).

  But when I want to print... starting from the webbrowser, from word, the message comes the printer runs out of ink or toner and it refuses to print. I use this printer only modus black. So no color cartridge is present.

  Tried to solve this problem but everything I try, what no toner or ink message guard showing no gains 10 for this printer. Someone knows a solution? THX!

  Hi @LenK8940,

  Thank you for joining the HP Forums!

  I noticed that you can not print with your HP Envy 4500 on Windows 10. And I'm happy to help you!

  There could be a conflict of driver on the computer. This printer with a single-cartridge mode that allows you to print black without color cartridge. I recommend you try our printing HP and Scan Doctor, let me know the results!

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope that solves your problem!

• 4500 envy: Envy 4500 will not work after ink change

  I changed the ink cartridge in my HP Envy 4500.  It prints the alignment fine page.  I put on the screen to scan and it repeat me that it is «forever» scanning until I have Cancel.  Then, it is stuck on cancel until I have force a stop down.    I'm ready to take a hammer to this printer.

  Hi @Paulaayn,

  Please go on the HP Forums! I'd be happy to let you save your craving for 4500 sledge-hammering.

  I understand your printer is stuck in a mode of scanning and based on your description, it seems that it is the alignment page that didn't scan. You have the printer connected directly to a wall outlet or is this a surge protector or power bar? Even if you have used a surge protector/power bar this whole time and you feel that this is not the case, please connect to a wall outlet so that we can eliminate the source of energy as the primary cause.   Questions when it is connected to an uninterruptible power supply/Strip/surge protector power

  In this document, you will see, QUESTION: questions or problems may arise when a HP LaserJet printer is connected to a UPS (UPS), a power strip or a surge protector

  ↑ This is not limited to the Laserjet printers.

  I ask because I wonder if the printer does not have enough power to run the task. If you do not have the printer connected directly to a wall jack already, we will perform a hard reset. To do this, leave the printer and unplug the power cable for 1 minute. While it is unplugged, press and hold the power button on the printer for 10-15 seconds to release built his power, then after the minute, plug the printer in.

  Please let me know the results of your efforts, and I'll get back to you. Thank you.

• HP Envy 4500-cannot print in COLOR and do not give me an option. ONLY black and white shows option

  My test page for the HP Envy 4500 comes out beautifully with vibrant colors and without streaks.

  I can also print other devices with color.

  Not connected directly to my computer, I have no options to print in color.  Photos, web pages, PDF files all print in B & W.

  The other forum posts which give instructions to get out the cartridges do not solve the problem.

  I am printing from an OSX and I have genuine HP cartridges.

  If I unplug the USB printer and try to print wireless, it still doesn't print in color well can we of our two phones (ios and android).

  Help, please.

  I uninstalled everything and him reinstalled the HP Envy 4500 driver out of the site.  Now, it will be printed in color of all programs.

  Hope this helps someone

• HP Envy 4500: HP Envy 4500 will not work

  I get this message:

  Jam of transport

  The printer cartridges can not move.

  Open the cartridge access door, cleare any jammed paper or obstructions.

  Make sure that the ink cartridge levers are lowered & engaged,.

  The cartridges are stuck on the left side.  I brought the printer Staples where I bought it and nobody could find no obstruction.   He went from 90 days, but it's less than a year for the guarantee.

  HP does not seem to have an email address or phone number to call for this situation.   Just need to know if my desire to 4500 can be fixed for free under the guarantee.    It is the only place to contact.   I called the three digits as points of service and all three are not points of service.

  What should I do next?    Who should I contact?

  Thank you very much

  Terry Maloney

  Hello @Terry50,

  Welcome to the Forums of HP Support!

  I understand that you get a 'Transport Jam' error on the front panel of your HP ENVY 4500 e-all-in-one printer and troubleshooting with the - have made this material error with the store nothing helps. Right now, I want to point you in the right path of resolution.

  To begin, please can I you click here to review the troubleshooting steps to resolve this specific error condition. Please just review of Solution, and two and three solutionstatements. This includes all sub-steps under the listed Solutions. If all the steps have been made without success, the next step would be to replace the printer as the trolley is a non-replaceable element.

  If you need a replacement, I would recommend that you reach out to the Technical Support queue by phone.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  When you talk with the phone support agent, please let them know to make steps you completed your to try to solve this jam of transport as well as the results of these measures.

  I wish you good luck going forward with this!

• HP Envy 4500 e-all-in-one: 0XB0595DD2 error Code

  Hello

  Can anyone help identify this error code and a possible resolution? I plugged my printer yesterday and the 0XB0595DD2 error message came immediately. I turned the printer on and off a few times, but it happens every time (the printer was not connected to my laptop). My printer is the: HP Envy 4500 e-all-in-one, model no SD-GOB-1301.

  Thank you.

  Reference:

  http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead-issues/do-you-have-an-ink-system-failure-0xC-error-message/TD-p/740567

• HP Envy 4500 All in one printe: copy problems HP Envy 4500

  The printer works well, but I can't do on my envy of 4500 copies.  When I press the 'Start copy black' or 'Start copy color' nothing happens.  I just replaced two cartridges with HP ink cartridges.  The scanner doesn't work well anymore.

  Hello

  Such a most likely occurs as a result of a problem with the scanning hardware.

  Follow these steps to solve this:

  http://support.HP.com/us-en/document/c00587971

  If the product of the repairs are needed to fill this form to contact HP support, be sure to select your region by clicking on the country of change:

  https://support.HP.com/us-en/contact-HP/product/HP-envy-4500-e-all-in-one-printer-series/5304875/model/5304876

  Shlomi

• HP Envy 4500: HP Envy 4500 did not warn me that he was out of ink--just print a blank page.

  My Envy 4500 printer showed black ink low level but still little available.  When I tried to print, just a blank page was produced.  This model tell you not that the ink is out?

  Hey @timmerhyll,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I understand that you have a cartridge in your desire 4500 e - all - in - one printer that is low on ink, but has stopped printing. This printer will display a warning when the cartridge is low on ink, but continues to print if there is an entry ink in the cartridges or not. Most likely, the cartridge is empty, but this document gives an overview of the steps to fix the poor troubleshooting print quality. If this document does not allow the cartridge print cartridge then would need to be replaced.

  Please let me know if this resolves your problems or if you have any other questions. Otherwise, have a wonderful evening!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• HP ENVY 4500 - won't print all the lines

  Hello

  I just bought and installed my new HP ENVY 4500 printer. Facility set to be ok.

  HOWEVER, my first test prints look all the same: only 1 all 3 lines is printed. This sounds like something only black ink lines.

  I cleaned the printhead, I got out and reinstalled the black ink cartridge. But the problem remains.

  No idea how to solve this problem? (not really the best start for a new product HP...)

  THANKS for your help

  Anadri

  Hi Anadri, I suggest you contact the HP Support you may be entitled to a warranty replacement cartridge. Do you know what the warranty ends date was (AAAA/MM/JJ)

  Thank you

  Ciara

• HP Envy 4500: HP Envy 4500 reset admin password

  I just bought a new HP Envy 4500 and impossible to access many functions through the online web interface IP address. It keeps to a secure https version and then pops up to ask for a name and a password.

  I tried using admin / admin and a lot of variation with no luck.

  Any suggestions or help on this?

  Thank you.

  Rainbow7000 nailed you. I'm in place and operate properly. Thank you for your quick response to my question.

  See you soon,.

• EPrinter HP Envy 4500 Scan of the computer (HP Pavilion 14 Chromebook) / E-Mail?

  I just bought three HP Pavilion 14 Chromebook & HP Envy 4500 ePrinters for members of the family that I am trying to set up.  (I'm new to cloud computing).  Can I scan documents to PDF at the computer (Chromebook) / E-mail of the printer?  If so, how?  When documents arrive on the computer?  If the scan to e-mail is possible on the devices above, can I store several addresses e-mail ePrint in the printer choose?  Thank you!

  Hi eKeith,

  Thanks for shouting it and fast response.    No problem on other issues, it is we are here for.

  1. You will need to manually launch the built-in Web server.  What I've done in the past, it's just mark the ip address of the printer is to click instead of having to manually enter the IP every time. It works best if you set a manual ip address of the printer.  I've included a screenshot.
     1. Click on the "Network" tab in the SAP
     2. Click on 'Network' in the left side menu
     3. Click on 'network address (IP)' in the left side menu
     4. Click 'propose a manual IP address.
     5. Click on "Manual DNS server"
     6. For the server DNS preferred manual please enter 8.8.8.8
     7. For the auxiliary DNS Server Manual please enter 8.8.4.4
        
        
  2. There is no way to web analytics by default in pdf format.
  3. The default value corresponds to your "Downloads" folder, but you can switch to "Google Drive".
  4. If you click on the built-in web server Web Services tab, there is an option in the side menu on the left for updates. I've included a screenshot of where to find him.

  

• Want to 4500 all-in-one: Envy 4500 scanner on the internet

  At home, I have a HP Envy 4500 all-in-one printer / scanner. I can the documents sent by e-mail to hpepint and that works very well.

  But I'm at work in another city and you want to scan a document located on the 4500 feel like at home.

  Is it possible to scan a document on the internet?

  My phone app it won't unless it is connected to the same WiFi network as the printer.

  Ric

  Hello

  IAM afraid to said that the analysis can be done on the internet.

  The Mobile/PC device should be on the same network for the scan to occur.

• ENVY 4500: Lack of scanning for HP ENVY 4500 software after reinstalling the laptop

  Dear support,

  I got a HP ENVY 4500, installed on a laptop with Windows 8.1 and the HP Software scanner worked fine.

  I have recently reinstalled the same laptop but with Windows 10 Pro: the printer works fine but the scanner software HP is not available! I can't use all the features of the printer this way...

  My question is: why the HP scanning software is not available for Windows 10 Pro? I used the original CD.

  Where can I download the (new) 10 Pro software for Windows?

  Please help me solve this problem.

  Kind regards

  Carmine

  Hi all

  now, I have solved my problem: I install the Windows 10 soft "HP Scan and capture" from the Microsoft Store and it works very well with HP ENVY 4500 printer / scanner!

  Concerning

  Carmine