Reserved DHCP WRT160NL customers are not appearing in the window of DHCP reservation... Why?

I have 5 computers connected to my router. 4 are wired and I put in place so that each of the 5 has its own static address. One of these computers is my DVR security camera system to allow monitoring my cameras remotely. It worked very well for years, and now I can't access the DVR remotely. I noticed in the router configuration that DHCP clients are not displayed appear as active, even if the two computers are on. I am running XP Pro on these machines and I can PING each other so I know some communication happens. Also, I can access cameras DVR from my main computer using the internal IP address, I assigned to the DVR, but not if I try to use my current WAN IP address.

Would appreciate any advice on the resolution of this problem.

Thank you

It may have something to do with the firmware of the router. I suggest that you should do. The firmware that you can download from the site Web of Linksys is version 1.0.0.3 build 2. (http://support.linksys.com/en-us/support/routers/WRT160NL). After the upgrade, reset the router to factory settings (pressing and holding the reset button). It is best to re - configure the router from scratch also. Try to power cycle your network as well.

Tags: Linksys Routers

Similar Questions

  • Photos marked as favourites on the iPhone are not appearing in the Favorites folder in the pictures on Mac

    I mark my favorite photos directly on the iPhone. When downloaded from Photos on iMac selected Photos "Favorites" on the iPhone are NOT appearing in the Favorites folder.

    Apple forces us to use iCloud to operate? Because that I do not use iCloud and I used!

    IF you do not use iCloud photo library, favorite sides will not be synchronized.

  • Dates are not appearing in the column start and Finsh of MS Project 2010. They become W31/4, W31/5, etc. Instead of 7/31/20113. How can I fix it?

    Dates are not appearing in the column start and Finsh of MS Project 2010. They appear rather like W31/4, W31/5, etc. When it should be like this: 7/31/20113. How can I fix it? Note: Dates listed do appear correctly.

    Hello Charlie,.

    You are welcome. It is what we are trying to do... help people! Thanks for letting me know that the problem is solved. Don't forget to mark it as your response so that we can spread the knowledge more far.

    Kind regards

    BearPup

  • My installed products are not appearing in the extensions Manager

    Help, my installed products are not appearing in the extensions Manager. See the image

    Screen Shot 2016-04-15 at 08.37.59.png

    If I understand correctly, the 2015 versions don't support the extensions more and each update manager to the new version of the provider, or install them manually. Also, this applies to own or download Adobe extensions from the market!

  • Why when I choose a photo in the library grid view it does not appear in the window to develop up to selected in the Filmstrip below?

    Why when I choose a photo in the library grid view it does not appear in the window to develop up to selected in the Filmstrip below?

    It was the strangest thing, but I think I solved the problem. Use the CC version 2015.1 on a Wacom tablet using Win 8.1 and inadvertently from the same batch of photos, I had downloaded twice and it was very confusing because it did not prevent the duplication of files, but the files where not really there. I didn't know whether to remove or delete the files with question marks for fear of destroying a link or something so merged files and now everything works as it should, once chosen in the library that the photo appears in develop mode.

  • I am trying to improve my Creative Suite 5 to creative cloud but to myself that I have are not eligible for the upgrade, did someone knows why?

    I am trying to improve my Creative Suite 5 to creative cloud but to myself that I have are not eligible for the upgrade, did someone knows why?

    If you have the education version you are not eligible due to the delivery of the HIGH education

  • I work to integrate AD with ADC, but there are a few users that does not appear on the ADC. Someone knows why?

    I have an ASA 5515 with module CX and I m trying to configure rules based on users of the AD. I have instaled CDA (context Directory Agent) and is integrated with AD and module CX and ASA and I have also set up rules on the ASA and module CX and works well. The problem I have is with users who does not appear on the ADC. When the user is on CDA is OK. But I should have more less 250 users on CDA and I only 171. I restart PC users doesn´t appear and after reboot, some users appear and others do not. Anyone know why this behavior?

    rgoncalves

    You can check a few things? Software version CX and your version of the ADC? Also do you have more than one domain controller in your environment? Also what version is DC?

  • Windows Media Player does not appear in the window when selected

    When you select Windows Media Player window does not appear, however, the 'media player logo' appears in the taskbar, including the thumbnail with my videos shown. When I click on the "logo media player" in the taskbar in the main window just flashes on the screen and does not remain.  Help would be appreciated

    Oscardog,

    I posted this article, assuming you had Windows 7 on your computer. My bad. Sorry about that!

    Make SFC scan and check if any system files are intact and fine.

    See http://support.microsoft.com/kb/929833

    In addition, create a new user and check the status.

  • Sites of bookmark in the file that does not appear in the window

    I need to put several websites in a folder, I named "Accessories". He is not one of the four files in the drop down window. So, I have to save it in one of the four and then open that folder and move the site to the "Accessories" folder

    Is it possible to change the four sites in the window (two of them that I haven't used in years)? Then go straight to this folder?

    The seal shows what is happening.

    What I want to do is to click "bookmark this page" and be able to put it directly in a folder.

    I want to change the four folders listed in the drop-down list.

    What I do is put a bookmark in the 'Western Short Story' folder, and then open up the bookmark in the "Accessories" folder that does not appear in the box.

    It's not a huge deal, but I'm working on about 20 sites today and I would like to save a few steps.

  • The things that I download do not appear in the window downloads, I don't know what to do

    When I download a document on the web, it does not appear under the download window (press ctrl + j to display the window if you do not know who I'm talking about).
    Anyway I can fix this?

    Tools > Options > privacy > Firefox will be: "Use the custom settings for history" > "Remember download history.

  • Mice are not appearing after the last update of Windows 8

    After update to the last version of windows 8, my mouse does not work on my computer no more. I use a "HAMA Optical Mouse AM-5000" and a 64-bit Windows 8 operating system to my office. Before the update, everything worked very well, but a little at the time (perhaps a week?) there was a software update that began when I shut down my computer for the night and after, my mouse wouldn't just appear. Then I want to restore my computer to before the update and everything would work fine. It happened maybe 3 times in the past week. Today, however, every time that I restored it to an earlier date, the mouse still does not. I tried the following things:

    Deactivation and reactivation of the mouse
    Uninstall the drivers and search for updates
    Try different mouse (2 USB, 1 green connector)
    Using the troubleshooting in the Device Manager tool, a fine of the question
    Non of them did it no matter what and I wonder if I'm the only one to receive the problem. and what I can do about it. Trying to navigate in windows using only the keyboard becomes very annoying XD.
    Thanks for the reply of Kevin,

    In the (Control Panel > system and security > Windows Update > View Update History) all there is "you have not tried to install the updates for this computer. There "18 updated important and 5 available optional updates to install, but I think that those who might be updates that have been the cause.

    In the (Control Panel > programs > programs and features > Installed Updates) there are a bunch of installed updates. The most recent is "Word Viewer 2003 Service Pack 3 (SP3): WDVIEWSP3" which has been installed on 26/09/13 and "update for Microsoft Windows (KB2889543)" which has been installed on 25/09/13.

    I downloaded the latest drivers from the mouse on the site that you have linked and no change. By chipset are you referring to the processor (Intel i7)?
  • Apps are not appearing on the SD card

    Hi, I have a Lenovo TB3-710F. I just transferred my other lenovo on sd card apps, then inserted the sd card into this LB3-710F. But the apps on the sd card are not displayed anywhere.

    Can someone please tell me what to do

    Thank you

    I see what you're trying to do. Which would not have worked, anyway, because you have just copied code application (APK file) program, but not its settings and data (backup of your game or other).

    It is possible to copy the Android applications from one device to another, including their settings and data. But it requires root, because otherwise you can not access the places where are stored the user applications and their settings. Titanium Backup is for example such an app that can back up and restore Android apps; but only on devices rooted.

  • New Adobe program updates are not appearing in the creative cloud, how do I download the new updates?

    As we pretty much all know any new updates to the Adobe programs has been released.

    I downloaded the updates on my desktop, but on my computer laptop Creative Cloud not gives me the opportunity to update and says that all programs are "up to date".

    How can I download the new updates on my laptop?

    Hello

    Please, try the following steps:

    Kind regards

    Sheena

  • Scaling on the rendering of the anomalies that are not appearing in the timeline

    Hello
    Just prepare a direct employment to customer preview tomorrow and AE threw me a curve ball.

    I have an object able to evolve from about 200% 70% about and it changes position at the same time. On a lower layer there are a blur value of the camera that is changing. So nothing too taxing, I got thing. When I render - scaling the object appears at the top and bottom and seems twinkle big and small for some images. I tried to make it again, but more or less the same thing is happening.

    No idea what this could be - someone met before?

    Purge the cache using the edition > Purge of orders. Also purge the cache to disk.

    Make sure that you have installed the latest updates ( http://adobe.ly/lsrkmJ ). They solve many problems.

  • Several widgets are NOT appearing in the drop-down list of the Interactions of 8.01.242 training

    Hey all -

    While trying to create a certificate, I noticed that the widget was not found in the Open box in drop learning interaction:

    2.PNG

    3.PNG

    When I looked under Insert: Widgets, I was taken to the Gallery on my C drive and open the Widgets folder, only to find empty folders or just the FLA source files. I have found the widget files in the folder of Interactions in the gallery and did notice there is a little more widgets displayed above:

    4.PNG

    Seems a bit intuitive meter, and is certainly not the way in which the normal user finds these things, no? My main concern is over the two latest updates and installs new e-Learning Asset, how much of the new material that has been available to Cp8 users I'm actually access to and how much is hidden in places that I normally do not dig in? Any help would be appreciated.

    For your information, Cp8.01.242 running on a Win7 OS - no admin rights - must leave all install and cannot progress without their help.

    Justenuf

    It is also possible that your widgets update downloads when you have Admin rights.  Since you mention that you don't have it and should participate in updates, which could also help to explain your situation.

Maybe you are looking for