Reset button when you press another button

Similar Questions

• Change the State of the button when you press another button

  Hi all

  I have a simple enough question, but just does not know how I can do this... I'm trying to switch between the two types of waveforms (sine and square) on a graph using buttons and a box structure.

  I currently have two buttons A and B. When I press A, it turns into real and displays the waveform 1. When I press B, B turns into real and displays the waveform 2. However, when B is true, I still have a permit as true (hurry)

  I can't figure out how to change the status of a return to false when you press B and vice versa.

  I am fairly new to Labview so if anyone can refer to a position where it is already the answer or point to the right direction, that would be appreciated

  Thank you

  Rather than clutter up the code with the event hidden cases (!), controls (!), value properties (!) and variable (!) local (as suggested above but not recommended at all!) In addition, it does not even work correctly!), all you need is a control radiobutton that allows also to "no selection". See attached (LabVIEW 2013). You could also add a third Boolean value for the sine wave and not dismiss "no selection" to make the code even more if auto-documentent.

  I made the transparent container radiobutton to match your existing style.

  

• new tab does not appear when you press the button "open"

  A few days ago I suddenly can not open a new tab when you press the button open tab , press file-> open the tab, or Open the tab button next to a tab...

  Uninstall the toolbar Ask and it should work again. There is a compatibility issue with the Ask and Firefox toolbar that prevents the opening of new tabs.

  There are a few places to check for the Ask toolbar:

  • Check the control panel Windows for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
  • Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

• HP Deskjet F4280 all-in-one scan does not work. Start button / stop flashing when you press scan.

  Scan does not not on my HP Deskjet F4280 all-in-One.  The power button flashes when you press scan. Everything else works.  I tried to unplug it from the wall socket and reconnect it.  Not solve the problem. What else can I try?  Or, is it a piece of junk now and needs replacement?   My laptop (windows vista) did not go into repairs several months ago. Don't know if that had anything to do with it.

  Hi woodcarver60,

  Follow the steps outlined in the documents below to scan from the software.

  HP Multifunction printers - how Scan: Windows 8 http://support.hp.com/us-en/document/c03511921

  HP Multifunction printers - how Scan: Windows 7 http://support.hp.com/us-en/document/c03476857

  HP Multifunction printers - how Scan: Windows Vista http://support.hp.com/us-en/document/c03517146

  Scan from Windows XP software with the full functionality of HP for the all-in-one HP http://support.hp.com/us-en/document/c03517150 printers

  HP LaserJet multifunction printers - how Scan: Windows 8 http://support.hp.com/us-en/document/c03755019

  Scan from Windows 7 with full HP software functionality for all-in-one HP LaserJet http://support.hp.com/us-en/document/c03584750 printers

  HP LaserJet multifunction printers - how Scan: Windows Vista http://support.hp.com/us-en/document/c03584647

  HP LaserJet multifunction printers - how Scan: Windows XP http://support.hp.com/us-en/document/c03584350

  All-in-one printers

  Win 8: c03511921 http://support.hp.com/us-en/document/c03511921

  Win 7: c03476857 http://support.hp.com/us-en/document/c03476857

  Win Vista: c03517146 http://support.hp.com/us-en/document/c03517146

  Win XP: c03517150 http://support.hp.com/us-en/document/c03517150

  Multifunction LaserJet printers

  Win 8: c03755019 http://support.hp.com/us-en/document/c03755019

  Win 7: c03584750 http://support.hp.com/us-en/document/c03584750

  Win Vista: c03584647 http://support.hp.com/us-en/document/c03584647

  Win XP: c03584350 http://support.hp.com/us-en/document/c03584350

• Why Satellite Pro A300 does not start when you press the power button?

  Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

  In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
  Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

  What should I do to get a normal departure procedure?

  When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

  When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
  The same thing happen on my Satellite A300.

• No Satellite A200-27R no response when you press power button / stop

  Hello

  Ive looked all over the internet and has spent weeks trying to understand the problem, but im at a loss.
  I recently replaced a cracked screen on my A200-27R and everything worked fine.

  A few days later, I started the new laptop and nothing has happened and has been the same since.
  The electric blue and the battery turns on but does not respond when you press the power button, not even the fan.

  I checked all the connections inside several times, checked without the battery, etc.
  I'm not sure what to try next, any ideas?

  Thank you

  Can you start cell phone if the battery is removed, with AC power only?

  You know, it's not easy to say what can be the problem.

• Hi, actually I want the program stops when you press the stop button. but the problem is the program is runing in loop only he doesn't return tile view deleted complete execution of any body can help me for this.

  Hi, actually I want the program stops when you press the stop button. but the problem is the program is runing in loop only he doesn't return tile view deleted complete execution of any body can help me for this.

  Here

• Boolean button changes color briefly when you press

  Hi, I use Boolean button is a toggle, so I want only text changes when pressed without changing the appearance of the button.

  I am able to change the color on properties to match the color Off (I use the silver palette so normally is yellow), but when the Boolean button changes to, there is a brief change of color again. Is there a way I can get rid of him?

  In fact, some of my buttons Flash black while others are flashing yellow. I have no idea where this is defined.

  Thak you very much.

  There are 4 colors for Boolean values ON and OFF more past of WE OFF and goes off to WE

  You see only the color of transition when you have the locking set of 'locking' Mech by releasing

  Set on "lock when you press on" and you will not see the colors of transition

  You can set all 4 colors by using the Colors property [4]

  Colors [4] property

  Short name: color [4]

  Request: Development of database system

  Class: Boolean properties

  Usage: Create a property.

  Table of up to 4 (foreground color, background color) pairs, where foreground color is the color of Boolean control foreground and background color is the background color of the Boolean control. Color pairs include False, True, true to False and false to True.

  You can set the color of the object of the façade by plugging in a hexadecimal number with the form RRGGBB or by plugging in the constant color box in the property.

  This property is similar to the option of colors on the page of the appearance of the Boolean properties dialog box.

  If the Boolean control has four (foreground color, background color) pairs for four States, this property always returns an array of four (foreground color), background color pairs during playback. When you write, you can pass an array of length 1, 2 or 4. If you pass in a single element, this property uses the value of the element for all four States. If you pass in two elements, this property uses the first value of the element to false and true false States. Similarly, this property uses the second element for the real and the fake in real States.

  If the Boolean control has one pair (foreground color, background color) for all four States, this property returns an array of pair (foreground color, background color) during playback, and uses the first element of the array when writing. You cannot change a Boolean control with (foreground color, background color) pair to a Boolean control with multiple (foreground color, background color) pairs.

  This property uses only the True to False and False to True States when you set the Boolean control to latch or switch when released. You can get and set these (foreground color, background color) pairs even if you do not have the control latch or switch value when released. they are not used.

  Because this property does not change the Boolean control data, you can set it at any time.

  You can use this property to Boolean control on the Classic, Expresspallets, modernand silver . You cannot use this property for Boolean controls in the System palette.

• is it possible to put in place a control of the event in labview to create a string indicator when you press a button

  I'm trying to implement a user interface where an operator can set the column headers for a report and I use indicators of the string as the placement for the text in the column headers.  Given that many of them will have experience with Labview, I was hoping to set a button with the ability to add or possible delete a string indicator when you press.  Is it possible to set up an event like this?

  You cannot create an indicator of the string, but you can change the visibility of the existing volumes.

  For example, you can display an indicator of the string, giving the impression that his creating.

  /Y

• PowerEdge T410 won't do anything when you press the power button / stop.

  My work has recently retired this t410 server. It worked without any problems when he was arrested. I had to remove and destroy the hard drives from the system. After that, I was allowed to bring home for my own use. I installed a new sata drive and plugged into the power supply and a free sata port on the motherboard. I get nothing when I tried to boot the system. This version has the unique power. Power light only lights up when you press the test button. System fan is going at full speed, but stops when you release the power button. Also on the control panel lights 1,2 and 4 and HDD power on and turn until the test button is released. There is a single green light lit on the motherboard, while it is plugged. Apart from that, I have no response when you press the main power button. Can anyone tell how to try to get it up and running again.

  -Who-

  I have not received the answers more so I think that this issue is ignored. So I'll let everyone know what finally happened. I solved my problem after a lot of electrical testing. I found a diagram of the arrangement of the power dell power supply pins and I made myself the best possible meter test. After several rounds of tests, I found several pins that did not have the right voltage. I bought a new power supply. I installed and replace everything. I plugged into the system and it auto fed on itself. I loaded from an OS and it works perfectly.

  Problem solved

• When you press the button to update on ipad, it says cannot connect to store

  When you press the button to update on ipad, it says cannot connect to store

  Contact Apple for problems with their equipment and services. http://www.Apple.com/

• I recently created a form to complete for the app e-business of the company. When you press the button submit, he only sent to our Inbox to project and not sent to the e-mail provided in the URL. Can someone help us to program the key to help explain why.

  I recently created a form to complete for the app e-business of the company. When you press the button submit, he only sent to our Inbox to project and not sent to the e-mail provided in the URL. Can someone help us to program the key to help explain why / tell us step by step what we should do?

  OK, I re-read your question. It's actually expected behavior. The user must manually send the email.

  If you want it to be a silent process, then you must either install a script on the local computer of the user who will do this, or use any email but something as a service web to which you directly submit the form data.

• A font I need is not available in italics. Corel Paint Shop Pro produces the police in italics when you press the Italic button in the software, but I don't see any way to do this in Illustrator. Help, please.

  A font I need is not available in italics. Corel Paint Shop Pro produces the police in italics when you press the Italic button in the software, but I don't see any way to do this in Illustrator. Help, please.

  Select the text and use the Warp tool to give a fake italic.

• drop off the list when you press the button

  Hello

  I use Apex4.2

  How can I view drop-down list when you press the button?

  
  

  environment or is it a solution to create the same interface as the apex dev

  Thank you

  Probably a lot of ways to do this, but I would just give the combo a hidden CSS class.

  Put this in your page inline CSS:

  . Hidden {}

  visibility: hidden;

  }

  and then on your issue in the HTML drop-down list box form element classes simply add this: hidden

  Then, create a dynamic action on click of a button using JavaScript to remove this class:

  $("#P10_YOUR_ITEM").removeClass ("hidden");

  See this example: http://apex.oracle.com/pls/apex/f?p=32581:2

  username: guest

  PW: app_1000

  Click the Show Drop Down List button and the menu drop-down element is displayed.

• Audio jack play and pause/stop when you press the various buttons

  Hi all

  I do a simple radio interface and I have 6 buttons which I want to have that specific preset song playing of the button located in the library screening and stop/pause the current song when you press any preset button.

  I tried to use the attachSound, with associated identifiers but don't know if it's the right way to go. He plays songs, but does not stop their...

  {mc_FM1preset1.onRelease = Function ()}
  {if(!this.) Toggle)}
  this.gotoAndStop ("release");
  radio_FM1. Text = FM1preset1
  FM1value = 1
  
  PlayFM1_1 = new Sound (this);
  PlayFM1_1.attachSound (FM1preset1_song);
  PlayFM1_1.start (0, 1);
  
  PlayFM1_6.pause;
  PlayFM1_5.pause;
  PlayFM1_4.pause;
  PlayFM1_3.pause;
  PlayFM1_2.pause;
  
  }
  }

  
  }
  {mc_FM1preset2.onRelease = Function ()}
  {if(!this.) Toggle)}
  this.gotoAndStop ("release");
  radio_FM1. Text = FM1preset2
  FM1value = 2
  
  PlayFM1_2 = new Sound (this);
  PlayFM1_2.attachSound (FM1preset2_song);
  PlayFM1_2.start (0, 1);
  
  PlayFM1_6.pause;
  PlayFM1_5.pause;
  PlayFM1_4.pause;
  PlayFM1_3.pause;
  PlayFM1_1.unload;
  
  }
  }

  then I tried just to put each piece in its own clip and using this code, but it still doesn't stop/pause the song.

  Stop();

  {mc_preset1.onRelease = Function ()}
  mc_song1. Play();
  mc_song2. Stop();
  }

  
  {mc_preset2.onRelease = Function ()}
  mc_song2. Play();
  mc_song1. Stop (1);
  }

  Does anyone have any suggestions? Any help would be great! Thank you!!!

  Basically, I just need to know how to do the supported mc or button to STOP / to PAUSE the song that plays

  Thank you!!!

  -PAt

  the sound class has no property of break.  It has a stop() method, you must use:

  {mc_FM1preset1.onRelease = Function ()}
  {if(!this.) Toggle)}
  this.gotoAndStop ("release");
  radio_FM1. Text = FM1preset1
  FM1value = 1
         
  PlayFM1_1 = new Sound (this);

  
  PlayFM1_1.attachSound (FM1preset1_song);
  PlayFM1_1.start (0, 1);
         
  PlayFM1_6.stop ();
  PlayFM1_5.stop ();  etc.
  PlayFM1_4.pause;
  PlayFM1_3.pause;
  PlayFM1_2.pause;
         
  }
  }

  }
  {mc_FM1preset2.onRelease = Function ()}
  {if(!this.) Toggle)}
  this.gotoAndStop ("release");
  radio_FM1. Text = FM1preset2
  FM1value = 2
         
  PlayFM1_2 = new Sound (this);
  PlayFM1_2.attachSound (FM1preset2_song);
  PlayFM1_2.start (0, 1);
         
  PlayFM1_6.pause;
  PlayFM1_5.pause;
  PlayFM1_4.pause;
  PlayFM1_3.pause;
  PlayFM1_1.unload;
         
  }
  }