Reset Droid and another question

Hello, all.

I've had my Droid for about 2 months (and so far, it's great), but I ran across a problem.  My phone completely drained of its energy, and when I plugged in my USB charger on my computer, it not turn on, then turn on ten minutes later, would record a charge (5%), then turn off itself and repeat the process in the course.  It seems that he is in charge, b/c, the light on the charger on the side is on, and when it is on, I can mount it on my computer (even though my computer does not recognize when it is plugged in, before re - start).  Tried to remove the battery and that got nowhere.  Any ideas?

In addition, my speakers tends to come out, but can be solved by a simple power reset.  It doesn't happen often, but it is common?

Thank you much for the help.

Yes there is something in the FAQ on the computer that does not not enough charge to activate the phone completely when he died. Simply plug the charger wall stock and you should be good to turn it back on in a few minutes.

https://Motorola-global-portal.custhelp.com/app/answers/detail/A_ID/38315

Here, he explains the third point of the main paragraph.

It will be useful.

Tags: Motorola Phones

Similar Questions

  • I have send security fotghotten... How to reset email and security questions

    How can I reset e-mail security? I forgot security question too

    Contact Apple security - Apple Support -  Contact security

    Reset your Apple security questions - Apple Support

  • Adding a RAID card to help speed up the export (and another question reader) in first Pro CC

    First of all, I read the Page Tweakers export section because that is my main concern is. First my questions, then the background and my current and proposed configurations:

    Question 1: Adding a hardware RAID controller, for example an LSI MegaRAID will sufficiently remove the burden of parity management CPU on my RAID 5 software that the CPU will jump of joy and export faster?

    Question 2: If true for above, then compare thoughts on adding smaller SSD for either a RAID 0 or less two RAID 0 volume volume complete HDD RAID 5. In other words, I think the purchase of four Samsung 850 Pro 128 GB SSD to put in a four disk volume to handle everything (projects/media, media, previews, export cache), or split it into two volumes of two disks of each and divide the tasks, or keep the idea of volume four disc and previews and exports on my drive HARD RAID 5 array.

    The 850 are valued at SEQ write: 550 / 470 MB/s so I could get around 2000 / 1500 MB/s read/write to a disk four RAID 0 or 1/2 who, if I divided in two volumes to minimize the volume of read/write at the same time, if it really matters with these SSD?

    The Tweaker page made some comments. A split is carried out the tasks between different drives, rather than a large effective RAID can really slow things down. Because SSDS are much faster than a single HARD disk, I think its more accurate than so I'm leaning towards the configuration of four discs put OS & programs on the C drive, media & projects on media on SSD (2 disks RAID 0) Cache and D (HDD RAID 5), file exchange & Previews & export on 2nd SSD RAID 0 (or combine the two RAID 0 and their functions).

    Just trying to get a point of view here, since I have not bought anything yet. Any experience/stories, I would be grateful.

    My current setup of training:

    My D drive is a software RAID 5 consisting of four 1 TB Western Digital RE4 (RED) 7200 RPM hard drives with CrystalDiskMark SEQ read/write of 339 / 252 MB/s.

    The C drive is 500 GB SSD (Samsung 840 (not Pro) and fact 531 / 330 MB/s.) My OS, Program Files and Page file are on C and media data/files/projects, etc. that are all about the RAID drive.

    Problem:

    Current configuration allows for smooth installation, just export seems slow, usually taking between two and two and a half times the video length to export. Thus, a 10 minute video takes 20-30 minutes for export. 15 minute video can take 30-40 minutes to export. The first 10% of the export of re-encoding takes less than a minute (seems fast), but it becomes slower when the final 10 or 20 percent may hang for several minutes as my system is running out of steam. So, where's the waste?

    I activated the hardware acceleration (because the GPU hack my GPU is not listed) and it can break through to 25% use a few times and eat up to 600 MB of VRAM (I have 2 GB of VRAM), otherwise it is slowed down export set. The CPU can boost at 50%, but it seems either too busy.

    Our calendar is simple with two video and two audio streams (a little music and especially the voices), with simple transitions (jump cuts or cross dissolves). Sometimes, we fast correct color, so that could use the GPU? Also, given that we are filming in 1080 P 60 p and 1080 export 29.97 FPS, I think who is scaling and using the GPU. I know that without the GPU, it takes much longer. I excluded buy a faster GPU because it doesn't seem to be breaking a sweat. I just need to know if my system is a bottleneck at the level of the disk hard because I am using software RAID and my disks are slow and hardware RAID will considerably reduce the processor load so it can export more quickly.

    Our files are not huge in nature. Most of our clips are several MBs each. Total files in the project are between 5 GB and 10 GB for each video with Windows Media File export being 500 MB to 1.2 GB on average. Look using Panasonic Camcorders, so the original files are AVCHD, I think (.) MTS files?).

    Considerations:

    1. I think to buy (and future proofing) a LSI Logic MegaRAID 9361-8i is 12 Gb/s SAS and SATA (because some SSD current can exceed the standard 6 Gbps).

    2. I will not replace my current HDD RAID 5 as not in my budget to spend 6 or more large SSD. These discs are more important to me for temporary storage because I delete files saved once. I don't mind a few smaller SSD inexpensive if they can make a significant difference for editing and export.

    I can only guess my RAID HDD is slow but the CPU is burdened by parity. I guess running RAID 10 would not really help.

    My configuration:

    my configuration:

    CPU - CPU i7 - 3930K @4.5 GHz

    RAM - G.SKILL Ripjaws Z Series 32 GB (4 x 8 GB) DDR3 2133 @2000

    Motherboard - ASUS P9X79 WS LGA 2011

    GPU - Gigabyte GeForce GTX 660 OC 2 GB (performed the hack of compatibility list to activate hardware acceleration).

    Drive C - 500 GB Samsung SSD (programs and Windows 7 Pro 64-bit) 840.

    D drive - four 1 TB WD RE4 enterprise hard drives 7200 rpm in RAID 5 software

    Box - Cooler Master HAF X

    CPU fan - Cooler Master Hyper 212 EVO with 120 mm fan

    Power - series Pro Corsair AX 850 watts 80 Plus Gold

    Optical drive - Pioneer BDR - 208DBK

    Thanks in advance,

    Eric

    OK, after overload of information on everything I tried (free), which might be my answer here. I went from codecs to export. When you use Windows Media File, Premiere Pro seems chugging along much slower than when you use the h.264 (not h.264 Blu - Ray). I don't know if it's because Microsoft has found a way to break it or what. But I'm the CPU usage of 70-85% on the 2 Pass of 2 as well as the use of the memory of 40% (or 12 GB). It exported in 14 minutes. Woo - hoo. I then did a similar test using Windows Media File. It took 31 minutes to export. The CPU has spent much of his time in the 30%, especially down in the 1930s mid-1940s with spike for memory usage was only 24% to 35% and 50%. Since then, I've read how h.264 codec is 'plu' for online files. It compresses better with less compression artifacts. He seems better, etc. Well, they both seemed on the same thing for me. I play both on my TV 70 "before I could comment further. In the future, I will consider a RAID controller and upgrade the HDDs to SSDS.

  • Overprint preview and another question...

    Hello...

    CS4, Win XP.


    Question of overprint Preview:

    The other day, I sent a file for printing (poster) in PDF and CS2. For some reason, the printer has converted the file to a .tif and print. Parties have abandoned... PDF files both CS2 was going well. Description below:

    1 / black background


    2 / on black (blue lines to form a wave) design element.

    3 / red and white logo. In addition, a line of red text. And any other text in white.

    The white of the logo has disappeared. The red line of text type disappeared... printed very faintly and only (I think only in parts). Printer tried to do a patch job to print the line separately and pasting... anyway... to cut a long story short, he wanted the final output in .tif. Ok...

    So, I converted in tif and of course... the missing parts... done a search here and found the solution - view the file in preview overprinting and then in attributes, turn off the overprint fill... so well...

    So the question is, why is that you get? And how, know early that x or is likely to cause a problem? I noticed in Bridge, that sometimes parts of a logo or a line of text does not appear... but it looks like in HAVE or Acrobat... give the cause, but not the reason.

    The other question...

    Same black case... placed Photoshop file/s with a transparent background... Fine prints to the printer (machines and various media)... But the series laserprinter a HP Color Laser Jet CP1510, there's a stain dark around the image (the area of the actual file).

    Once again, any ideas?

    See you soon...

    S

    Shunith,

    What happens if you save as PDF, and you mark print as Image when printing from Acrobat?

    Who can deceive a printer too useful.

  • Cannot perform the recovery of the space and another Question

    Hello

    New configuration of the environment. Received this error on a VM/pool:

    Failed to perform recovery of space on machine XXXX at XXXX of pool

    Is there anywhere I can see what is actually causing this failure? I don't see this on my other pools.

    Also, if I change a pool and change the image base and instant, he return to service the current virtual machine and maintain persistent drives? I do then a recomposition?

    I deleted and recreated the pool this morning. Error seems to have resolved now. Very strange.

  • I recently dropped my laptop and it is weird, one day he int open up to 4 start times and sometimes it shows me a folder and a question mark in the interface and sometimes asked to reset my password, what are the steps to take?

    I recently dropped my laptop and it is weird, one day he int open up to 4 start times and sometimes it shows me a folder and a question mark in the interface and sometimes asked to reset my password, what are the steps to take?

    Anything can be corrupted on your MacBook Pro, but from what you say, it seems that the cable drive/SSD/flash memory/SATA hard was seriously damaged. Him "question mark" means that your Mac is unable to find any bootable device, meaning that it does not yet detect your OS X drive.

    You should make a backup of your files (if you can still do it) and take the Mac at the Apple Store or dealer to get a diagnosis. There may be several damaged parts.

  • After installing an add-on to block trackers and another for managing cookies, I became impossible to log-in to Twitter and other sites

    I uninstalled and reinstalled Firefox, but it found all my old favorites and also restored the same problem, I've had before - I am unable to connect to what. How to start completely fresh? Or is there another way to solve this problem, restart the laptop did not help. or the other.

    This might be a good time to try refresh. This article has more information on what he keeps and he throws: Refresh Firefox – reset settings and Add-ons.

    Alternatively, you can just difficulty your cookies settings. Please read this article to learn how to maximize the compatibility of the site, and if it works, but you think it's too permissive, we can describe other options: Web sites say cookies are blocked - pledge.

  • I have reset firefox and lost all bookmarks. No backups.

    First of all I discovered I could no longer type a web address directly into the address bar and access a site. Then, on the advice of online support, I reset Firefox, and the result was that I lost all my favorites. I tried backup to a recovery point, but it was not good. Help!

    For best results, I wouldn't use Windows System Restore feature. This can lead to mixed files that do not work well together...

    You're low space by chance? Reset feature duplicates a lot of data and sometimes it does not end when the disk space.

    Could you search for your old settings folder in the following two locations:

    • Windows desktop: the folder named "old data of Firefox.
    • Firefox profiles folder: copy the following text and paste it into the search box on the start menu, and then press ENTER:

      %AppData%\Mozilla\Firefox\Profiles

      You will certainly find your current (incomplete) record, but there is also an older file (old modified sense just before your reset).

    If you find one of them, recover bookmarks, you can restore a backup by following the steps described in this article: restore bookmarks from a backup or move them to another computer. At the step where you choose file, point you Firefox in this profile folder everywhere where you found it, and then in the folder bookmarkbackups inside.

    You can also save other settings of the folder. This article can help, or for more specific help post-return: recovery of data from an old profile.

    A bit of luck so far?

  • I have reset Firefox and now I've lost the Favorites and the custom toolbar.

    I can't restore my custom toolbar. Got back bookmarks by following the instructions found. I can not understand how to restore the toolbar... I go to the "Troubleshooting" information and I click on the "view files", but the only 'local' in my opinion, is not dated before I reset Firefox and I do not understand ' click on Firefox and while it repairs... etc. ". I am pretty good at following instructions, but these baffle me. Help, please!

    I haven't seen that pop up...

    If you want to try to roll back the clock I can describe a procedure to do this. In short, it would be to create a new folder of parameters (a new Firefox profile), deletion of the contents of this folder and copy the contents of your old data from Firefox on the desktop file.

    Does not take long, if you are interested, but then you have to troubleshoot why the old profile was slow. Here's how:

    Resucitating your profile before reset

    (1) create a new Firefox profile:

    Close Firefox and starts in the Profile Manager, as described in this article:

    Use the Profile Manager to create and delete profiles Firefox

    Any time want spending profiles, close Firefox and come back to this dialog box. When you create a new profile, I recommend that you use the suggested default location, not to delete all profiles without first making backups. For quick reference, name the 12 profile so you can easily recognize.

    (2) when you start in the new profile, it is almost empty. Open the profile folder using

    Help > troubleshooting information > "view file" button.

    The bar of Windows Explorer should show a name combining random characters with 12.

    (3) keep this folder open, exit Firefox. Allow a few moments for Firefox complete update of the files in the profile folder. Then delete the contents of the folder new profile. This will leave you with a profile folder 12 vacuum.

    (4) in a separate window, open the folder of old data from Firefox on your desktop. Copy all the data of this file in the profile folder 12 vacuum.

    (5) run Firefox. It is expected to launch in which looks exactly like your discount to zero prior configuration.

    Now on troubleshooting. If Firefox feels slow, I suggest starting with Safe Mode. It is a standard diagnostic tool in order to avoid interference by extensions (and some custom settings). More info: questions to troubleshoot Firefox in Safe Mode.

    You can restart Firefox in Mode safe help

    Help > restart with disabled modules

    In the dialog box, click on 'Start mode safe' (not Reset)

    Any difference?

  • Yes, another question regarding the freezing of Safari - EtreCheck report included

    Yes, another question regarding the freezing of Safari.

    From a little over a month (I think), Safari started freezing regularly whenever I want to open new tabs or switch between tabs. I found myself to leave the program several times per day / hour. I can't identify any specific common cause (other than my MacBook being old) or any new software or updates that might have initiated the question. At first I thought he might have many tabs, I tried to open, but recently it happens even with only a few tabs open.

    I worked through the steps I found in this forum and others: empty the cache, start in safe mode, etc nothing works.

    Based on the previous suggestions, I have downloaded and run EntreReport which I included below. The note and maybe just a distraction, but EntreReport has crashed three times tonight, before he was able to produce the sub report. I ran the report after restarting my system with no other programs running.

    Suggestions are welcome at this stage because I want to start using Chrome or Firefox because I like the transfer procedure between my devices.

    Thank you in advance.

    Ben

    -----------

    EtreCheck version: 2.9.11 (264)

    Report generated 2016-04-28 22:48:58

    Download EtreCheck from https://etrecheck.com

    Time 05:45

    Performance: Below average

    Click the [Support] links to help with non-Apple products.

    Click [details] for more information on this line.

    Click on the link [check files] help with unknown files.

    Problem: Apps are broken

    Description:

    Safari freeze when opening new tabs / switching between the tabs.

    Hardware Information:

    MacBook Pro (15-inch, mid 2009)

    [Data sheet] - [User Guide] - [warranty & Service]

    MacBook Pro - model: MacBookPro5, 3

    1 2.66 GHz Intel Core 2 Duo CPU: 2 strands

    4 GB of RAM expandable - [Instructions]

    BANK 0/DIMM0

    OK 2 GB DDR3 1067 MHz

    BANK 1/DIMM0

    OK 2 GB DDR3 1067 MHz

    Bluetooth: Old - transfer/Airdrop2 not supported

    Wireless: en1: 802.11 a/b/g/n

    Battery: Health = battery check - Cycle count = 389

    Video information:

    NVIDIA GeForce 9400M - VRAM: 256 MB

    Color LCD 1440 x 900

    NVIDIA GeForce 9600M GT - VRAM: 256 MB

    Software:

    OS X El Capitan 10.11.4 (15E65) - since startup time: less than an hour

    Disc information:

    FUJITSU MJA2320BH FFS G1 disk0: (320,07 GB) (rotation)

    EFI (disk0s1) < not mounted >: 210 MB

    Macintosh HD (disk0s2) /: 319,21 go-go (54,93 free)

    Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

    HL-DT-ST DVD - RW GS23N)

    USB information:

    Built-in ISight from Apple Inc..

    Card reader Apple

    Apple Inc. BRCM2046 hub.

    Apple Inc. Bluetooth USB host controller.

    Apple Inc. Apple keyboard / Trackpad

    Computer, Inc. Apple IR receiver.

    Guardian:

    Mac App Store and identified developers

    Unknown files:

    ~/Library/LaunchAgents/com. GoodShop.updater.plist

    ~/Library/application support/GoodShop/updater

    A unknown file found. [Check files]

    Kernel extensions:

    / Library/Application Support/Symantec/virus

    [no charge] com.symantec.kext.SymAPComm (11.1.2f17 - 2015-05-23) [Support]

    / Library/Extensions

    [no charge] expressvpn.tap (20150118 - 2016-04-12) [Support]

    [loading] expressvpn.tun (20150118 - 2016-04-12) [Support]

    / System/Library/Extensions

    [no charge] com.DYMO.usbprinterclassdriver.kext (1.1 - SDK 10.9-2016-04-12) [Support]

    com.Silex.driver.sxuptp [no charge] (1.5.1 - 2016-04-12) [Support]

    com.symantec.kext.internetSecurity [no charge] (1.3.2 - 2016-04-12) [Support]

    com.Symantec.kext.IPS [no charge] (3.2 - 2016-04-12) [Support]

    Startup items:

    CMA: path: / Library/StartupItems/cma

    RosettaStoneLtdDaemon: Path: / Library/StartupItems/RosettaStoneLtdDaemon

    Startup items are obsolete in OS X Yosemite

    Launch system officers:

    [loaded] 8 tasks Apple

    [loading] 165 tasks Apple

    [operation] 65 tasks Apple

    Launch system demons:

    [loaded] 45 tasks Apple

    [loading] 161 tasks Apple

    [operation] 83 tasks Apple

    Launch officers:

    [no charge] com.adobe.AAM.Updater - 1.0.plist (2016-04-28) [Support]

    [failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2015-10-31) [Support]

    [operation] com.epson.Epson_Low_Ink_Reminder.launcher.plist (2015-01-19) [Support]

    [loading] com.epson.esua.launcher.plist (2015-06-29) [Support]

    [operation] com.epson.eventmanager.agent.plist (2014-09-21) [Support]

    [loading] com.google.keystone.agent.plist (2016-03-01) [Support]

    [operation] com.mcafee.menulet.plist (2016-03-23) [Support]

    [operation] com.mcafee.reporter.plist (2016-03-23) [Support]

    [loading] com.oracle.java.Java - Updater.plist (2013-11-14) [Support]

    [operation] com.symantec.uiagent.application.plist (2010-11-16) [Support]

    [operation] com.trusteer.rapport.rapportd.plist (2016-03-19) [Support]

    Launch demons:

    [loading] com.adobe.ARMDC.Communicator.plist (2015-10-31) [Support]

    [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2015-10-31) [Support]

    [loading] com.adobe.fpsaud.plist (2016-04-15) [Support]

    com.DYMO.pnpd.plist [no charge] (2014-10-16) [Support]

    [loading] com.expressvpn.tap.plist (2016-01-27) [Support]

    [loading] com.expressvpn.tun.plist (2016-01-27) [Support]

    [loading] com.google.keystone.daemon.plist (2016-03-01) [Support]

    [loading] com.macpaw.CleanMyMac3.Agent.plist (2016-04-18) [Support]

    [operation] com.mcafee.cspd.plist (2015-05-08) [Support]

    com.mcafee.ssm.ScanFactory.plist [no charge] (2016-03-16) [Support]

    com.mcafee.ssm.ScanManager.plist [no charge] (2016-03-16) [Support]

    [operation] com.mcafee.virusscan.fmpd.plist (2016-03-22) [Support]

    [loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]

    [loading] com.oracle.java.Helper - Tool.plist (2013-11-14) [Support]

    [loading] com.symantec.MissedTasks.plist (2009-11-10) [Support]

    [loading] com.symantec.Sched501 - 1.plist (2014-08-27) [Support]

    [loading] com.symantec.Sched501 - 4.plist (2015-01-08) [Support]

    [loading] com.symantec.Sched501 - 5.plist (2015-01-08) [Support]

    [loading] com.symantec.avscandaemon.plist (2009-10-10) [Support]

    [operation] com.symantec.diskMountNotify.plist (2009-09-14) [Support]

    [loading] com.symantec.navapd.plist (2009-09-14) [Support]

    [loading] com.symantec.navapdaemonsl.plist (2009-11-14) [Support]

    [operation] com.symantec.sharedsettings.plist (2009-07-22) [Support]

    [operation] com.symantec.symSchedDaemon.plist (2009-11-10) [Support]

    [operation] com.symantec.symdaemon.plist (2009-03-27) [Support]

    [operation] com.trusteer.rooks.rooksd.plist (2016-03-19) [Support]

    User launch officers:

    com [running]. GoodShop.updater.plist (2013-09-24) [Support]

    [loading] com.adobe.AAM.Updater - 1.0.plist (2015-10-25) [Support]

    [failure] com.facebook.videochat. [entrenched passage] .plist (2014-08-09) [Support]

    [loading] com.macpaw.CleanMyMac3.Scheduler.plist (2016-04-25) [Support]

    Items in user login:

    iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

    Application of Google Reader (Google Drive.app/Applications /)

    Dropbox application (/ Applications/Dropbox.app)

    ExpressVPN application (/ Applications/ExpressVPN.app)

    CleanMyMac 3 Menu Application (/ Applications/CleanMyMac 4.app/Contents/MacOS/CleanMyMac 3 Menu.app)

    Other applications:

    [ongoing] com.DYMO.pnpd

    [ongoing] com.getdropbox.dropbox.83552

    [ongoing] com.google.GoogleDrive.81632

    [ongoing] com.macpaw.CleanMyMac3.Menu.80672

    [ongoing] com.mcafee.ssm.ScanManager

    [ongoing] com.mcafee.virusscan.ssm.ScanFactory

    [loading] 420 tasks Apple

    [operation] 193 tasks Apple

    Plug-ins Internet:

    o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-16) [Support]

    Default browser: 601 - SDK 10.11 (2016-04-18)

    Flip4Mac WMV Plugin: 2.4.4.2 (2012-12-25) [Support]

    DYMO Safari Addin: Unknown - SDK 10.9 (2014-10-26) [Support]

    AdobePDFViewerNPAPI: 15.010.20060 - SDK 10.8 (2016-03-11) [Support]

    FlashPlayer - 10.6: 21.0.0.226 - SDK 10.6 (2016-04-25) [Support]

    Silverlight: 5.1.30514.0 - SDK 10.6 (2015-09-16) [Support]

    QuickTime Plugin: 7.7.3 (2016-04-12)

    Flash Player: 21.0.0.226 - SDK 10.6 (2016-04-25) [Support]

    googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-11) [Support]

    iPhotoPhotocast: 7.0 (2010-11-15)

    AdobePDFViewer: 15.010.20060 - SDK 10.8 (2016-03-11) [Support]

    SharePointBrowserPlugin: 14.3.0 - SDK 10.6 (2013-02-09) [Support]

    SiteAdvisor: 2.0 - 10.1 SDK (2015-03-30) [Support]

    JavaAppletPlugin: Java 8 updated 77 03 (2016-04-18) check the version of build

    Safari extensions:

    AdBlock - BetaFish, Inc. - https://getadblock.com (2016-03-30)

    Add to wishlist Amazon - Amazon.com - http://www.amazon.com/wishlist?ref=cm_wl_saf_ext (2011-07-09)

    GoodShop - GOODSEARCH LLC - http://www.GoodSearch.com (2013-09-24)

    SiteAdvisor - McAfee - http://www.siteadvisor.com (2015-09-28)

    PIN button - Pinterest, Inc. - http://www.pinterest.com/ (2015-07-03)

    3rd party preference panes:

    Flash Player (2016-04-15) [Support]

    Flip4Mac WMV (2012-05-15) [Support]

    Growl (2015-09-16) [Support]

    Java (2016-04-18) [Support]

    Norton\nQuickMenu (2010-11-16) [Support]

    Trusteer Endpoint Protection (2016-04-18) [Support]

    Time Machine:

    Time Machine not configured!

    Top of page process CPU:

    5% WindowServer

    1% kernel_task

    0% fontd

    0% SymDaemon

    Top of page process of memory:

    445 MB kernel_task

    Mdworker (18) 430 MB

    164 MB Google Reader

    Dropbox 123 MB

    VShieldScanner (4) 66 MB

    Virtual memory information:

    106 MB free RAM

    4.15 GB used RAM (770 MB cache)

    6 MB used Swap

    Diagnostic information:

    April 28, 2016, 22:42:12 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-224212_[redacted].crash

    com.etresoft.EtreCheck - /Applications/EtreCheck.app/Contents/MacOS/EtreCheck

    28 April 2016, 22:21:42 self-test - spent

    April 28, 2016, 19:49:12 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-194912_[redacted].crash

    April 28, 2016, 19:47:10 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-194710_[redacted].crash

    April 28, 2016, 19:38:58 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-193858_[redacted].crash

    April 28, 2016, 19:04:58 ~/Library/Logs/DiagnosticReports/rapportd_2016-04-28-190458_[redacted].crash

    /Library/rapport/*/rapportd.app/Contents/MacOS/rapportd

    April 28, 2016, 06:06:59 /Library/Logs/DiagnosticReports/Safari_2016-04-28-060659_[redacted].hang

    /Applications/Safari.app/Contents/MacOS/Safari

    April 28, 2016, 12:48:04 AM /Library/Logs/DiagnosticReports/SubmitDiagInfo_2016-04-28-004804_[redacted].cpu _resource.diag [details]

    / System/Library/CoreServices/SubmitDiagInfo

    April 27, 2016, 22:01:10 /Library/Logs/DiagnosticReports/Safari_2016-04-27-220110_[redacted].hang

    April 27, 2016, 21:57:37 /Library/Logs/DiagnosticReports/Safari_2016-04-27-215737_[redacted].hang

    April 27, 2016, 19:05:50 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-27-190550_[redacted].crash

    April 27, 2016, 06:57:28 ~/Library/Logs/DiagnosticReports/Airmail 2_2016-04-27-065728_ .crash [deleted]

    / Applications/Airmail 2.app/Contents/MacOS/Airmail 2

    26 April 2016, 19:48:11 /Library/Logs/DiagnosticReports/Safari_2016-04-26-194811_[redacted].hang

    Remove all apps viruses you have

    Symantec, McAfee, Norton...

    CleanMyMac3

  • Satellite A660: Comment and a question about button lighting / mute

    Note:

    Hi, I'm the proud owner of a satellite A660-166 (3 days) and I installed everything from scratch on the win 7 pro because I got my laptop with a home (need pro for work) version... I met some problems, but this forum really answered my questions :) Never found such a useful for technical support forum. I wanted to express my gratitude and my support for everything you do for users :)

    Problem: well, this isn't really a problem, more a curiosity... I had a few problems with the key eco, at this time there button lighting / mute was to mute... Thank you guys, I found out what needed to be done, I reinstalled the Flash card software and everything worked properly more the lighting button / mute has been for enlightenment now. I have nothing against that, I prefer it like this, but I wonder how to change that... I found some response on the use of toshiba wireless Assistant and the illumination tab... Because my laptop is fairly new, that I do not have a tab of enlightenment, I was wondering how to change the mute button if I want to?

    Thanks, keep up the good work!

    It's nice to hear that you found answers to your questions here. Many people here trying to help.

    Back to your question: it is not easy to give a precise answer and I really put t know if you can change the settings of a single button. I think it has something to do with the registry entries, but how to change, that's another question.

    If you use this button for lighting ON / OFF, you can use FN + ESC for the mute button so you have two options that can be used with a touch or quick key combination.
    Can you please test and confirm that it works correctly?

  • CLAD/CLD/PMC and renewal questions

    Im not sure where to post this?

    Well, I was finally convinced and a little forced to try to assure me. Have always been a stubborn but on this subject, but I guess that's the way it goes - beeing a consultant. Ive read through all - CLAD, CLD and CLA.

    But if Im going to certify I would and try to CLA (just becaurse I am a bastard of stubbern), actually more personal Im interested in the topics and requirements of CLA than the rest and felt more comfortable with them. Now I read that taking CLA you need a CLD, and to take the CLD, you must have DRESSED.

    1. -why is this? As a guy who lives on the contracts on time will be quite expensive? How much does it cost? and how long will take this assessment?

    - 2 plated RCA, I take it online? "Pearson view", it says I have to choose a company from here to Oslo where Im going to take it.

    - 3 also another question, if you finally have the CLA, you should also re-eval your CLD and CLA after two years (both) or only the CLA? and how much it cost and do you need to use a whole day to re-eval, or a renewal more as a CLAD?

    - 4 also in regards to the CLD, see examples and stuff like that, Im afraid that I will not be finished with it, mainly becaurse all examples show a program with only a certain time-simple loop. I'm at least going to have several modules (completely overkill for the applet, also to all the own errorhandle module and other things), even though most of them hold so much code, it's the right way to create a program you can actually add new features to (which is also totally different the existing program) without having to re - edit; creation of spagetti or not understandable disorder (have seen pretty unique all in programs of loops with a simple state machine and the structure of an event, which proved to be a mess completely after a few years with a few improvements here and there (well it keeps me alive as a consultant ).) I am used in small projects (such as examples for the CLD Exam) to use my own application with modules/structures model I created previously, totally exaggerated to have for applications Minies, but it works better, less consuming and is a LDO application you are familiar with. etc. Now for me to use this, but Im going to worry I won't be finished in time since I arrived to set up the structures and typedefs of 0 (I guess that the CLD Exam time will be 1 hour, planning, 2.5 hours of programming). How does this reflect on your score to a CLD? If you create a better environment for application (which is better suited for CLA) but you're not totally finished, which will count - or not?

    * worried *.

    Hello

    Your questions:

    (1) examinations rely on each other. This isn't review CLA itself that makes you a CLA, it's all the way to get it. And all tests have different requirements also. The price of Norway is he in NOK: CLAD: 929 - CLD: 2099, - and CLA:2099,-. How long it takes depends on when you get the investigation on each exam and your schedule.

    (2) you can take the CLAD to Pearson VIEW in one of the places that they list. Other tests should be done at OR.

    (3) simply re-eval latest or highest certification, you have, so hopfully CLA then. If you miss to re-eval, you'll have to start CLAD.

    (4) for both the CLA and CLAD, you have 4 hours of time to do. You get different scores, so in summary, build you an overall score. For example, who meets the requirements, so that the application runs as it should get a score, to keep the style guidelines you get a score, documentation and so on.

    Christian

  • Kindly unblock my account that I don't remember my email and Security Question.

    Kindly unblock my account that I don't remember my email and Security Question.

    I received important emails in the account. He has been blocked it for a month now.

    Kindly unblock as soon as POSSIBLE.

    I'll be very grateful.

    Thank you.

    Hello

    If you are referring to a Hotmail account, read this

    I'm sorry, but we cannot help with hotmail problems in Microsoft answers Feedback Forum you send to

    Please repost your question in hotmail in the hotmail link below forums

    http://windowslivehelp.com/product.aspx?ProductID=1

  • The upgrade of RAM and warranty questions

    Hi all

    So, I have a dv6-7031tx, which has 4 GB of Ram. Now I want to remove the 4 GB of Ram on my laptop and replace it with 2 sticks of Ram of 4 GB, will be canceled warranty if I do this? The RAM brand im going for is G.Skill, Patriot or Kingston.

    Edited: I talked to HP support last week and apprently they recommend not third party as G.Skill RAM, they recommend only Mircon. I know not even how good are the Micron reputation and they are not well known.

    Thank you.

    Hello:

    You will not void the warranty by installing the memory of any provider.

    The only way you will cancel the guarantee is if damage you the memory slot, plastic cover, physically or does not follow the procedures in the service manual to install memory (like removing the battery and the power of a/c before working inside your laptop.

    I used the Patriot, G.Skill, Kingston, Crucial, Mushkin in HP laptop computers and desktop PC with a lot of success.

    I can also tell you that HP uses no chips Micron exclusively in their PC.

    Question... Why do you want to delete a module of memory 4 GB perfect condition except if they put a PC3-1333 chip here and you want to install 2 PC3-12800 (1600 MHz) memory?

    Another question?  If this is the case, why go to halfway?

    I just max the thing out to its capacity of 16 GB and buy 2 x 8 GB PC3-1600 (PC3-12800), memory modules.

    The page of the form is incorrect about the maximum of 8 GB.

    Please consult the owner's manual at the link below, Chapter 1, page 4.

    http://h10032.www1.HP.com/CTG/manual/c03216834.PDF

    Paul

  • Laptop card mother size and structure question

    Here of another question, I have acer aspire 4755g, and in this series, they have a lot of different types of processor but it still have the same shape and design. If I want to replace my old motherboard with a motherboard latest and modernized, my old one so intel i5 and gt540m 1 GB of ram, I want to replace it with the new motherboard coming with i7 and gt540m 2 GB of ram, I checked that the motherboard was of the same type in terms of chipset and version in some of the series of line acer4755g , so what worries me is that I'm afraid if I use the new motherboard does not correspond to my laptop, I want to say I'm afraid that the alignment of the screw will not be the same in my laptop, so I need some, it will be ok if I just buy the new motherboard for my laptop? has anyone have the same problem as me? anyone ever change their motherboard with a newer version and it can still work perfectly?

    link on acer 4755 g - http://specificationslaptop.blogspot.com/2012/05/acer-aspire-4755g-intel-core-i7-full.html

    Hello mangaboy190,

    It's me again!

    The Aspire 4755 G comes in 4 colors: Brown, black, red and green.

    There is only a single lower lid for all models.

    As the motherboard is mounted on it, the distance between the mounting holes are identical.

    Two motherboards and a low cover so...

    The bottom cover part number:

    60.RPT01.001COVERAGE. LOWER

Maybe you are looking for