Reset License monitoring ReadyNAS

Similar Questions

• problem of password in connection with monitoring ReadyNAS

  Dear support team,

  I installed ReadyNAS a bit faster Surveillance a few days ago and totally forget the login and the password for this app.

  I already tried to delete and reinstalled without success.

  Could you help me please to reset or do a clean uninstall of this app to run to reinstall it properly (to avoid reinstalling all the NAS)
  The application runs on a ReadyNAS 104 with the 6.1.4 company.

  Thanks for your time and your support.

  As described in the manual I have tried "admin/netgear1" without success. But "admin/password" has worked...

• Monitor Pavillion22bw: impossible to reset the monitor to factory setting hp

  I've been setting up a new monitor, Pavilion 22 forbw and our laptop brand new, Pavilion x 2 10 detouchable.  When we tried to solve a black band around window, we have adjusted the configuration of the monitor.  Since we are new on both devices and win 8 or 8.1 we must have done something we did not want.  As you may have guessed, we are not really competent in PC set ups.

  Please, help us to these problems.

  1: the monitor display purple tinted image, while the computer screen is normal.

  2: the factory reset on the monitor does not work as if the purple hue is the default setting.

  3: the initial problem of the black band is still there.  We have 22 '' monitor but it shows only the size of a 15 "or more.

  Thank you

  Hello @idontlikewin8,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how a black band is visible on the monitor of your desktop once implemented and I would be happy to help you in this case!

  I provided you with a few steps, you can try below:

  Step 1. Unplug the power cord at the back of the screen and the wall
  Step 2. Press and hold the power button for at least a minute
  Step 3. Plug the power cable in the monitor, and then to the wall outlet (not a power bar or surge protector)
  Step 4. Press the Menu button on the monitor
  Step 5. Navigate to the factory reset option and select
  Step 6. Try a different cable to connect your monitor to your computer

  If the steps above did not resolve your issue, you can try the monitor on a computer or other device to see if the problem persists. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Thanks for posting on the HP Forums. Have a great day!

• How to contact local support to reset licenses

  Hello.

  About a month and a half ago my laptop has had a serious hardware failure and could not be retrieved. So I bought a new laptop and cloned the old drive. Since Adobe Lightroom is complaining about the "serial number * is already in use by the maximum number of computers." You must disable another computer [etc.] ". I've seen so far, since I can't turn off the dead laptop, I need Adobe to reset the association between my license and my old laptop. We have to do it by contacting my local assistance (in Italy). It is only available through chat, but whenever I try to access the chat with my browser I see the message "The cat e al momento chiusa" (Chat is currently closed). Of course I don't mean days public holidays, but during normal office hours, and nothing changes.

  Whas am supposed to do?

  Needless to say, this is a very heavy approach for the management of licenses. The option reset all links between the licence and the computers should be doable online, without all this hassle.

  Thank you.

  IIRC licenses is a global problem, not limited to the regions. It has no Italian Adobe which is a completely separate entity from Adobe to the US or UK or France or anywhere else. Of course, there are different versions of the website, languages, local, regional versions of all the software and the support forums, but it's still all Adobe.

• Please reset license for Adobe Indesign Server CC

  Hello

  You can reset this license as it has error "authentic Adobe software transmissions Failure"?

  Previously I installed AIS CC on this server it can install, but I have another problem so I full-installed server found that AIS CC cannot install.

  Kind regards

  Tongpol
  

  It may be faster to solve this problem by contacting adobe support, http://www.adobe.com/support/chat/ivrchat.html

• Monitoring of ReadyNAS on ReadyNAS 104

  IM using a ReadyNAS 104 and want to use to record the flow of our surveillance cameras. Unfortunately application of monitoring ReadyNAS does not supports more of a camera and recording on motion that makes it completely useless for my application. Is it possible to purchase a license to get a record on motion works on a series of 100 ReadyNAS or is it simply not supported?

  A little off topic, but I finally got the camera to record directly on a ReadyNAS share. All I had to do was setting a quota for such action and finally formatting worked. What the camera calls of formatting are actually create some files binary index and a bunch of zero-byte files hivXXXXX.mp4 which then slowly getting filled with video data.

• Satellite A200-1AX - External monitor reset

  I got my car and Acer monitor 20 inch and after a few minutes of use resets the monitor (becomes black and goes up to 1280 x 800).
  I tried on a different Satellite A200 with same works card (my brothers) like a charm, but when his hook on mine it keeps resetting. And also I see horizontal lines on the screen.

  My model is TOSHIBA Satellite A200-1AX (with a vga HD 2600 card).

  Hello

  You can disable the option in the power options of Vista to prevent mode standby when the lid is closed.

  > I got my self and Acer monitor 20 inch and after a few minutes of use resets the monitor (becomes black and goes up to 1280 x 800).
  However, reading this post I'm not sure if your external monitor goes black or the A200 display internal.
  Is what screen affected?

  Did you try a BIOS and update the display driver?
  If this is not the case, check this box!

• U2412M monitor factory Reset problem

  When you try to Factory Reset my monitor, when the box "Are you sure you want to reset to the default settings?" appears, I can't my cursor in the box to get to 'Yes' / 'no '.

  The cursor continues to go behind the message box.

  Any suggestion would be appreciated.

  The manual is not in the details, but you must use the buttons on the monitor down to somehow select Yes, then accepts when the green check mark.

• Reset every 30 minutes after loading the product key valid evaluation license key.

  OPERATING SYSTEM.  Windows Embedded Standard 8

  By the intermediary of "slui 4" to enter the OEM product key, the product key is accepted.

  By 'System', the 'activate Windows' shows "Windows is activated", product ID: 00227-20010-00864-AAOEM.

  By "slmgr /ato" cmd error: 0x80072EE7 on a computer running Microsoft Windows non-core, run 'slui.exe 0x2a 0x80072ee7 to display the error text.

  Via "slui.exe 0x2a 0x80072ee7" cmd, it showed "You can also contact Microsoft by phone to help solve this problem" and the description showed "the server name or address could not be resolved."

  In addition, under the c:\Windows\debug\wlms.txt, it showed the following every 30 minutes.

  2015-11-05 15:03:27, info WLM Windows Embedded Licensing Monitoring Service starts.
  2015-11-05 15:03:27, info WLM entering ServiceMain.
  2015-11-05 15:03:27, the status of the service Info WLM Reporting 2
  2015-11-05 15:03:27, Service Info WLM Reporting as 4 State
  2015-11-05 15:03:30, info WLM license isn't an evaluation license.  EVAL in the image of production not supported.  It stops immediately.
  2015-11-05 15:18:33, WLM the license info is not an evaluation license.  EVAL in the image of production not supported.  It stops immediately.
  2015-11-05 15:33:35, info WLM license isn't an evaluation license.  EVAL in the image of production not supported.  This computer shuts down
  2015-11-05 15:33:36, WLM Service info received control message 5
  2015-11-05 15:33:36, Service Info WLM Reporting as 3 status
  2015-11-05 15:33:36, pulled out of WLM Info event.  Stopping service.
  2015-11-05 15:33:36, Service Info WLM Reporting 1 status
  2015-11-05 15:33:36, info WLM out ServiceMain.
  2015-11-05 15:33:36, info WLM Windows Embedded Licensing Monitoring Service is out.

  Help, please. Thank you.

  I believe that the error is to tell you that you can not migrate an eval version to a production version.  I suspect that you will have to wipe and install

  The license is not an evaluation license.  EVAL in the image of production not supported.  It stops immediately.

• Monitors flicker and "Input Signal Out of Range"

  Hello!

  I have a Mac Mini (end 2012) 2.3 GHz Intel core i7 running up-to-date El Capitan, with two HP monitors 2071d.

  These monitors have DVI connections. It is connected with Mini DisplayPort to DVI adapter, and the other with HDMI to DVI adapter (provided with the Mac Mini).

  Everything has been fine for a year until this week. Two monitors are:

  (1) intermitantly began flickering of the scrambled images

  (2) flickering intermittently at black or white noise

  (3) intermittently flickering white noise

  (4) the message of the form 'input out of range Signal. 1600 x 900 at 60 Hz settings."

  How is this problem go and come, but rather continues today.

  After research, I tried to start safe mode, but the problem persists.

  I read that put the computer to sleep and then wake up could solve this problem... it worked a

  couple of times, but the issue soon returned.

  I tried to reset several times VRAM/LANDAU and SMC.

  I doubled checked all the connections.

  Under the system of preferences > display (when the image is stable long enough for me to see) everything looks OK. Under the screen of the 'Default display' tab is selected. On the color tab, there are three HP2071d listed (with a selected) in the window display profiles. I've linked by selecting one of the other "HP2071d" listed without noticeable change.

  I also reset both monitors to factory settings via the menu screen of the monitors.

  I also came across this mini Mac EFI Firmware Update 1.7 for flickering on end of 2012 Mac Minis, but when I tried to run I got "this software don't is not supported on your system. Ugh. It turns out that my Mac Mini is already updated to MM61.0106.B0A (2015-002)

  My Information System > Hardware > graphics/display info is:

  Graphics Intel HD 4000:

  Chipset model: Intel HD Graphics 4000

  Type: GPU

  Bus: integrated

  VRAM (dynamic, Max): 1536 MB

  Seller: Intel (0 x 8086)

  Device ID: 0 x 0166

  Revision ID: 0 x 0009

  Exhibition:

  HP W2071d:

  Resolution: 1600 x 900 at 60 Hz

  Per pixel: 32-bit color (ARGB8888)

  Display serial number: 6CM3171PFF

  Mirror: on

  State of the mirror: mirror material

  Online: Yes

  Rotation: support

  HP W2071d:

  Resolution: 1600 x 900 at 60 Hz

  Per pixel: 32-bit color (ARGB8888)

  Display serial number: 6CM3170P31

  Main screen: Yes

  Mirror: on

  State of the mirror: mirror of Master

  Online: Yes

  Rotation: support

  I am of the ideas of what else to check/try.

  Thanks for any assistance that anyone can provide.

  bdcs64 wrote:

  Hello!

  I have a Mac Mini (end 2012) 2.3 GHz Intel core i7 running up-to-date El Capitan, with two HP monitors 2071d.

  These monitors have DVI connections. It is connected with Mini DisplayPort to DVI adapter, and the other with HDMI to DVI adapter (provided with the Mac Mini).

  Quite the same configuration except here, with 2 Samsung S22B310 DVI monitors on an i5 2.5 GHz in late 2012.

  Everything has been fine for a year until this week. Two monitors are:

  (1) intermitantly began flickering of the scrambled images

  (2) flickering intermittently at black or white noise

  (3) intermittently flickering white noise

  (4) the message of the form 'input out of range Signal. 1600 x 900 at 60 Hz settings."

  How is this problem go and come, but rather continues today.

  Both monitors isn't good. Which would lead us to think that the Intel HD 4000 is overheating and the problem is not with any of the adapters or cables. Although, if one of the cards was not internally, it could put additional heat stress on the graphics chip.

  Personally, I will try a few things.

  1. turn off, unplug everything, open the bottom cover and give it a good cleaning to make sure it cools properly.

  https://www.iFixit.com/device/Mac_Mini_Late_2012

  2. try each monitor individually for awhile configurations see if the problem follows the monitor cable adapter installation.

  (I know he'll be a brake after obtaining used monitors to double)

  3. try using > MacFanControl to monitor and help control the temperature of the GPU ITPP.

  http://www.CrystalIDEA.com/Macs-fan-control

  FWIW, I do not use screensavers, but I do a lot of videos as well as some games of light on both my 2010 and 2012 of the Mini and I really believe that MacFanControl has really helped to extend the life of graphics on these two systems.

  I use the control based on the sensors on the sensor of GPU ITPP and configured so that it starts slowly rise in power of the fan above 129' F

  

• Impossible to use the DVI - D port with cable DVI - D Pav 500-100 a to HP W2207 monitor

  I have a new standard of factory Pav 500-100a without mods.  HP w2207 monitor.

  Currently properly connect with VGA DVI - D port with the adapter supplied with the pc.  I have install Windows Update 8.1, put in my files from my old PC and everything was fine except the video is not very good.

  I got a formwork of cable DVD, but it's a DVI-I have the cable.  It took 5 minutes before windows comes up and then whenever the background picture changed in the theme which he suspended for a few seconds.  I read that I have a DVD-D need cable which i purchasd today.

  The package says it's a CL-DVI2M - DVI M/M 24 + 1 CABLE 2 M.  The tech in the store said that it is a good calbe and works perfectly.

  When connected and power until I get the hp and rolling points logo, then it turns off.

  I reconnect the cable VGA and all its beautiful - using the VGA to DVI.

  I ran msconfig and turned from secure boot - restarts and comes well in safe mode.  I set the resolution of 1280 x 800 and rebooted and reconnected the cable DVI - Virgin again.

  If I put the cable VGA back inside fine boots.  The monitor was given factory and seens the DVI connection but Windows remains empty. Also tried to start first with no cable - connect the DVI and the monitor remains in sleep - be able to reset the monitor and still a Virgin is also no connection DVO.

  I have fI switch with connected DVI I can get to the BIOS, and I see the HP logo and the points Win 8 starts.

  I don't know what else I can try.  I have no other usable with DVI video card

  Any ideas out there?

  Pls help - Steve

  Although I am an employee of HP, I speak for myself and not for HP.

  Yes, I rasthaus the monitor and cable of my older Compaq running xp and all fine on DVI.  The monitor and cable are fine.

  Since then, I've had a product in Australia specialist help.  Tried all the previous things, then initially went to check if the person had been doing the right thing - connected the VGA monitor with the supplied adapter DVI-d port - which has always worked well.

  Went to Device Manager o and removed the video card adapter. Powered off and then attached the monitor directly with DVI and it started late! Drviers reinstalled and updated and now I have nice crisp clear video appears.

  Something of the support person should apparently have - insead has asked me to wipe the hard drive and restore the factory system, replace the cables, buy a new monitor... was even asked to leave VGA mode and do not use DVI!

  Thank you for your help, Dave, its good to know that you are around to help us.

• Automatic configuration of the HP w17e monitor active at random

  Currently using an hp w17e flat, wide LCD screen connected to a NVIDIA 9500 GT video card located in a computer that is running Windows Vista Edition home premium (32 bit).  Running on 1440 x 900, 60 Hz frequency suggested by the insertion of the packaging of refreshment. Also in the 32-bit color setting.

  (Other computer stats available at http://www.compusa.com/applications/searchtools/item-Details.asp?EdpNo=4419976&sku=T71-3446%20ON&srkey=3000%20H210%2057088788)

  Tuesday night (13/10/2009) let my computer playing music with the monitor off.  Morning, Weds(10/14/2009) and any platform is off.  Turn it turn it back on and seems to update windows pushed a lot of updates.  Then I noticed the problem.  Randomly, the automatic configuration of hardware on the monitor turns on.  Tried different applications (games, firefox [windowed and full screen], or just sitting on the desktop), and the Automatic Configuration dialog box appears in the center of my screen and shakes the screen.

  Monitor checked button, it is not blocked (before this, don't think I hit a few months...)

  No change, I tried older drivers I had before the update of windows, still didn't try to update the NVIDIA drivers, arrives.

  Reset the monitor through the monitor menu.  Still happens.

  Reset the NVIDIA graphics settings, still happens.

  Installed the update optional windows update for the hp w17e LCD wide display.

  Monitor connection video Cable disconnected to the video card, checked pins, pins are good.  Reconnected.  Still happens.

  Tried to connect to another video on the port of the video card (always the same type of connection).  A reduced frequency, but screen looks flatter and more gray/less dynamic.

  She returned after swapping the video ports when I open the NVIDIA Control Panel.  Didn't jump once while typing this.

  Suggestions?

  Updated several days later.

  After the passage of the screen to the other video port on the back of the computer (vid card has 2 ports I could use, been using a) and disconnect / reinstalling the power cord on the monitor itself, auto config jumped just once shortly after reconnection of everything and not since.

  Weird and intrigues me, but hey, if it works now, will to run with him.

• 19 inch monitor DELL got stuck because of the economy of energy to push power button

  Hello:
  Reference Dell 19 inch monitor come with Mini-tower/XP:

  The screen does not appear because of the "power saving" push the button "power" at the bottom right, although the PC works well. When I used the other monitors, hp and Acer with the same Dell PC, the screen comes right off.  Only DELL monitor does not display the screen due to energy savings.

  How to save energy "rut" in order to get the screen?

  Thank you for your help in advance

  Hello Yama'el,

  What is the model of your Dell monitor?

  I suggest you to refer to the suggestions from this link and reset the settings of the monitor to their default values.

  How to reset the monitor to factory defaults

  http://en.community.Dell.com/support-forums/peripherals/f/3529/p/18449274/18572260.aspx#18572260

  For more help, you can post your question in the Dell forum.

  http://en.community.Dell.com/support-forums/peripherals/f/3529.aspx

  I hope this helps.

• -What someone answering questions on Windows Media Player. I can't download a license for music. It gives me error 438.

  I have Windows Media Player 11

  Hello

  1 have had any changes made to your computer before this problem?

  Perform the following methods and check if it helps.

  Method 1:

  There is a possibility that internet settings are causing this error 438 to come.

  Go to your Internet Explorer and check the settings of Internet security. Make sure to set the level on 'medium high'. If the level is set higher, it can block the Windows Media Player to download the license, Windows Media Player error 438 to come.

  Also in the Internet security settings, it is important to "run activex controls and plug-ins." By activating these two parameters, it must deal with what caused the error to occur in Windows Media Player.

  Method 2: reset the DRM Bank on the computer.

  To do this, follow these steps:

  (a) If Windows Media Player is running, exit Windows Media Player.

  (b) locate the DRM folder on the hard disk, and then rename the folder to DRMbackup DRM.

  Note: by default, this folder is located in the following location in Windows:

  %SystemDrive%\ProgramData\Microsoft\Windows\DRM

  (c) visit the following Microsoft Web site:

  http://drmlicense.one.Microsoft.com/Indivsite/en/indivit.asp  

  (d) follow the instructions on the website to update the safety component of Windows Media Player. This procedure allows you to obtain new licenses for media content. You can also reset licenses for purchased content so that you can play that content on a computer.

  Note: DRMs, such as Microsoft Windows Product Activation, maintain an internal hardware ID. This ID is based on the hardware configuration that existed during the installation of Windows or installing Windows Media Player 11. If you change the processor of the computer or other devices, the hardware in the DRM system ID does not match the new computer configuration. When this occurs, DRM determines that a user has tried to move the content protected to a different computer. This behavior can also occur if the storage protected by DRM in the Windows registry has been changed.

  Note: you must contact any third-party stores where you purchased music to reset the licenses for that music. If you copied CDs for protected Windows Media Audio files, the CD must be copied again.

  For your reference: When you try to use Windows Media Player 11 to play a digital rights (DRM) - management protected, multimedia media can not play

  http://support.Microsoft.com/kb/925705

  Hope this information is useful.

• Purple tint on monitor

  I logged on my PC today and every thing has a weird purple tint to it.

  I didn't kno what to mess with, but if anyone has any clue to help me id much appreciate it.

  Hi, Donovan,.

  1. did you of recent changes on the computer?

  Method 1

  First of all, I would say that you reset the monitor settings that you would find in the menu of the monitor.

  Adjust the brightness and contrast of your monitor

  http://Windows.Microsoft.com/en-us/Windows-Vista/adjust-your-monitors-brightness-and-contrast

  Method 2

  Looks like that the display is damaged, I would say you connect another monitor to the computer and check if the problem persists.

  Method 3

  If the problem persists on the other computer and then change desktop theme and check if the problem persists.

  (a) open settings theme by clicking the Start button, clicking Control Panel, appearance and personalization, personalizationand then click theme.

  (b) under the theme, select the theme that you want, and then click OK.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.