Reset P - ram MacPro blocked - video urgent No.

Similar Questions

• something blocking videos

  I'm looking for advice set a Web site that does not display the videos for me. The site is sunnewsnetwork.ca. In my view, NoScript blocks videos but am not sure how to solve this problem. It is the only site that I can't at this time.

  Keep in mind that some of your other extensions, such as Adblock Edge, Ghostery and DoNotTrackMe, Bluhell Firewall can also affect how websites work, and not all sites are compatible with HTTPS everywhere. Isolate the specific culprit may take a long time and if you've enabled all the logical candidates in NoScript menu, I wouldn't invest too much time chasing after that one.

• How to dedicate more RAM to the video?

  Hello

  I have a HP Envy M6, m6-1225dx and I was wondering if/how I could devote more of my RAM for my video card.

  Thank you!

  Packels

  PS

  I am running Win8.1 and I have a 64-bit OS

  Hello

  Yes, he'll be upward and the use of AVAILABLE RAM. For example: it has spare 800 MB of RAM and video may require up to 1600 MB. He could not give 1600 MB, it can only give 800 MB max.

  Kind regards.

• Upgrade of RAM MacPro (end 2013)

  I have a MacPro renovated (end of 2013), and I'll update the RAM.  If I 2x16GB of RAM, does it matter which of the four slots I put them in?  And, is there an advantage to get 4x8Go instead of 2x16GB?  My thought is that if I get two sticks of 16 GB, I can always add two more down the road if I think that I need.

  Thank you

  Ed

  Yes, BUT:

  To date, 16GB DIMMS for these Macs is registered DIMM (they have an extra buffer registry on their products so that they will not overload the memory Bus).

  DIMM not Exchange and "friendly game with others. If you choose ANY DIMMs recorded, you will be forced to remove all DIMMS not saved to get everything working properly.

  The United States, OWC/MacSales has a program where they will allow you to sell a limited number of your old DIMMS for a little money when you buy them new.

  http://eShop.MacSales.com/tech_center/support/rebates/memory.cfm

  --------

  The traditional way of installing DIMMs has been to put the largest DIMMS in slots more small number. This Mac Pro (end of 2013 dark cylinder) requires no pairs, gets a slight edge of pairs in adjacent locations (i.e., 1 and 2 or 3 & 4), but the differential gap is very, very small and should not influence what you buy.

• Re: How to change the RAM for internal video on the Satellite A665-S5060 card?

  Hello

  My question is how can I change the RAM for my internal video card? I found I only 64 and I want to change it to 256.

  I don't want no heavy games, I just want to change to 256.
  I tried to change it by accessing the BIOS, but I had no luck with it, no option for this, another way, I could do?

  Thank you!.

  Hello

  > my question is how can I change the RAM for my internal video card? I found I only 64 and I want to change it to 256.

  No, you can not do it yourself. The system will automatically change to the need for more ram.

• Satellite A300-274 - I want to increase the RAM on the video card

  I would like to increase the capacity of my video card.
  I have a toshiba A300-274 co 4 GB of ram.

  Hello

  Your laptop uses 4 GB of RAM?
  Well, usually the graphics card chip supports memory video dedicated and shared system memory.
  The sum of dedicated video memory and shared system memory is the total video memory.
  The shared system memory depends on main memory.
  In your case it s 4 GB of RAM.

  The laptop seems to supports 4 GB RAM max and this means that the shared system memory can not be higher it s already on the highest level.

  In addition, you should know that you cannot assign all values manually everything runs automatically and is controlled by the graphics driver.

  Welcome them

• "IO Module\Reinitialize' IO NŒUD FPGA resets my memory default block (as defined on Project Explorer)

  I would like to reset my memory block to all zeros (only once) using the FPGA code. In my past experiences, it did not by the FPGA e/s 'IO done Module\Initialization' NŒUD.  To compensate for this, I used a SCTL that passes through each address of the memory block and stores a zero. The approach works fine, but I want to save space since we will quadruple the size of the code in a few months.

  FPGA: 7954r

  I/o module: 5761r

  Thanks for the research!

  

  Hey Denn_Mann,

  You should be able to set your memory to initialize to zero in the memory properties. Here is a link that should help you:

  http://zone.NI.com/reference/en-XX/help/371599G-01/lvfpgadialog/fpga_define_memory_db/

  Hope this Helps,

  Doug B

• Effect of RAM Preview finished video quality?

  Hello

  Few questions.

  If I consult my images in a half ram preview resolution, this will affect the quality 1080 p, I have defined composition like?

  The RAM Preview stops at about 10,000 images. I have a 18 minute video in 1080 p I make out. The ram preview doesn't make the whole thing. Is this a problem? What could I do?

  Thank you.

  RAM Preview has nothing to do with the output stream. If you have edited an 18 minute film in AE you do not use the software as it was designed. AE is for the creation of plans or short sequences. Most of my compositions are less than 10 seconds. A few are a minute or two of a sequence. Editing is done in an NLE. That's where I change my plans and sequences to complete the story. Try to change in AE is nuts.

  If you really need a preview any longer then you can skip frames or set a lower resolution of the model.

• 2014.0.1 update blocks video playback

  Since downloading the update of 2014.0.1 , my video playback will run for about 30 seconds and then systematically will freeze the right of the image before moving on to the next item. Audio continues to play in the next clip, while the frozen frame is on the screen.

  
  

  Yesterday, a member of the Adobe technical support team did the following:

  -increased le available in preview to 13 instead of 11 GB RAM

  -changed my Renderer to: Mercury Playback Engine Accelerator GPU (OpenCL) instead of mercury only playback software

  
  

  However, this did not prevent the problem from happening.

  Change the resolution in the monitor of playback of full, 1/2 or 1/4 does not solve the problem either.
  

  
  

  Everyone knows about this problem?  Any suggestions?

  
  

  Thank you.
  

  
  

  System Specs:

  Apple iMac 27 "(mid 2011)"

  Intel Core i7 3.4 GHz

  16 GB 1333 MHz DDR3

  AMD Radeon HD 6970 M 1024 MB

  (Local) 1 TB SATA drive

  4 TB Lacie Thunderbolt RAID (external)

  10.7.5 OSX (11G63b)

  Care about the software:

  Adobe Premiere Pro 2014.0.1 CC

  8.0.1 (version 21)

  Minimum system requirements  "Mac OS X v10.8 or v10.9.

• Mac Pro: more RAM or better video card for video editing?

  I'm going to buy a new Mac Pro for video editing in first Pro CC, but can't decide if I should ad more cores, more RAM or a better graphics card.

  Intend to change the RED 4 K files.

  Hello

  I'm certinaly not an engineer who can comment on how applications are written and how can hearts of processor they can write effectly, but there has been a lot of comments to the Mac Pro (new), and to answer your question, based on what I read, there were comments that the 8 basic model is good for video editing - not too , nor too little.

  Being an editor, I'd always put my money to get the best graphics cards and the largest amount of RAM that you can afford.  For work, we've been specing on new models and it was the 'formula' we follow.  With the exception of the RAM, sounds like once you buy, your clerks to the material with the new machines.

  I found the review below to be a great resource that can help answer your question.

  AnandTech | The Mac Pro Review (end 2013)

  Hope that helps and good luck with your purchase.

• Reset the size of the video

  Hello

  I use Adobe premiere elements 9.0; I just changed some video, picture in picture; but now I have problems because I want to resize in some parts of the video clip in full screen (such as the original size of the video). Is there a function to do this? I know that I can do this with the mouse, but is not the accuracy.

  Thank you

  You must click on the inscription of the query in the properties panel so that reset button to be available, John.

• How to make a reset button and add the action script to reset all my drag drop video clips

  It's HOT need help quickly by the close of business Thursday

  Hello kglad and all, I have a problem with adding a reset button for my drag and drop video clips.

  The problem is, if a student dragging a movie clip to a wrong address on the SWF, I want them to be able to hit a reset button that would lead the SWF even they opened and what would showup a page clear to restart drag them and drop exercise.

  I know how to make a button for this want just the appropriate action script to be able for the user to start over with no symbol of clip from movie on the page.

  Seal55

  You must either code to reset everything or you can reload your current page:

  loadMoveNum(this._url,0);

• Problem of Ram MacPro 1.1 a1186

  I just upgraded my old mac pro with 16 GB of RAM FB 1.1 a1186 but only 8 GB are recognized. I tried different combinations in two editing maps, but the result is always the same 8 gb.

  Aries is a Hynix 8 GB (2x4gb) 240-pin DDR2-667 PC2-5300F ECC fully Buffered CL5

  you have a total of 8 GB of RAM in this image, perhaps fully buffered RAM (5300F). You say ECC? If this isn't ECC may not be compatible, or voltage can be different or the RAM is just bad.

  OWC knows RAM Mac

  https://eShop.MacSales.com/shop/memory/Mac-Pro-memory#667-memory

• HP Mini 311 is blocking video playback on network

  I have a HP Mini 311 1000 - NR netbook running Windows 7 and it crashes into a video game on the network. It last a few seconds, the video locks, sound gets stuck, then he comes back and plays very well for a while. I should also note that when this happens the HARD drive led is solid, and the computer is completely insensitive.

  This happens when playing Standard and HD video of all formats, avi, mkv, etc...

  This occurs by ethernet and wireless. Ethernet is managed through a switch and bypasses the router.

  The same videos work very well when played on the local hard drive.

  After plugging the power cord makes no difference.

  Set the power plan to high performance makes no difference.

  I tried to play video files of multiple network shares on different PC with no changes, so it may not be a problem with the host computer.

  All the drivers and software are of course aware.

  I'm out of ideas.

  Uh, I said nothing about online games. Did you even read my ad?

  Anyway, I solved the problem. It turns out that the driver for the Nvidia SATA controller was the issue. Manual installation of the microsoft driver that some windows fixed my problem.

• Please help email account has been blocked need urgent help

  Hi my name is Maria and I'm writing this message on behalf of my brother who is at his wit's end, and between us two we are not computer savvy.

  My brother who's had enough of company for many years email has now blocked e-mail account (four days and more).  To date, which (to me) seems to be a generic Windows Live response is that he has been blocked due to SPAM, but my brother is adamant that there is no problem with spam until that account has been blocked without any notification.

  Long story short, we both tried to provide all the necessary details, but does not, he is also asked for more DETAILS of billing, we are the two suspects, because he never had to provide credit card details to set up the email now blocked account.

  Last generated Windows Live response was to create a new Windows Live account, get a new e-mail account, but we are not sure how he will get her first email account is not blocked, and having him full access to his e-mails.

  I was wondering is it possible for someone real to communicate with my brother or myself for a walk through how to unlock the account.  Any help would be greatly appreciated.

  Thank you

  Maria

  Hey Rocco Carnese,.

  Unfortunately we have no access to the account information or tools to be able to help you in the Microsoft Answers community. You will need to create a new question in the Windows Live Solution Center community so that the Windows Live team can help you:
  Windows Live Solution Center - forum Hotmail

  Once you open the link above, click on the link a question to create your own question.