reset the counter of iteration completion

Similar Questions

• How to reset the counter of DAQ

  I have a system such as X coordinates and Y and in moving my counter will increase, but when the system arrives in the precise coordinates, it must reset the counter (equal zero) that this will be the zero point.
  Attached is a picture to show how I read form pulse DAQ.

  Hi LVelozo,

  you really need to know how to use the shift registers.

  

• reset the counter - 6601

  Hello

  I use a Board 6601 and the C++ interface.

  My configuration:

  I'm counting permanently impulses, where I'm using a sample clock to get samples of each time the sample clock transitions from low to high.

  My problem:

  I would like to reset the meter every time the sample clock is down to the great transition, as I avoid all overhead (check the number of samples and by subtracting the previous current).

  I would be very grateful for some advice on this subject.

  see you soon

  Rolf N.

  Wouldn't be enough simply to define a measurement period task buffer?  You could designate the 5 kHz clock as a basis for your time and heart rate as a signal whose duration shall be measured.  You can set you care to respond to which edge of the heart rate signal, and the material would take care of resetting the number internally on each new benefit of heartbeat signal.  For an easier interpretation of the result, read the value of count U32 form and/or units value = "Ticks" in the configuration of the task.

  -Kevin P.

• reset the counter of pfi

  I read an encoder signals of pulse with the CAI (meter high speed) of labview and NI USB Daq 6009. So I tried to do it the easiest way, I found, by using the labview "component" (I don't know the exact name) of the attached photo. I account the impulses of wiring just a digital indicator on the port of outuput of 'data' of this 'element', and it seems to work perfectly. But my problem is when I try to reset this counter. I tried to connect a Boolean control at the port of entry 'stop' of this component and it worked when I click control Boolean true, but when I turn to false, it does not count the pulse more. It counts only the pulses again when I press the buttom game and press stop to run the VI again.

  The block that you use is an express vi, it will not certainly what you want, use discrete vi.

  You must initialize the acquisition of data outside of a while loop and then inside the loop States (Please search for state machine architecture) as count, pause, reset, stop, etc.

  You can modify this example and add States in for the while loop as a result. Also try the example finder, labview comes with plenty of examples for the daq hardware.

  I hope this helps.

• reset the counter

  I don't find a way to reset a counter of the M series to zero during its use as a simple event using LabVIEW and NOR-DAQmx counter.  I use a PXI-6229 and LabVIEW 8.5.1.  Can anyone suggest a way?

  Steve

  Here is an example if stop/restart the task is an acceptable solution.

• How to reset the counter at each iteration, and how to introduce a delay

  Hello world

  First of all I apologize for the basic level of my questions, I'm new with Labview...

  I'm counties of reading out of a USB-6008 labview chip using the DAQ assistant and I write the output to a file. The problem is that instead of giving me the number of levels for each iteration it gives me the sum of all this. How to make Wizard Reset to 0 data acquisition account on each iteration? I tried using a shift register, but it added a counter to my folder and nothing else...

  Thank you very much

  Sure thing. Sorry about that.

• I have to reset the charge cycle counter after replacing the battery?

  I had a defective power adapter, running on the number of cycles of load on my battery.  Thus, it no longer accepts a charge.  I have been running only on AC for over a year now, but finally decided to replace the battery.  What are the steps to reset the counter after replacing the battery?

  Replce just the battery, the battery will communicate the number of cycles to the computer. No adjustment is necessary.

• Reset play count

  After that the most recent iTunes updated, the ability to reset the counter to play songs seems to be missing.  Is there a way to reset the counter of my songs?

  Yes, I noticed it instantly.  Which is really annoying because I have all my smart list managed by game counties and sometimes to reset a track to keep it in a longer playlist.  There seems to be this old work around Doug I'll try, but I can't believe that Apple has removed this option.

  http://dougscripts.com/iTunes/scripts/SS.php?SP=newplayedcount

• Manually reset the VMID values

  I use ESXi 5.5.0 update 1, but in general it is relevant for all versions of ESXi.  My question is, how can you redefine the VMID value for a virtual machine or reset the counter so that new virtual machines will then leave to a lower number?  When you run:

  [root@esxcore01]:~-> vim - cmd vmsvc/getallvms]

  You get a list of virtual machines on the host and they all have a VMID associated with them.  Generally starting at 1 and counting upwards.  Whenever you delete a virtual computer and re-create, there is just the next value in the list.  In my case where I throw a large number of virtual machines for a short period of time and then delete them when I'm actually, numbers VMID can easily stand up hundreds or thousands very quickly.  What I would do without a CD re - install the host is to reset the VMID table.  The steps I would like to follow is something like:

  (1) delete all the virtual machines on the host or de-register all the virtual machines on the host.

  (2) change the right configuration file to reset the counter

  (3) create a new virtual machine or re - save a virtual machine and have it start the VMID 1.

  Has anyone understand what configuration files must be modified to make this happen?

  What I found is: [root@esxcore01]: /etc/vmware/hostd/vmInventory.xml contains a list of all the VMS registered on the host computer, but he calls VMID < objID >.  The < objID > is also at: [root@esxcore01]: /etc/vmware/hostd/pools.xml

  There is no other reference to that in the configuration of the system.  So unless there is a database file that is in there, I don't know where to look. Y at - it a command that can reset the value?

  I found a way to reset the counter that is currently used.  For example, say you have 4 guests:

  Server 1 = VMID 1

  Server 2 = VMID 2

  Server 3 = VMID 11

  Server 4 = VMID 20

  If you remove the 3 and 4 of your inventory server, shut down the server 1 and 2 and then restart the ESX Server, the VMID table resets.  So once the ESX Server host / back to the top, you can add the 3 and 4 to the inventory server and they will VMID 3 and 4 VMID respectfully.

• How to reset the number of Badge Application AS3

  Hello

  I sent a notification of transmission of Apple successfully using a native extension for adobe air by anders-tbl. The notification simply affects the badge number 1 and has a little message.

  What confuses me, is how to reset this count badge once that a user opens my request again or opens the application by clicking the notification? Badge County remains at 1, even if I delete the app and reinstall, it's still there! ??

  I know that I can reset the counter of the badge by sending a notification with badge = 0, but I can't do so by sending a blank APN with badge set to 0 you get only the device of chips on the first application load dynamically? Surely, you set this via a kind of AS3 function? I can't seem to find any help search google at all.

  If anyone knows or can push me in the right direction on how you are supposed to do this it would be great.

  See you soon,.

  Push notifications don't are currently not supported in the AIR. I mean there is no public API Actionscript to activate the Push Notifications in the AIR on any platform. There therefore no ActionScript API to reset the batch either number(for iOS). Since you are using native extensions, you will only have to rely on them to provide you with the number.

• How to reset the data counter without resetting the phone

  How to reset the data counter each month so that I can control my data counter with our reset the phone (or) without using factory data reset.

  Thanks for the reply much appreciated.

  Parameters

  Data Manager

  Press the lower left key

  Reset the data counter

• BlackBerry Smartphones need help with resetting the voice message counter

  Recently, I moved the United States in India and brought with me my favorite Storm 9530. In the United States, I had Verizon as my career and I went to Vodafone in India. Prior to joining Vodafone, he had 5 posts not read/unheard voices and so my Storm showed o_o 5 on the home screen. After that I went to Vodafone, this count is reset. I tried all over the web for a solution to remove this notification of my camera, but can't find a viable solution. According to my understanding, I thought that the count resets automatically once I have activate my voicemail to Vodafone, but after I signed, I realized that the Vodafone India use no method of "Notification of device" for voice messages, but sends an SMS whenever you have a virtual machine. With this result, the number of old was put in my camera never gets reset or reset.

  Y at - there someone who can give me a solution for this reset? Is there a way/software that will let me access the device's internal data structures and reset. My carrier, Vodafone India already has informed me that they cannot help me with this.

  Thanks in advance.

  The solution does not work. The only thing you need to keep in mind is to first take a full backup of the device via Device Manager and wiping the device, DO NOT remove the third-party applications.

  I had to reinstall all applications that a lot of time.

• How to completely reset the touch Journ.E?

  is it possible to give to zero DAY. E TOUCH, such that she has been in the sale
  or can be rearranged the system

  To reset the day you must turn off the trip and put the "Reset" on the left then right again.

• Why I get this trying to empty the Trash: the operation cannot be completed because the item "IMG_0645.jpg" is in use

  After selecting and dragging some photos of Photo on the desk I have their attached to an e-mail and sent them to the coast. Then I selected the 5 photos on the desktop and put them in the trash. When I tried to empty the trash later I received the following message: the operation cannot be completed because the item "IMG_0645.jpg" is in use.

  Aren't these photos on the desktop 'copies' of the originals in the Photo?

  All wise users out there with an answer?

  stop, disconnect all external devices

  Restart your computer in safe mode

  Try safe mode if your Mac does not end commissioning - Apple Support

  empty the trash after checking the files in there are of no use to you

  arrested again

  Reconnect the external devices

  reset.

• Reset the network settings

  My network connection to internet is good.  But the MacBook can't connect. How do you reset the network settings.

  Follow the instructions in this thread How to reset network settings completely a Mac?