reset the date and time on Photosmart all-in - One 7510 C311a

Similar Questions

• Need to reset the date and time

  My system has decided that it is Jan.4th 2004 and everytime I turn it on, I need to reset the date and time. How can I cure this?

  Packard Bell's Web site does not recognize the 'ALT' CO2 as a model.  Despite this, however, PB seems only to provide a 'generic user guide"which is not described the replacement of the motherboard or the battery at all.  In fact, the only thing he has to say about batteries is be careful how get rid you of them.

  Your computer is a laptop or Desktop/Tower computer?

  If you have a desktop/Tower computer, you can look here--> http://www.uktsupport.co.uk/pb/mb/pbmb.htm and see if you can identify the motherboard used in your computer.

  However, if you have a desktop/Tower computer, the best thing to do is to unplug your computer from the network and, taking the precautions perfectly static electricity, open the box and inspect the motherboard yourself.

  A newish mother on the above site, http://www.uktsupport.co.uk/pb/mb/cosmos.htm, shows the battery on the center line vertical and more to the left.  It's just below the 3 PCI slots.  If you have something like that, a Visual inspection should be enough to see how to remove it.  The type of battery will be engraved on the top of the battery.  In the photo, it looks like a model CR-2032, but there are several models of battery on this size.  Battery CR-2032 (or equivalent) is available in almost every pharmacy chain in the United States as well as online and stores like Radio Shack.

  The page for an old motherboard, http://www.uktsupport.co.uk/pb/mb/450.htm, indicates that the battery is a '3.0V DC Lithium soldered to the motherboard"and if that were the case, it would probably be something that you wouldn't do yourself.  However, this thread is to think that all you have to do for this particular mobo is actually finding the right type of support plug-and - battery.

  If you have a laptop, things can get quite a bit more difficult.  If you can find a different model for your computer name, you may be able to find the manual here--> http://tim.id.au/laptops/packardbell/ , but some of these manuals can not explain clearly how to get to the CMOS battery.

• Application of F1 / reset the date and time

  OK could not hang out long so here my problem feel free to move it if you must.

  Hi everyone I'm new here and I'm looking for the answer to what should be a simple question, but I can't find the answer, anywhere, not even after much research on the internet.

  My problem.  I woke up in a constant demand press F1 at the start and I had to constantly reset the date and time. A friend told me that he knew the solution and he replaced the battery Cmos and during one period of time applications of F1 and the need to reset the date and time on start arrested. Then, after a few weeks the F1 ask on startup and delivery to reset the date and time again.

  The situation at the present time, is that I replaced battery comos with the same type and the F1 started queries rearrested again. But once again after a few weeks the demand of the f1 and the need to reset the date and the tooth is distributed.

  I wonder if my friend used the bad battery when he replaced everything first, can someone out there please tell me the correct Cmos battery number and size, I need to motherboard below.

  Acer Apaire E380-CB7L mother board HT 2000 MCP6PM - Re3v:1.0 AM A what is battery correct Cmos?

  I found my answer in a response to another thread. It seems that some how the bad battery had been mounted and in my ignorance of this I still once mounted battery hurt it then compounded the problem further.

  It seems that the CMOS battery on the motherboard usually is a CR 2032 3V , I now nested together for my MB. I'll let you know if it works.

  BTW thanks to the person who advises I took on it.

• OfficeJet Pro 6835: Printer reset the date and time and other actions not initiated

  My printer (Officejet Pro 6835) turns on randomly and want to reset/confirm the date and time settings.  Sometimes even lights up and wants to resume a scan or fax that was never launched.  I want to stop this behavior.

  I didn't want to factory reset and did the thing turned off, etc..  Instead, I went into Setup and turned off the web services 'HP eprint' sign and "HP printable" I was sure that my reset requests were in response to certain functions attached to these.  This seems to have solved my problem.  Please send to HP if you can that their links with the web services are intrusive and therefore undesirable.

  T.

• OfficeJet 5745: Reset the date and time on Officejet 5745

  The time on my new Officejet 5745 is 7 hours before the actual time.  How to reset it?

  I touched the date/time display and could enter the erase mode.

• How to reset the date and time

  The year and the time is more correct then faxes be recorded accurately.  How to reset these?  It's my 8600 Officejet Pro.

  Thank you... it was driving me crazy and I couldn't find it on the indices to help HP.

• MSN Money portfolio cannot authenticate me. Tried to reset the date and time, off, connected and turn it back on. Nothing works. Help!

  When I try to go to my portfolio, I get a message box that says they can not "authenticate"me." I've visited the forums and tried everything. Any ideas?

  I'm having the same problem.

• Evrytime I connect me, I have to reset my date and time, why?

  Why my date and time do not be saved? Why should I reset each time my date and time?

  Hi NarendraNP.

  Here are three possibilities about why this is happening to you.
  1. The time in the BIOS is not set correctly. Therefore, every time that you start the PC the incorrect time is displayed. To correct, shut down the computer, turn it on and immediately go into the BIOS settings. Check that the date and time is defined, save and exit, then start the computer normally.
  2. The CMOS battery is dead and needs to be replaced. To fix, you have to expose the motherboard and replace the small type CR2032 on motherboard. You can find many videos on YouTube that will show you how to replace a motherboard CMOS battery.
  3. You don't have administrator rights to the computer to change the date and time, or there is a program installed on the computer that locks the system setting changes (an example of a program that does this is Faronics DeepFreeze). The only solution for this is to temporarily disable the program that is to lock the Control Panel, or ask a system administrator set the date and time for you.

  One of these explanations\fixes help it?

• How can I configure the printer on my Officejet 6500 a display more to the date and time?

  I replaced my wireless HP OfficeJet All In One printer 6400 with a 6500 has more wireless and want the default screen to have the date and time, just like my previous one. How am I able to do? I've set the date and time through preferences, but I want to be there when I turn on the printer.

  Hi Irvonne!

  Displays the date and time on the home screen of the 6500 a Plus isn't a feature of the unit is supported, I'm afraid.

  Thank you

• My HP Officejet 4630e all-in-one does not print the date and time on the fax header

  I followed all the instructions of configuration / Date and time are set correctly but only name and phone number show on the fax header when sending fax.  How can I get the date and time to print as well?

  Thank you for your help

  Hi doggynut4,

  Welcome to the HP Support forums.  I understand that you want to add the date and time to your fax header.

  Your user guide indicates that only the name and fax number can be entered for the fax header (found on page 49). I even confirmed this on my Officejet 4630.  I apologise for any inconvenience this may cause.

  User's Guide e-All-in-One Series Officejet 4630

• Problems with the date and time - have to reset the date & time on reboot

  original title: problems with the date and time

  Whenever I turn on my computer (Windows XP 2002) I click on F2.  Then I re - set the date and time it occurred in January 2006 1 h every time I have turn off the computer.  Can someone tell me what I need to do?

  You need to replace the battery in time clock (RTC) real of your computer.  It can also be called the CMOS or BIOS battery.

  Many computers, this battery is an inexpensive CR2032 button available in almost every pharmacy corner.  There are, however, some computers (especially laptops) that require a different (and probably more expensive) battery.

  Whatever the expense, almost all of these batteries are easy to replace.

  To get help, post back with the brand and model of your computer.

• Vista-the date and time are reset to dec 2007

  Whenever my computer load now, the date and time are reset to dec 2007 and I continue to have this change manually. I am owner of Acer - windows Vista purchased in 2008. Help, please!

  Hello

  This time is normally caused by a battery CMOS failed in the motherboard.

  Time/date settings are preserved after turning off the power when that battery works

  They are a piece of currency-sized battery and cost about $5 to buy.

  "How to replace the battery CMOS.

  http://www.computerhope.com/issues/ch000239.htm

  See you soon.

• Must DSL be connected all the time to the date and time of synchronization?

  Sometimes I disconnect my DSL lines in case of bad weather.  What's causing my date and time on the computer clock to stop?  I have not had this problem before and have disconnected the front DSL.  If this could have something to do with a switch recently to Security Essentials?

  Sometimes I disconnect my DSL lines in case of bad weather.  What's causing my date and time on the computer clock to stop?  I have not had this problem before and have disconnected the front DSL.  If this could have something to do with a switch recently to Security Essentials?

  Disconnect it won't cause the date and time to stop, but it will not synchronize the period that it is disconnected.

  In addition, please note that diconnecting just the telephone line during bad weather is not enough. If you want to protect you during storms (other types of weather do not require protection), you should unplug both the phone line * and * power cord. Be possible to route a severe surge suddenly lightning nearby for your computer

• I want the date and time to stop printing on the bottom of my print outs

  The date and time printed at the bottom of print all. It doesn't matter if it's Firefox, IE, my emails, or even a word document. I tried to remove the header/footer, but because it prints on everything and everything I print, I think it might be a desktop definition...? I am running Windows 7. Help, please.

  Can go you to your devices and printers on your Start Menu and check your settings in your printer? You're right, it could simply be that a bizarre is activated he forced a timestamp on all your printing.

• Automatically set to the Date and time does not

  Date and time settings on my iPad Air set them automatically does not work? When I turn it out it will allow me to choose a city (Knoxville).

  When I turn it on with (location settings) it just turns and turns?

  Any ideas?

  Hello and welcome to Apple Support communities,

  This problem may be caused by a number of things, most often the cause is the device not being able to contact the time server. Here are the instructions from Apple supported for this problem, as well as a link to the appropriate article.

  Follow these steps, after each step:

  1. Make sure you have the latest version of iOS.
  2. Automatically turn on set in settings > general > Date & time. This will automatically put your date and time based on your time zone.
  3. Make sure that your time zone is set correctly. Tap Settings > general > Date & time > time zone.

  If you still have any questions affecting your date, time, or time zone, you can automatically disable in the settings > general > Date & time and manually set the time and time zone. Or contact your carrier.

  The option to enable the value automatically may not be available in all countries or all shells.

  If the time on your iOS device does not go after a sync with your computer, the computer may be time wrong. Check the time on your computer in system preferences > Date & time. You can select "Set date and time automatically."

  Support the Article HT203483

  Get help with the date and time on your iPhone, iPad and iPod touch - Apple Support

  Of course, if the time of your carrier server cannot connect the other option is to manually set the date and time until the carrier server are again available.

  Hope you helps out.

  Kind regards

  Peter.