Reset the default value does not

Similar Questions

• Linksys E2100 - reset to the default values does not

  Hi, I just bought a used E2100 auction sale, when I plug it I see an 'unnamed' network with lots of bars wireless, but cannot connect because I don't know the ssid and password

  Connecting cable with ipconfig, I get a 10.10.10.108 ip, the bridge is 10.10.10.99. Yet I also can't access.

  I tried the reset down, button for more than one minute, pushing quickly, holding for 30 seconds, holding and the fact unplugging + reconnected the router, but nothing helped.

  I also tried the CD that accompanies it with cable and wifi only, but it does not find the router. I deleted my network wireless by default settings, had my wifi on, was not connected to any network, but the CD did could not find the router.

  When the router is enabled, the WIFI led flashes around once per second, while the LAN led flashes randomly as it should.

  I was wondering if there is anything else I can do?

  Thank you.

  He has no doubt DD - WRT or some other third-party firmware on this subject and they disabled the reset button.

  You can try combinations of username/password of root/admin name.

  Most likely, you will need to find another router. I hope that you do too much for her at the auction. You can buy a router from linksys refurb really cheap out of the home Bank. More safe too.

  Edit: E4200v1 supports the third-party firmware and is probably a better router than the E2100L. The E4200v2 does not support third-party firmware.

• How to reset the default values for the import of images

  With the help of Windows 8. file import settings have been changed for a tag, which was a mistake.  I can't change the import settings because the import happens too fast for me to get click on that link the import settings.  Is there a way to reset the default values to their original settings, so I can get things organized again?

  If it isn't a recent phenomenon then try to fix things via the system restore.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (7 or 8).
  http://support.Microsoft.com/kb/936212/#appliesTo

  See, control Panel\All Control Panel Items\Recovery\ Open System Restore

  Change the settings for importing pictures and videos
  http://Windows.Microsoft.com/en-AU/Windows7/change-settings-for-importing-pictures-and-videos

  See control Panel\All Control Panel Items\AutoPlay, maybe you can click on 'Reset all default settings'?

• Reset the default value at the close of the program

  Hi guys,.

  I should work on the main piece of my program, I think practical features for the user.

  A feature is to have the user entered by default the current value at the close.

  For example, in my situation, the user must specify the multiple instruments GPIB address.

  After that program has been executed and completed, the default values will be replaced by current address of GPIB

  like the GPIB addresses of the equipment will probably not change.

  I noticed the function of 'The VISA resource name'->-> use current default value of data operations.

  Is there a programmical way to change this?

  Thank you

  William

  You cannot change the default values of a VI running.  Instead, write the data to a configuration file to the fence. When the program opens, read the config file and set the values for what is in the file.

  Lynn

• Default value does not appear is not for OAMessageTextInputBean

  Hi friends,

  I'm trying the earned on the OAMessageTextInputBean default. I also debugging messages in the central and this shows that the new value is used. BU that this value is not displayed in the field. However when I click on the page to customize and then return to the page by clicking the back to demand I am able to see the value. This position is similar to the next station.

  https://community.Oracle.com/message/9133380

  The message by the creator of the post says that "I called setForwardURLToCurrentPage() first and in the processRequest, I used setText().". I tried this but it does not work. Can someone please. Here's the code.

  Thanks in advance

  package xxalm.oracle.apps.ar.hz.components.address.webui;

  import com.sun.java.util.collections.HashMap;
  import java.io.Serializable;
  import java.util.Hashtable;
  import java.util.Vector;
  Import oracle.apps.ar.hz.components.base.webui.HzPuiBaseCO;
  Import oracle.apps.ar.hz.components.util.webui.HzPuiWebuiUtil;
  Import oracle.apps.fnd.common.MessageToken;
  Import oracle.apps.fnd.common.VersionInfo;
  Import oracle.apps.fnd.framework.OAApplicationModule;
  Import oracle.apps.fnd.framework.OAException;
  Import oracle.apps.fnd.framework.server.OADBTransaction;
  Oracle.apps.fnd.framework.webui import. *;
  Import oracle.apps.fnd.framework.webui.beans.OADescriptiveFlexBean;
  Import oracle.apps.fnd.framework.webui.beans.OAWebBean;
  Import oracle.apps.fnd.framework.webui.beans.form.OAFormValueBean;
  Import oracle.apps.fnd.framework.webui.beans.layout.OAMessageComponentLayoutBean;
  Oracle.apps.fnd.framework.webui.beans.message import. *;
  Import oracle.apps.fnd.framework.webui.beans.message.OAMessageTextInputBean;
  Import oracle.apps.fnd.framework.webui.beans.table.OATableBean;
  Import oracle.jbo.common.Diagnostic;
  Import oracle.jbo.domain.Number;
  Import oracle.apps.ar.hz.components.address.webui.HzPuiAddressCreateUpdateCO;
  Import oracle.apps.fnd.framework.OAException;
  Import oracle.apps.fnd.framework.webui.OAWebBeanConstants;

  SerializableAttribute public class XXHzPuiAddressCreateUpdateCO extends HzPuiAddressCreateUpdateCO
  {
  public XXHzPuiAddressCreateUpdateCO() {}

  ' public void processRequest (OAPageContext oapagecontext, OAWebBean oawebbean) {}
  super.processRequest (oapagecontext, oawebbean);
  oapagecontext.writeDiagnostics (this, ' in processRequest", 2);
  OAMessageTextInputBean add2Bean = (OAMessageTextInputBean) oawebbean.findChildRecursive ("HzAddressStyleFlex2");
  If (add2Bean! = null) {}
  add2Bean.setRequired ("Yes");
  add2Bean.SetValue (oapagecontext, "HI");
  oapagecontext.writeDiagnostics (this, 'in' add2, 2);
  }
  OAMessageTextInputBean add3Bean = (OAMessageTextInputBean) oawebbean.findChildRecursive ("HzAddressStyleFlex3");
  If (add3Bean! = null) {}
  add3Bean.setRequired ("Yes");
  }
  oapagecontext.setForwardURLToCurrentPage (null, true, OAWebBeanConstants.ADD_BREAD_CRUMB_NO, OAWebBeanConstants.IGNORE_MESSAGES);
  oapagecontext.setForwardURLToCurrentPage (null, true, OAWebBeanConstants.ADD_BREAD_CRUMB_NO, OAWebBeanConstants.IGNORE_MESSAGES);
  }
  ' Public Sub processFormRequest (OAPageContext oapagecontext, OAWebBean oawebbean) {}
  super.processFormRequest (oapagecontext, oawebbean);
  }
  }

  Jaya Hey,

  This is resolved. I used the setText and it worked. But a question

  Based on the different approach if it's a VO field and field control

  Thank you

• I can't print from powerpoint, excel, adobe reader software. Selection of the default printer does not stick

  Lenovo thinkpad T410s, stock, windows 7 64, ms office 2007, adobe reader, all day

  Cannot print to a PictBridge compatible printer (including print them as pdf, xps, etc.) of powerpoint, excel and adobe (at least). This is what happens when I try to print:
  -excel, I get the error "current printer is unavailable". When I say ok, it appears a box displays the available printers (updated from the printer list and shows new printers if I install, removes those I removed/uninstalled), but I chose one, say ok and it just goes back to the same error
  -powerpoint: I get the error "no printer is installed.
  -Word: printing, but it does not show a default printer (drop initially empty). the list of printers (once that you pull-down) remains up-to-date
  -adobe reader software: poster old printer printer list and the default is not updated. When I select and press on print, it gives error ('no page selected')

  I have read that sometimes happens when there is no default printer selected. It's true. I select a default printer, but it doesn't seem to stick. When I run the troubleshooter to fix - it, he confirmed that he could not set default printer (and then gave me some unnecessary insulting suggestions, like going to the site of the printer manufacturer, or fix - it)

  I uninstalled reinstalled all printer drivers except the default virtual printers (printing of the document, ms fax, pdf etc.). I checked that the spooler is running (in services)

  What can I do to recover the printing feature?

  It seems as if it was a corrupt user profile. In the new user profile things seem to work. Thank you. Still a lot of work just to work in the new profile, but not quite as bad as from scratch

• The Matte value does not

  I have a composition including background aerial video images, of the chassis of the video overlay of 3d rendering.  I hit framed a png of a tree that moves and can change with an existing tree.  I want to use the tree view of the png as an object remove (erase) the sequence of 3d rendering and expose the original tree that is in the air video.  I added the effect mat set to rendered 3d layer and chose the tree png as the object of 'take the mast of layer', but it does not work.  I tried all the options of the effect, and nothing seems to work.  Any suggestions?

  Before dialing the hidden layers and scale. AE has a specific rendering order and as the program is concerned, he cannot see your changes using your current method.

  Mylenium

• Dynamic action - check if the size of the texfield values does not exceed limit

  Hello
  
  I have a form and I'm trying to use dynamic Action to process the form values. I don't know how to get the length of the value of a textfield and compare to what I said in the values
  
  The order of the day called P6_USERNAME which can be more than 10 characters long.
  
  So I tried to create a dynamic Action with the following parameters in the region when .
  
  EVENT: Press button
  SELECTION TYPE: jQuery Selector
  jQuery SELECTOR: $("P6_USERNAME").val () .length
  CONDITION: above
  VALUE: 10
  
  Of ACTION GENUINE, I had a view only showing a message "you have exceeded the limit.
  
  The above didn't work and tried to work it around with:
  
  $v("P6_USERNAME").val () .length
  
  that no longer works.
  
  Any suggestions on how I can achieve this? The only options I got in the Type of selection are: point, area, object DOM and jQuery Selector. What I'm really after is retrieving the value of the element, so I can use it for comparison with the value to run my Real Action
  
  APEX 4.0 - Oracle XE 11 G - Windows 7 32 bit

  It is not necessary to use a validation/dynamic action. Set the maximum width for the element attribute and the browser will prevent users to enter values longer than that.

• ChoiceField default value does not match the visible value

  I'm creating an ObjectChoiceField and have noticed a strange behavior.

  As soon as the application loads I see that choice at index 0 is the selected choice. However, if I call mychoice.getSelectedIndex () returns 1. I even tried to call this.setSelectedIndex (0) in the constructor, but it remains 1. If anyone has experienced this?

  NVM. freakin ' getIndex/getSelectedIndex are too similar!

• Reset the default values of properties of Vista user

  1. Properties of Windows Vista have been corrupted by the installation of a model of MS to MS Word. Which is more easy/quick way to reset all of the values property to create a model of usable user properties / work to replace all the user files that seem to vary in properties?
  2. How to best proceed to standardize all users would be also appreciated!
  original title: default property values for Vista user

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• APP-FND-00806: the default value is not valid for the p_period_from segment

  We get this error when a user selects a date that is two years of one of our custom reports. I am fairly new to value sets, so I'm not sure what to include here. The parameter on which the problem has a custom value game which is a list of standard date format type values, but there is no validation of value.
  
  I have watched a few other items of metalink but have not yet find something that could solve this problem.

  Have you reviewed these docs?

  R12 - Standard presentation on how error - APP-FND-00806 the value xxxxxxis default invalid segment. ledger_id [815823.1 ID]
  "APP-FND-00806' error executing create accounting to the custom help responsibility [ID 1300931.1] program."
  Create accounting assets cannot be run from custom responsibilities [ID 1257416.1]
  Create accountants Fail with error APP-FND-00806 [ID 1189102.1]
  Impossible to run some reports of responsibility related to the custom Application APP-FND-00806 [ID 1436456.1]

  Thank you
  Hussein

• I have a problem in direct charge of path where the default values are not met when using the CSV file to load into the database while his is filled everything in plain insert queries

  -The header of the control file, I added a load direct method(append mode)

  OPTIONS(direct=true,Parallel=true,skip_index_maintenance=true,skip_unusable_indexes=true)

  DATA RELATING TO SUNK COSTS

  ADD

  INSERT INTO TEST_TBL

  (

  col1,

  ...

  Col n-2

  );

  Try to use the classic path instead.  With the direct path, many constraints and triggers, and others are disabled.  Please see the next section of the online documentation.

  https://docs.Oracle.com/database/121/Sutil/GUID-973925DA-8F86-49C1-A707-4564DC3B57AE.htm#SUTIL1330

• default value is not taken

  When I use the default keyword, it should take values by default if the value inserts are omitted.
  SQL > create table ee (eno number hire_date, date default sysdate)
  2.
  
  Table created.
  
  SQL > insert into ee values(101,null);
  
  1 line of creation.
  
  SQL > commit;
  
  Validation complete.
  
  SQL > select * EA;
  
  ENO HIRE_DATE
  ---------- ---------
  101
  The default value is not taken...
  Why the statement fails... ?

  SQL>  insert into ee(eno)values(101);
  
  1 ligne créée.
  
  SQL> select * from ee;
  
         ENO HIRE_DATE
  ---------- ----------
         101 2009-03-11
  
  SQL> insert into ee values(102,null);
  
  1 ligne créée.
  
  SQL>  select * from ee;
  
         ENO HIRE_DATE
  ---------- ----------
         101 2009-03-11
         102
  
  SQL> 
  

• Change the default value for new messages of the 'paragraph' in "text" format the answer currently online because it does not work

  The answer currently online for this problem said to follow the sequence "tools-options-composition" and then change the default value, but this sequence "tools-options-composition" does not exist in Thunderbird (at least in the version I have, 45.4.0). Under 'tools', there is no option 'options... '

  It can depend on what menu you look and which operating system you are using.

  Tools | Options | Composition refers to the menu bar on top old.

  You can use alt or F10 to make the menu appear temporarily. Go to the view of . Toolbars and check the boxes if you want it constantly on the show.

  If you use the button 'Menu of the Application' new fashion (with three horizontal lines - see the attached picture) then it's probably Options | Options | Composition -I say 'probably' because I'm on Linux where 'Options' are replaced, I think that, by "Preferences". Another complication with this infernal Application Menu is that different things happen depending on whether you click or hover. Place the cursor on the Options of the first and the second appears after some time.

  See http://kb.mozillazine.org/Menu_differences_in_Windows, _Linux, _and_Mac of the differences in Windows, Mac and Linux menus.

• If the default value in columns on slot form of table does not work.

  Hello
  
  I created a tabular form and I want to set some default values to columns that are based on the values of page elements.
  
  so I put the page element to the value of the column in the attributes in a table by selecting the value & P24_ISSUE_ID. default type as Expression PLSQL & DEFAULT function there but
  in the same way, I tried for the other column by selecting the type default as pl/sql expression and function by default the value & P24_CASE_NAME.
  
  but it throw an error of this type could not parse the SQL query: ORA-00904: "C254DB": invalid identifier
  
  I don't understand where I did wrong, I checked for the data types of columns, all right.
  
  so please help me out of this problem.

  1243 Tulasi wrote:
  for the first column

  I chose
  The DEFAULT TYPE as PL/SQL Expression & FUNCTION

  As the default * & P24_ISSUE_ID.* it is a number data type column

  2nd column

  The default Type as PL/SQL Expression & function

  As the default * & P24_CASE_NAME.* it's column of type Varchar2.

  Element (name of the page element or application) for the default Type and the name of the default item ( P24_ISSUE_ID, P24_CASE_NAME etc.) options appropriate for a default value for a page element.

  * & P24_ISSUE_ID.* is not a "PL/SQL Expression or function.

  but it throws an error, because this guy could not parse the SQL query: ORA-00904: "C254DB": invalid identifier

  What you're doing results in the engine of the APEX, P24_CASE_NAME 'C254DB' value in the default value and then try to assess this string as a piece of PL/SQL. Outside a block in which it is defined as a variable, constant, or a function 'C254DB' is not a valid expression of PL/SQL.