reset the ftp labview 2011

Hi, I was working with LabVIEW 2010 and I have programmed a VI to transfer a file and check containing the path remote, everything was fine. Now, I've changed to LabVIEW 2011 and I can't find the function "reset ftp" and my VI no longer works. I'm not sure of the origin of my problem, I guess that it is not working because I do not have anything to reset the conection or if I need to use the other function to fix this.

I have programmed a new LabVIEW VI 2011 without the function "reset ftp" and it does not work in any case.

I hope you can help me.

Hi Eric_NI, I solved my problem. I checked the block diagram of the "get file" function and I found the correct way to implement FTP. Also, I use 'active = False' for all the functions that have the "active" option

Tags: NI Software

Similar Questions

  • Problem installing module time real LabVIEW 2011 SP1

    Hi, I'm new here. I have a problem when I tried to install LabVIEW Real - Time 2011 SP1. Whenever the part of initialization, this message appears: "NEITHER Labview 2011 SP1 32-nit must be installed before installing the OR labview 2011 SP1 real-time Module.» I'm sure that I've already installed Labview 2011 32-bit SP1 and it works well. I use a Windows7 OS and also have Labview 2010 and an older version of Labview 2010 RT module installed. I didn't remove the old version of the software, and I don't know if it is related to this problem.

    Can anyone help? Thank you in advance!

    MrSun87 wrote:

    ... I'm sure that I've already installed Labview 2011 32-bit SP1 and it works well...

    Can post you a screenshot of MAX where are installed Versions of LabVIEW?

    Christian

  • Where can I download LabView 2011?

    Hi all

    Some time ago I bought the student LabView 2011 online edition, so I have a serial number and registration key.

    Now, I have reinstalled Windows and noticed that I don't have the software anywhere (I admit, it was not very smart).

    Anyone know where to download this version of LabView?

    Best regards and many thanks

    Please note that you must be logged in with your profile account NOR (see screenshot) to see all software downloads!

    You can create a profile OR free there too.

    Best

    SUSE

  • How to reset the SMC on mid 2011 mini

    Do I have to remove the battery to reset the SMC on a mini mid 2011?

    Thank you

    John

    N ° see:

    MacIntel: Reset of the controller (SMC) system management

  • LabVIEW 2011 compiled the application crash

    I'm writing an application DAQ simple enough to use in a freshman Engineering Lab is written to the USB-6211. Since it will be used at more than one campus, I try to make a compiled application. Demand, such as built in LabVIEW 2011, works very well. The problem is that the compiled executable hangs in the same places without fail. I've included the source VI unmodified and a version with the acquisition of data code disabled and some dialogue inserted to track the progress of the request. Executables for both are also included.

    I use a architecture of producer/consumer-events to manage the three tasks of data acquisition. Consumers loop will fail after one of the three DAQ events are executed. Consumers loop works very well for the exit event. I also returned to LabVIEW 2010 and recompiled, the same failures.

    Any help is greatly appreciated!

    Stuart

    I think that if you close the front panel to start the VI, it will leave the built application.

    Replace the properies "FP.open" with "FP." State"and toggle between 'Hidden' and 'Normal'. That seems to work in my limited testing.

  • Problem with the configuration to use Silver Style with labview 2011 (32-bit)

    Hi my friends.

    I installed labview 2011 32 bits. I select money style my default control style. but when I create the new VI, labview creates no controls in the silver model

    the controls are created in modern style.

    can someone help me solve this problem?

    with all my thanks: Saeid

    If you're down by controls via the palette, then it will drop any type palette you are in.  You are most likely in the range of modern control.  The setting that you are talking about is when you create a command or the indicator by right-clicking on a primitive terminal.

  • Need help to make the adjustments to TCP between Labview 2011 and webrelay

    Hello

    I'm using Labview 2011 and trying to establish communication with webrelay (X-WR-4R1-l) to control its relay.

    I downloaded a www.ni.com example but it does not work.  (he was tied with this thread as well)

    I did no changes in the example program, that I do not really understand much codes XML.

    I turned ON all 4 relays this webrelay, but in labview, it reads that the relays are turned OFF.

    and when I click the button on the front panel, it does nothing.

    There are several toolkits labview installed in my PC, namely:

    -labview development system

    -application builder

    -recording of data and control module

    -Database connectivity kit

    -internet Toolbox

    -report generation toolkit for Microsoft office

    I'd appreciate it if someone could guide me in this configuration process.

    Thank you

    OK, we're making progress...

    Something seems truncated. Is there something after realy4state in the received string? Because the string is longer, you will need to adjust the number of bytes read. It's more than the 157, which corresponds to the current setting.

    In all cases, their example LabVIEW is a unique feature of relay. You need to look at section 3.2 of the manual that you set for the correct orders. Now there is always a number between 'relay' and 'State' for example:

    1State = 1 for relay activate relay 1.

    You must do two things:

    Write a trainer who composed the correct channels based on the selected relay.

    Write a parser that retrieves the status of all four relays relay. (the offsets will be different, for example)

    I recommend you to treat the four relays as an array of four Boolean values.

  • LabVIEW 2011 f2 [x 64]: no drop-down menu of "Targets" in the "Getting Started" window

    Is this normal? I don't remember if selection "Targets" was there at the start, but it isn't here now! I installed the Module, the Module 2011 WSN 2011 Vision and ARM 2011 Module and their icons appear on the startup initialization screen, although there is no ARM Module screws present in the ADE.

    If it's a bug, what should I do to fix?

    Thanks in advance,

    I guess as 64-bit LabVIEW 2011 is not compatible with these modules, they will not fill the list started with targets.  If they appear correctly in 32-bit LabVIEW 2011, it is most likely the problem.

    Brian

  • How to empty the group clear chart history labview 2011

    Hello

    Can someone help me?

    How to clear history of cluster diagram data using labview 2011

    Hi qbell,

    the example is suitable for any type of graph. Just wire a table empty clusters or, even easier, create a constant to your graphic story property node.

  • LabView 2011 Application launched as COM server via the Application Delphi lance is more if installed under 64 bit, Win 7

    I have a 32-bit LabView Application written using LabView 2011, that installs and registers as a COM Active X server.  I then used the resulting type library with a 32-bit Delphi Application to launch and communicate with the LabVIEW application (Boolean change States and collect data etc.).

    All this worked fine on Windows 7 32 - bit OS but not on Windows 7 64 - bit OS.

    The LabView application seems to work on its own, The Delphi launch application will not launch it?

    I used mmc comexp.msc 32 to set up the COM server to run as servers with launch of site privileges.

    Hi Luke,.

    Thanks a lot for your answer.  I have just managed on the basis of track down the problem almost at the same time, your answer came through.

    My Delphi application is also a COM server, allowing me to start it remotely from another system.  What I forgot, it was that the remote system makes the connection to the LabView Application otherwise the local application of Delphi just is there and does nothing.  I did it it as a work-around a few years ago because I could not the remote application of Delphi to launch the labview application or attaches to it as a running instance directly.

    Thanks again

  • How to run the VI developed in labVIEW 2011 in its previous versions

    Hi all

    I am currently using LabVIEW 2011 in my PC at home.

    But, all my school's computers are installed with LabVIEW 2010 and 2010 SP1.

    How to run the VI developed in LabVIEW 2011 in its previous versions?

    Is there any conveter why?

    Concerning

    Prasanth T

    Open the VI in LabVIEW 2011 and use the file menu option, save for the previous Version.

  • Install the engine 6.1 enforcement (or compatible) labview with the labview 2011

    I installed a Labveiw 2011 trial version in order to check for potential problems to upgrade, I get if I decide to spend labveiw 6.1. Well, needless to say, there has been a lot. This is as expected because I have not updated labview for many years. I'm still not under any pressure to update; However, I want to in order to get help and make sure that I have no problem of compatibility with new equipment purchases. I was able to solve most of my problems of compatibility with code simple and other corrections. However, twice now I ran into an error at the launch of labview executeables compiled by two different manufacturers. The equipment I use is not yet old... maybe a year or two. When I run labview executables for the device on a PC that has the trial period 2011 installed labview under control, I get an error message saying something like "this requires a motor enforcement 6.1 (or compatible) of Labview. I tried to download and install the labivew engine 6.1 but I can't install this engine on a PC that has labview installed 2011. Can someone explain how I run these executables under labview 2011. I can't imagine that these executables were developed using 6.1 as this equipment is not yet a year old now.

    You should be able to have a number any time installed and 2011. I have several versions back to 7.0. I asked what exactly happens when you try to install it.

    Have you tried 2011 withdrawal, execution 6.1 installation and then installation of 2011?

  • get the message "setup.exe has stopped working" when trying to install labview 2011 or 2012 on a windows machine 7

    When you try to install labview 2011 or 2012 on a windows machine 7, I get a message "setup.exe has stopped working". I tried to run setup.exe as an administrator with the same results. I have Microsoft .NET Framework installed on the affected machine 4.5.1. Could be the cause of this problem? Or does anyone know the root cause of this error?

    Hi - are you getting it at the beginning of installation, during or after 100% progression ended?

    Is it fair to LabVIEW you install, or is it drivers too, in this case, what was the last big package that has been installed at the time?

    This can be caused by the NVIDIA chipset driver:

    https://decibel.NI.com/content/message/46299?TSTART=-130

    Thank you
    Sacha

  • NOR-845 x driver Labview 2011 SP1

    Hi all

    I faced problem,

    I have a LabView program that is used to communicate with devices SPI-NOR-8451. Program worked perfectly, on PC with LabView 2010. After that, I moved the program to new PC where f1 LabView 2011 SP1 has been installed. And now, I am not able even open - LabView program stuck on the white block diagram (not responding).

    Program is complex and includes 10 ~ SubVis, which is packaged in the .llb file. I tried different things - to decompress from .llb, or run subVis themselves - for all the subVis, which include a part any communication NOR-8451, I've got stuck LabView. In addition, after the removal of NOR-845 x pilot, I can't ignore everything and load the program successfully, with '? ' instead of screws of NOR-845 x pallete.

    In addition, when I'am tring from white VI and set NEITHER-845 x ref Device link (see attachment for details Link_on_ref_.jpg) on the block diagram, I'm LabView stuck - see the attached Stuck_.jpg.

    I use NEITHER-845 x driver 2.0, I tried to reinstall several times.

    So, it's my suspicious that NEITHER-845 x driver 2.0 does not work for LabView f1 2011 SP1 - is it possible? Or maybe I'm doing something wrong?

    Hi RangerOne,

    Thanks for the trace, as LabVIEW is suspended, it is what I expected but hoped a different error code. If you could go to MAX and reset Configuration data, and then create a MAX Technical report and attach it.

    If you open the test Panel, you run a query, it works or hang? Try to run a trace when you try to query.

    I see the same error with the camera on my machine under interrupt in Pipe status is not abnormal.

    I also noticed that your computer input for findlist, retcount and SrcName parameters have not the & on the non-working paper. I will continue to examine the reason why the & is not there and if it has an effect on the shot.

    DylanC

  • By the end of 2011 Mac Book pro 15 inch battery indicating zero

    I have a 2011 Mac Book Pro (end) retina which really is not used as a laptop display. (always connected)

    Just today, he showed zero percentage battery icon.

    I have reset the SMC and that did not help

    Should I try to disconnect the battery to see if it would help

    Is the battery shot just like that?

    Thanks for the help

    In addition, if the battery needs to be replaced can I do it myself?

    Hello

    The battery may be necessary replacement.

    Check the number of maximum cycle. Instructions here > Determining battery cycle count for Mac notebooks

    http://www.Apple.com/batteries/service-and-recycling/

    You can replace the battery yourself > https://www.ifixit.com/Guide/MacBook+Pro+15-Inch+Unibody+Late+2011+Battery+Repla cement/7511

    But if you have never done this before, I recommend you take your Mac to an Apple Store. You can make a reservation in advance at a Genius Bar.

Maybe you are looking for