Reset the link password Hotmail account does not work.

Similar Questions

• Original image has disappeared I think off the hard drive and the BIOS password set up does not work?

  Someone please help me with this!

  I bought this laptop from a friend (have receipt) who sell it to me because the screen was cracked and spidered all out when you the activated. And everywhere he went to ask to get the screen fixed it is very expensive ($250 - $350) and he said that it would be just a newer laptop. So he sold me this which is a model Probook of HP4420s XT940UT #ABA. About a week after I bought this Probook friend who sold it to died me suddenly. It was sudden and terrible. Some time later, I had the time of the purchase of the LCD for this model, replace it myself (was very easy actually) and booted up the laptop with a new installation of Windows 7 Professional 64-bit Edition. After installing all my software and using the laptop for a while now, I wanted to get into the Bios that I've never done. So when I started the laptop, click ESC, then F10 to enter the BIOS, there were two places to enter a password is different then all Dell I've ever owned. One was mine I guees I put in place using HP protect tools and the other says BIOS/administrator. Well I can do most of the changes with the one I put in place with my password but my password does not work, nor can I get in some very significant changes that I wanted to do using Bios/administrator, as kindling the LoJack, namely the blocking of the hard drive etc. , turning on turbo boost, fan, etc. Well, since the person I bought is no longer with us, there is no one to turn to the answer to this question of administrator/BIOS password / problem.  I tried to take battery Rtype and restore that way, didn't work. Several times, I called HP and they sent me to a BIOS page to download the same BIOS, I have already, would not let me install it. When I bring up the command prompt and do not put anything in BiosConfigureUtility.exe happens, said just a wrong command. When I try to enter the BIOS through the C: file in the files of the SSM, I reach the BiosConfigUtility.exe file, click on it to open it and it just flashes a way small order page to fast to read what it says. I would like to have complete control over my laptop thinking I have a lot of time and money invested in it now. The problem would have something to do with installing the 64 bit version of Windows 7 instead of the 32 bits guess what it initially provided with?  Where can I find the UUID and what tech Department I would ask because if I have to call HP again and what other information should I have ready for them if you know? I have all the manuals and they say that this laptop is compatible with Windows 7 Ultimate 64 bit Pro is what I installed. I'm mixed responses from many different people on this and would like an answer from HP someone who has experience in dealing with the BIOS in the Probooks business models if possible please. I really like this Probook and have since become a big fan of most HP, Dell and Lenovo.  I intend to buy two probooks, one for my wife and one for my daughter because this one is like a MacBook, but better.  Thank you for reading this and I hope someone can help with more than one answer then GET AHOLD OF HP TECHNICAL TEAM. As I said, I did it.

  Model: HP Probook 4420 s

  Type: XT940UT #ABA

  Operating system: Windows 7 Ultimate

  BIOS version: 68AHHH Ver.F.20

  SM BIOS Version: 2.6

  Hardware Extraction layer: Version 6.1.7601.17514

  Jason,

  Sorry to hear about your friend and your problem.  The BIOS password cannot be reset without the help of HP.  They will need some information from your PC and increase your case.  I recommend you give them a call.

  -wes

• Having the right password Adobe which does not work on cc can find no password to work CC. need to replace slice on the second computer

  Recent new laptop. CC not updated I have even on office and was on the previous laptop and can only be loaded on both devices.

  I work Adobe password which will not work on cc cannot find or find a dedicated password CC. In a traffic jam.

  If you're talking about being asked a password during installation or update, this is the password for your COMPUTER, from your operating system verifies that you are authorized to make changes

• Hotmail account does not work after downloading avast antivirus

  I can't get my hotmail to work on my computer at home after I downloaded the avast antivirus on my computer. It won't let me click on messages to open and read, or even compose a message.

  Hello

  You use software like Outlook or other, to access the Hotmail? Or do you want
  online access to Hotmail?

  Check with the support of Avast and their forums that this is not a usual State.

  Avast, support
  http://www.avast.com/support

  Avast Forums
  http://Forum.avast.com/

  I hope this helps.

• I forgot the password and secret your answer, and my e-mail account does not work

  I forgot the password and I forgot the secret answer also, and my e-mail account does not work. I just my alternate email account, but my password is not sent to my alternate email account. any body can help?

  Call your e-mail server. Bruce Hagen ~ MS - MVP [Mail]

• Adobe Illustrator CS6 My trial expired, I need the serial number to complete the installation, but my account does not have the serial number

  Adobe Illustrator CS6 My trial expired, I need the serial number to complete the installation, but my account does not have the serial number

  Find the serial number of your Adobe product quickly

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat

  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp

• When I try to update creative cloud, I get a popup to connect, I get my Adobe password, but it does not work. I have reset my password and I tried again, but it still does not work.

  When I try to update creative cloud, I get a popup to connect, I get my Adobe password, but it does not work. I have reset my password and I tried again, but it still does not work.

  The password screen shake when you enter the password?
  If so, it asks your Mac password.

  Don't worry about file opm, Adobe recreates him when you try to connect.

• I have connected, but when I need to update apps, again request the password, but it does not work?

  I have connected, but when I need to update apps, again request the password, but it does not work?

  Birgitte salvation,

  Have you tried to enter your system password.

  Please let know if it still does not.

  Concerning

  Megha Rawat

• Get "key to upgrade is for the edition of windows that does not work with Windows Anytime Upgrade"

  The PC is running Windows 7 Starter.  I'm trying to upgrade to Windows 7 Professional. I bought the card from Windows Anytime Upgrade Key.

  When I entered the PK, error, "put key in level is for the edition of windows that does not work with Windows Anytime Upgrade"

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  Additional resources:

  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-windows_install/how-to-successfully-do-and-troubleshoot-Windows/47e1943f-8255-452A-a7ad-2ae14dc974af

• The license we use for an old PC no longer valid for the new PC - uninstall of the old PC and still does not work on the new PC

  Hello

  The license we use for an old PC no longer valid for the new PC - uninstall of the old PC and still does not work on the new PC

  A disable the old installation before you uninstalled?  If this isn't the case, then it is always considered as enabled, which could mean that you have all your activations in use.  You can contact the Adobe Support via chat and ask them to reset your activations.

  Chat support - the link below click the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

  If none of this helps can you identify which software it comes and what error messages you get when you try to run on the new machine?

• My Icloud account does not work. As soon as I try to connect my PC know "this browser is not supported. What went wrong and what can do?

  My Icloud account does not work. As soon as I try to connect my PC know "this browser is not supported. What went wrong and what can do? I previously used the same connection to my account for a long time without any problem. My PC I have a tie with Windows 8

  < personal information deleted by host >

  Hi bengtfrombelgentier,

  Welcome to the communities of Apple Support! I'm sorry to hear that you are experiencing these problems access iCloud. If you are unable to access iCloud.com due to an error of supported browser, you can check the browser requirements set out in the following article:

  Requirements for iCloud - Apple Support

  Concerning

• After the 9.3 Safari browser does not work on my iPhone 6 s.

  After the 9.3 Safari browser does not work on my iPhone 6 s. Any solution to this bug? I've been trying different menthods as the incognito but still the same. He was great before working. And now, when I tap on the link of the application crashes.

  It is a known issue and Apple is working on a fix. This article summarizes some of the problems with the current version. To disable Javascript in Safari, but this sacrifice functionality with the web browser.

  http://osxdaily.com/2016/03/25/Troubleshooting-iOS-9-3-update-problems/

• My internal camera on my MacBook at the beginning of 2008 Pro does not work

  My internal camera on my MacBook at the beginning of 2008 Pro does not work.

  One of them will solve your problem of camera:

  (1) If your Mac restart does not solve the problem,

  (2) use http://support.apple.com/kb/HT2090 from Apple.

  (BTW - troubleshooting section called an "iSight" camera.  However, after that article was published, Apple has changed the name of the built-in camera on the recent "iSight" Macs "FaceTime", then "FaceTime HD."  Whatever the name of your built-in camera, the same info and troubleshooting applies.)

  Be sure to test several Apple app (photo booth, FaceTime, iMovie, QuickTime Player, etc.) in more than one user account.  Do NOT use the 'Guest' for this test account.  If you don't have more than one user account for testing, create one now.  If you need help, how is explained in http://support.apple.com/en-us/HT201754.

  A 'Standard' user account is all you need for the tests.

  (3) If your camera will work correctly even with Apple applications, use OS X Recovery to completely reinstall your Mac OS since system recovery stored on your startup disk.  Don't bother test Skype or other 3rd party apps until you have your camera works with applications Apple.

  (4) If none of the suggestions above resolve your issue, contact Apple or one of the Apple-Authorized Service Provider to have your Mac professionally repaired. Don't forget to back up your Mac and Deauthorize iTunes before the call for tenders for the service.

  Post edited by: Jim EZ

  Mac OSX 10.11.3

• Setup could not initialize - I've lost hours trying to find solutions online and forum... to change the file to add .old - does not work; Open the file 2/2 still didn't work... Help!

  Setup could not initialize - I've lost hours trying to find solutions online and forum... to change the file to add .old - does not work; Open the file 2/2 still didn't work... Help!

  Please see the links below:

  https://forums.Adobe.com/thread/1848277

  https://forums.Adobe.com/thread/2055767

  Let us know, if you still get the same error even after trying it all the steps mentioned

• The links on this page do not work?

  Download the CS3 products

  I have the serial number, but I don't have the software, but the links in this site do not work

  Hi Julien,

  It seems that you have the serial number for a volume license product.

  Reference: Adobe site licenses | Serial numbers | Orders | Accounts

  Kind regards

  Sheena