Reset the network adapter

Network card must be reset? WHY?

Hi jrklickmybagzoso,

·         Exactly when you receive this error message?

·         Did you the latest changes on the computer?

I suggest you follow the provided article and check if it helps.

http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

Tags: Windows

Similar Questions

  • This could be the cause I have to continually reset the network adapter named local area connection?

    Hello

    I think I have to click on the network icon in the taskbar at the bottom right of the computer. To connect to the Internet, I have to reset the network adapter named "Local Area Connection" every time.  The computer can be idle for 30 minutes or more, and the adapter needs to be reset.  I have road runner cable internet and the operating system Windows Vista HP computer n about 3 years.  Have no idea?

    Thank you all for your help.

    Ryan

    Try this: configuration panel, Device Manager, expand network adapters

    Double-click your adapter LAKE, the power management tab

    Uncheck the box;   Allow the computer to turn off this device to save power, OK

  • Firefox loses Internet every 5-10 minutes (as for example, Skype does not work), and the only way to solve this is to reset the network adapter (reset DNS and get the new IP address?)

    I click with the right button on the icon of the network adapter and press "fix." After that, I can browse sites for 5-15 minutes. But then the story repeats itself. And all of this can happen while I will have a video chat on Skype, so the internet connection is OK.

    • Try this.
    • Type in the bar of address about: config.
    • Accept the warning.
    • On the page that appears, in the filter box, type Network.http.Max - connections.
    • Replace the value 32 (which is probably the value 256 in your case).
    • Close the topic: config page.
    • Restart the browser.
  • Cannot connect internet telling me to get a new section Parametresip so I have to reset the network adapter whats the problem please?

    IP settings & reset network adapter

    Hi, Maxim,.

    ·          What is the exact error message you get when you try to connect to the internet?

    ·          You did it changes on your computer before this problem?

    For your reference, am adding this link.

    Network connection problems

    http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

    The problems of Internet connection

    http://windowshelp.Microsoft.com/Windows/en-us/help/fc58605e-A2be-470C-95b3-6808a76347991033.mspx

    Please provide us with more information so that we can help you in a much better way.

    Concerning
    Joel S
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • How can I get my computer to connect to the internet evey time that I boot it up without having to reset the network card?

    Whenever I start my computer I have to reset the network adapter or get new settings of IP so he can connect to the internet. When that I starts it connects to a LAN only.  I have cable internet. My modem works fine. I have Windows Vista and Internet Explorer 8.

    Hello

    See the following link, it worked for me. I'm sure that it will work for you as well.

    http://www.Vistax64.com/Vista-General/151727-connect-Internet-startup.html

  • HP ENVY x 360-15-u110dx: reset the wireless adapter

    I have a new HP ENVY x 360-15-u110dx and it is not connected to the internet. I have to constantly reset the wireless adapter. What should I do to fix this?

    @pjg31660,

    Hello and thanks for the display on the HP support forums.  Here is a link that should help you solve your problem.

    HP PC - Troubleshooting wireless network and Internet (Windows 8)

    Please let me know how things are going.

    Thanks again for posting and have a great day.

  • "Cable not connected to the network adapter.

    WRT400N did not come after start stop and cold pc.  Windows Vista repair & diagnostic returns "cable not connected to the network adapter.  I tried to plug and re - plug cable ethernet; router power off (+ 10 sec.); Linksys repair; reset the modem, etc.  The success of the Internet, but no router.  The only solution is a pc "restart" and then the appropriate router port lights up and all is well.  What is the real solution please?

    Hi Helm,

    I finally got the router to work after several reboots and struggles.  in any case, I'm always game to try almost anything if you have any other suggestions...

    Thank you

  • Reset the network settings

    My network connection to internet is good.  But the MacBook can't connect. How do you reset the network settings.

    Follow the instructions in this thread How to reset network settings completely a Mac?

  • Even though I have my iPad WiFi connects to the internet even after that I have reset the network settings

    Having never had a problem with my iPad since buying about 3 years ago, suddenly I can't access the internet use it & none of the applications that need the internet have access either. (since the last update for IOS 9.3) I have reset the settings of the internet and the WiFi signal at the top is visible. Airport app told me that I have access to the internet, but I did not!  Does anyone else have this problem? I would really appreciate a quick solution, because it's so annoying when things sync and I need them to-such as the events of diary, photos email etc. not to mention the SMS!  Any help gratefully received!

    General suggestions for Wi - Fi problems, maybe one of them will help you...

    (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

    (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

    (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

    (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

    (5) disable the prioritization of device on the router if this feature is available.

    (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

    (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

    (8) to restore the device (ask for more details if you wish).

    https://support.Apple.com/en-us/HT201252

    (9) go to the Apple Store for the evaluation of the material.

  • Closing remove the cable of the network adapter.

    My adptor network stops when I take off the same cable I got disabling the shutdown option in network properties. Please give the solution

    Have you tried to uninstall the network adapter and reinstall or update if a new driver is available.

  • Impossible to log the area after the network adapter is disabled

    I created two domain controllers in a single domain (Windows 2008 R2) in a lab environment. On the 2nd DC, I disable the network adapter, and then restart the machine accidentally.  I couldn't neither newspaper any longer on the field, (obviously) or the local machine. Is it possible to let me log on to the domain controller and to reactivate the network card? Although my situation is produced in the lab environment, network adapter may fail in the production environment as well.

    Post in the Windows Server Forums:
    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

  • Automatically get new IP settings for the network adapter

    I have a home network with two computers Vista and I have a Vista laptop for work.  Where my work laptop is home it does not automatically connect to the internet, similarly if I want it.  When I go to network and sharing on laptop computer center it displays icons for the laptop, my home and internet network.  Threre is a X red between the network icon and the internet.  If I click on the red X a pop-up window indicates that Windows checks the problem.  Then a box will appear with several options, one if which is automatically "get new IP settings for the NIC 'Wireless Network Connection'.  When I click on a window pops up that says repair, and after a brief interval, she announced that the problem has been fixed, and it was fixed.

    How can I configure things so that she will do it automatically without this manual intervention.  There must be some way because I have never asked a password or permission to continue.

    If I turn off the laptop and then turn it back on a few moments later, the network connection is still there.  The problem occurs when I try again a few days later.

    Thank you.

    P.S. I tried to submit this a couple of days, but it does not appear under my son, so I don't know what happened.  If the previous post is without me being able to find I apologize.  I don't like having to type things, that's for sure. Jim

    Thanks for the reply.  I did it.

    I'm not sure it would fix the problem however, because the problem occurs after a day power off and power back up a few days later.  So presumably the power to the network adapter has been disable for power off intervals.

    Something happened tonight when I put under tension.  Asked me to confirm something on the network (unfortunately I can't remember what) and after that, I was connected to the internet - without having to go through the manual process described with my problem.  So maybe something has been reconfigured will correct the problem. Jim

  • "The network adapter is not correctly configured to use the ip Protocol" problem on Vista

    Hello. My PC has recently came across this problem "the network adapter is not correctly configured to use the ip Protocol", every time I click on diagnose & repair. I don't know how to fix it. Please help, thanks in advance. Magic

    Hello X-x_MaGiC_x-X,

    Thank you for visiting the website of Microsoft Windows Vista Community.

    Try the rest of the stage in this article:

    System restore points are created automatically when the following occur:

    • When you install a new application or driver.
    • When you uninstall or install some programs.
    • When you install new updates
    • Automatically on a daily interval
    • Manually by creating a.
    • If you choose to use system restore to restore to a previous restore point, System Restore creates a new restore point before you restore a previous state in case something goes wrong. If you are restoring to a previous state in Mode without failure, a restore point will create for the current state.

    So that the restoration of the system to work, you must have 300 MB of free space for each hard disk that monitors the system restore. System Restore will also use up to 15% of disk space on each disk that it monitors. That hard disk space runs out, older restore points will be deleted as newer ones. It is also important to note that you must be logged in as an administrator in order to use the system restore. Now that you understand the basics of the system restore, you must continue to the next section to learn how to use it.

    Restore Windows Vista to a previous state

    In the case of a problem on your computer that cannot be solved by normal means, you can restore your computer to a previous working state. To do this, you need to start restoring the system so that you can choose the restore point to restore. If you currently have Windows Vista boot problems, you can use the system restore in Windows recovery environment. Instructions on how to do it in this tutorial can be found: System Restore using the Windows Vista recovery environment.

    If you can connect to Windows Vista, you must follow these steps.

    1. Close and save any documents that you have opened.
    2. Click the Start button to open your Start Menu. The Start button looks like this:
    3. When the Start Menu open click on the menu option all programs.
    4. Click once on the Start Menu Accessories group.
    5. Click once on the System Tools Start Menu group.
    6. Click once on the icon of the system restore. After you click the icon, if a user account control window opens, click on the button continue.

    You will now be on the screen as shown below in Figure 1 system restore. From this screen, you can specify the restore point that you want to restore.

    1 screen of system restore

    By default, Vista will be already selected the restore recommended option. This restore point is one followed a new pilot program, or update has been installed. If you do not want to use this restore point, you can click on the button next to start the restore process. On the other hand, if there is a more recent restore point that you want to restore you should select choose a different restore point and press the next button. This will bring you to a screen, as shown in Figure 2, which contains a list of all available restore points that you can restore.

    2. the list of available restore points

    You must select the restore point that you want to restore, and then press the button next to start the restore process. Vista will display a window showing your selected restore point and asking you to confirm that it is that you want to restore.

    3. confirm the selected restore point

    If you want to select a different restore point, press the Back button. Otherwise, you can press the Cancel button to exit the system restore or the button finish to begin the restore process. If you have selected finish, Vista will display a second prompt asking you to confirm that you want to continue restoring.

    4. second Confirmation

    If you are sure you want to restore, then press the Yes button. Vista will now log you off the computer and start the system restore process, as shown in Figure 5 below.

    5. restoration of a restore point

    When the restore is complete, your computer will be restarted and when Vista starts it backup will be restored to its previous state. When you open a Vista session for the first time after the restore, you will see a message indicating that the restore was successful.

    6. system restore was successful

    If there are problems with your computer because the last restoration, you can return to your previous settings to ebb in the system restore utility and select Undo system restore by pressing the next button.

    7 undo the last system restore

    Your computer should now work correctly again.

    With the help of the restoration of the system in the Windows recovery environment

    Manual creation of Restore Points

    As mentioned previously, it is also possible to create manual restore depending on points. Some popular designs to create manual restore points are when you have your computer configured perfectly and I would save the State in case of problems in the future. To create a manual restore point, you must follow these steps:

    1. Click the Start button to open your Start Menu. The Start button looks like this:
    2. Click on the control panel menu option.
    3. Click the option menu system and Maintenance.
    4. Click on the system menu option.
    5. Click on the System Protection in the list on the left.

    You will now be at the System Protection tab in the system control panel. This tab allows you to enable and disable the system restore as well as making the new manual restore points.

    8. the System Protection tab

    To create a manual restore point, you must click on the button create. When you press this button a prompt asking you to give a title to this manual restore point.

    9. Enter the manual restore point title

    Type a title for the manual restore point and press the button create. Vista will now create a restore point manually and once finished, post a notice that it was created successfully.

    10. Manual restore point has been created

    Now that you have finished doing the manual restore point, you can close the system window.

    Try to download the correct and up-to-date drivers.

    This should solve your problem.

    Let us know if these steps solve your problem.  I hope the information is useful.

    Kind regards

    Anthony
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Update the network adapter for Dell UPS

    We have two Dell UPS 4200W, each with an EBM 192V.

    I can not access our network UPS interface because it is old SSL certificate. I guess the network adapter needs an update. If I update the inverter by its USB connection with software upgrade to UPS, which will also update the card, or do I need to connect directly to the port settings on the map?

    If I run an update via the USB port, there will be no downtime, or all our servers will continue under tension?

    Thanks for any help.

    JaxonT,

    The update you need is right here. The update should be pushed through multiple UPS Dell Management Console, which you can find here. There is also an update of the firmware available for the inverter, you can download it from here. Now with most of the firmware updates, the system will usually have to restart. I suggest scheduling downtime, just in case.

    Let me know if it helps.

  • The upgrade of the network adapter

    Recently improved the speed broadband to 150 MB.   Inspiron 1525 - network adapter allows 100 MB max. Can I put the network adapter?  It of easy to do it yourself or require the help of a technician?

    Another option is to try a Gigabit Ethernet adapter.   Google for information, but I suggest to not to bother at least that your computer has a USB 3.0 port.

Maybe you are looking for

  • e9200z: the fastest processor for e9200z

    I need to know what is the fastest processor / best I can update my system with. I have a HP e9200z CPU: AMD Phenom II x 4 925, Socket AM3 (938) Motherboard: Foxconn Aloe 1.01 Chipset: AMD 7895G Rev: 0.0 Southbridge: AMD SB700 Rev: 0.0 LPCIO: ITE ITI

  • Satellite P25: How to reinstall the original software without original car work?

    I have a P25 who lost his screen and dvd.The screen is black with a low light (control problem charts I am told by Toshiba repair - requiring parent = USD1000 map change). The DVD (Mat * u UJ - 809?) produces noise, but is not recognized by Windows.

  • Find the table if element have the same element in all indexes

    Hello I need to check if a table have the same element in all its indexes. (Example: an array of size 4, should have index 0... 3 1 and during the next iteration index whether no. 2 overall indexes...) How can I check if all indexes have same number)

  • Error fatal Q5 blackBerry on 10.3 updated

    I tried to update the software on my phone and it says fatal error. I usually check the error code but it is not a so I thought I would ask here. I tried to update via Blackberry link on my computer and that's when I get the fatal error. And he didn'

  • Strikes to apply styles to paragraph Muse?

    I am typing text directly in the Muse.How to make paragraph styles using keystrokes instead of going in the paragraph Style Panel and clicking a style name?