ReSet weather location

Have had the Xperia M4 for a week now and I would like to change the location on the weather app (AccuWeather.com)... Have you tried following the instructions to take advantage of no.... Help appreciated, thanks to soon

If you tap on the small gear, you should get 3 options here, location, unit of temperature and sensation.

Tags: Sony Phones

Similar Questions

  • How can I remove a weather location of Bin?

    New on Windows *.

    I can add Bing weather locations.

    I can't figure out how to remove a location.

    See you soon!

    Dennis

    Hi Dennis Ford,.

    Thanks for posting in Windows 8 community!

    From your problem description, I understand you want to remove a location from the Bing Weather app. Don't worry; I'm here to help you.

    You cannot delete the default. You must first go to places in the application and right click on another city and set as default, then you can right click on Seattle and remove it.

    You can change the default location by following these steps:

    (a) enter the weather underground style app

    (b) right click your mouse to display the bar of the App (if you use a touch screen: touch your finger to the bottom of the screen and drag it upward with your finger)

    Note: the Places icon will appear in the upper left of the screen.

    (c) click on place

    (d) If you do not see your current location, click on the + tile and add this place

    (e) click on the place you want to set as a default

    (f) right click your mouse to display the bar of the App (if you use a touch screen: touch your finger to the bottom of the screen and drag it upward with your finger)

    (g) click on set as default value displayed in the lower left corner of your screen

    Once this location is defined by default, you will pass to this place when you open the weather app. You can also delete a place (which is not the default location), by clicking on it to see this place in places and display of the bar of the App click on delete.

    It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  • How to set the location of the opening Firefox window on my screen?

    The window opens almost always in a small format in the upper right of my screen. It's a waste of effort to have to move all the time. (Sometimes, it opens the way that I like, but whenever he starts to do, something requires that I have close Firefox and he draws back the top right of the screen in a small size.) I hope that there is a simple way to reset opening
    location and size of the window opening.
    Thank you. Larry Coons 6 / / 29/13

    Hello

    The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
    Note: This will make you lose all the Extensions, open Web sites and preferences.

    To reset Firefox, perform the following steps:

    1. Go to Firefox > help > troubleshooting information.
    2. Click on the button 'Reset Firefox'.
    3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
    4. Firefox opens with all the default settings applied.

    Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

    This solve your problems? Please report to us!

    Thank you.

  • Lenovo G510 cmos jumper location

    Hello

    I have a problem, because I changed a few settings in my bios (on the Advanced Options tab), and now the computer starts, but no display at all since the beginning (computer is turned on, but it is everything, will not start the system or anything).
    Because of this problem, I need to locate the jumper cmos or something similar to reset the bios (I can't do this via recovery key because of the screen thingy, so I need for this equipment way). Can I please have info about this bios reset jumper location?
    My motherboard is viwgq/gs la - 9641p rev 1.0

    In the hope of answers.
    Have a nice day y ' All
    L.K.

    Unfortunately, he got solved by buying the new bios chip and replacing the old.

  • Just don't reset WRT120N

    I'm seriously starting to hurt in the head. Urgh. Sorry if this question was asked before. I searched for a few hours now.

    I'm trying to get this router to its original shape (pass: admin (?)) but the "hold for 45 seconds reset button and unplug for 30 seconds" just doesn't seem to work. When I try to install with the CD it just repeat myself that I have to reset it.

    In short, how do reset you the WRT120N? Are lights assume to blink to indicate that you are is to take the bottom of reset?

    Thank you.

    Make sure the router is powered. Then press + hold the reset button of your router for 30secs first. (Reset is located on the back panle to your router, you must use a pen or a paper clip to push the button) Because if the flashing power light which indicates that the router is reset and then powercycle the router to only 30secs.

    If the power LED flashing press + hold the Reset button for 1 min, then Powercycle the router for 1 min. Then, check the IP address of your PC and then try to access UI (192.168.1.1) your router and use admin as password.

    Another thing to be safe make sure you don't have any active firewall if you have to access the user interface of the router.

  • How can I move the location of the file owner?

    In Windows XP, you could move the folder my documents.  In other words, if I wanted to the folder my documents on a different hard drive partition, I could.  You can do it in Vista?  I can't find any way to reset the location of the folder titled 'owner' in XP.  Thank you.

    To move Documents folder, click the Start button, click on Documents and click Properties > location . Boulder computer Maven
    Most Microsoft Valuable Professional

  • reset of bean

    Hi Experts,

    11.1.2.1 JDEV
    Can we initiate a reset button (inside a shape and it's invisible) action (ie., press the button) of a bean manged?

    If it is a stupid question... Please ignore...

    PMS

    Published by: pms on February 24, 2012 16:25

    Let me help you with a code more, that I hope make things clear:
    You can either call resetValues and pass a UIComponent, you have access to your bean to the next method. This will reset all the fields that are in the same container as the UIComponent.
    To get a UIComponent you can link it with an attribute in your bean.

        public void resetValues(UIComponent startComponent)
        {
            FacesContext facesCtx = FacesContext.getCurrentInstance();
            // pass component inside the UIForm, UIXForm, UIXSubform, UIXRegion, UIXPopup, RichCarousel
            // or RichPanelCollection which holds the components to reset
            ResetUtils.reset(startComponent);
        }
    

    or you use the following method where you don't even need the UIComponent itself, but only the id of the component. Here, you pass the id for example of af: form to the method resetValuesByContainerId (String compId), for example resetValuesByContainerId ("f1"); If on af: has the id "f1".

        /**
         * resets all valueHodler components values found in the container named by compId
         * @param compId Id of hte container holding hte valueHolder components
         */
        public void resetValueListenerByContainerId(String compId)
        {
            FacesContext facesCtx = FacesContext.getCurrentInstance();
            UIComponent ui = findComponent(facesCtx.getViewRoot(), compId);
            if (ui != null)
            {
                // pass component inside the UIForm, UIXForm, UIXSubform, UIXRegion, UIXPopup, RichCarousel
                // or RichPanelCollection which holds the components to reset
                ResetUtils.reset(ui);
            }
        }
    
        /**
         * Locate an UIComponent from its base component.
         * @param base Component
         * @param id UIComponent id
         * @return UIComponent object
         */
        public UIComponent findComponent(UIComponent base, String id)
        {
            if (id.equals(base.getId()))
                return base;
    
            UIComponent children = null;
            UIComponent result = null;
            Iterator childrens = base.getFacetsAndChildren();
            while (childrens.hasNext() && (result == null))
            {
                children = (UIComponent) childrens.next();
                if (id.equals(children.getId()))
                {
                    result = children;
                    break;
                }
                result = findComponent(children, id);
                if (result != null)
                {
                    break;
                }
            }
            return result;
        }
    

    Timo

  • Gadgets on my computer - current information is not available.

    Original title: Gadgets on my computer

    A friend and colleague prior moved to Florida and we love to compare and discuss the variables at the time, during or after events such as tornadoes and severe thunderstorms. so, I got my time put in place for its region and my region.  Now, the gadget on my desktop box only shows that the current information is not available.  When I try to open the icon and reset a location, EVERYTHING WON'T WORK, and it does not matter what you're trying... The site is empty or has me locked.  Why?  Is this something I have to repeatedly order or update?  It's frustrating.

    Unfortunately the gadgets are no longer supported:

    http://Windows.Microsoft.com/en-us/Windows/Gadgets

    You can try to look for third-party Apps that displays the weather. For example, you try to install Bing desktop:

    http://www.bing.com/explore/desktop

  • Why the iPhone 6plus will not open photos app on mac pro for IOS 10 update.

    Why the iPhone 6plus will not open photos app on mac pro for IOS 10 update.
    A message appears on the iphone asks you to trust the computer it is attached (mac pro 10.10.5)

    You type 'Confidence' and nothing happens. the photos on mac app publishes this message.

    This Mac not yet have been granted access to the media on 'my iPhone '. To import media to this Mac, press 'Trust' on 'my iPhone '. You must first unlock the device.

    This actually solved for me after going to settings, General, reset, reset the location and privacy... and then plug in the unit and pressing the trust... hope that works for others.

  • GPS apps in the background

    I have an iPhone 6 s upgraded to iOS 10 the day it came out last week and I noticed that applications using GPS are failing in the background when several applications are in use. I ran to the Waze to check the traffic and Google Maps at the same time to check something on Friday and has noticed that if she was in the background would tend to turn off after a few moments. When I turn back, she will have to acquire the road again. I also have a Fitbit load HR, which uses the GPS on the phone via bluetooth to create a map of my route. I have it worked out with my usual Runkeeper app (which normally works perfectly) and noticed that Runkeeper would be closed after a mile or more. When I went to him to my podcast app after my race, Runkeeper would start up and missed the last two miles of my race. In addition, the road saved by Fitbit seemed jumped all over the place. I know that it is not unusual for GPS from blip, especially when moving through areas with weak signal or cell mutation or all through the streets of the city with tall buildings, but it seems that the problems have become more coherent. I have not tried to run with a single application to see if I have the same problem, but will try tomorrow. I used only a single app for navigation (Waze) yesterday evening and he seemed also to close after it is placed in the background for a while. Has anyone else seen anything like this?

    Hello alexhoward,

    Thank you for using communities of Apple Support. It is my understanding GPS apps do not work in the background, after the update to iOS 10. I use GPS every time I travel. I know that it can be crucial for applications GPS running in the background. I'm happy to help you

    I recommend first restart your iPhone. This can solve many unexpected behaviours. Follow the steps below.

    1. Press and hold the sleep/wake button until the Red slider appears.
    2. Drag the slider to turn off your device completely off.
    3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

    Restart your iPhone, iPad or iPod touch

    If the problem persists, reset your location service. This resets all settings at default location. Apps will be stop using your location until you grant them permission again. Go to settings > general > reset > reset the card and privacy. Here is some additional information on location Services.
    On privacy and location in iOS Services 8 and later versions

    See you soon!

  • Post 10 IOS could not be detected

    I use a website safari can refresh my situation.  It has always worked on my iPhone to ios 10.  Now, I get a message that says 'position could not be detected.  I have reset the location services, makes the market, rebooted my phone, reset network services... nothing I tried worked.  This site has worked well in the IOS 9.3.5.

    I'm having the same problem. Did someone came up with a solution?

  • Trusted websites?

    Somehow my IPod running 9.3.3s date and time has been changed and when I went to search it says "trust" to something and I did so I could seek, whenever I tried something else, it pops up again and im wondering how to untrust these things, I set my date and time back to normal and alerts went, but I don't know what I trusted, so I want to untrust, any help?

    Also, I reset my location and protection of personal information

  • GPS and Wifi issues

    Hey guys I wanted to do and take into account and post this question because it affects my Pokemon catch capacity:

    My GPS just do not work with precision and not enough fast. I noticed about a year ago when I tried to use the WAZE app for the first time and it does not locate my position accurately enough and it's the same for Apple and Google maps.

    I've never really cared because I rarely travel too far and my GPS worked well enough for me to navigate when I should not rely on a map. Now that Pokémon GO is out which relies on positioning very accurate since some Pokemon can only be captured in some areas, it is really annoying that my phone takes a lot of time to put me in a general situation or fails to find me at all. I know it's just a game, but it's really annoying because it's the first week of release, and all my friends are playing. Seems my GPS only works pretty well to play when I'm more urban areas in my city (perhaps the buildings help focus signals on my phone) compared to parks and suburban more areas. The phone would make my position in the game by tens of metres offshore and sometimes would be me all about teleport to another whole BLOCK!

    I think it may be a hardware problem because I also noticed that my phone started to worsen to pick up WIFI signals as well. I use to be able to walk my business and maintain a good WIFI signal and now it seems that I can hardly connect to my router unless I'm less than 10 feet of it. Around, I read that this could be a short film of either a bad charging cable, damaged by the heat that damage the WIFI and GPS, modules or an update that fried partial systems.

    I checked my router with the new iPhone of others and they had really good reception of the WIFI signal like what I had at first, that's why I think it's a hardware problem. I did a reset, full location Services are on and I tried every solution developers Pokémon GO suggested. While I'm due for an upgrade to another phone soon, being is not able to play with friends and walk around looking for Pokemon cool is a disappointment.

    Any suggestions or ideas on what could be the problem? I even tried to piggy back wifi hotspot a friend to see if I can use their GPS location. No luck.

    Hi FunnyAsianBoy,

    I'm not sure what you mean by "full reset", maybe you have already done this:

    If you want to know for sure if it's a hardware problem, here's what you can do:

    1. backup of the device, of course.

    2 replace the device to its factory settings using iTunes (contrary to "erase all content and settings ' application of the parameters, this will completely erase your phone, operating system included). Instructions: use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory - Apple Support

    3. DO NOT restore from a backup. Set the device up like new. If the WIFI problem is still there (and you have restarted your router at least once), there is a hardware problem. If the GPS problem is still there, but only on cell systems, I'd want to put your SIM card in another phone with the same provider (or put another SIM with the same provider in your phone) to isolate the problem.

    Alternatively, you can call Apple support so that you have access to a Wi - Fi connection. They have a diagnostic test of the material that they can do remotely, and they will do it for free. Of course, it is not as reliable as if you physically go to an Apple Store, but it is very convenient as you can do from anywhere.

    I hope this helps!

    Bakhtina

  • I use thunderbird in the New Zealand House and time zone settings, and when I invite people NZ for a new event it automatically creates a calendar for UTC entry

    I bought my computer laptop to the United Kingdom and installed Thunderbird there initially, but remains in NZ and reset home location and time zone accordingly. However, when I send invites to an event it resets the invite calendar for the recipient to UTC/GMT. My record of entry and invite calendar still shows what I entered in, but not their end. And it's the same thing in reverse, they send me something for 15:00, I get like 03:00.

    ... to restore the original location and time zone accordingly.

    Where exactly did you do that?

  • Windows does not recognize iPhone/iPod devices

    I tried to add music to a new iTunes library to my iPhone on my pc when I accidentally pressed the notification "do not trust this computer."

    I tried following the advice in this thread (removed the pilot): I accidentally hit "Do not trust" and now my iPhone won't sync to my computer. It won't ask me to trust him again even when I restart everything. Now what?

    And now my computer does not recognize my iPod or my iPhone when I plug it into the USB ports. They don't even charge. I know with certainty that the problem comes from my pc because when I plugged them both in another pc, Lesmanteaux both able to connect to the computer/iTunes. I tried restarting both devices, tried resetting the location and privacy, by restarting the computer, even performed a system recovery.

    When I go to "Devices and printers", the two devices are listed under Unspecified, Apple Mobile Device USB Driver, unknown category, troubleshooting needs (I tried that as well, when I do that it is said that all driver software is up-to-date)

    Driver status: Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)

    All my software is up to date (iPhone, iPod Nano, Itunes 12.1. (2. 27 64-bit)

    Please help me, I've got a flight tomorrow and all I wanted was to upload music.

    Have you tried using different USB ports? Try and see if it triggers the question "confidence." You can also give your iPod a restart is forced. Press the sleep and home for about 20 seconds. When you see the silver Apple, let go and let it reboot, then try again.

    If this does not work you can try something a bit more drastic. That's a lot of time, but not horrible. I had to do a few times with my devices and my computer.

    Try this, go to your control panel, add/remove programs.

    Remove iTunes (you won't lose any content not the program, I've done a few times), Mobile Apple, Apple Application Support device driver.

    For good measure, you can restart your computer just to remove the cobwebs.

    Then come out and redownload iTunes and reinstall it.

    Plug your iPod in and drivers must be reinstalled.

    All of your old info should be there. I've never lost anything. Essentially to remove iTunes and drivers have to reinstall fees, which can remove the obstacle 'I don't trust you. "

Maybe you are looking for

  • Compaq Presario CQ60-315EL - how to reset the bios password?

    HelloI don't remember the BIOS password.How can I do to clear this pw? Thank youGiuseppe

  • Mini 210-1014ea: Wifi does not not on HP MINI 210-1014ea

    So I've upgraded to windows 8 last year, it was quick but then day after day, it became slow. This laptop has 2 GB of ram and a 64-bit, Intel atom N450 processor. Given that windows 8 has been slow, I have dedcided to install windows 7. So after that

  • MicroSD Mobile Ultra 8 GB is NOT class 6! Please help me

    Hi everyone, first of all I apologize for my bad English, but I'm still studying it. In any case, I have some technical questions for anyone who can answer me: I bought directly from the official website of SanDisk a microSD Mobile Ultra 8 GB (serial

  • photos do not open "by date" in Vista

    Vista of my wife, when I open a folder in images, I want to automatically sort by"date".   I chose "by date" in this subfolder, but it opens "by name", and whenever I have to wait for it to go through the process of sorting 'by date '.   This situati

  • iDRAC6 1.98 openssl version

    Hello, we are looking to correct vulnerabilities in openssl on iDRAC6 and improved to 1.98 can you please advise if 1.98 fixed below vulnerabilities so we can get openssl version used in 1.98 thanks CVE-2014-0224,CVE-2014-0221,CVE-2014-0195,CVE-2014-