Resize C: and add the new partition F: and THEN run HP_recovery - will be the F: partition survive?

Similar Questions

• Wait for the host disconnects and then run a command

  Hello world

  I have a stop script for my virtual infrastructure, now I have to add code to stop an Equallogic AFTER the last host table is turned off.

  I know the commands to do this, but I need help to write a loop that will test the ip address of the last host management and wait until this station responds to pings.

  In my script I have to establish what host will be put off to the end so it's not a problem... How can I keep ping IP management host to die and then run the commands Equallogic?

  I hope that I managed to explain to me... I was exploring the Test-Connection cmdlet but it seems that it displays che echo of the ping instead of State... I'm a bit lost around this, can someone help me please?

  Something like that would do the trick?

  $count = 0

  $maxWait = 10

  {}

  $count += 1

  Write-Output "$(get-date-f HH) $(get-date-f JJ/MM/AAAA)-host is offline."

  sleep 5

  } until (!) (Test-Connection 192.168.110.85 - BufferSize) count 16-1 - calm)- or ($count - gt $maxWait))

  If {($count - gt $maxWait)

  Write-Output "Host always online."

  }

  else {}

  Write-Output "$(get-date-f HH) $(get-date-f JJ/MM/AAAA)-host is offline."

  }

• My outlook express won't let emails through. I am getting an authorization and then an error will appear.

  Outlook express won't come through

  My outlook express won't let emails through. I am getting an authorization and then an error will appear. Sometimes it will say: reception of messages, but none will come by.  A box appears and says that he put an end to the connection, maybe because of the connection to the server, the long period of inactivity or network connection. Also, I get a message on and which was completely removed several times on the file inbox and delete. I have no idea how to solve this problem or what I did to make it. I've never experienced this before.

  You probably have the widespread corruption of dbx files. Try in a new identity.

  File | Identities | Add the new identity. Create a new one and try it. If all goes well, you can import your messages and address book from the old identity and delete it.

  Note: Do not use the main word in the name of the new identity.

  In addition, follow these guidelines to help avoid this in the future.

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the processors and causes a multitude of problems such as time-outs and account setting changes. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

• installation of windows xp/vista/7 on USB and then running windows FULL of her not ONLY START from USB

  is it possible to install windows xp/vista/7 on a USB key and then run the FULL version of windows of him anywhere I want? Please, I beg you!

  Friday, January 28, 2011 18:56:58 + 0000, tupac shakur says:

  is it possible to install windows xp/vista/7 on a USB key and then run the FULL version of windows of him anywhere I want? Please, I beg you!

  # With all these versions of Windows, the installation is
  customized for specific hardware. This will not work on different
  material.

  Ken Blake, Microsoft MVP

• Trying to download a game that won't play, I asked for help on the game site and they start saying "click on start and then"Run". Try as I might I can't find "run". Any suggestions

  I am unable to find the 'run' which, according to the website of the game should be pinned to my button 'start '. Any ideas?

  I am unable to find the 'run' which, according to the website of the game should be pinned to my button 'start '. Any ideas?

  It is an older version of windows.  In 7 or Vista, click Start, and then use the search box - enter the article they say "run" and press ENTER.

• How do open Applescript AI can open the file and then run ExtendScript then close?

  Here is the code sample Applescript that I came with the help of the script guide/reference for CS6 and by doing some research online:

  Tell application "Adobe Illustrator"

  activate

  period of 10

  pfilepath the value "/ Users/username/Documents/Temp/someFile.ai".

  the pfile POSIX file pfilepath value

  Open the pfile as alias without options

  period of 10

  do javascript "#include" / Users/username/Documents/Temp/someScript.jsx ".

  delay 1

  quit smoking

  tell the end

  I just want to open the app (example here for, but also pleasant to do same for Photoshop), open a file, then run the ExtendScript file against her, and then close after treatment. With this example script, all that works is the app starts. No file not opened, any script executed, app does not close at the end. I see no error doesn't pop up or anything appear in the command prompt.

  Just ExtendScript sample triggers an alert popup for the test message

  Also note, the Applescript code snippet is executed from Python, but I think where/how it runs shouldn't matter (except perhaps where the error messages may appear). But in the worst case, I'll debug/run through the AppleScript Editor.

  Some tips on what's not here? Or is it technically correct?

  It solved here: MacScripter / POSIX Pass file path to Adobe Illustrator to run ExtendScript

• Determine the end of the month and then run the script

  Hi all

  OK, I'm stumped. I can get all kinds of data to date... but I did not find a way (or the same example script) that shows how to retrieve the end of the month.

  
  Why?

  
  I have a master script that runs as a scheduled task. It runs every day and call other scripts based on the date. It is great for things like weekly reports that I just used $dow = {get-date}. DayofWeek but I need to run scripts at the end of the month.

  I can something together that gets the day, and then performs a logical ugly pop-based < or > but I don't know there's a smoother way to do.

  As always, any help greatly appreciated.

  See you soon

  Hello, medalklector-

  One way to do it, it is described by RMToups, Jr. at http://activelydirect.blogspot.com/2011/01/determine-last-day-of-month-in.html.  You should be able to set the output to fit your needs.  How does do for you?

• In another thread - another method and then run Sub...

  I wrote a method to extract a string from a webpage using StreamConnection and it works perfectly... except that it runs on the main thread.  I wonder if there is a simple way to have a method that returns an object (String in this case) something to run on a thread and return it to the first thread.

  Everything I try the only thing I can get to work on the second thread is what's on the run method void, but that returns nothing... because it sucks...

  Until now what I thought is to pass the variables I need in the constructor, then set the connection stream real term where I want retruned is written in a class variable and another method that returns the class variable that has been filled with the run method... but that doesn't seem to just... thought he worked in a simple test I ran...

  A slightly different way (but completely equivalent) to work in a another thread is to create a class that implements Runnable and feed a thread. If, for any reason, you do not want to expand Thread (because your worker class extends already something else and it would be difficult to refactor), then this variant is a lifeline. You do something like this:

  class WorkerClass extends AnotherClass implements Runnable {    // ...    public void run() {       // do time-consuming work here    }}
  
  // later...WorkerClass worker = new WorkerClass();// initialize worker object. Then: new Thread(worker).start();
  

  As it is easy to turn a class in an executable (you simply add "implements Runnable" and a run() method), it's an easy way to avoid the subclassing Thread.

  Regardless of how you use to perform work in a separate thread, there is always the question of how to get the results. With the help of the observer is a common way to handle this, but in general, this means that the results are returned in the worker thread, not the thread from the main event. If you want to update the user interface, this can be a problem. Another approach is to structure your code something like the following:

  /** * Process the results of some time-consuming operation. */public void acceptResults(ResultType result) {  // ...}
  
  /** * Start a thread to carry out time-consuming work in a * separate thread and deliver the results back in the * event dispatching thread. */public void launchWork() {  new Thread() {        public void run() {           final ResultType res = computeResults();          Runnable r = new Runnable() {                public void run() {                   acceptResults(res);               }         }         Application.getApplication().invokeLater(r);      }
  
         /**        * Do time-consuming work in this method       */       private ResultType computeResults() {         // connect to server, interpret reply, etc.       } }.start();}
  

  You have the right idea that is running in a thread separate is how to manage a time consuming task. The point of all, however, is that you (the event dispatching thread) don't want to wait for the task at hand. Both the observer model and the code here offer a solution for a worker thread to do the work without blocking the thread of the event. The invokeLater() method was kindly provided by BlackBerry people to give the worker threads neatly transfer control on the event dispatching thread when needed.

• install new printer Epson WF-2530, will not install scanner drivers error message ' could not launchrequired program during installation, check the installation disc, and then run the installation again.

  having a problem installing drivers for a new Epson printer scanner all in a WF-2530 on my desktop using windows vista

  error message "could not launch the required program during installation, check the installation disc, then re-run the installer.

  I managed to install the software on my laptop using windows 7.

  spending some time with epson tech dept, after several attempts to solve the problem, they advised that it was a problem with the microsoft software.

  have tried to install it on the internet from the site of epson, but same error

  any help would be greatly appreciated

  < have="" tried="" installing="" over="" internet="" from="" epson="" website="" but="" same="">
  Do you mean that you have downloaded the Epson driver?

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&infoType=overview&OID=209709

  Try using the wizard adding printer in the Control Panel, printers. In the wizard, select EPSON under manufacturer. If you don't see your printer in the list, click the Windows Update button. It will take several minutes (about 20) be patient, Windows updates the list. You should see a hard drive activity during the update.

  If that wouldn't work, try to run the System File Checker:

  Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files
  http://support.Microsoft.com/kb/929833?WA=wsignin1.0

• I installed Windows 7 64 bit and then some programs will not install the 64 - bit while telling me that I have a 32 bit OS. How can I make sure I have load a 64-bit version only when there is a choice?

  I have create a new PC and installed Windows & Pro 64-bit. While some offer programs install both 32-bit and 64-bit as a single installation and the installation of the program checks it should install. A few programs installed 32-bit when I said to use the 64-bit. I received a message that I had a 32 bit OS and that it could not install the 64-bit version. How can I ensure that the 64-bit version is always installed when it is available. I have a program that I need it's 32-bit however.

  I also installed Office 2010 and want to know how to check if it installed 32-bit or 64-bit.
  All this is because I'm about to build a new PC for my wife and want to avoid these problems right at the front with it.
  Thank you
  Doug

  If you buy a commercial version of win7 you are provided with the installation dvd of bit versions and a unique activation key. You cannot install both versions.

  Most of the programs will install without problem in a 64-bit version of victory, there is very little that will not be installed on Windows 64-bit.

  You install programs as usual, you don't need to change any settings or install to anywhere other than their default locations. -C' IE you do not manually select the x 86 folder or any other folder.

  If the program you are installing has the ability to install a specific version of bit, and it does not work, then the problem is that options program installers, you must contact the program support

  A retail version of Office 2010 also comes with two versions of ILO.

  Having a 64-bit version of victory does NOT mean that you need to install 64-bit Office, in fact MS recommends that stick you with 32-bit Office (reason being compatibility with various plug0ins Office)

  And of course the 32-bit version of win only supports 4 GB of memory

• BlackBerry 10 Moving (and then running) apps on the SD card: when?

  Hello

  In the future will be included this feature in BlackBerry 10 operating system?

  Thank you!

  Hello

  This being 'information looking forward', nobody here can officially know this answer... and, if they have that official information, would be expressly excluded from reveal due to the NDA, Ts and Cs on the site, etc.

  Good luck!

• I clicked on the download button, click Run, click on install and then run the download screen and never finished.

  I ask myself this question before, but no response. This means that I can not even access my banking online. Any ideas?
  I have run the download screen for more than 2 hours, but had to call it even if not to exceed my data plan. Of course, this should not take more than a few minutes?

  Hello, you please see if it works properly with the full installer instead which can be obtained at https://www.mozilla.org/firefox/all/

• How to create a task and then run it later?

  We have a requirement like this: we insert records into a table. After inserting records, we need a web service ping command and tell him to read the new records.

  We call the WS in a trigger after-insert-for-all-row.

  Can we create employment and in the trigger, use DBMS_SCHEDULER. RUN_JOB ('call_web_service', use_current_session = > 'FALSE') to perform the task?

  When we create jobs, we can use start_date = > null to indicate that we do not want to run the task now, but later?

  Hello

  Yes, you are on the right track. If it is a work intended to be run on demand, then specify a start_date/end_date, nor a repeat_interval.

  You can even create as disabled (enabled-FALSE online).

  Use DBMS_SCHEDULER. RUN_JOB ('call_web_service', use_current_session-online 'FALSE') every time you want to run the task.

• can I install a program on a disk, and then run and install on another

  can I do because I want to move some paid to a newer computer

  Hello

  You can't move a program installed to another location / car / computer.

  Programs must be reinstalled from the original (CD, DVD or downloads) media.

  See you soon.

• Hi guys, I bought a plan for using Photoshop and I can't download it. I received an email to verify my account after you pay, and then said: I will log in on creative cloud, I'm doing it, but it does not work, how can I do? Please someone help me

  I do not know how to connect creative cloud, and each time I try to discover by the website it shows just make me buy a plan (I already have)

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

  - and also read https://forums.adobe.com/thread/1146459