Resize each State a trigger in the Composition

Similar Questions

• Is it possible to a thumbnail of the slide show as a trigger of the composition of the layer so they both can be clicked on at the same time?

  I have a thumbnail of a slideshow in layers under a trigger of a composition. I have the opacity of the thumbnail defined at 0% so it looks nice and clean. I wish it works so that a user can click on the trigger and the tile at the same time. Is it possible through coding? Adobe told me that Muse can do by nature.

  Thank you!

  Conor

  No, it is not possible to click on two things at once. Custom javascript using you could trigger two events with a single click but with HTML/CSS, you can trigger only one.

• trigger for the insert statement

  Hello.
  I have a table, say, with 3 columns: ID, NAME, NAME_LENGTH.
  I am trying to create a trigger that fires when a record is inserted in the table.
  I send values for the ID and NAME columns per INSERT statement. and I need the trigger to write the LENGTH OF THE NAME INSERTED in the 3rd column
  
  CREATE OR REPLACE TRIGGER schema_name. GENERATE_length
  AFTER INSERT ON table_name
  FOR EACH LINE
  DECLARE
  F NVARCHAR2 (200);
  L NUMBER (5);
  NL NUMBER (5);
  NUMBER OF ID_LENGTH (5): = 5;
  BEGIN
  F: =:New.Name;
  
  L: = LENGTH (F);
  
  UPDATE HR_ORG_TREE
  
  SET name_length = NL;
  
  END;
  
  
  but does not work. error occurres as...
  
  ORA-04091: table schema_name.table_name is changing, the function of triggering/can not see
  ORA-06512: at the 'schema_name '. GENERATE_length', line 13
  ORA-04088: error during execution of trigger ' schema_name. GENERATE_length'
  
  Thank you.
  Sara

  CREATE OR REPLACE TRIGGER schema_name.GENERATE_length
      -- is "table_name" real name of your table?
      AFTER INSERT ON table_name
      FOR EACH ROW
  BEGIN
      -- this update will change all rows in HR_ORG_TREE table
      -- specify WHERE for this update
      UPDATE HR_ORG_TREE
         SET name_length = LENGTH(:NEW.name);
  END;
  

  Suppose your table_name is HR_ORG_TREE and you need to calculate the length of the name for just inserted row
  After maybe the code will be useful (not tested)

  CREATE OR REPLACE TRIGGER schema_name.GENERATE_length
      BEFORE INSERT ON HR_ORG_TREE
      FOR EACH ROW
  BEGIN
      :new.name_length := LENGTH(:NEW.name);
  END;
  

  Good luck

• Confusion in the order of line and statement-level trigger

  Hi can anyone tell me, if I create a trigger on the emp table as in order...
  
  BEFORE INSERTING... LINE LEVEL
  BEFORE INSERTING... LEVEL STMNT
  AFTER INSERTING... LINE LEVEL
  AFTER INSERTING... LEVEL STMNT
  
  
  that will be the order of execution of the trigers?
  How oracle will decide order?
  
  Please give me some documents related to the order of execution of triggers... thnx in advance... !

  PC says:
  Hello.. Obtained response on the order of... but 1 weird point I m feeling that

  in the case of, before insertion... stmnt fire triger level 1 then insert before... line.

  but in the case of after insert... fireing level trigger line then 1 after insertion... stmnt level...

  can you explain this also...

  Why is it so strange.

  You have a statement that you are running.

  The first possible thing is that you are 'before' the statement.

  The next thing that is possible is that the statement is executed for each line.

  So for each line, there is a 'before' to each line and a point "after" each line.

  Once the statement is executed, you are 'after' the statement.

  Thus, it makes sense the statement triggers surrounds education and line triggers are education, and of course 'before' comes before 'after '.

• VBAI: Fire a pulse each msec N based on the State of inspection

  The delay function VBAI seems to have the functionality I'm looking for, but that is so rude that the time is 1 second minimum.

  I have a camera intelligent (1772). I do an OCR inspection that could take a variable quantity a little time. I would like an ejector will trigger if the inspection fails. The ejector must fire on a set amount of time after which the camera fires. If I can't do reliable, so I need another controller in the system that I should not need because the camera smart shoulkd be more than enough. I know it can be done in the RT, but I like to keep things in VBAI to facilitate customer training.

  Sequence of operations:

  1. travel less than 1772 on a conveyor parts

  2 sensor triggers 1772 when a part is present

  3 image is acquired and processed. OCR inspection

  4. If the OCR inspection fails, the output pulse fire exactly 100 (for example) milliseconds after the onset of step 2

  5. Repeat step 2

  No idea how to achieve this in VBAI?

  Thank you

  Dan

  You might have a step to generate impulses before your acquisition where the impulse is configured to generate a pulse based on a trigger (so set up a continuous pulse and you wire trigger for acquisition to an ISO so input line that will trigger the output). Now, this is the important part... you must ensure that your treatment is carried out before 100ms or some delay that you specify or the pulse will begin. If you determine that you need not pulse according to your treatment, the transition to a State where stop you a generation of pulses on this line to stop it before that happens. In both cases, passage to the final State, and then the inspection can start again with the State which has run impulses/Acquire/processes and therefore the pulse reconfigure again for the next part.

  If this does not work for you, then you can try a timed SW approach. You might have a running LabVIEW step that gets a precise timer value during the acquisition stage ends, and another VI call waiting for a specified duration user (millisecond resolution) before it continues.

  I recommend the first option because it will be hardware timed (but requires additional cables), and if it does not, I can help you with a VI that will make the timed SW the desired behavior.

  Hope that helps,

  Brad

• Bug with the active State and normal state in the composition

  Hello

  I'm having a problem with the text on a composition between breakpoints. Here's an example: I the composition of new featured and I have a button with a font of 22 and then access a breakpoint and replace the police 16. The problem is that the button keeps the size of the text in the normal state on two breakpoints, but the active status changes to 16 for two breakpoints. I tried to change back the active State to a breakpoint at 22 and the other at 16, but it changes back to the last number used on the last breakpoint. Again, the normal State remains the same. Y at - it something I do or is it a bug?

  Hello Cristina,

  Please see Re: "Text on current breakpoint" button non-functional

  I would also add that the active state inherits the attributes to Normal State, so if you have your normal formatting through the breakpoints set in place as desired (for example, 22px for a breakpoint and 16px for another breakpoint), the active State will, by default, use these settings.

  If, however, you're done by explicitly change the active status value so that it ends up enforcement at all breakpoints, you can return the default by pressing the "Reset default" button in the States Panel.

  I hope this helps.

  Abhishek

• Cannot resize/position of clips on the composition.

  I used the first Pro CS5 yesterday and it worked fine, but now when I open it I can't move or resize the clips on the composition. I searched every option and the settings and can't find anything about it. Anyone know what to do?

  With the effect controls panel, you can click on the name of the effect, in this case, Motion > scale (remember, click on the name) and you will get a Bounding Box.

  Good luck

  Hunt

• Resize canvas as a percentage of the width of a layer?

  Hello

  Is it possible to resize a canvas so that it is exactly 120% the area of selection? Or maybe 120% of the width of a layer?

  We have a lot of .psd files that have significant margins. I need to reduce them so that they have 10% of the height of the content as the margins on all sides, but each document is different width and height. So I need to select the content of the document, increase this area selected by 20% vertical (somehow) and then change width/height the title of the document so that only 10% of margin all around.

  Thank you

  Here is a clean script.  This script works only with version newer than CS2 Photoshop so that it uses the app.activeDocument.suspendHistory () method. to suspend the States in the history of Photoshop.  This method has been added to Photoshop scripts after CS2.  The script can be run with CS2 by simply using main();  It take time to learn how Photoshop works and how changes over time as updates are always added.  Know how Photoshop will allow you to record best actions and writing script that work well.

  if (documents.length < 1) alert("No Open Document!");
  else app.activeDocument.suspendHistory('Add Border', 'main()');
  
  function main(){
    var startRulerUnits = app.preferences.rulerUnits;
    app.preferences.rulerUnits = Units.PIXELS;
    var borderSize = (Math.max(app.activeDocument.height,app.activeDocument.width)/100) * 10;
    app.activeDocument.resizeCanvas((app.activeDocument.width + (borderSize*2)), (app.activeDocument.height + (borderSize*2)), AnchorPosition.MIDDLECENTER);
    app.preferences.rulerUnits = startRulerUnits;
  }
  

  Photoshop is a complex application and because of it how this script will work depends on layers in the active document and the current background color in Photoshop.   Photoshop supports a special layer called the background layer.  A document is not required to have a background layer.   Only the background layer in the layer stack can be a the "Background" layer for any of the layers can be underneath.  'Background' of Photoshop layer supports transparency its still partially locked for all pixels in a background opacity is 100% and the layer is the same size as the canvas size documents.  If you change a document the size of the canvas and the document contains a background layer that layer background size will also change.  The background can be cropped and enlarged.  When developed the added pixels will be the current background color in Photoshop.  So the added border can be any color or empty pixels. For documents are not required to have a background layer.  Other layer types support transparency as well as their size will not be changed. Basemap layers not can be any size and have a report l / h and have an alignment onto canvas documents. Him are anchored the outlines and the acts of canvas size as a clipping to the composite image mask.   When the new canvas is added to that alignment of the canvas can change this controlled anchor position is used for the canvas resize operation.  A border that is added to a document can not be empty or a solid color for the old canvas size might have pixels of clipping in some layers that are now is more cut and show in the composite.

• Run a level trigger line before a statement-level trigger

  Hello

  I'm trying to make sure that a row-level trigger fires before a statement-level trigger (the opposite seems to be the default!). Initially I tried to use the FOLLOWING Clause in the statement-level trigger, unfortunately, this has resulted in the following error message:

  Error: ORA-25022: cannot refer to a trigger of a different type

  I then tried to fix this using 2 triggers composed with the NEXT clause in the relaxation I wanted to run "second":

  CREATE TRIGGER trig1

  UPDATE

  ON table1

  COMPOUND OF TRIGGER

  UNTIL EACH ROW IS

  BEGIN

  ...

  BEFORE EACH LINE END

  END trig1;

  CREATE TRIGGER trig2

  UPDATE...

  ON table1

  As a RESULT, trig1

  COMPOUND OF TRIGGER

  BEFORE THE STATEMENT IS

  BEGIN

  ...

  ...

  END STATEMENT;

  Trig2 END;

  Two triggers compiled, but still of does not run in the order I want to do. Does anyone have an explantion for this behavior or a solution that triggers to execute in the order I want? I am using Oracle 11g

  Kind regards

  Kevin.

  Sounds like a unique constraint for me...

• Problem with trigger on the table

  Hello
  
  I have the table TEMP AS (NUMBER of SNO
  STATE VARCHAR2 (50).
  DATE OF UPDATE_DATE)
  
  I want to create the trigger on this table as each time that it is updated in the STATE of temporary table UPDATE_DATE updated columns.
  I am creating the trigger using the PRAGMA autonomous transaction, but it does not work with that and withouht PRAGMA.
  With PRAGMA I get the error message ' ORA-00060: Deadlock detected while you wait resource. "
  
  Is it possible to create triggers on this table to update columns in the same table.
  
  Published by: user6040008 on December 11, 2012 01:08

  Hello
  This is not a valid forum for questions like that. Thank you for using {forum: id = 75} forum. However, you can use following code:

  
  create or replace trigger xx
  before update of state
  on cabasys.temp
  for each row
  begin
  :new.update_date := sysdate;
  end; 
  

  Published by: kikolus on 2012-12-11 10:40

• Code of the trigger with the error table mutation

  I have 2 tables, cc_call_lists and cc_call_issues. I have a trigger on the table of cc_call_issues so that when the priority is updated I can determine how to set Issue_Priority.
  
  Basically, the priority update for an Issue_Id I need to update the I want to watch Issue_ids of all the participating on the cc_call_lists table and determine how to update the Issue_Priority column.
  
  Issue_Priority must always be the first priority of the table cc_call_issues for Issue_id records in the cc_call_lists table. So when I need to watch all changes priority priority values for which the Participant has records in the cc_call_lists table and take the max value priority after the record is updated.
  
  Unfortunately, I get the following error message when the trigger is activated:
  
  ORA-04091: table TTMS. CC_CALL_ISSUES is changing, function of triggering/can not see
  ORA-06512: at «TTMS.» UPDATEISSUEPRIORITY', line 30
  ORA-04088: error during execution of trigger ' TTMS. UPDATEISSUEPRIORITY'
  
  Is there a work around which is not too complicated? Any help would be greatly appreciated.
  
  
  Table: cc_call_lists
  Name
  -----------------
  PARTICIPANT_TYPE
  PARTICIPANT_ID
  LAST_ACCESS_DT
  LAST_ACCESS_BY
  CREATE_DT
  CREATE_BY
  MODIFY_DT
  MODIFY_BY
  CALL_STATUS
  CALL_PRIORITY
  
  
  Table: cc_call_issues
  Name
  -----------------
  ISSUE_ID
  ISSUE_DESCR
  DEACTIVATION_DT
  PRIORITY
  CREATE_DT
  CREATE_BY
  MODIFY_DT
  MODIFY_BY
  
  Trigger on cc_call_issues code:

  CREATE OR REPLACE TRIGGER TTMS.UpdateIssuePriority
  BEFORE UPDATE
  OF PRIORITY
  ON TTMS.CC_CALL_ISSUES 
  REFERENCING NEW AS New OLD AS Old
  FOR EACH ROW
  DECLARE
  tmpMaxPriority number:=0;
  
  -- Get list of all participants call queue records, existing priority who also have a participant issue record with this issue code
  cursor c1 is
  select a.participant_id, a.call_priority
  from cc_call_lists a, cc_participant_issues b
  where 
    a.participant_id = b.participant_id
    and b.issue_id = :new.issue_id
    and b.issue_status = '001'
    and a.call_status <> '003';  -- Not closed already
  
  BEGIN
      for thisone in c1 loop
              -- Get the existing highest priority
              select nvl(max(b.priority),0)
              into tmpMaxPriority
              from cc_participant_issues a, cc_call_issues b
              where
                a.issue_id = b.issue_id and
                a.participant_id = thisone.participant_id;
                
              -- Update it if the new priority value is higher than the existing call queue record priority
              if :new.priority > tmpMaxPriority then
                      update cc_call_lists
                      set call_priority = :new.priority
                      where participant_id = thisone.participant_id; 
              elsif :new.priority < tmpMaxPriority then
                      update cc_call_lists
                      set call_priority = tmpMaxPriority
                      where participant_id = thisone.participant_id; 
              end if;
      end loop;
  END UpdateIssuePriority;
  /

  Move the level of LINE at the STATEMENT level triggers, see:
  http://www.Oracle-base.com/articles/9i/mutating-table-exceptions.php
  http://asktom.Oracle.com/pls/asktom/asktom.download_file?p_file=6551198119097816936

• Trigger on the nested table - possible without sight?

  I have a table my_table that has a nested table column, DOC. I need a trigger that fires whenever a row in the nested table is deleted.
  
  I had initially hoped that a status UPDATE on my_table trigger would do the trick, but it doesn't. Then I created a trigger on the nested table.
  
  I can make it work if I create a table view and then make the trigger through this:
  
  "INSTEAD OF DELETE
  ON the TABLE IMBRIQUEE my_view DOC
  '
  
  and then to do the removal through the view:
  
  deletion OF TABLE
  (Doc SELECT FROM my_view where rowid = 1111);
  
  HOWEVER, I need this to work when the delete statement is directly through the table itself and not through the view. The delete statement is generated by an application that I can't control. I can only make changes to the database.
  
  deletion OF TABLE
  (Doc SELECT FROM my_table where rowid = 1111);

  Create the trigger on the nested table.

  create or replace type result_obj as object(subject varchar2(100), mark integer)
  /
  create or replace type result_tbl as table of result_obj
  /
  create table student(sno integer, sname varchar2(100), result result_tbl) nested table result store as result_tbl_tbl
  /
  insert into student values(10, 'Karthick', result_tbl(result_obj('English',85),result_obj('Hindi',70)))
  /
  insert into student values(20, 'Vimal', result_tbl(result_obj('English',75),result_obj('Hindi',90)))
  /
  select s.sno, s.sname,r.subject, r.mark
    from student s,
         table(s.result) r
  /
  create or replace trigger Result_Trigger before delete on result_tbl_tbl for each row
  begin
      raise_application_error(-20001,'You cannot delete this subject');
  end;
  /
  delete
    from
   table(select s.result
           from student s
          where s.sno = 10)
   where subject = 'Hindi'
  /
  

• DAQ trigger on-the-fly reconfiguration

  Hello

  What is the correct way to reconfigure a data acquisition on the fly?

  Every 100 s I'm doing a 2000 point 4-channel triggered acquisition (sampling rate 50000)

  As a function of household, that I also want to monitor the voltage of one of the channels so that every 2 s, I do a single-point acquisition no trigger.

  Since I don't have access to a piece of the DAQ hardware, that I have to share channels between the two tasks of reconfiguration on the fly.

  (the program is too big / complex to post sorry)

  Initialize channels and relaxation (happens once at the beginning of the program):

  

  Get data every 100 s:

  

  Each 2 s get one sample of multichannel without triggering then restore the trigger:

  

  Please could someone explain when I have to use the 'task to start', 'stop task' and 'commit' aid is rather vague and unfortunately I find myself 'hacking' until it works, which is not the way I like to work! I use a USB-6211.

  The above program works OK, but has an intermittent (approx. every 10mins) error on the 'shutdown task"before returning to the trigger. (memory, the description was 'Task not over data acquisition')

  Thank you

  Al

  Al1234 wrote:
  ... Then this job is stopped and the original task is reconfigured...

  Al

  Simply set up once and just start and stop the job.

  I'm a guy sorta visual images will help us to help you.

  Ben

• Computer seems to do a lot of thinking before running each statement. There are files missing or damaged?

  Original title: is there a way to know if my copy of windows is missing files, etc?

  My computer seems to do a lot of thinking before running each statement checked upload / speed download, everything is fast, must be my corrupts, could be operational with missing or damaged files, anyway to check?

  Hello

  1. Are you referring to the performance of the computer?
  2. What antivirus application do you use?

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Keep the computer in a clean boot and check the status of the issue. If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem. Continue with the remaining steps to pin-point on the third party service. After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: after you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  Method 2:

  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.

  You can also refer to:

  Maintenance tasks that improve performance.

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/maintenance-improve-performance

• Non riesco a generare I trigger by the journal tables

  Buonasera,

  utilizzavo tables version 4.1.1 di Data model e riuscivo a generare I trigger by the newspaper, pero utilizzava sempre he nome di table "emp2."

  Nelle note della versione 4.1.2 release it era scritto che he bug era stato solved, pero adesso non riesco più a generare I trigger by the journal tables.

  You can help?

  Grazie

  Davide

  Hello Davide,.

  you are able to run the generation of 'test' as he explained here Oracle SQL Developer Data Modeler 4.1 user - defined DDL generation using transformation scripts

  Do you have a location in "preferences > Data Modeler"-"types of default system directory" - If there is a defined directory it can DM puts the script from that directory - scripts are in the file - dr_custom_scripts.xml. "»

  If you have not changed the scripts distributed with Data Modeler (or add new ones) so you can copy this file in the directory datamodeler\datamodeler\types of DM 4.1.2 installation to the directory defined in the preferences.

  In fact the problem in 4.1.1 DM was in the script itself always putting this 'EMP2' name in the definition of the trigger - line 66 should be modified in order to obtain valid results:

  old line 66:

  "WE DELETE emp2 for each line \n" +

  new line 66:

  "WE DELETE" + lname + ' for each line \n"+"

  Philippe