Resize the Partition Mac running two OSX

Similar Questions

• I resized the Partition Mac to make more space for BootCamp and now Windows will not boot

  On a collague MacBook Air running 10.11.4, we used disk utility to reduce the Mac Partition so that we could then use a Windows tool to extend the BootCamp partition. However, upon restart, we got a BACK screen with the error that Windows cannot start because it cannot find the boot device.

  Help, please?

  This is not a mechanism supported by Apple to change the size of the Windows partition. Apple supports the remove/reinstall only.

  We try to remedy. Please after the release of the following OSX Terminal commands.

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  What is the model/year of the MBA? Please, do not post the serial number of your Mac. Orders 'sudo' will ask for your password.

• EL Capitan - impossible to resize the partition in disk utility

  I'm having a problem with resizing the partition of my drive (background: I have 2 partitions, 350g for mac and 150g for bootcamp) I want to resize the mac one in order to free up space.

  in normal startup, disk utility tells me target disk is too small. startup recovery, he says 'successful' but nothing happens.

  any tips?

  See this topic Support of Apple

  Disk utility (El Capitan): partitioning a physical disk

  'Expand volume '.

  If you have several volumes on a device, and one of them is running out of space, you will be able to expand without losing the files it contains.

  To enlarge a volume, you must delete the volume that comes after him on the device, and then move the end point of the volume you want to enlarge in the freed space. You cannot expand the last volume on a device. »

• Cannot resize the partition to the desired size?

  I'm trying to resize a partition in the C drive of 15 GB and another one to 15 GB. However it gives me a value of maximum shrinkage of 8160 MB. I started to have only a maximum reduction of 79 MB value, but after disabling the system restore, run the Disk Cleanup Wizard, and the deactivation of page files I was able to get to 8160 MB. I have a 289 GB HDD with 137 GB free. I don't understand why it's only allowing me to reduce approximately 8 GB since I was 137 GB free. Any ideas?

  
  

  http://S352.Photobucket.com/albums/R351/jacobB12/?action=view¤t=Untitled1.jpg&newest=1

  http://S352.Photobucket.com/albums/R351/jacobB12/?action=view¤t=Untitled2.jpg&newest=1

  Hello

  These should contribute.

  How to make a partition in Windows Vista
  http://www.YouTube.com/watch?v=0iWEWysI6jY

  How to cut and create a Partition with Vista disk management
  http://www.Vistax64.com/tutorials/95398-disk-management-shrink-partition.html

  Create and format a hard disk partition
  http://Windows.Microsoft.com/fr-FR/Windows-Vista/create-and-format-a-hard-disk-partition

  How Partition in Windows Vista (extend and shrink)?
  http://www.LyteByte.com/2007/02/19/how-to-partition-in-Windows-Vista-extend-and-shrink/

  How to resize a partition on Windows Vista
  http://www.vistarewired.com/2007/02/16/how-to-resize-a-partition-in-Windows-Vista
  How to remove and extend a Partition with Vista disk management
  http://www.Vistax64.com/tutorials/95418-disk-management-delete-extend.html

  How to remove a partition on your hard drive?
  http://wiki.answers.com/Q/How_do_you_remove_a_partition_on_your_hard_drive

  Change or resize Partition (NTFS, FAT or FAT32) size in Windows Vista
  http://www.mydigitallife.info/2006/11/27/change-or-resize-partition-NTFS-FAT-or-FAT32-size-in-Windows-Vista/

  How to resize, extend, reduce, remove, Merge Partitions in Vista.
  http://www.WinVistaClub.com/T11.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Can not resize the partition on the Satellite A100-998

  Hello
  I am owner of toshiba satellite A100-998 with 200 GB hard drive. By default there is only 1 partition on the HARD drive when I try to resize this partition and create another 8 partition magic shows me error that it cannot write to the boot sector and it fails. I didn't install any software on this computer and it has the latest version of the bios.

  Ranish partition Manager displays the same error.
  I don't know what the problem is because I've done similar operations on multiple computers with all the problems.

  Thanks in advance for any suggestions

  Hello

  I also use the magic of 8 Partitions for creating and management of simple partitions on the HARD disk.
  But I wonder about the size of your HARD drive. As I know the Partitions Magic 8 does not support 200 GB HARD drive. I didn t to test but the partitions on the manufacturing site manual says it does not support.

  However, sometimes, I had similar problems with my 80 GB HARD drive. The simple solution was to defragment single partitions.

  I put t know if it will help you because of you HARD drive size, but you can try it.

• Resize the partition with unallocated forward space

  Any means of:

  
  1. reduce the partition and leave a space at the front?

  2 extend the partition using unallocated in the front space?

  Thank you!

  Partition Wizard Home Edition:
  http://www.partitionwizard.com/free-partition-manager.html
  Some of the features and functions include: resize and move partitions,.
  Restore the Partition after an accidental deletion, Delete partition, Create partition.
  Format partition, convert partition, partition Explore, Hide partition,
  Change the drive letter, a partition active Set.

  Download and use the bootable CD version.

  Just be aware that the first partition (usually hidden and only 100MB in size) contain the BCD store and it is need to start Windows 7, do not delete or move this partition.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• I resized the partition of C: Lenovo IdeaPad Y500 laptop with the partion of aomei assistant and now I'm not able to start.

  Original title: I messed UP WITH MY 8 PREINSTALLED VICTORY AND IT DOES not START NOW

  My lenovo ideapad y500 supplied with windows 8 pre installed. I wanted to set/resize partitions as the laptop has been delivered with a single partition (C :). after I resized with the partion of aomei Wizard something happened and now I don't am not able to start. my laptop has been delivered with the pre-installed operating system, and she had no DVD of win8. I dinot do the recovery disks either. Some say that the product key is injected into the bios) , so I neednt worry about losing the win8 original license. any means now what shud I do to get reinstalled 8 victory! where can I download an image of victory 8 to install?

  LENOVO has this option of key recovery is not working too now that I changed the partitions. (IE it works if the partitions are unchanged)

  Help, please!

  You have an OEM key - make sure that it is the OEM version of win8.

  Lenovo has a drive engineering key which one of its options is to repair the functionality of the button a magical touch.

  Ask in the Lenovo forum if they can direct you to the download of recovery engineering key a repair disk and how to fix your recovery button.

  http://forums.Lenovo.com

  Can you get to a command prompt to start with a system repair disc or the installation or the upgrade disk...

  and taste the repair orders bootrec.exe/fixboot would be a good idea to start with.

• Cannot download CC animate the recent Mac running Yosemite

  I spent the best part of two days trying to download and install Adobe animate CC on my Macbook. I uninstalled and reinstalled more creative cloud several times, but my control window creative cloud don't even list of APPS as one of the tabs. When I try to download directly from the Adobe site, the page says 'Download now', but there is no evidence of the software download at all. I have a very fast (100 Mbps) connection and have run the computer for hours to acquire the software. Any suggestions?

  The creative cloud desktop application has been updated a few days ago. Could be useful to download from this page, leave the current version and install the new. I had problems with the Apps menu selection until I did this:

  https://www.Adobe.com/creativecloud/desktop-app.html

• Can not resize the partition to external hard drive

  I have a LaCie D2 Quadra 1 TB external drive that I used occasionally since 2009. Way back when I partitioned into two parts, the two put in place under Mac OS X extended (journaled). I put one in 867 ~ GB and the smallest to 133 ~ GB. The smallest one I use for a bootable backup.

  I want to increase the size of the bootable part. DiskUtility looks that would, without erasing any data. But even once I selected for the largest part smallen (without going into the blue "in use" section) I can't always increase the size of the bootable. The grabber resizer indicator seems pointless because it won't pull up. (It's in the lower corner of R).

  I made sure property allows me to read and write on both partitions.

  I will be grateful for a solution.

  

  MBPr mid2012 OS X 10.8.5

  2.3 GHz Quad-core i7/16 GB/256-Flash

  16 GB OF RAM

  Hello

  Have you highlighted partition LaCie Albums & has even decreased its size?

• Cannot start windows after trying to resize the partition.

  I tried to use utility disk to increase the size of my windows partition, of course, broke TI boot camp should have read this on the community before the trial.

  I use all the solitaire t controls, including the following

  Fdisk e/dev/disk0

  p

  setpid 4

  07

  Pavilion 4

  p

  To write

  There

  That did not help, I don't see windows when I hold down the option key. The windows partition exist again, however, which is good. Also, I turn off csrutil, I use the latest version of Mac OS X

  diskutil list

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 251,0 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 165,1 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 85.0 GB disk0s4

  Cs diskutil list

  No logical volume group CoreStorage found

  sudo TPG - vv - r see the/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 251000193024; SectorSize = 512; blocks = 490234752

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 490234751

  start index size summary

  0 1 MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 322541752 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  322951392 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  324220928 166012928 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  490233856 863

  490234719 32 table dry GPT

  490234751 1 dry GPT header

  Udo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 30515/255/63 [490234752 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 0 0 2 - 25 127 14 [1-409639] < unknown ID >

  2: AF 25 127 15 - 1023 254 63 [409640-322541752] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [322951392-1269536]

  * 04:07 1023 254 63-1023 254 63 [324220928-166012928] HPFS/QNX / TO THE

  Help, please.

  Please after the release of

  sudo dd if = / dev/rdisk0s4 account = 1 2 >/dev/null | hexdump - C

  Since there is no extra partition now, did you remove using disk utility?

• How to resize the partition on Portege M400?

  I tried Paragon Partition manager (bootCD).
  But when I loaded CD, Partition manager does not see the hard drive of my Portege M400
  Are there special drivers or software to perform this task?

  Are you using Vista or XP OS?

  If you are using Vista OS, you can change the size of partition n disk management
  Simply reduce the existing partition and then create a new free space or simply add the free space to another partition.

  If you are using the XP I would recommend using the tool called Partition Magic 8.
  http://www.Softpedia.com/get/system/hard-disk-utils/partition-magic.shtml

  It s a wonder full tool that supports many useful features!

• How to resize the Bitmap when running?

  Hello

  I created a Bitmap that reads directly from a file. The actual size of the image (test.png) is 360 x 50. I displayed this bitmap image in a BitmapField.  Now, I want to display this image in my application so that it should take the width of the screen and adjust (expand or compress) so based on the TILT of the device (in the case of BB storm). My code is as below:

  {
     Bitmap image = Bitmap.getBitmapResource("mainmenu_green.png");
      BitmapField bmpMainMenu = new BitmapField(image);
  
      MenuScreenVFM verticalManager = new MenuScreenVFM();
      verticalManager.add(bmpMainMenu);
      add(verticalManager );
  }
  
  //MenuScreenVFM  Class..
   static class MenuScreenVFM extends VerticalFieldManager
   {
          // Constructor
          private MenuScreenVFM()
          {
              super(Manager.VERTICAL_SCROLL | Manager.VERTICAL_SCROLLBAR | VerticalFieldManager.FIELD_HCENTER);
          }
  
         net.rim.device.api.ui.container.VerticalFieldManager#sublayout(int,int)
           */
          protected void sublayout(int width, int height)
          {
              int nTop = 65;
              Field field = getField(0);
              layoutChild(field, Display.getWidth(), 40);
              setPositionChild(field, 0, nTop);
              setExtent( Display.getWidth(), Display.getHeight());
          }
  }
  

  The image must stretch/compress based on the width of the screen. Any info/code would be really appreciated.

  Thank you

  -DK

  I created a CustomBitmapField extends the field and for the scaling of the image, I used the following code:

     public static EncodedImage scaleImageToWidth(EncodedImage encoded, int newWidth) {
               return scaleToFactor(encoded, encoded.getWidth(), newWidth);
     }
  
      public static EncodedImage scaleImageToHeight(EncodedImage encoded, int newHeight) {
             return scaleToFactor(encoded, encoded.getHeight(), newHeight);
      }
  
      public static EncodedImage scaleToFactor(EncodedImage encoded, int curSize, int newSize) {
           int numerator = Fixed32.toFP(curSize);
           int denominator = Fixed32.toFP(newSize);
           int scale = Fixed32.div(numerator, denominator);
  
           return encoded.scaleImage32(scale, scale);
      }
  
    protected void paint(Graphics graphics) {
          graphics.setColor(backgroundColour);
          graphics.drawImage(0, 0, Display.getWidth(), fieldHeight,   this.scaleImageToWidth(bmpBG, Display.getWidth()), 0, 0, 0);
             }
  

  I would like to know if it works... If works please set Bravo... that will encourage those who post the solution

  Kind regards

  -DK

• Resize the C partition in RAID 1 array.

  I have a new Dell Poweredge T320 with 710 RAID controller.
  The computer running Windows Home Server 2012 Essentials.

  It has two 500 GB HDDs in a RAID1 configuration.  80 GB is allocated

  for drive C (OS) and the rest to D, a data reader.

  I want to resize the C drive to 120 GB to have head room.

  Under WSE, I deleted the D partition and tried to expand the C partition, but that

  did not work.

  How should I do for this?  A glance through the manual Perc has not

  show obvious way to resize the partition.

  Thanks in advance,

  Andrew

  I've expanded the C drive.

  I was using the wrong tool.  I had chosen to manage after right click on the line of the COMPUTER in Windows Explorer and got a management tool very different than what I was used to and could not extend the partition.  I arrived at the family management tool in the field of computer science administration, and it has worked very well.  There are actually four partitions, a tiny 39meg OEM partition, a RECOVERY partition / 3 gb and now a 120 GB C and the rest in D.

  Sorry to be so clueless.  I've never been exposed to any Server MS except Windows Home Server, and it's very different.

  Next step: Add two raid 1 virtual disks - a 2 TB and a 4 to.  I still have two empty hot berries.

  Thank you and sorry to waste your time.

• Snapshot before resizing the guest OS system partition, it will allow me to roll back if problems arise?

  I currently have an ESXi Server vsphere 4.0 with Windows 2003 Server comments on that operating system. And just to be clear, this virtual machine is a control area on the network.

  The problem I have is that the system partition (C drive on the guest operating system) is running out of room. I have plenty of room in the data store where the virtual machine, so I added 30 GB drive under disk space commissioning in additional virtual machine settings page. The configuration type is thick. So everything seems to work great so far, I see this space as unallocated within the guest OS.

  After some research, I found several tools that help me to inresizing the system partition to take advantage of the additional disk space. Specifically, I intend to use the dell (ExtPart) DiskExt utility to resize the partition in order to reduce downtime. Apparently, this tool works without restarting the Windows machine.

  My question is, if I make a snapshot before you try to resize the partition of guest operating system, this would allow me to go back and cancel any potential damage that resizing of disk can cause? I understand that I expected to be able to undo a change such as this with a snapshot, I just want to be 100% sure.

  And no, I'm not trying to use a snapshot as a substitute for a backup. I do a snapshot to reduce downtime in case of a problem.

  Any information on this would be highly appreciated.

  I guess I over thought the process a little too, so I tested.  Works like a charm.  extended to the HDD via the vSphere Client, created a snapshot, ran extpart extend drive C:, delete the snapshot.  VM, although not a controller domain and just a test VM, is functional and happy.

• How to open or convert the .avi file on old mac running OS.10.6.8?

  How to open or convert the .avi file on the old mac running OS.10.6.8.  We tried downloading several conversion programs as well as programs that run .avi, but everyone's message could not be opened on the mac or require a fee.  Anyone able to fix it.  We have great audio video file we need to convert.

  Try to use MPEG Streamclip; You can be told to install Perian or another component, or who does not open the AVI file. AVI is a container, not a format; no single component or codec will open all reviews, and some cannot be played or converted in Mac OS X.

  (142484)