Resizing in prompt screen has stopped working

I use Fusion 8.1 on an iMac and have invited Ubuntu 15.10. Automatic resizing of the screen worked fine until today - IE, I could get the resolutions of arbitrary screen just by resizing the window. But after the update of Ubuntu, which has stopped working. Now, it is a fixed resolution, as set out in the Ubuntu community.

I deleted and reinstalled VM tools, but that didn't make a difference. A reflection as to where I expect next?

Hello

With the latest version of Ubuntu, you must not use the supplied VMware tools, but use Ubuntu open-vmware-tools package.

You must not only open-vmware-tools, but also open-vmware-tools-desktop computer for the actual integration of office.

(Sorry not a 15.10 nearby, ubuntu naming may be a bit off, try open-vm-tools if the above does not do anything in apt - get)

--

Wil

Tags: VMware

Similar Questions

  • U920T satellite screen has stopped working

    The screen has stopped working on a relatively new U920t. It displays second screen on the TV, but the actual screen shines in computer mode not all laptop or tablet.

    Any help in this matter would be appreciated.

    > It displays second screen on the TV, but the actual screen shines in computer mode not all laptop or tablet.

    This means that there is nothing wrong with the graphics chip on the motherboard, but without doubt the connection between the screen and map mother isn t OK or maybe the internal display is faulty.

    Is that it is a hardware issue and you should contact Toshiba authorized service provider in your country for repair.
    If the warranty is valid, the laptop must be repaired for free.

    Welcome them

  • Satellite A100 - screen has stopped working

    Hello

    yesterday in vista, he said that he detected an external monitor, even if I never used any external monitor to my laptop. In display properties, he said I had several monitors and in Device Manager it says that I had a pnp and a monitor not Plug-and-Play...

    The screen has stopped working after a reboot. I see nothing on the screen during the loading process indicating normally the toshiba and the vista loading screen. But once vista has started (the sound still works), the screen works again.

    This has me worried and I reinstalled vista from the cd, but now the screen never... never.
    But I know that vista has been correctly installed that after what he asked, can I still use alt + f4 and enter to stop.

    Well, I can't even make troubleshooting procedures on my own that never, the screen now works. -.-
    Does anyone have experience with this?

    Hello

    I've never heard of such question it s so very interesting to hear about this issue. Given that you never connected an external monitor, it must be something else...
    Did you ever done some update the BIOS on this machine?

    Maybe, if you have some, this could be the problem. Otherwise, I have a work around (it could be useful):

    Remove the AC adapter and the battery from the machine and leave the machine for some time (1-2 hours). Then, start the machine and check if it works.

    If this isn't the case, then you must send your machine to the service since it could be a serious hardware problem (I mean if you really reinstalled vista and problems persist after the reinstallation, then it IS definitely a hardware problem).

    You can also try some update BIOS if it is not already done...

    Welcome them

  • G72-a20EM screen has stopped working after updating the BIOS F.48.

    How is it possible that BIOS update recommended could turn off the LCD screen.

    Currently I see almost anything on the screen, but vga port works. But increasingly,.

    Intel graphics card is not recognized.

    G72-a20EM screen has stopped working after updating the BIOS F.48.

    What can I do to fix that?

    Good news!

    I found the working version, and it is version F.08.

    Supposedly new version have different Active cables, and this is the reason why the screen is dark.

    So, case closed, everything is perfect.

  • My HP Envy touch screen has stopped working after an update of the HP Bios yesterday

    Can someone tell me please how to fix my touch screen. I got an HP BIOS update which caused my touch screen to stop working. I tried to re - calibrate the it, but it does not accept my contact telling me that the screen is no longer enabled.

    I tried to find where to turn them on and couldn't find where to enable touch of the finger. I also tried looking for driver updates and driver seems to be up-to-date.

    Thank you

    I have another type of TouchSmart, but this may work for you:

    1. Press Windows + X logo (if you are using a Windows computer 8 - If Windows 7, click the Start button, type Device Manager and click on Device Manager in the results of research).
    2. Select Device Manager from the list.
    3. Click on the small arrow next to Interface devices to expand the list.
    4. Click the touchscreen driver (in my case, Voltron NextWindow touch screen).
    5. Right click and select Activate from the list.
    6. Click Yes if a dialog box asks if you are sure you want to activate the touch screen driver.

    On some models, it is unclear which device in the checklist of the touch screen. I read in other posts that some people have solved the problem by disabling and then re-enabling each device.

    If this does not work, you could try to go to hp.com (http://www8.hp.com/us/en/support-drivers.html) and click on driver downloads &.
    In the search field, enter your product name or number, and then click OK. Select your operating system from the drop down list under Select your operating system, and then click Next. If there is no graphic driver available under Select a download below, click on the plus sign next to the driver - graphics, and then click the name of the driver. In the information and download options window, click Download. Follow the instructions on the screen to download the driver. Restart the computer.

  • HP 15 laptop: touch screen has stopped working

    I have a HP TouchSmart laptop computer model 15-f010wm, product number J8A22UA #ABA, 8.1 with Bing 64-bit Windows.

    The first day of the 3-4, I used this computer it worked like a charm. I loved. Now a few times touchscreen will work for about 5 min and then stops or does not work. When it stops working, I get a pop up in the lower right corner that says: the last USB device not recognized USB device you connected to this computer has malfunctioned, and the window does not recognize. (I have not plugged anything in this computer but except the power cord)  When this happens and you go to Device Manager sometimes, there will be a yellow! triangle under the Human Interface Devices drop down and some times yellow! triangle will be under Universal Serial Bus controllers list down. And if you go to they system screen line Pen and touch passes to no. Pen or press enter is available for this view.

    I tried to do a system restore. Also, I did a test fast system and a comprehensive system. The results have been the primary battery check ok and all the others said past. And of course I can't make the screen test because the touch screen does not work.

    Please help me with this. My computer was a gift, my other is really old and was ready for an upgrade. I've never had problem with HP before.

    Hi @Jen81 ,

    Thank you for visiting the Forums HP's Support and welcome. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click on the link for the number of support in your region. They will be happy to help you immediately.

    Thank you.

  • touch screen has stopped working Samsung ativ 500 t, perhaps after upgrade to pro

    I have Samsung ativ pc 500 t. IT has been bundled with Windows 8 and worked perfectly. Last Thursday I have upgraded to Windows 8 Pro and a few hours later, on Friday he lost touch ability partially. Can I use the stylus (pen s), but I can't use the fingers. I have attached the device info on trh device I think should be linked to the touch screen with your fingers.

    Any help would be much appreciated. Thank you, David

    List of devices
    Created using DevManView

    Device Name Manufacturer Service Code of Type of device Name of Type of the device Device ID of Instance Location Capacity of Config flags Disabled Connected Peripheral register 1 time Device register time 2 The drive letter Driver description Driver version .inf File .inf Section Driver Date Record of pilot time
    HID-compliant device (Standard system devices)   HIDClass   HID\ATML1000 & Col01\4 & 2101be6d & 0 & 0000   0x000000e0 0x00000000 NO. NO. 13 12. 2012 0:33:49 13 12. 2012 0:33:49   HID-compliant device 6.2.9200.16461 Input.inf HID_Raw_Inst.NT 21 6. 2006 26 1. 2013 11:34:33

    Hello

    I use Samsung ATIV XE700T and win 8.
    Happens to me too after I uninstalled the current Wacom driver (7.1.0 - 8-Win8) then install (7.0.9 - 5 - Win 7).
    Then why I have installed Win 7 driver if I win 8 as an operating system?
    Well, my pen was not working on Adobe Flash Professional (worked nowhere else). So after that I installed the Win 7 driver it started working on perfect Flash too.
    I don't know if you've already discovered but if you plug a usb device, finger touch works for awhile, then again stops working. And the same thing happens when you plug the device you plugged in.
    As I am an Illustrator with the stylus on the Flash for drawing is a priority for me so I did re-install the driver for Win8 again.
    Solution:

    1. go to "Control Panel-> programs" and uninstall the driver current (ISD Tablet).
    2. restart your computer.
    3. download and install this driver.
    4 restart your computer.

    You're done!
    Kind regards
    Kemal KAYA
  • Pavilion 15-p097TX: brightness keys screen has stopped working

    I was able to adjust the brightness of my screen using the f2 + f3 key but all of a sudden they stopped working and I am not able to adjust the brightness of the screen from any place neither sign nor any other option tried some methods but they all failed

    Hello

    Try the following.

    Download the Intel HD graphics installer on the following link and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp68001-68500/sp68117.exe

    Once complete, download and reinstall the Chipset driver from the link below.

    http://ftp.HP.com/pub/SoftPaq/sp73501-74000/sp73543.exe

    Once completed the reinstallation of Chipset, do not restart requested, rather open your download folder, right-click on the Intel graphical installer and select "Run as Administrator" to launch the installation.

    When this is finished, stop the laptop.

    Disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

    Start Notepad and let Windows take over completely for a few minutes before checking.

    Kind regards

    DP - K

  • Touch screen has stopped working - HP Pavilion 23 all-in-one

    Touch screen no longer responds to any contact afer 9 months use.    Details of the said system - touch compatible HID "this device works correctly.

    Hi JohnSevenoaks,

    Welcome to the HP Forums!

    I read your post on how your touchscreen no longer work, and I would be happy to guide you to a resolution! To start, I have to ask you a few questions:

    • What is product and model number from your desktop?
    • What version of Windows you have installed on your computer?
    • Have you installed a new software or hardware on your computer recently?
    • Has your computer has completed its important Windows updates?

    In the meantime, please follow this document on the HP TouchSmart PC - troubleshooting problems of touchscreen Windows 7 or for Windows 8. This should help to determine if the problem is software or hardware related.

    Please re-post with the results of your troubleshooting, as well as the requested information. I look forward to your reply!

    See you soon!

  • : HP Quicktouch on screen has stopped working, computer will not remain once I connect.

    So looking at the forums and everywhere on the internet, I know this problem starts because of an update that I installed it. But what I'm trying to understand why my computer will not remain after that window opens after I connect, because it restarts whenever I log in. I became extremely frustrated with this issue and I really don't know what to do. of course, there is the system restore, but that work? I can't find quicktouch in my list of programs to uninstall in safe mode, because this is the only mode that will allow me to stay very long. so if anyone has the answer please help me, it's super frustrating.

    Hi cavalierfanatic247,

    Thank you for using the Microsoft answers Forum.

    Start on Safe Mode desktop.

    Remove the update that caused the broadcast of programs and features in Control Panel by clicking View installed updates.

    If you are not able to remove the update, use the utility window cleaning to remove the update. See the link below:
    http://support.Microsoft.com/kb/290301

    If the steps above did not fix the problem, try to restore the system to a previous point before windows update when it worked fine.

    To restore the operating system to an earlier point in time, follow these steps:

    Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

    In the System Restore dialog box, click on choose another restore point and then click Next.

    In the list of restore points, click a restore point created before you started having the problem, and then click Next.

    You have an Essentials and HP drivers disk?

    If the system restore is not enough, you can use the HP Essentials and the disk drivers to uninstall and reinstall the quick key.

    Click Finish.

    You can see the link below for more information:

    http://support.Microsoft.com/kb/936212

    I hope that this will really help you, good luck.

    Kind regards
    Manasa P-Microsoft Support

  • Pavilion g7, Windows 7, screen has stopped working.

    The last time that I was able to use the computer, I checked email (AOL), then close normally. The next time the computer started very well, heard sounds of connection, but alas, screen was completely black and dead.

    I hooked to an external HD monitor and everything is fine, but neither sign nor AMD software will detect even the screen.

    Tried a restore back a few weeks but no luck, still no screen.

    The video card is dead? and if so, how easy/costly to replace.

    I'm a little discouraged because I bought only this month of August.

    Curious in Cincy.

    I understand that you want to know if the video card is dead.

    If an external monitor works without any problem, then it is the LCD and not the video card.  If the video card has failed, no monitor would have worked.  It's a great way to determine if a video problem is the video card or the LCD screen.  This could be the Panel itself or the cable Ribbon itself.  You won't really know that it is until you open to discover.  In all cases, the water was connected to the LCD screen and is not available separately.

    If it is under warranty, then I would contact HP for service.  If this isn't the case, then you can contact HP for a quote and compare that to the price of the local PC stores.

    If you are savvy enough to replace the LCD, then you may be able to replace the supplied Panel you can find the right parts.

    What is the number of product of the laptop?  This should be found in the same place as the serial number.

    NOTE: Provide NOT the serial number.

    If you are interested in an auto repair, I was able to find the right part number of HP for you to be able to find the right parts.

  • On the display screen has stopped working - no icons

    I've recently updated some drivers, including Power manager and driver of the power manager and the integration of more hot features package.

    The OSD has been updated to ' 6.60.01 '-> '6.60.03'

    Now, I get none on the screen icons when I change the brightness or volume, or buttons mute speaker mute mic. None of my keys Fn + Fx raise the pop ups. Although the brigantines and volume keys buttons and Fn + F4 sleep key work.

    I have X 220 Tablet under Windows 7 64-bit.

    I tried to uninstall and reinstall the package and rebooted the PC by following the instructions.

    Help, please

    Thank you

    solved, found out it was the antivirus

  • My wife has a Mini IPAD and the touch screen has stopped working. If anyone has had similar problems and if so is there a cure?

    HHas someone at - he had problems with the IPAD MIni touchscreen unresponsive? If so, can we do anything to fix the prob?

    Try these standard troubleshooting steps in the following order:

    Reset: Press the home and power buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds). No data will be lost.

    Catering: Connect your device to iTunes on your computer, backup, and then select factory restore.

    See here for more details on the restoration: https://support.apple.com/en-us/HT201252

    If none of these work your device could have developed a hardware problem. Contact Apple technical support: http://www.apple.com/contact/

  • R61i: Generator message to ThinkPad screen has stopped working

    Installed Vista SP2 update and now get this error on startup.  Know a fix?  Thank you.

    UN installed SP2 and the problem disappeared.

  • Menu of Options of blackBerry Smartphones has stopped working

    My article 'Options' in the menu on the main screen has stopped working.  It is to the context menu that appears when you press the BB.  It allows you to change the wallpaper and rearrange the rows and columns of icons.  It works once after I reboot by removing the battery.  I put the background (once) and the configuration of the icon (once).  This works in other apps like mail and browser. On the main screen you can press it, but it does nothing.

    Any information would be appreciated.

    It is a bug.  I spent some time with Verizon and Blackberry on it.  I suspect that his establishment when the OS patch was released.

    Blackberry support is excellent.  I suggest, if you're having some real problems, give them a call.

Maybe you are looking for