Resolution is lower when the monitor is connected to the laptop

Similar Questions

• Magic of the network hit all the computers off line when the laptop wireless on signs

  I have Network Magic V. 5.1.9055.0, a G from Linksys WRT110 wireless router. Online at any time may be all or part of the next list computers/gamers, computer hand Win XP sp3 is connected to the router, Samsung clp300 printer lazer connected to the main computer as a server, Vista sp2 office connected to the Wii, PS3 wireless wireless router and laptop Vista sp2 wireless. Whenever the laptop wireless comes online, it will stop magic network until the wireless is fully initialized and online, it strikes all onlines offline until there is a full boot of the wireless.

  Very frustrating since we went all the cisco and spilled a belkin router that worked perfectly with the above configuration. (unfortunately I gave the belkin far and no longer have access to it or I would have released this new linksys and would be happy to once again) I don't understand why cisco units cannot work together in harmony?  In any case, I can't find any info on the help of linksys or the magical sites network which brings me to this forum. Need help, please notify...

  I removed NM v5.1.9055 three computers and re-installed to v 5.5.9118. inserted my key and re started to each of them. When the laptop wireless started it off the other two for about 3 minutes until the phone was fully charged while we were back on the line. The poster always online in the map view, the internet router is and the laptop (Vista) shows online, but the report to other computers (1 XP and 1 Vista) shows red and offline. Always frustrating because it's all working without error until I installed the linksys cisco router then the trouble started... still need help...

• CC only opens when the laptop not linked to internet

  When the laptop is connected to the internet Creative Cloud opens and allows me to launch Lightroom. However when the laptop is not related to internet, all I get is error screen that says I am offline and needs to connect to the internet again. It is not related to the day 30 'Refresh' which is required to check that my monthly payment has been processed. I use the Windows 8.1 operating system and CC build 2.2.129. The problem when the McAfee virus protection is active or disabled. What I've noticed is that sometimes when I start to creative cloud the "trial of the Star' button appears but when I click on the program solves the problem when I open Lightroom."

  I spent hours on the phone and via the Adobe Support chat link and they can not get this to work. I even they gave remote access on my device. I've seen other posts in the same direction, and despite the suggested fixes, the problem persists. It becomes very frustrating because I'm doing wildlife photography and it's a challenge when in the African Bush with no connectivity.

  When not connected to the internet, please try running the installation location apps.

  For more information, please see a launch Adobe Creative Cloud apps

  Hope this will help you.

  Kind regards

  Hervé Khare

• Satellite Pro L650 - 1 L 4: battery will be discharged when the laptop is disconnected

  Hello together,

  I have a problem with my 5 month old laptop Satellite Pro L650 1 L 4.

  When the laptop is unplugged it will pay the battery. About 44% within 24 hours.

  Of course, options like BIOS "Wake we Lan ' and something like which are completely disabled.
  And of course the laptop is turned off completely and not the Sleep Mode.

  Any ideas?

  Kind regards

  Stephan

  Hello

  Please check if the wake-up on LAN is also disabled in the properties of LAN card (Device Manager-> LAN card-> properties-> Advanced tab).
  I also recommend checking the WLan card as well.
  Please also check if attached USB devices don't lose the power of the battery.

  But also a malfunction of the accumulator may be possible... so it has to be checked also...

• Why should keep the lid of the laptop closed when the laptop is not in use?

  Why should keep the lid of the laptop closed when the laptop is not in use?

  For energy conservation, to avoid dust and spills and damage the display.

• Want x 360 15-u111dx: Touchpad turns off when the laptop is on the side

  Hello

  I'm the kind of person who tends to use my laptop on the side while lying on my side. Have a 2-in-1 laptop makes things difficult when I stay in portable mode, but I put the laptop on the side. He starts from the principle I want to use it as a Tablet while it is still in laptop mode. The screen starts automatic rotation and the touchpad deactivates accordingly.

  Fortunately, I know how to disable the auto-rotation when this happens, but I don't know how to re-enable the touchpad when the laptop is on the side. Help!

  Hi there @lisanvo,

  I looked into the different ways that you can use your laptop to see if the function to the HP ENVY x 360 on its side in laptop Mode was possible. I found a paper called HP ENVY x 360 Convertible PC - Maintenance and Service of Guide.

  If you look under external component identification on page 7, , you will see that it gives you three modes that allows this particular model.

  I also found that the tilt sensors and the dock will not to allow you to use that phone in particular in the service that you want to because it's a model that allows you to have capabilities of the tablet.

  I want to thank you for visiting the Forums from HP Support.

  Have a great day!

• The screen goes black when the laptop is disconnected

  The LCD on my DV6 becomes black when the laptop is disconnected the power supply cord.

  Help, please!

  Hi, have you checked the brightness on the energy savings?

• The problem that I have for a week, it is that my screen is fine when the laptop is plugged in but fades when it is not plugged in.

  I have a Samsung NC10 that I bought in 2008 and the problem I've had for a week, it is that my screen is fine when the laptop is plugged in but fades when not plugged in - it ' s like going to a brightly lit room, in a room where the lights are dimmed... What can I do to remedy this? My battery runs down? Can I us my laptop plugged it my battery die? I must admit that I left basically still my laptop plugged...

  Check the settings of the display under battery power and adjust accordingly - How to adjust the brightness of the screen under Windows XP.

• (Redirected) Power adapter green light turns off when the laptop battery is plugged into the laptop and does not load.

  Power adapter green light turns off when the laptop battery is plugged into the laptop and will not charge; If the laptop battery is not plugged into the laptop adapter it's still green and will charge the laptop.

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Tip: when you post a message, preferable to always include the computer model.

  Bev.

• Satellite P100-160 resolution goes down when the 2nd screen is connected

  Hi all

  I have a P100-160 equipped with Intel 945 express chipsets for graphics. Whenever I connect to my laptop to an external display, it reduces the resolutions available for the external monitor and laptop to 800 x 600 and 1024 x 768. There are no other options. I KNOW that the graphic card can support a higher resolution for an external monitor that.

  I tried all the sense of starting and restarting with the monitor plugged in and out, I updated to the latest drivers and and I flashed the BIOS with the latest version of the BIOS without result. There is not even in the BIOS to change display settings.

  Someone has encountered this problem before?

  Hello

  The favorite of the external resolution can be chosen IF the graphics card chip and graphics driver support this resolution.

  In your user manual, you can find information about what external resolutions are available and taken in charge on this laptop.

  Did you check that?
  If this is not the case, do it!

• How can I click apply when switching back resolution lower when the window does not display the Apply button when

  How can I click apply when lower resolution when the window does not display the button apply because the resolution is too low

  Hello

  Try pressing the ENTER key on the keyboard instead.

  See you soon.

• Cannot get the resolution of 2560 x 1600 Dell U3011 connected to M4600 laptop with NVidia

  My setup:- Dell U3011 30'' IPS monitor- Dell M4600 Laptop with NVidia Quadro 1000M - Simple E-Port replicator model PR03X- OS: Ubuntu 12.10, kernel 3.5.0-21, 64-bit (I know it is not supported officially, RHEL is, so I guess there should be a way of getting it work)- Drivers: NVidia proprietary drivers 304.48 (also tried with 304.60)- X.org version: 1.13
  

  According to the specs the monitor should be capable of doing 2560x1600 through DVI-D or DisplayPort.
  

  The problem is: I can't get it to work with DisplayPort even if directly plugged to the laptop. The Nvidia driver seem to detect DP properly, although it doesn't detect the monitor. It only detects the laptop LCD display. If I go to Nvidia Settings, there is no eternal monitor listed.
  
  What I tried and what did not work:
  

  • Turning off the optimus in the Bios
  • connection of the monitor first, then reboot,
  • start first then connect the monitor
  • by pressing Fn + F8 several times
  • go to Nvidia settings and press "Detect displays" - the monitor is off "sleep mode" for a certain time but past sleeping within a few seconds later, nvidia does not detect
  • installation of different versions of nvidia drivers (the most recent, I tried was 304.60
  • completely uninstall the Bumblebee (optimus is disabled in the bios though)
  • using the open-source drivers again (they don't seem to not work at all, even for the computer screen)
  • Delete entirely xorg.conf file

  X.org logs:
  
  [    25.551] (II) NVIDIA(0): Creating default Display subsection in Screen section<------>"Default Screen" for depth/fbbpp 24/32[    25.551] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32[    25.551] (==) NVIDIA(0): RGB weight 888[    25.551] (==) NVIDIA(0): Default visual is TrueColor[    25.551] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)[    25.551] (**) NVIDIA(0): Enabling 2D acceleration[    25.561] (II) NVIDIA(GPU-0): Display (LGD (DFP-0)) does not support NVIDIA 3D Vision[    25.561] (II) NVIDIA(GPU-0):     stereo.[    25.562] (II) NVIDIA(0): NVIDIA GPU Quadro 1000M (GF108GL) at PCI:1:0:0 (GPU-0)[    25.562] (--) NVIDIA(0): Memory: 2097152 kBytes[    25.562] (--) NVIDIA(0): VideoBIOS: 70.08.54.00.01[    25.562] (II) NVIDIA(0): Detected PCI Express Link width: 16X[    25.562] (--) NVIDIA(0): Interlaced video modes are supported on this GPU[    25.605] (--) NVIDIA(0): Valid display device(s) on Quadro 1000M at PCI:1:0:0[    25.605] (--) NVIDIA(0):     CRT-0[    25.605] (--) NVIDIA(0):     LGD (DFP-0) (connected)[    25.605] (--) NVIDIA(0):     DFP-1[    25.605] (--) NVIDIA(0):     DFP-2[    25.605] (--) NVIDIA(0):     DFP-3[    25.606] (--) NVIDIA(0):     DFP-4[    25.606] (--) NVIDIA(0):     DFP-5[    25.606] (--) NVIDIA(0):     DFP-6[    25.606] (--) NVIDIA(0):     DFP-7[    25.606] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock[    25.606] (--) NVIDIA(0): LGD (DFP-0): 330.0 MHz maximum pixel clock[    25.606] (--) NVIDIA(0): LGD (DFP-0): Internal Dual Link LVDS[    25.606] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock[    25.606] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS[    25.606] (--) NVIDIA(0): DFP-2: 165.0 MHz maximum pixel clock[    25.606] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS[    25.606] (--) NVIDIA(0): DFP-3: 165.0 MHz maximum pixel clock[    25.606] (--) NVIDIA(0): DFP-3: Internal Single Link TMDS[    25.606] (--) NVIDIA(0): DFP-4: 480.0 MHz maximum pixel clock[    25.606] (--) NVIDIA(0): DFP-4: Internal DisplayPort[    25.606] (--) NVIDIA(0): DFP-5: 480.0 MHz maximum pixel clock[    25.606] (--) NVIDIA(0): DFP-5: Internal DisplayPort[    25.606] (--) NVIDIA(0): DFP-6: 480.0 MHz maximum pixel clock[    25.606] (--) NVIDIA(0): DFP-6: Internal DisplayPort[    25.606] (--) NVIDIA(0): DFP-7: 480.0 MHz maximum pixel clock[    25.606] (--) NVIDIA(0): DFP-7: Internal DisplayPort[    25.606] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display[    25.606] (**) NVIDIA(0):     device LGD (DFP-0) (Using EDID frequencies has been[    25.606] (**) NVIDIA(0):     enabled on all display devices.)[    25.607] (==) NVIDIA(0):.[    25.607] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"[    25.607] (==) NVIDIA(0):     will be used as the requested mode.[    25.607] (==) NVIDIA(0):.[    25.607] (II) NVIDIA(0): Validated MetaModes:[    25.607] (II) NVIDIA(0):     "DFP-0:nvidia-auto-select"
  
  What works "partially":
  

  • Connect the monitor using the VGA cable. So I'm able to get resolution of 2048 x 1240, but the picture quality is bad, it's blurred. Not a solution, really. In this context the NVidia driver detects the monitor as U3011 correctly.
  • Connect the monitor using DVI - D (dual link) cable through the dock station. In this context the NVidia driver detects the monitor as U3011 correctly, TwinView works very well.
    However, I get only 1600 x 1200 resolution as the highest option (not even the 1920 x 1200 which is supposed to work with DVI single-link).
    May be that the docking station does not support DVI dual link?
    The connector on the back of it is dual-link for sure, but perhaps there is no connection of double bond between the laptop and the dock?
    Unfortunately, the laptop has a DVI - D, only HDMI, VGA and DP connector, so I can't try a direct connection.
    Or maybe the driver is misdetecting dual-link as a single link connection, and in fact, it might be possible to force it to use the pixel dual-link clock?
  What to try next? Please help, because so far my new U3011 is useless... :(

  OK, so finally I thought, after reading a thread on some Dell 27 "monitor problems DisplayPort (really scary thread, shame on you, Dell).

  The solution was to turn off the monitor, * unplug it from power * and leave it in that State for some time. Now, it works fine, if connected both via the docking station as well as directly. Also, there is no problem with going back to suspend / sleep.

• No Internet connection when the laptop is off mode "Eve".

  When I close the lid on my laptop (which puts the computer into sleep mode) or he falls asleep with the lid open, there is no internet connection when I wake the computer.  I have to either run the Troubleshooter or perform a reboot to get connectivity.  This problem just started and I got the laptop almost 2 years. It runs on Windows 7.  I don't know much about computers.  Does anyone have any suggestions?

  When out of standby or hibernation, your wireless network connection can not reconnect if power on your wireless adapter options are set to a power saving mode. To check or change your current power options, follow the steps below for your operating system:

  1. Open Power Options by clicking the Start button, click Control Panel, clicking system and security, and then clicking Power Options.
  2. Next to your currently selected power plan, click change plan settings, and then click that to change advanced power settings.
  3. Click to expand wireless adapter settings section, and then click to expand the Energy saving Mode section.
  4. If the setting is currently nothing else that "Maximum Performance", click it, and then select A maximum Performance.

  You can also set the setting on drums on "Maximum Performance". For more information on power management, see the feature page of power management on the Microsoft Web site.

• HP laptop: photo monitor when the laptop is first turned on.

  How can I change the screen image that appears when the computer is switched on initially. My computer took a picture and I can't seem to find where to change.

  I have a 71 year old mother-in-law who thinks that his computer is the internet. Laughing out loud

  The image you see first when you turn on your PC is the lock screen. Sign in as normal and then move on to the settings by dragging the mouse from the right, click on 'settings' and then 'change PC settings.

  The next screen should come with 3 photos. T it? The top is lock screen. Left click on it and the page should change a bit. There are 5 images under your present lock screen image. You can select one of those, or click "Browse" to find another image that is on your computer to use instead.

  The image that is there now is stored on your computer somewhere, find it and delete it.

  I would like to know if it works.

• Touchpad inactive when the laptop is on the power supply current

  On my Toshiba Satellite laptop mouse (touchpad) is inactive when the power is connected, but only works on battery!
  The battery usually takes place during this period, but we can't use the mouse!

  How to solve this problem?

  Out of curiosity, but what model of laptop do you have?
  Are you using the original pre-installed OS that you got with your laptop?

  You can toggle touchpad by using the FN + F9 key combination?