Resolution of HDMI output?

Similar Questions

• HP Jet 11: Resolution of HDMI output / flow Max 11 HP?

  Hi, I just ordered the version of Windows 10 2015 11 flow HP and I thought using an external monitor with her to the House on HDMI. I like the look of a 2560 x 1440 resolution, I was wondering can the flow 11 this output over hdmi resolution? Thank you!

  Hello

  No, it only supports FHD 1920 x 1080 (or 1200).

  Kind regards.

• How to change HDMI output resolution in Windows 7?

  This is a new laptop Sony VAIO Y Series with Windows 7 Professional and a Samsung plasma TV.  Yesterday I connected my laptop and the TV with an HDMI-HDMI cable.  After that I went in Fn + F7 and selected "Projector" only, my desktop screen was successfully mirrored on my TV.   However, after I disconnected and then reconnected the cable, a dialog box appeared and asked me if I wanted to change my resolution of HDMI output.  While I felt fairly certain that my TV supports 720 or 768 only, I chose 1080 p.  (I realized it was a mistake.)  After doing this, the graphics in a video streaming box on MLB. TV is scrambled and very bad.

  So, I think I have to set my resolution of HDMI output for 768 or 720, but I can't determine how to proceed.  I scoured the foundations of knowledge and electronic bulletin boards without result.  I searched through my display settings and resolution.  I have made a restore of the system for the day before my error, also to nothing does not.

  When I right-click on the desktop and select 'Screen Resolution', then select the second (my TV) screen, the resolution drop-down list is 'greyed out', and I'm not able to change the setting, which reflects the 1366 x 768.

  Can someone please?  Thanks in advance for your time.

  Josh

  Hello, Ithilias

  Plug the HDMI and instead choose projector only, choose Extend.

  Now, return to the screen resolution of the screen and you should be able to change the resolution of the display of the second.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• U2515H monitor HDMI output cannot be set to the resolution of 2560 x 1440

  Hello

  I just bought two u2515h monitor at Dell.

  I have a PC with a graphics card ATI Radeon HD 5800, who have 1 HDMI port, 1 port DP and 2 DVI ports.

  So I have no possibility to use two DP, I connected the first monitor (u2515h) with mDP to DP cable included in the package of the monitor. I put the resolution of 2560 X 1440, without any problem with the DP connection.

  However, when I try to install the second monitor (u2515h) with HDMI to HDMI connection, I am only able to set a maximum resolution of 2048 X 1152. There is black space around the screen and the appearance of the fuzzy text, so I'm going in the CCC of ATI to increase the size to 0%, after doing some research online. He has only to enlarge the office. The monitor is still not able to use it is (2560 X 1440) max resolution via HDMI to HDMI connection, and the text are still unclear.

  I don't know what is the problem here, so I tell myself to ask the forum to see what I would do. Here are a few thoughts that I could solve the problem, please let me know how to solve this problem, as the lower resolution with a blurry text really annoy me for the second monitor.

  Specifications:
  -OS: Windows 7 64-bit
  -Motherboard: P7P55D PRO
  -Graphics card: ATI Radeon HD 5800
  -Monitor Setup: extend monitor Setup with two u2515h
  (1st with CDM [monitor] DP [PC] connection: max res 2560 x 1440)
  (2nd with HDMI to HDMI [PC] [monitor] connection: rest max 2048 x 1152)

  Problem:
  -Failed to set maximum resolution for the second monitor with HDMI connection.
  -Blurry text with the second monitor

  Possible solution:
  -I don't know if the port HDMI to u2515h resolution 2560 x 1440, or if it is the problem of cable?
  -Should I buy an mDP to HDMI cable so that the monitor can connect to my graphics card HDMI port? (If the problem is the HDMI are not support to set max res)
  -If the worst case scenario, I need to replace my graphics card? If so, can which option I find? I have an old motherboard P7P55D PRO

  Please help me to solve this problem, I really not sure what should I do, I better get some tips before buying anything useless to solve this problem.

  Thank you very much!

  U2515H HDMI is capable of 2560 x 1440. We need a resolution "custom" in the display of video card settings. I do not have these instructions AMD Ati and do not recommend to do because it involves changes to registry.

  A simple HDMI DP cable video card will not work. Those who aim to do the opposite.
  "Video card DP to HDMI monitor".

  There are active converters for HDMI DP video card to listen to, but they are not resolution 2560.

  My suggestion is to get another video card that has both DP and CDM ports.

• Satellite U940 - 11 c: East 1650 * 1050 resolution external HDMI possible?

  I am considering buying a U940 - 11 c and want to hook it up to a monitor 22 '' inches with resolution 1650 * 1050.
  Is - this external resolution (and others) supported?

  The specification States only the support of 1080 p signal.

  I use an external monitor 23 with a 1920 x 1080 max resolution, which is connected to HDMI output port.
  Since 1650 x 1050 is less than 1920 x 1080, I think that it must also benefit.

  You should know that the external resolution depends on external monitor and a graphics card.
  Both must support the preferred resolution.
  As far as I know the nVidia GPU, which is built in this notebook takes care of max 1920 x 1080 (full HD)

• Y510p - drivers nvidia HDMI output that's an analog connection

  I had occasional problems with HDMI output before, but can usually get things working in certain combinations to turn off TV and laptop.

  This time, however I can't convince them to talk together. I suspect that this may be due the new drivers (353.30).

  The control panel can see TV and recognizes that it is a LG TV, but TV shows only "no signal".

  I tried

  -the extension and mirroring of the display

  -changing the resolution

  but no luck. The only thing is that enter in the nvidia Control Panel, I noticed that the control panel is refers to the "analog display" and claims that he uses the VGA connector.

  Any ideas how NVIDIA persuage it's really a digital camera display via the HDMI connector?

  Thank you

  Mark

  Now fixed by the expediency of simple to try another HDMI cable :-(

• Acer Veriton N2620G-UC101X and no HDMI output?

  Recently got the product above and when I connect it to a TV via HDMI, no signal is received in the Inbox of Acer. Running Windows 7, 64 bit. Any ideas on how to fix?

  Thank you

  If this box does not have HDMI output, is there a DVI-> HDMI adapter that carries the sounds? (Wanting to use the Acer box as an XBMC client on my TV)

  Hello

  If the product comes with an HDMI port, then it should be able to connect via HDMI. Have you tried other HDMI devices to see if it works? The problem may be that the TV that you connect to can't stand is not the resolution of the computer trying to exit. You never have any signal when turning on/off the N2620G?

  DVI is not able to exercise sound and would be possible via HDMI.

• No HDMI output video output mode "DUPLICATE".

  I'm having a problem trying to get this laptop at the video output to the HDMI port mode DOUBLE.  In DOUBLE mode the frame buffer should be displayed on the screen of the computer AND it should display the video on the HDMI port, so it can be seen on a HD TV, and al.  What is strange, is that EXTEND and PROJECTOR ONLY modes work that proves the cable, HDTV, and the video port on the laptop works properly in these modes.  However, duplicate video mode is displayed on the screen of the laptop and no video out the HDMI port.  I know because the HDTV screen is empty with the exception that the HDTV displays the message "No Signal".  I have the latest firmware and installed video drivers.  Anyone who has an idea of what's going on?

  This computer is only 3 weeks.  This is the first time I tried to use the HDMI output on it.

  HP Pavilion dv7 - 6187cl

  Windows 7 64 bit

  I think that I found the solution to the question that I had.  The problem seems to be that the laptop seems to be driving the HDMI output on HDTV with a resolution of 1600 x 900.  This causes the HDTV to not be able to synchronize the signal from the laptop.  As HDTV does not recognize the resolution, the screen on it is empty.  However, even though mode DOUBLE, if you change the resolution of 1366 x 768 laptop, then the laptop and HDTV display video.  Curiously, although the HDTV can manage resolution up to 1920 x 1080 it is impossible to view the output of the laptop when it is set to 1600 x 900 mode DOUBLE.  If the PROJECTOR ONLY mode HDTV work very well in resolution 1920 x 1080.  In addition, when mode EXTENSION the laptop and the extended secondary display can be set to a resolution of 1600 x 900.

• GT620 in XPS8500 - no DVI or HDMI output issue

  Hello

  On my XPS8500, I can't the DVI or HDMI output ports correctly although VGA works OK:

  I use a LG 22 '' monitor with my Dell Vostro 200 with a card that had output DVI and it works well, but on the XPS8500 it gives no signal, I have uninstalled and reinstalled the latest Dell driver and removed hardware from the Device Manager, when I do that I find to restart the GT620 outputs the res 1650 x 1050 native until Win7 completely installs the driver and requires a reboot , upon restart, no signal is output. This happens on DVI and HDMI.

  While in this without signal condition VGA does not export until I have remove the HDMI or DVI monitor cable if something is turn off VGA at this time.

  Cranking up connected via a cable DVI or HDMI, there is no the Dell BIOS screen or the start of Win7 is... new VGA screen is fine.

  Is just crappy GT620 or am I missing the point!

  Well, I have an update for everyone with this kind of problem - my monitor is a LG 22LS4R, which is a monitor with TV tuner built in and after some research, it appears that some monitors (especially the monitor with TV tuner) report the correct EDID information (the info that the PC Gets the monitor to the determin the correct resolution is used etc.)

  I tried my XPS8500 / GT620 on my Sony 2008 32 '' LCD TV with HDMI and TV perfectly displayed at 1980x1080P, so I know that my graphics card is ok, it seems that my LG 22 '' monitor is not so happy with my new PC!

  Further reading shows tweaks people came up with to work around the problems of this kind, I tried, but couldn't make it work so I can either replace my new Board GT620 to my old ATI 2600XT (which does not work on my monitor) or to use VGA cable which works ok'ish or get a new monitor (hmm wife my not be too happy with the freshest!)

  So, I think that this problem is toward the low for older monitors with eccentric HDMI and my nVidia GT620 capabilities do not cooperate with it.

• PC HP Compaq 8100 Elite: How can I add to my PC HP Compaq 8100 Elite HDMI output

  I would like to use my PIP (picture in picture) of HD television feature newly acquired as a monitor for my PC HP Compaq 8100 Elite, which has no HDMI output. The PIP function requires a HDMI input.

  Is there a map update I can add to the PC HP Compaq 8100 Elite to provide me with HDMI?

  At any time.

  I am pleased to have been of assistance.

  There should be a driver disc in the box.

• HDMI output have suddenly stopped. Pavilion a6340a

  Hello

  I posted here in hope that someone can give me some advice.

  The system in Question is:

  • HP Pavilion a6340a desktop computer. Double heart
  • Vista 32 bit SP2.
  • NVIDIA GF8400GS
  • COMPRO Video mate Vista TV Capture card.
  • 2 GB of RAM.

  It is a bit of an older system, I guess, but it plays well as a HTPC for a while now. It has a small LCD monitor connected via the standard connection and a large flat screen Toshiba TV connected via HDMI. He did a great job.

  Today, the HDMI output just stopped. The Toshiba TV again to survey/is visible in the Nvidia Control Panel and the Vista Control Panel when it is connected to the HDMI. the implementation of the features of multiple monitors are available. But there is nothing happening on TV.

  Things has tried so far.

  • Two different Cables HDMI - nothing.
  • Connected my Pavilion Notebook DV6 on the same HDMI port on the TV - works fine.
  • Installed the latest driver from Nvidia - nothing.
  • Tried all the three HDMI ports on the TV - nothing.
  • Physically, shot the video card in the computer, he dusted off and reassembled it. -Nothing.

  I don't understand. Could this be a processor problem, or I have to pay for a new video card? Is it possible to test the output from the HDMI port with a multimeter or something? I do not understand why it would stop just like that. I just installed Vista SP2 a few weeks ago, but it was working well after I did.

  Any help with this would be greatly appreciated. The system is out of warranty, of course, but it has been a great HTPC for me. I stuck a blu - ray inside player and I was about to give him another 2 GB of RAM.

  Kind of useless now, without HDMI.

  IM at a loss. What else can I do to verify that Exchange of the graphics card?

  Hello

  The short answer is: replace the video card VNvidia GF8400GS. If you happen to have another video card around laying which has an output and HDMI, then install it for a test. It's the fastest way to solve the problem.

  Best regards

  EICO

• F5 will not read a map and will not HDMI output

  Hey guys, I'm new here and new to F5. I just got me second hand F5 and opportunity SXS pro + card (64 GB) and the camera is not picking up. When I insert the card, turns bright red media access, and then I get locked out settings. I get a cannot continue message when I try to do something. I don't get a message to format the card, and I don't think I can access the menu to format the card manually because I don't have a HDMI output power on my HD Gratical Zacuto. Any idea of what this could be the cause?

  
  

• Re: Satellite U400-145: no option to select HDMI as HDMI output default

  Hello

  I followed the instructions in the manual its leader to the topic on the HDMI output.
  However, when I go to the sound control panel, there is no digital output device (HDMI) listed only the Conexant Chairman and SPDIF outputs.
  I tried the default SPDIF output, which did not work.
  The HDMI works fine for the image, but the absence of the sound through it is driving me crazy.

  I'm running VISTA (fully updated) on a U400-145

  Someone at - it ideas how I can get the HDMI to appear as an output option?

  Andy

  Hello

  Go to the control panel-> Sound-> playback tab
  There, you have to click to the right.
  Then mark the options; Show all disabled devices
  Then you should see the HDMI interface.
  Now, you could activate and chose as the default value.

  Welcome them

• Qosmio G30-161: Cable for HDMI output on DVI input

  I have my G30-161 "HDMI" output as well as the analog out. I began to find a cable to connect it to the DVI to a TFT monitor, but seem to have trouble identifying which is the end "HDMI" cable connection. Does anyone know the formal classification of HDMI connector (or a UK power cable) I can be sure I buy the right cable?

  Thank you very much

  Phil

  Hello Phil

  Put? HDMI-DVI adapter? as keywords on Google and you'll find enough online shops where you can order one.

• Live streaming and own HDMI output on camcorder SONY consumer (HDR-PJ650VE in my case)

  Hi all

  I'm trying to figure out how I can live streams, using my Camcorder HDR-PJ650VE. I managed to connect the camcorder to my TV by HDMI out and get the live stream, but the problem is that it also displays the superimposed onscreen. It would be a very useful feature, since it this way, you are able to capture the stream by a jury of consumers capture and share it on Youtube for example.

  I cannot find anything on the manual release of the stream HDMI output and get rid of overlapping info. Is there a key combination or a hidden menu to achieve?

  In addition, it seems very strange SONY would not offer such feature, as for example the PANASONIC offers this good enough consumption walked on models like HC-V520

  Please, let me know if it would be possilb esolving this annoying limitation

  Best regards

  Matteo

  I want to share my discovery because it seems to be valid for all SONY camcorders: to have a clean HDMI out, turn off on HDMI CTR.

  I'm very happy now and I'll start live broadcast!